summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
authorRasesh Mody <rasesh.mody@cavium.com>2018-09-29 05:42:36 +0000
committerFerruh Yigit <ferruh.yigit@intel.com>2018-10-11 18:53:48 +0200
commitd5eb8edca2135501983246d6289e08c12fde45a1 (patch)
treedf6333ba4b84e4c143ded183dcc987f2b1085d35 /drivers/net/bnx2x
parentba7eeb035a5f442414f9dca6c12a9105a16576aa (diff)
downloaddpdk-next-eventdev-d5eb8edca2135501983246d6289e08c12fde45a1.zip
dpdk-next-eventdev-d5eb8edca2135501983246d6289e08c12fde45a1.tar.gz
dpdk-next-eventdev-d5eb8edca2135501983246d6289e08c12fde45a1.tar.xz
net/bnx2x: update link/PHY management
This patch has changes to update the link/PHY management (elink) code to the latest. Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x.h3
-rw-r--r--drivers/net/bnx2x/ecore_hsi.h20
-rw-r--r--drivers/net/bnx2x/elink.c7916
-rw-r--r--drivers/net/bnx2x/elink.h236
4 files changed, 5217 insertions, 2958 deletions
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 2d545f5..1cc5a6b 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -824,6 +824,7 @@ struct bnx2x_devinfo {
#define CHIP_ID(sc) ((sc)->devinfo.chip_id & 0xffff0000)
#define CHIP_NUM(sc) ((sc)->devinfo.chip_id >> 16)
/* device ids */
+#define CHIP_NUM_57710 0x164e
#define CHIP_NUM_57711 0x164f
#define CHIP_NUM_57711E 0x1650
#define CHIP_NUM_57712 0x1662
@@ -865,6 +866,8 @@ struct bnx2x_devinfo {
#define CHIP_METAL(sc) ((sc->devinfo.chip_id) & 0x00000ff0)
#define CHIP_BOND_ID(sc) ((sc->devinfo.chip_id) & 0x0000000f)
+#define CHIP_IS_E1(sc) (CHIP_NUM(sc) == CHIP_NUM_57710)
+#define CHIP_IS_57710(sc) (CHIP_NUM(sc) == CHIP_NUM_57710)
#define CHIP_IS_57711(sc) (CHIP_NUM(sc) == CHIP_NUM_57711)
#define CHIP_IS_57711E(sc) (CHIP_NUM(sc) == CHIP_NUM_57711E)
#define CHIP_IS_E1H(sc) ((CHIP_IS_57711(sc)) || \
diff --git a/drivers/net/bnx2x/ecore_hsi.h b/drivers/net/bnx2x/ecore_hsi.h
index 57085eb..1192e5d 100644
--- a/drivers/net/bnx2x/ecore_hsi.h
+++ b/drivers/net/bnx2x/ecore_hsi.h
@@ -500,6 +500,18 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_TX_DRV_BROADCAST_MASK 0x000F0000
#define PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT 16
+ /* Set non-default values for TXFIR in SFP mode. */
+ #define PORT_HW_CFG_TX_DRV_IFIR_MASK 0x00F00000
+ #define PORT_HW_CFG_TX_DRV_IFIR_SHIFT 20
+
+ /* Set non-default values for IPREDRIVER in SFP mode. */
+ #define PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK 0x0F000000
+ #define PORT_HW_CFG_TX_DRV_IPREDRIVER_SHIFT 24
+
+ /* Set non-default values for POST2 in SFP mode. */
+ #define PORT_HW_CFG_TX_DRV_POST2_MASK 0xF0000000
+ #define PORT_HW_CFG_TX_DRV_POST2_SHIFT 28
+
uint32_t reserved0[5]; /* 0x17c */
uint32_t aeu_int_mask; /* 0x190 */
@@ -783,6 +795,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722 0x00000f00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54616 0x00001000
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834 0x00001100
+ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858 0x00001200
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT_WC 0x0000fc00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
@@ -2532,7 +2545,12 @@ struct shmem2_region {
uint32_t drv_func_info_addr; /* Offset 0x14C */
uint32_t drv_func_info_size; /* Offset 0x150 */
uint32_t link_attr_sync[PORT_MAX]; /* Offset 0x154 */
- #define LINK_ATTR_SYNC_KR2_ENABLE (1<<0)
+ #define LINK_ATTR_SYNC_KR2_ENABLE 0x00000001
+ #define LINK_ATTR_84858 0x00000002
+ #define LINK_SFP_EEPROM_COMP_CODE_MASK 0x0000ff00
+ #define LINK_SFP_EEPROM_COMP_CODE_SHIFT 8
+
+ uint32_t link_change_count[PORT_MAX]; /* Offset 0x160-0x164 */
};
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index 1f94476..9b3e00a 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -18,166 +18,159 @@
#include "ecore_hsi.h"
#include "ecore_reg.h"
-static elink_status_t elink_link_reset(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t reset_ext_phy);
-static elink_status_t elink_check_half_open_conn(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t notify);
-static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
- struct elink_params *params);
#define MDIO_REG_BANK_CL73_IEEEB0 0x0
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
+ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
+ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
+ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
+ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
#define MDIO_REG_BANK_CL73_IEEEB1 0x10
-#define MDIO_CL73_IEEEB1_AN_ADV1 0x00
-#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
-#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
-#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
-#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
-#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
-#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
-#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
-#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
-#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
-#define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
-#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
-#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
-#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
-#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
-#define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04
+ #define MDIO_CL73_IEEEB1_AN_ADV1 0x00
+ #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
+ #define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
+ #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
+ #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
+ #define MDIO_CL73_IEEEB1_AN_ADV2 0x01
+ #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
+ #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
+ #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
+ #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
+ #define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04
#define MDIO_REG_BANK_RX0 0x80b0
-#define MDIO_RX0_RX_STATUS 0x10
-#define MDIO_RX0_RX_STATUS_SIGDET 0x8000
-#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
-#define MDIO_RX0_RX_EQ_BOOST 0x1c
-#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
+ #define MDIO_RX0_RX_STATUS 0x10
+ #define MDIO_RX0_RX_STATUS_SIGDET 0x8000
+ #define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
+ #define MDIO_RX0_RX_EQ_BOOST 0x1c
+ #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+ #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX1 0x80c0
-#define MDIO_RX1_RX_EQ_BOOST 0x1c
-#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
+ #define MDIO_RX1_RX_EQ_BOOST 0x1c
+ #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+ #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX2 0x80d0
-#define MDIO_RX2_RX_EQ_BOOST 0x1c
-#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
+ #define MDIO_RX2_RX_EQ_BOOST 0x1c
+ #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+ #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX3 0x80e0
-#define MDIO_RX3_RX_EQ_BOOST 0x1c
-#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
+ #define MDIO_RX3_RX_EQ_BOOST 0x1c
+ #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+ #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX_ALL 0x80f0
-#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
-#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
+ #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
+ #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+ #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_TX0 0x8060
-#define MDIO_TX0_TX_DRIVER 0x17
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
-#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
-#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
-#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+ #define MDIO_TX0_TX_DRIVER 0x17
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+ #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX1 0x8070
-#define MDIO_TX1_TX_DRIVER 0x17
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
-#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
-#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
-#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+ #define MDIO_TX1_TX_DRIVER 0x17
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+ #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX2 0x8080
-#define MDIO_TX2_TX_DRIVER 0x17
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
-#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
-#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
-#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+ #define MDIO_TX2_TX_DRIVER 0x17
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+ #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX3 0x8090
-#define MDIO_TX3_TX_DRIVER 0x17
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
-#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
-#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
-#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
-#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
-#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
-#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+ #define MDIO_TX3_TX_DRIVER 0x17
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+ #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+ #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+ #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+ #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+ #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
-#define MDIO_BLOCK0_XGXS_CONTROL 0x10
+ #define MDIO_BLOCK0_XGXS_CONTROL 0x10
#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
-#define MDIO_BLOCK1_LANE_CTRL0 0x15
-#define MDIO_BLOCK1_LANE_CTRL1 0x16
-#define MDIO_BLOCK1_LANE_CTRL2 0x17
-#define MDIO_BLOCK1_LANE_PRBS 0x19
+ #define MDIO_BLOCK1_LANE_CTRL0 0x15
+ #define MDIO_BLOCK1_LANE_CTRL1 0x16
+ #define MDIO_BLOCK1_LANE_CTRL2 0x17
+ #define MDIO_BLOCK1_LANE_PRBS 0x19
#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
-#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
-#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
-#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
-#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
-#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
-#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
-#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
-#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
-#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
+ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
+ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
+ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
+ #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
+ #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
+ #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
+ #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
+ #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
+ #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
#define MDIO_REG_BANK_GP_STATUS 0x8120
#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00
+ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900
+
#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10
@@ -320,6 +313,7 @@ bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
Theotherbitsarereservedandshouldbezero*/
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+
#define MDIO_PMA_DEVAD 0x1
/*ieee*/
#define MDIO_PMA_REG_CTRL 0x0
@@ -328,7 +322,7 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_TX_DISABLE 0x0009
#define MDIO_PMA_REG_RX_SD 0xa
/*bnx2x*/
-#define MDIO_PMA_REG_BNX2X_CTRL 0x0096
+#define MDIO_PMA_REG_BCM_CTRL 0x0096
#define MDIO_PMA_REG_FEC_CTRL 0x00ab
#define MDIO_PMA_LASI_RXCTRL 0x9000
#define MDIO_PMA_LASI_TXCTRL 0x9001
@@ -343,8 +337,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
#define MDIO_PMA_REG_MISC_CTRL 0xca0a
#define MDIO_PMA_REG_GEN_CTRL 0xca10
-#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
-#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
+ #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
+ #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
#define MDIO_PMA_REG_ROM_VER1 0xca19
@@ -358,21 +352,21 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_MISC_CTRL1 0xca85
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
-#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
-#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
-#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
-#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
-#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
-#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
+ #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
-#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
+ #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
@@ -404,6 +398,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11
+
+
#define MDIO_WIS_DEVAD 0x2
/*bnx2x*/
#define MDIO_WIS_REG_LASI_CNTL 0x9002
@@ -415,13 +411,15 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
#define MDIO_PCS_REG_7101_SPI_MUX 0xD008
#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
-#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
+ #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
-#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
-#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
-#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
+ #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
+ #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
+ #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
+
+
#define MDIO_XS_DEVAD 0x4
#define MDIO_XS_REG_STATUS 0x0001
#define MDIO_XS_PLL_SEQUENCER 0x8000
@@ -439,12 +437,12 @@ Theotherbitsarereservedandshouldbezero*/
/*ieee*/
#define MDIO_AN_REG_CTRL 0x0000
#define MDIO_AN_REG_STATUS 0x0001
-#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
+ #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
#define MDIO_AN_REG_ADV_PAUSE 0x0010
-#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
-#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
-#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
-#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
+ #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
+ #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
+ #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
+ #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
#define MDIO_AN_REG_ADV 0x0011
#define MDIO_AN_REG_ADV2 0x0012
#define MDIO_AN_REG_LP_AUTO_NEG 0x0013
@@ -465,13 +463,16 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
-#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
+ #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
+#define MDIO_AN_REG_848xx_ID_MSB 0xffe2
+ #define BNX2X84858_PHY_ID 0x600d
+#define MDIO_AN_REG_848xx_ID_LSB 0xffe3
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0
-#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008
+ #define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8
@@ -480,62 +481,62 @@ Theotherbitsarereservedandshouldbezero*/
/* BNX2X84823 only */
#define MDIO_CTL_DEVAD 0x1e
#define MDIO_CTL_REG_84823_MEDIA 0x401a
-#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018
+ #define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018
/* These pins configure the BNX2X84823 interface to MAC after reset. */
-#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008
-#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010
+ #define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008
+ #define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010
/* These pins configure the BNX2X84823 interface to Line after reset. */
-#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060
-#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020
-#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040
+ #define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060
+ #define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020
+ #define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040
/* When this pin is active high during reset, 10GBASE-T core is power
* down, When it is active low the 10GBASE-T is power up
*/
-#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080
-#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100
-#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
-#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
-#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
+ #define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080
+ #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100
+ #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
+ #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
+ #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005
-#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
+ #define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b
-#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f
+ #define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f
#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec
-#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
+ #define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
/* BNX2X84833 only */
#define MDIO_84833_TOP_CFG_FW_REV 0x400f
-#define MDIO_84833_TOP_CFG_FW_EEE 0x10b1
-#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
+#define MDIO_84833_TOP_CFG_FW_EEE 0x10b1
+#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
-#define MDIO_84833_SUPER_ISOLATE 0x8000
-/* These are mailbox register set used by 84833. */
-#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005
-#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006
-#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
-#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
-#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
-#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037
-#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038
-#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039
-#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a
-#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b
-#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c
-#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0
-#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26
-#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27
-#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28
-#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29
-#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30
-#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31
-
-/* Mailbox command set used by 84833. */
-#define PHY84833_CMD_SET_PAIR_SWAP 0x8001
-#define PHY84833_CMD_GET_EEE_MODE 0x8008
-#define PHY84833_CMD_SET_EEE_MODE 0x8009
-#define PHY84833_CMD_GET_CURRENT_TEMP 0x8031
-/* Mailbox status set used by 84833. */
+#define MDIO_84833_SUPER_ISOLATE 0x8000
+/* These are mailbox register set used by 84833/84858. */
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c
+#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
+#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
+#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
+#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
+#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
+#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
+#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31)
+
+/* Mailbox command set used by 84833/84858 */
+#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001
+#define PHY848xx_CMD_GET_EEE_MODE 0x8008
+#define PHY848xx_CMD_SET_EEE_MODE 0x8009
+#define PHY848xx_CMD_GET_CURRENT_TEMP 0x8031
+/* Mailbox status set used by 84833 only */
#define PHY84833_STATUS_CMD_RECEIVED 0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
@@ -545,6 +546,19 @@ Theotherbitsarereservedandshouldbezero*/
#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
+/* Mailbox Process */
+#define PHY84833_MB_PROCESS1 1
+#define PHY84833_MB_PROCESS2 2
+#define PHY84833_MB_PROCESS3 3
+
+
+/* Mailbox status set used by 84858 only */
+#define PHY84858_STATUS_CMD_RECEIVED 0x0001
+#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002
+#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004
+#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008
+#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb
+
/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD 0x3
@@ -553,8 +567,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12
-#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
-#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
+ #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
+ #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
#define MDIO_WC_REG_PCS_STATUS2 0x0021
#define MDIO_WC_REG_PMD_KR_CONTROL 0x0096
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000
@@ -570,6 +584,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081
#define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091
#define MDIO_WC_REG_TX0_TX_DRIVER 0x8067
+#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET 0x01
+#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_MASK 0x000e
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08
@@ -585,7 +601,9 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca
#define MDIO_WC_REG_RX2_PCI_CTRL 0x80da
#define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea
+#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI 0x80fa
#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104
+#define MDIO_WC_REG_XGXSBLK2_LANE_RESET 0x810a
#define MDIO_WC_REG_XGXS_STATUS3 0x8129
#define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130
#define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131
@@ -599,35 +617,35 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2
#define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3
#define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4
-#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000
-#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100
-#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010
-#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1
+ #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000
+ #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100
+ #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010
+ #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1
#define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE
#define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8
-#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8
+ #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc
#define MDIO_WC_REG_UC_INFO_B1_CRC 0x81FE
#define MDIO_WC_REG_DSC1B0_UC_CTRL 0x820e
#define MDIO_WC_REG_DSC1B0_UC_CTRL_RDY4CMD (1<<7)
#define MDIO_WC_REG_DSC_SMC 0x8213
#define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0 0x821e
#define MDIO_WC_REG_TX_FIR_TAP 0x82e2
-#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00
-#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f
-#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04
-#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0
-#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a
-#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00
-#define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000
+ #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00
+ #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f
+ #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04
+ #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0
+ #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a
+ #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00
+ #define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000
#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3
#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6
@@ -689,8 +707,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT 0xffe1
#define MDIO_WC0_XGXS_BLK2_LANE_RESET 0x810A
-#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0
-#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4
+#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0
+#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4
#define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2 0x8141
@@ -700,33 +718,31 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_REG_GPHY_MII_STATUS 0x1
#define MDIO_REG_GPHY_PHYID_LSB 0x3
#define MDIO_REG_GPHY_CL45_ADDR_REG 0xd
-#define MDIO_REG_GPHY_CL45_REG_WRITE 0x4000
-#define MDIO_REG_GPHY_CL45_REG_READ 0xc000
+ #define MDIO_REG_GPHY_CL45_REG_WRITE 0x4000
+ #define MDIO_REG_GPHY_CL45_REG_READ 0xc000
#define MDIO_REG_GPHY_CL45_DATA_REG 0xe
-#define MDIO_REG_GPHY_EEE_RESOLVED 0x803e
+ #define MDIO_REG_GPHY_EEE_RESOLVED 0x803e
#define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15
#define MDIO_REG_GPHY_EXP_ACCESS 0x17
-#define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00
-#define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40
+ #define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00
+ #define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40
#define MDIO_REG_GPHY_AUX_STATUS 0x19
#define MDIO_REG_INTR_STATUS 0x1a
#define MDIO_REG_INTR_MASK 0x1b
-#define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1)
+ #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1)
#define MDIO_REG_GPHY_SHADOW 0x1c
-#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10)
-#define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10)
-#define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15)
-#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)
-#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8)
-
-typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy,
- struct elink_params *
- params,
- uint8_t dev_addr,
- uint16_t addr,
- uint8_t byte_cnt,
- uint8_t * o_buf,
- uint8_t);
+ #define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10)
+ #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10)
+ #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15)
+ #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)
+ #define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8)
+
+
+typedef elink_status_t (*read_sfp_module_eeprom_func_p)(struct elink_phy *phy,
+ struct elink_params *params,
+ uint8_t dev_addr, uint16_t addr,
+ uint8_t byte_cnt,
+ uint8_t *o_buf, uint8_t);
/********************************************************/
#define ELINK_ETH_HLEN 14
/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
@@ -850,21 +866,29 @@ typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy,
LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
#define ELINK_SFP_EEPROM_CON_TYPE_ADDR 0x2
-#define ELINK_SFP_EEPROM_CON_TYPE_VAL_LC 0x7
-#define ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
-#define ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22
+ #define ELINK_SFP_EEPROM_CON_TYPE_VAL_UNKNOWN 0x0
+ #define ELINK_SFP_EEPROM_CON_TYPE_VAL_LC 0x7
+ #define ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
+ #define ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22
+
-#define ELINK_SFP_EEPROM_COMP_CODE_ADDR 0x3
-#define ELINK_SFP_EEPROM_COMP_CODE_SR_MASK (1<<4)
-#define ELINK_SFP_EEPROM_COMP_CODE_LR_MASK (1<<5)
-#define ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6)
+#define ELINK_SFP_EEPROM_10G_COMP_CODE_ADDR 0x3
+ #define ELINK_SFP_EEPROM_10G_COMP_CODE_SR_MASK (1 << 4)
+ #define ELINK_SFP_EEPROM_10G_COMP_CODE_LR_MASK (1 << 5)
+ #define ELINK_SFP_EEPROM_10G_COMP_CODE_LRM_MASK (1 << 6)
+
+#define ELINK_SFP_EEPROM_1G_COMP_CODE_ADDR 0x6
+ #define ELINK_SFP_EEPROM_1G_COMP_CODE_SX (1 << 0)
+ #define ELINK_SFP_EEPROM_1G_COMP_CODE_LX (1 << 1)
+ #define ELINK_SFP_EEPROM_1G_COMP_CODE_CX (1 << 2)
+ #define ELINK_SFP_EEPROM_1G_COMP_CODE_BASE_T (1 << 3)
#define ELINK_SFP_EEPROM_FC_TX_TECH_ADDR 0x8
-#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
-#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8
+ #define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
+ #define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8
#define ELINK_SFP_EEPROM_OPTIONS_ADDR 0x40
-#define ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
+ #define ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
#define ELINK_SFP_EEPROM_OPTIONS_SIZE 2
#define ELINK_EDC_MODE_LINEAR 0x0022
@@ -883,6 +907,10 @@ typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy,
#define ELINK_MAX_PACKET_SIZE (9700)
#define MAX_KR_LINK_RETRY 4
+#define DEFAULT_TX_DRV_BRDCT 2
+#define DEFAULT_TX_DRV_IFIR 0
+#define DEFAULT_TX_DRV_POST2 3
+#define DEFAULT_TX_DRV_IPRE_DRIVER 6
/**********************************************************/
/* INTERFACE */
@@ -900,6 +928,11 @@ typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy,
(_bank + (_addr & 0xf)), \
_val)
+static elink_status_t elink_check_half_open_conn(struct elink_params *params,
+ struct elink_vars *vars, uint8_t notify);
+static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
+ struct elink_params *params);
+
static uint32_t elink_bits_en(struct bnx2x_softc *sc, uint32_t reg, uint32_t bits)
{
uint32_t val = REG_RD(sc, reg);
@@ -935,16 +968,16 @@ static int elink_check_lfa(struct elink_params *params)
struct bnx2x_softc *sc = params->sc;
additional_config =
- REG_RD(sc, params->lfa_base +
- offsetof(struct shmem_lfa, additional_config));
+ REG_RD(sc, params->lfa_base +
+ offsetof(struct shmem_lfa, additional_config));
/* NOTE: must be first condition checked -
- * to verify DCC bit is cleared in any case!
- */
+ * to verify DCC bit is cleared in any case!
+ */
if (additional_config & NO_LFA_DUE_TO_DCC_MASK) {
- PMD_DRV_LOG(DEBUG, sc, "No LFA due to DCC flap after clp exit");
+ ELINK_DEBUG_P0(sc, "No LFA due to DCC flap after clp exit");
REG_WR(sc, params->lfa_base +
- offsetof(struct shmem_lfa, additional_config),
+ offsetof(struct shmem_lfa, additional_config),
additional_config & ~NO_LFA_DUE_TO_DCC_MASK);
return LFA_DCC_LFA_DISABLED;
}
@@ -983,8 +1016,8 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_duplex));
req_val = params->req_duplex[0] | (params->req_duplex[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(INFO, sc, "Duplex mismatch %x vs. %x",
- (saved_val & lfa_mask), (req_val & lfa_mask));
+ ELINK_DEBUG_P2(sc, "Duplex mismatch %x vs. %x",
+ (saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_DUPLEX_MISMATCH;
}
/* Compare Flow Control */
@@ -992,8 +1025,8 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_flow_ctrl));
req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(DEBUG, sc, "Flow control mismatch %x vs. %x",
- (saved_val & lfa_mask), (req_val & lfa_mask));
+ ELINK_DEBUG_P2(sc, "Flow control mismatch %x vs. %x",
+ (saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_FLOW_CTRL_MISMATCH;
}
/* Compare Link Speed */
@@ -1001,8 +1034,8 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_line_speed));
req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(DEBUG, sc, "Link speed mismatch %x vs. %x",
- (saved_val & lfa_mask), (req_val & lfa_mask));
+ ELINK_DEBUG_P2(sc, "Link speed mismatch %x vs. %x",
+ (saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_LINK_SPEED_MISMATCH;
}
@@ -1012,21 +1045,21 @@ static int elink_check_lfa(struct elink_params *params)
speed_cap_mask[cfg_idx]));
if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) {
- PMD_DRV_LOG(DEBUG, sc, "Speed Cap mismatch %x vs. %x",
- cur_speed_cap_mask,
- params->speed_cap_mask[cfg_idx]);
+ ELINK_DEBUG_P2(sc, "Speed Cap mismatch %x vs. %x",
+ cur_speed_cap_mask,
+ params->speed_cap_mask[cfg_idx]);
return LFA_SPEED_CAP_MISMATCH;
}
}
cur_req_fc_auto_adv =
- REG_RD(sc, params->lfa_base +
- offsetof(struct shmem_lfa, additional_config)) &
- REQ_FC_AUTO_ADV_MASK;
+ REG_RD(sc, params->lfa_base +
+ offsetof(struct shmem_lfa, additional_config)) &
+ REQ_FC_AUTO_ADV_MASK;
- if ((uint16_t) cur_req_fc_auto_adv != params->req_fc_auto_adv) {
- PMD_DRV_LOG(DEBUG, sc, "Flow Ctrl AN mismatch %x vs. %x",
- cur_req_fc_auto_adv, params->req_fc_auto_adv);
+ if ((uint16_t)cur_req_fc_auto_adv != params->req_fc_auto_adv) {
+ ELINK_DEBUG_P2(sc, "Flow Ctrl AN mismatch %x vs. %x",
+ cur_req_fc_auto_adv, params->req_fc_auto_adv);
return LFA_FLOW_CTRL_MISMATCH;
}
@@ -1038,27 +1071,25 @@ static int elink_check_lfa(struct elink_params *params)
(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)) ||
((eee_status & SHMEM_EEE_REQUESTED_BIT) ^
(params->eee_mode & ELINK_EEE_MODE_ADV_LPI))) {
- PMD_DRV_LOG(DEBUG, sc,
- "EEE mismatch %x vs. %x", params->eee_mode,
- eee_status);
+ ELINK_DEBUG_P2(sc, "EEE mismatch %x vs. %x", params->eee_mode,
+ eee_status);
return LFA_EEE_MISMATCH;
}
/* LFA conditions are met */
return 0;
}
-
/******************************************************************/
/* EPIO/GPIO section */
/******************************************************************/
static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin,
- uint32_t * en)
+ uint32_t *en)
{
uint32_t epio_mask, gp_oenable;
*en = 0;
/* Sanity check */
if (epio_pin > 31) {
- PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to get", epio_pin);
+ ELINK_DEBUG_P1(sc, "Invalid EPIO pin %d to get", epio_pin);
return;
}
@@ -1069,17 +1100,16 @@ static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin,
*en = (REG_RD(sc, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin;
}
-
static void elink_set_epio(struct bnx2x_softc *sc, uint32_t epio_pin, uint32_t en)
{
uint32_t epio_mask, gp_output, gp_oenable;
/* Sanity check */
if (epio_pin > 31) {
- PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to set", epio_pin);
+ ELINK_DEBUG_P1(sc, "Invalid EPIO pin %d to set", epio_pin);
return;
}
- PMD_DRV_LOG(DEBUG, sc, "Setting EPIO pin %d to %d", epio_pin, en);
+ ELINK_DEBUG_P2(sc, "Setting EPIO pin %d to %d", epio_pin, en);
epio_mask = 1 << epio_pin;
/* Set this EPIO to output */
gp_output = REG_RD(sc, MCP_REG_MCPR_GP_OUTPUTS);
@@ -1105,12 +1135,12 @@ static void elink_set_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg,
} else {
uint8_t gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3;
uint8_t gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2;
- elink_cb_gpio_write(sc, gpio_num, (uint8_t) val, gpio_port);
+ elink_cb_gpio_write(sc, gpio_num, (uint8_t)val, gpio_port);
}
}
static uint32_t elink_get_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg,
- uint32_t * val)
+ uint32_t *val)
{
if (pin_cfg == PIN_CFG_NA)
return ELINK_STATUS_ERROR;
@@ -1122,14 +1152,939 @@ static uint32_t elink_get_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg,
*val = elink_cb_gpio_read(sc, gpio_num, gpio_port);
}
return ELINK_STATUS_OK;
+}
+
+/******************************************************************/
+/* ETS section */
+/******************************************************************/
+static void elink_ets_e2e3a0_disabled(struct elink_params *params)
+{
+ /* ETS disabled configuration*/
+ struct bnx2x_softc *sc = params->sc;
+
+ ELINK_DEBUG_P0(sc, "ETS E2E3 disabled configuration");
+
+ /* mapping between entry priority to client number (0,1,2 -debug and
+ * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
+ * 3bits client num.
+ * PRI4 | PRI3 | PRI2 | PRI1 | PRI0
+ * cos1-100 cos0-011 dbg1-010 dbg0-001 MCP-000
+ */
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, 0x4688);
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ * as strict. Bits 0,1,2 - debug and management entries, 3 -
+ * COS0 entry, 4 - COS1 entry.
+ * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT
+ * bit4 bit3 bit2 bit1 bit0
+ * MCP and debug are strict
+ */
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7);
+ /* defines which entries (clients) are subjected to WFQ arbitration */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0);
+ /* For strict priority entries defines the number of consecutive
+ * slots for the highest priority.
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
+ /* mapping between the CREDIT_WEIGHT registers and actual client
+ * numbers
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0);
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, 0);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, 0);
+ REG_WR(sc, PBF_REG_HIGH_PRIORITY_COS_NUM, 0);
+ /* ETS mode disable */
+ REG_WR(sc, PBF_REG_ETS_ENABLED, 0);
+ /* If ETS mode is enabled (there is no strict priority) defines a WFQ
+ * weight for COS0/COS1.
+ */
+ REG_WR(sc, PBF_REG_COS0_WEIGHT, 0x2710);
+ REG_WR(sc, PBF_REG_COS1_WEIGHT, 0x2710);
+ /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter */
+ REG_WR(sc, PBF_REG_COS0_UPPER_BOUND, 0x989680);
+ REG_WR(sc, PBF_REG_COS1_UPPER_BOUND, 0x989680);
+ /* Defines the number of consecutive slots for the strict priority */
+ REG_WR(sc, PBF_REG_NUM_STRICT_ARB_SLOTS, 0);
+}
+/******************************************************************************
+ * Description:
+ * Getting min_w_val will be set according to line speed .
+ *.
+ ******************************************************************************/
+static uint32_t elink_ets_get_min_w_val_nig(const struct elink_vars *vars)
+{
+ uint32_t min_w_val = 0;
+ /* Calculate min_w_val.*/
+ if (vars->link_up) {
+ if (vars->line_speed == ELINK_SPEED_20000)
+ min_w_val = ELINK_ETS_E3B0_NIG_MIN_W_VAL_20GBPS;
+ else
+ min_w_val = ELINK_ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS;
+ } else {
+ min_w_val = ELINK_ETS_E3B0_NIG_MIN_W_VAL_20GBPS;
+ }
+ /* If the link isn't up (static configuration for example ) The
+ * link will be according to 20GBPS.
+ */
+ return min_w_val;
+}
+/******************************************************************************
+ * Description:
+ * Getting credit upper bound form min_w_val.
+ *.
+ ******************************************************************************/
+static uint32_t elink_ets_get_credit_upper_bound(const uint32_t min_w_val)
+{
+ const uint32_t credit_upper_bound = (uint32_t)
+ ELINK_MAXVAL((150 * min_w_val),
+ ELINK_MAX_PACKET_SIZE);
+ return credit_upper_bound;
+}
+/******************************************************************************
+ * Description:
+ * Set credit upper bound for NIG.
+ *.
+ ******************************************************************************/
+static void elink_ets_e3b0_set_credit_upper_bound_nig(
+ const struct elink_params *params,
+ const uint32_t min_w_val)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint8_t port = params->port;
+ const uint32_t credit_upper_bound =
+ elink_ets_get_credit_upper_bound(min_w_val);
+
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, credit_upper_bound);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, credit_upper_bound);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2, credit_upper_bound);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3, credit_upper_bound);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4, credit_upper_bound);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 :
+ NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5, credit_upper_bound);
+
+ if (!port) {
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6,
+ credit_upper_bound);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7,
+ credit_upper_bound);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8,
+ credit_upper_bound);
+ }
+}
+/******************************************************************************
+ * Description:
+ * Will return the NIG ETS registers to init values.Except
+ * credit_upper_bound.
+ * That isn't used in this configuration (No WFQ is enabled) and will be
+ * configured according to spec
+ *.
+ ******************************************************************************/
+static void elink_ets_e3b0_nig_disabled(const struct elink_params *params,
+ const struct elink_vars *vars)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint8_t port = params->port;
+ const uint32_t min_w_val = elink_ets_get_min_w_val_nig(vars);
+ /* Mapping between entry priority to client number (0,1,2 -debug and
+ * management clients, 3 - COS0 client, 4 - COS1, ... 8 -
+ * COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by
+ * reset value or init tool
+ */
+ if (port) {
+ REG_WR(sc, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, 0x543210);
+ REG_WR(sc, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB, 0x0);
+ } else {
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8);
+ }
+ /* For strict priority entries defines the number of consecutive
+ * slots for the highest priority.
+ */
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS :
+ NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
+ /* Mapping between the CREDIT_WEIGHT registers and actual client
+ * numbers
+ */
+ if (port) {
+ /*Port 1 has 6 COS*/
+ REG_WR(sc, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543);
+ REG_WR(sc, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x0);
+ } else {
+ /*Port 0 has 9 COS*/
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB,
+ 0x43210876);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5);
+ }
+
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ * as strict. Bits 0,1,2 - debug and management entries, 3 -
+ * COS0 entry, 4 - COS1 entry.
+ * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT
+ * bit4 bit3 bit2 bit1 bit0
+ * MCP and debug are strict
+ */
+ if (port)
+ REG_WR(sc, NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT, 0x3f);
+ else
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1ff);
+ /* defines which entries (clients) are subjected to WFQ arbitration */
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ :
+ NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0);
+
+ /* Please notice the register address are note continuous and a
+ * for here is note appropriate.In 2 port mode port0 only COS0-5
+ * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4
+ * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT
+ * are never used for WFQ
+ */
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0x0);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2, 0x0);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3, 0x0);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4, 0x0);
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5, 0x0);
+ if (!port) {
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6, 0x0);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7, 0x0);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8, 0x0);
+ }
+
+ elink_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val);
+}
+/******************************************************************************
+ * Description:
+ * Set credit upper bound for PBF.
+ *.
+ ******************************************************************************/
+static void elink_ets_e3b0_set_credit_upper_bound_pbf(
+ const struct elink_params *params,
+ const uint32_t min_w_val)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint32_t credit_upper_bound =
+ elink_ets_get_credit_upper_bound(min_w_val);
+ const uint8_t port = params->port;
+ uint32_t base_upper_bound = 0;
+ uint8_t max_cos = 0;
+ uint8_t i = 0;
+ /* In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4
+ * port mode port1 has COS0-2 that can be used for WFQ.
+ */
+ if (!port) {
+ base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0;
+ max_cos = ELINK_DCBX_E3B0_MAX_NUM_COS_PORT0;
+ } else {
+ base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P1;
+ max_cos = ELINK_DCBX_E3B0_MAX_NUM_COS_PORT1;
+ }
+
+ for (i = 0; i < max_cos; i++)
+ REG_WR(sc, base_upper_bound + (i << 2), credit_upper_bound);
+}
+
+/******************************************************************************
+ * Description:
+ * Will return the PBF ETS registers to init values.Except
+ * credit_upper_bound.
+ * That isn't used in this configuration (No WFQ is enabled) and will be
+ * configured according to spec
+ *.
+ ******************************************************************************/
+static void elink_ets_e3b0_pbf_disabled(const struct elink_params *params)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint8_t port = params->port;
+ const uint32_t min_w_val_pbf = ELINK_ETS_E3B0_PBF_MIN_W_VAL;
+ uint8_t i = 0;
+ uint32_t base_weight = 0;
+ uint8_t max_cos = 0;
+
+ /* Mapping between entry priority to client number 0 - COS0
+ * client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num.
+ * TODO_ETS - Should be done by reset value or init tool
+ */
+ if (port)
+ /* 0x688 (|011|0 10|00 1|000) */
+ REG_WR(sc, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1, 0x688);
+ else
+ /* (10 1|100 |011|0 10|00 1|000) */
+ REG_WR(sc, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0, 0x2C688);
+
+ /* TODO_ETS - Should be done by reset value or init tool */
+ if (port)
+ /* 0x688 (|011|0 10|00 1|000)*/
+ REG_WR(sc, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1, 0x688);
+ else
+ /* 0x2C688 (10 1|100 |011|0 10|00 1|000) */
+ REG_WR(sc, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0, 0x2C688);
+
+ REG_WR(sc, (port) ? PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 :
+ PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0, 0x100);
+
+
+ REG_WR(sc, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 :
+ PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0, 0);
+
+ REG_WR(sc, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 :
+ PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0, 0);
+ /* In 2 port mode port0 has COS0-5 that can be used for WFQ.
+ * In 4 port mode port1 has COS0-2 that can be used for WFQ.
+ */
+ if (!port) {
+ base_weight = PBF_REG_COS0_WEIGHT_P0;
+ max_cos = ELINK_DCBX_E3B0_MAX_NUM_COS_PORT0;
+ } else {
+ base_weight = PBF_REG_COS0_WEIGHT_P1;
+ max_cos = ELINK_DCBX_E3B0_MAX_NUM_COS_PORT1;
+ }
+
+ for (i = 0; i < max_cos; i++)
+ REG_WR(sc, base_weight + (0x4 * i), 0);
+
+ elink_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf);
+}
+/******************************************************************************
+ * Description:
+ * E3B0 disable will return basicly the values to init values.
+ *.
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_disabled(const struct elink_params *params,
+ const struct elink_vars *vars)
+{
+ struct bnx2x_softc *sc = params->sc;
+
+ if (!CHIP_IS_E3B0(sc)) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_disabled the chip isn't E3B0");
+ return ELINK_STATUS_ERROR;
+ }
+
+ elink_ets_e3b0_nig_disabled(params, vars);
+
+ elink_ets_e3b0_pbf_disabled(params);
+
+ return ELINK_STATUS_OK;
+}
+
+/******************************************************************************
+ * Description:
+ * Disable will return basicly the values to init values.
+ *
+ ******************************************************************************/
+elink_status_t elink_ets_disabled(struct elink_params *params,
+ struct elink_vars *vars)
+{
+ struct bnx2x_softc *sc = params->sc;
+ elink_status_t elink_status = ELINK_STATUS_OK;
+
+ if ((CHIP_IS_E2(sc)) || (CHIP_IS_E3A0(sc))) {
+ elink_ets_e2e3a0_disabled(params);
+ } else if (CHIP_IS_E3B0(sc)) {
+ elink_status = elink_ets_e3b0_disabled(params, vars);
+ } else {
+ ELINK_DEBUG_P0(sc, "elink_ets_disabled - chip not supported");
+ return ELINK_STATUS_ERROR;
+ }
+
+ return elink_status;
+}
+
+/******************************************************************************
+ * Description
+ * Set the COS mappimg to SP and BW until this point all the COS are not
+ * set as SP or BW.
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_cli_map(const struct elink_params *params,
+ __rte_unused const struct elink_ets_params *ets_params,
+ const uint8_t cos_sp_bitmap,
+ const uint8_t cos_bw_bitmap)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint8_t port = params->port;
+ const uint8_t nig_cli_sp_bitmap = 0x7 | (cos_sp_bitmap << 3);
+ const uint8_t pbf_cli_sp_bitmap = cos_sp_bitmap;
+ const uint8_t nig_cli_subject2wfq_bitmap = cos_bw_bitmap << 3;
+ const uint8_t pbf_cli_subject2wfq_bitmap = cos_bw_bitmap;
+
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT :
+ NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, nig_cli_sp_bitmap);
+
+ REG_WR(sc, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 :
+ PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0, pbf_cli_sp_bitmap);
+
+ REG_WR(sc, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ :
+ NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ,
+ nig_cli_subject2wfq_bitmap);
+
+ REG_WR(sc, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 :
+ PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0,
+ pbf_cli_subject2wfq_bitmap);
+
+ return ELINK_STATUS_OK;
+}
+
+/******************************************************************************
+ * Description:
+ * This function is needed because NIG ARB_CREDIT_WEIGHT_X are
+ * not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable.
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_set_cos_bw(struct bnx2x_softc *sc,
+ const uint8_t cos_entry,
+ const uint32_t min_w_val_nig,
+ const uint32_t min_w_val_pbf,
+ const uint16_t total_bw,
+ const uint8_t bw,
+ const uint8_t port)
+{
+ uint32_t nig_reg_address_crd_weight = 0;
+ uint32_t pbf_reg_address_crd_weight = 0;
+ /* Calculate and set BW for this COS - use 1 instead of 0 for BW */
+ const uint32_t cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw;
+ const uint32_t cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw;
+
+ switch (cos_entry) {
+ case 0:
+ nig_reg_address_crd_weight =
+ (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0;
+ pbf_reg_address_crd_weight = (port) ?
+ PBF_REG_COS0_WEIGHT_P1 : PBF_REG_COS0_WEIGHT_P0;
+ break;
+ case 1:
+ nig_reg_address_crd_weight = (port) ?
+ NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1;
+ pbf_reg_address_crd_weight = (port) ?
+ PBF_REG_COS1_WEIGHT_P1 : PBF_REG_COS1_WEIGHT_P0;
+ break;
+ case 2:
+ nig_reg_address_crd_weight = (port) ?
+ NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 :
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2;
+
+ pbf_reg_address_crd_weight = (port) ?
+ PBF_REG_COS2_WEIGHT_P1 : PBF_REG_COS2_WEIGHT_P0;
+ break;
+ case 3:
+ if (port)
+ return ELINK_STATUS_ERROR;
+ nig_reg_address_crd_weight =
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3;
+ pbf_reg_address_crd_weight =
+ PBF_REG_COS3_WEIGHT_P0;
+ break;
+ case 4:
+ if (port)
+ return ELINK_STATUS_ERROR;
+ nig_reg_address_crd_weight =
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4;
+ pbf_reg_address_crd_weight = PBF_REG_COS4_WEIGHT_P0;
+ break;
+ case 5:
+ if (port)
+ return ELINK_STATUS_ERROR;
+ nig_reg_address_crd_weight =
+ NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5;
+ pbf_reg_address_crd_weight = PBF_REG_COS5_WEIGHT_P0;
+ break;
+ }
+
+ REG_WR(sc, nig_reg_address_crd_weight, cos_bw_nig);
+
+ REG_WR(sc, pbf_reg_address_crd_weight, cos_bw_pbf);
+
+ return ELINK_STATUS_OK;
+}
+/******************************************************************************
+ * Description:
+ * Calculate the total BW.A value of 0 isn't legal.
+ *
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_get_total_bw(
+ const struct elink_params *params,
+ struct elink_ets_params *ets_params,
+ uint16_t *total_bw)
+{
+ struct bnx2x_softc *sc = params->sc;
+ uint8_t cos_idx = 0;
+ uint8_t is_bw_cos_exist = 0;
+
+ *total_bw = 0;
+ /* Calculate total BW requested */
+ for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) {
+ if (ets_params->cos[cos_idx].state == elink_cos_state_bw) {
+ is_bw_cos_exist = 1;
+ if (!ets_params->cos[cos_idx].params.bw_params.bw) {
+ ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config BW"
+ " was set to 0");
+ /* This is to prevent a state when ramrods
+ * can't be sent
+ */
+ ets_params->cos[cos_idx].params.bw_params.bw
+ = 1;
+ }
+ *total_bw +=
+ ets_params->cos[cos_idx].params.bw_params.bw;
+ }
+ }
+
+ /* Check total BW is valid */
+ if ((is_bw_cos_exist == 1) && (*total_bw != 100)) {
+ if (*total_bw == 0) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_E3B0_config total BW shouldn't be 0");
+ return ELINK_STATUS_ERROR;
+ }
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_E3B0_config total BW should be 100");
+ /* We can handle a case whre the BW isn't 100 this can happen
+ * if the TC are joined.
+ */
+ }
+ return ELINK_STATUS_OK;
+}
+
+/******************************************************************************
+ * Description:
+ * Invalidate all the sp_pri_to_cos.
+ *
+ ******************************************************************************/
+static void elink_ets_e3b0_sp_pri_to_cos_init(uint8_t *sp_pri_to_cos)
+{
+ uint8_t pri = 0;
+ for (pri = 0; pri < ELINK_DCBX_MAX_NUM_COS; pri++)
+ sp_pri_to_cos[pri] = DCBX_INVALID_COS;
+}
+/******************************************************************************
+ * Description:
+ * Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers
+ * according to sp_pri_to_cos.
+ *
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_sp_pri_to_cos_set(
+ const struct elink_params *params,
+ uint8_t *sp_pri_to_cos,
+ const uint8_t pri,
+ const uint8_t cos_entry)
+{
+ struct bnx2x_softc *sc = params->sc;
+ const uint8_t port = params->port;
+ const uint8_t max_num_of_cos = (port) ?
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT1 :
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT0;
+
+ if (pri >= max_num_of_cos) {
+ ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_pri_to_cos_set invalid "
+ "parameter Illegal strict priority");
+ return ELINK_STATUS_ERROR;
+ }
+
+ if (sp_pri_to_cos[pri] != DCBX_INVALID_COS) {
+ ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_pri_to_cos_set invalid "
+ "parameter There can't be two COS's with "
+ "the same strict pri");
+ return ELINK_STATUS_ERROR;
+ }
+
+ sp_pri_to_cos[pri] = cos_entry;
+ return ELINK_STATUS_OK;
+}
+
+/******************************************************************************
+ * Description:
+ * Returns the correct value according to COS and priority in
+ * the sp_pri_cli register.
+ *
+ ******************************************************************************/
+static uint64_t elink_e3b0_sp_get_pri_cli_reg(const uint8_t cos,
+ const uint8_t cos_offset,
+ const uint8_t pri_set,
+ const uint8_t pri_offset,
+ const uint8_t entry_size)
+{
+ uint64_t pri_cli_nig = 0;
+ pri_cli_nig = ((uint64_t)(cos + cos_offset)) << (entry_size *
+ (pri_set + pri_offset));
+
+ return pri_cli_nig;
+}
+/******************************************************************************
+ * Description:
+ * Returns the correct value according to COS and priority in the
+ * sp_pri_cli register for NIG.
+ *
+ ******************************************************************************/
+static uint64_t elink_e3b0_sp_get_pri_cli_reg_nig(const uint8_t cos,
+ const uint8_t pri_set)
+{
+ /* MCP Dbg0 and dbg1 are always with higher strict pri*/
+ const uint8_t nig_cos_offset = 3;
+ const uint8_t nig_pri_offset = 3;
+
+ return elink_e3b0_sp_get_pri_cli_reg(cos, nig_cos_offset, pri_set,
+ nig_pri_offset, 4);
+}
+/******************************************************************************
+ * Description:
+ * Returns the correct value according to COS and priority in the
+ * sp_pri_cli register for PBF.
+ *
+ ******************************************************************************/
+static uint64_t elink_e3b0_sp_get_pri_cli_reg_pbf(const uint8_t cos,
+ const uint8_t pri_set)
+{
+ const uint8_t pbf_cos_offset = 0;
+ const uint8_t pbf_pri_offset = 0;
+
+ return elink_e3b0_sp_get_pri_cli_reg(cos, pbf_cos_offset, pri_set,
+ pbf_pri_offset, 3);
+}
+
+/******************************************************************************
+ * Description:
+ * Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers
+ * according to sp_pri_to_cos.(which COS has higher priority)
+ *
+ ******************************************************************************/
+static elink_status_t elink_ets_e3b0_sp_set_pri_cli_reg(
+ const struct elink_params *params,
+ uint8_t *sp_pri_to_cos)
+{
+ struct bnx2x_softc *sc = params->sc;
+ uint8_t i = 0;
+ const uint8_t port = params->port;
+ /* MCP Dbg0 and dbg1 are always with higher strict pri*/
+ uint64_t pri_cli_nig = 0x210;
+ uint32_t pri_cli_pbf = 0x0;
+ uint8_t pri_set = 0;
+ uint8_t pri_bitmask = 0;
+ const uint8_t max_num_of_cos = (port) ?
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT1 :
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT0;
+
+ uint8_t cos_bit_to_set = (1 << max_num_of_cos) - 1;
+
+ /* Set all the strict priority first */
+ for (i = 0; i < max_num_of_cos; i++) {
+ if (sp_pri_to_cos[i] != DCBX_INVALID_COS) {
+ if (sp_pri_to_cos[i] >= ELINK_DCBX_MAX_NUM_COS) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_sp_set_pri_cli_reg "
+ "invalid cos entry");
+ return ELINK_STATUS_ERROR;
+ }
+
+ pri_cli_nig |= elink_e3b0_sp_get_pri_cli_reg_nig(
+ sp_pri_to_cos[i], pri_set);
+
+ pri_cli_pbf |= elink_e3b0_sp_get_pri_cli_reg_pbf(
+ sp_pri_to_cos[i], pri_set);
+ pri_bitmask = 1 << sp_pri_to_cos[i];
+ /* COS is used remove it from bitmap.*/
+ if (!(pri_bitmask & cos_bit_to_set)) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_sp_set_pri_cli_reg "
+ "invalid There can't be two COS's with"
+ " the same strict pri");
+ return ELINK_STATUS_ERROR;
+ }
+ cos_bit_to_set &= ~pri_bitmask;
+ pri_set++;
+ }
+ }
+
+ /* Set all the Non strict priority i= COS*/
+ for (i = 0; i < max_num_of_cos; i++) {
+ pri_bitmask = 1 << i;
+ /* Check if COS was already used for SP */
+ if (pri_bitmask & cos_bit_to_set) {
+ /* COS wasn't used for SP */
+ pri_cli_nig |= elink_e3b0_sp_get_pri_cli_reg_nig(
+ i, pri_set);
+
+ pri_cli_pbf |= elink_e3b0_sp_get_pri_cli_reg_pbf(
+ i, pri_set);
+ /* COS is used remove it from bitmap.*/
+ cos_bit_to_set &= ~pri_bitmask;
+ pri_set++;
+ }
+ }
+
+ if (pri_set != max_num_of_cos) {
+ ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_set_pri_cli_reg not all "
+ "entries were set");
+ return ELINK_STATUS_ERROR;
+ }
+
+ if (port) {
+ /* Only 6 usable clients*/
+ REG_WR(sc, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB,
+ (uint32_t)pri_cli_nig);
+
+ REG_WR(sc, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1, pri_cli_pbf);
+ } else {
+ /* Only 9 usable clients*/
+ const uint32_t pri_cli_nig_lsb = (uint32_t)(pri_cli_nig);
+ const uint32_t pri_cli_nig_msb = (uint32_t)
+ ((pri_cli_nig >> 32) & 0xF);
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB,
+ pri_cli_nig_lsb);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB,
+ pri_cli_nig_msb);
+
+ REG_WR(sc, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0, pri_cli_pbf);
+ }
+ return ELINK_STATUS_OK;
+}
+
+/******************************************************************************
+ * Description:
+ * Configure the COS to ETS according to BW and SP settings.
+ ******************************************************************************/
+elink_status_t elink_ets_e3b0_config(const struct elink_params *params,
+ const struct elink_vars *vars,
+ struct elink_ets_params *ets_params)
+{
+ struct bnx2x_softc *sc = params->sc;
+ elink_status_t elink_status = ELINK_STATUS_OK;
+ const uint8_t port = params->port;
+ uint16_t total_bw = 0;
+ const uint32_t min_w_val_nig = elink_ets_get_min_w_val_nig(vars);
+ const uint32_t min_w_val_pbf = ELINK_ETS_E3B0_PBF_MIN_W_VAL;
+ uint8_t cos_bw_bitmap = 0;
+ uint8_t cos_sp_bitmap = 0;
+ uint8_t sp_pri_to_cos[ELINK_DCBX_MAX_NUM_COS] = {0};
+ const uint8_t max_num_of_cos = (port) ?
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT1 :
+ ELINK_DCBX_E3B0_MAX_NUM_COS_PORT0;
+ uint8_t cos_entry = 0;
+
+ if (!CHIP_IS_E3B0(sc)) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_disabled the chip isn't E3B0");
+ return ELINK_STATUS_ERROR;
+ }
+
+ if (ets_params->num_of_cos > max_num_of_cos) {
+ ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config the number of COS "
+ "isn't supported");
+ return ELINK_STATUS_ERROR;
+ }
+
+ /* Prepare sp strict priority parameters*/
+ elink_ets_e3b0_sp_pri_to_cos_init(sp_pri_to_cos);
+
+ /* Prepare BW parameters*/
+ elink_status = elink_ets_e3b0_get_total_bw(params, ets_params,
+ &total_bw);
+ if (elink_status != ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_E3B0_config get_total_bw failed");
+ return ELINK_STATUS_ERROR;
+ }
+
+ /* Upper bound is set according to current link speed (min_w_val
+ * should be the same for upper bound and COS credit val).
+ */
+ elink_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig);
+ elink_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf);
+
+
+ for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) {
+ if (elink_cos_state_bw == ets_params->cos[cos_entry].state) {
+ cos_bw_bitmap |= (1 << cos_entry);
+ /* The function also sets the BW in HW(not the mappin
+ * yet)
+ */
+ elink_status = elink_ets_e3b0_set_cos_bw(
+ sc, cos_entry, min_w_val_nig, min_w_val_pbf,
+ total_bw,
+ ets_params->cos[cos_entry].params.bw_params.bw,
+ port);
+ } else if (elink_cos_state_strict ==
+ ets_params->cos[cos_entry].state){
+ cos_sp_bitmap |= (1 << cos_entry);
+
+ elink_status = elink_ets_e3b0_sp_pri_to_cos_set(
+ params,
+ sp_pri_to_cos,
+ ets_params->cos[cos_entry].params.sp_params.pri,
+ cos_entry);
+
+ } else {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_config cos state not valid");
+ return ELINK_STATUS_ERROR;
+ }
+ if (elink_status != ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_e3b0_config set cos bw failed");
+ return elink_status;
+ }
+ }
+
+ /* Set SP register (which COS has higher priority) */
+ elink_status = elink_ets_e3b0_sp_set_pri_cli_reg(params,
+ sp_pri_to_cos);
+
+ if (elink_status != ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc,
+ "elink_ets_E3B0_config set_pri_cli_reg failed");
+ return elink_status;
+ }
+
+ /* Set client mapping of BW and strict */
+ elink_status = elink_ets_e3b0_cli_map(params, ets_params,
+ cos_sp_bitmap,
+ cos_bw_bitmap);
+
+ if (elink_status != ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config SP failed");
+ return elink_status;
+ }
+ return ELINK_STATUS_OK;
+}
+static void elink_ets_bw_limit_common(const struct elink_params *params)
+{
+ /* ETS disabled configuration */
+ struct bnx2x_softc *sc = params->sc;
+ ELINK_DEBUG_P0(sc, "ETS enabled BW limit configuration");
+ /* Defines which entries (clients) are subjected to WFQ arbitration
+ * COS0 0x8
+ * COS1 0x10
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0x18);
+ /* Mapping between the ARB_CREDIT_WEIGHT registers and actual
+ * client numbers (WEIGHT_0 does not actually have to represent
+ * client 0)
+ * PRI4 | PRI3 | PRI2 | PRI1 | PRI0
+ * cos1-001 cos0-000 dbg1-100 dbg0-011 MCP-010
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0x111A);
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0,
+ ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1,
+ ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+
+ /* ETS mode enabled*/
+ REG_WR(sc, PBF_REG_ETS_ENABLED, 1);
+
+ /* Defines the number of consecutive slots for the strict priority */
+ REG_WR(sc, PBF_REG_NUM_STRICT_ARB_SLOTS, 0);
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ * as strict. Bits 0,1,2 - debug and management entries, 3 - COS0
+ * entry, 4 - COS1 entry.
+ * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
+ * bit4 bit3 bit2 bit1 bit0
+ * MCP and debug are strict
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7);
+
+ /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter.*/
+ REG_WR(sc, PBF_REG_COS0_UPPER_BOUND,
+ ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+ REG_WR(sc, PBF_REG_COS1_UPPER_BOUND,
+ ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+}
+
+void elink_ets_bw_limit(const struct elink_params *params,
+ const uint32_t cos0_bw,
+ const uint32_t cos1_bw)
+{
+ /* ETS disabled configuration*/
+ struct bnx2x_softc *sc = params->sc;
+ const uint32_t total_bw = cos0_bw + cos1_bw;
+ uint32_t cos0_credit_weight = 0;
+ uint32_t cos1_credit_weight = 0;
+
+ ELINK_DEBUG_P0(sc, "ETS enabled BW limit configuration");
+
+ if ((!total_bw) ||
+ (!cos0_bw) ||
+ (!cos1_bw)) {
+ ELINK_DEBUG_P0(sc, "Total BW can't be zero");
+ return;
+ }
+
+ cos0_credit_weight = (cos0_bw * ELINK_ETS_BW_LIMIT_CREDIT_WEIGHT) /
+ total_bw;
+ cos1_credit_weight = (cos1_bw * ELINK_ETS_BW_LIMIT_CREDIT_WEIGHT) /
+ total_bw;
+
+ elink_ets_bw_limit_common(params);
+
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, cos0_credit_weight);
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, cos1_credit_weight);
+
+ REG_WR(sc, PBF_REG_COS0_WEIGHT, cos0_credit_weight);
+ REG_WR(sc, PBF_REG_COS1_WEIGHT, cos1_credit_weight);
+}
+
+elink_status_t elink_ets_strict(const struct elink_params *params,
+ const uint8_t strict_cos)
+{
+ /* ETS disabled configuration*/
+ struct bnx2x_softc *sc = params->sc;
+ uint32_t val = 0;
+
+ ELINK_DEBUG_P0(sc, "ETS enabled strict configuration");
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ * as strict. Bits 0,1,2 - debug and management entries,
+ * 3 - COS0 entry, 4 - COS1 entry.
+ * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
+ * bit4 bit3 bit2 bit1 bit0
+ * MCP and debug are strict
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1F);
+ /* For strict priority entries defines the number of consecutive slots
+ * for the highest priority.
+ */
+ REG_WR(sc, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
+ /* ETS mode disable */
+ REG_WR(sc, PBF_REG_ETS_ENABLED, 0);
+ /* Defines the number of consecutive slots for the strict priority */
+ REG_WR(sc, PBF_REG_NUM_STRICT_ARB_SLOTS, 0x100);
+
+ /* Defines the number of consecutive slots for the strict priority */
+ REG_WR(sc, PBF_REG_HIGH_PRIORITY_COS_NUM, strict_cos);
+
+ /* Mapping between entry priority to client number (0,1,2 -debug and
+ * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
+ * 3bits client num.
+ * PRI4 | PRI3 | PRI2 | PRI1 | PRI0
+ * dbg0-010 dbg1-001 cos1-100 cos0-011 MCP-000
+ * dbg0-010 dbg1-001 cos0-011 cos1-100 MCP-000
+ */
+ val = (!strict_cos) ? 0x2318 : 0x22E0;
+ REG_WR(sc, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, val);
+
+ return ELINK_STATUS_OK;
}
/******************************************************************/
/* PFC section */
/******************************************************************/
static void elink_update_pfc_xmac(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars,
+ __rte_unused uint8_t is_lb)
{
struct bnx2x_softc *sc = params->sc;
uint32_t xmac_base;
@@ -1144,7 +2099,8 @@ static void elink_update_pfc_xmac(struct elink_params *params,
pfc1_val = 0x2;
/* No PFC support */
- if (!(params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
+ if (!(params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
/* RX flow control - Process pause frame in receive direction
*/
@@ -1154,12 +2110,12 @@ static void elink_update_pfc_xmac(struct elink_params *params,
/* TX flow control - Send pause packet when buffer is full */
if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN;
- } else { /* PFC support */
+ } else {/* PFC support */
pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN |
- XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN |
- XMAC_PFC_CTRL_HI_REG_RX_PFC_EN |
- XMAC_PFC_CTRL_HI_REG_TX_PFC_EN |
- XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON;
+ XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN |
+ XMAC_PFC_CTRL_HI_REG_RX_PFC_EN |
+ XMAC_PFC_CTRL_HI_REG_TX_PFC_EN |
+ XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON;
/* Write pause and PFC registers */
REG_WR(sc, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val);
REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val);
@@ -1173,21 +2129,76 @@ static void elink_update_pfc_xmac(struct elink_params *params,
REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val);
REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val);
+
/* Set MAC address for source TX Pause/PFC frames */
REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_LO,
((params->mac_addr[2] << 24) |
(params->mac_addr[3] << 16) |
- (params->mac_addr[4] << 8) | (params->mac_addr[5])));
+ (params->mac_addr[4] << 8) |
+ (params->mac_addr[5])));
REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_HI,
- ((params->mac_addr[0] << 8) | (params->mac_addr[1])));
+ ((params->mac_addr[0] << 8) |
+ (params->mac_addr[1])));
DELAY(30);
}
+static void elink_emac_get_pfc_stat(struct elink_params *params,
+ uint32_t pfc_frames_sent[2],
+ uint32_t pfc_frames_received[2])
+{
+ /* Read pfc statistic */
+ struct bnx2x_softc *sc = params->sc;
+ uint32_t emac_base = params->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+ uint32_t val_xon = 0;
+ uint32_t val_xoff = 0;
+
+ ELINK_DEBUG_P0(sc, "pfc statistic read from EMAC");
+
+ /* PFC received frames */
+ val_xoff = REG_RD(sc, emac_base +
+ EMAC_REG_RX_PFC_STATS_XOFF_RCVD);
+ val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT;
+ val_xon = REG_RD(sc, emac_base + EMAC_REG_RX_PFC_STATS_XON_RCVD);
+ val_xon &= EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT;
+
+ pfc_frames_received[0] = val_xon + val_xoff;
+
+ /* PFC received sent */
+ val_xoff = REG_RD(sc, emac_base +
+ EMAC_REG_RX_PFC_STATS_XOFF_SENT);
+ val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT;
+ val_xon = REG_RD(sc, emac_base + EMAC_REG_RX_PFC_STATS_XON_SENT);
+ val_xon &= EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT;
+
+ pfc_frames_sent[0] = val_xon + val_xoff;
+}
+
+/* Read pfc statistic*/
+void elink_pfc_statistic(struct elink_params *params, struct elink_vars *vars,
+ uint32_t pfc_frames_sent[2],
+ uint32_t pfc_frames_received[2])
+{
+ /* Read pfc statistic */
+ struct bnx2x_softc *sc = params->sc;
+
+ ELINK_DEBUG_P0(sc, "pfc statistic");
+
+ if (!vars->link_up)
+ return;
+
+ if (vars->mac_type == ELINK_MAC_TYPE_EMAC) {
+ ELINK_DEBUG_P0(sc, "About to read PFC stats from EMAC");
+ elink_emac_get_pfc_stat(params, pfc_frames_sent,
+ pfc_frames_received);
+ }
+}
/******************************************************************/
/* MAC/PBF section */
/******************************************************************/
-static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base)
+static void elink_set_mdio_clk(struct bnx2x_softc *sc,
+ __rte_unused uint32_t chip_id,
+ uint32_t emac_base)
{
uint32_t new_mode, cur_mode;
uint32_t clc_cnt;
@@ -1206,26 +2217,16 @@ static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base)
return;
new_mode = cur_mode &
- ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
new_mode |= clc_cnt;
new_mode |= (EMAC_MDIO_MODE_CLAUSE_45);
- PMD_DRV_LOG(DEBUG, sc, "Changing emac_mode from 0x%x to 0x%x",
- cur_mode, new_mode);
+ ELINK_DEBUG_P2(sc, "Changing emac_mode from 0x%x to 0x%x",
+ cur_mode, new_mode);
REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode);
DELAY(40);
}
-static void elink_set_mdio_emac_per_phy(struct bnx2x_softc *sc,
- struct elink_params *params)
-{
- uint8_t phy_index;
- /* Set mdio clock per phy */
- for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
- phy_index++)
- elink_set_mdio_clk(sc, params->phy[phy_index].mdio_ctrl);
-}
-
static uint8_t elink_is_4_port_mode(struct bnx2x_softc *sc)
{
uint32_t port4mode_ovwr_val;
@@ -1233,13 +2234,26 @@ static uint8_t elink_is_4_port_mode(struct bnx2x_softc *sc)
port4mode_ovwr_val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
if (port4mode_ovwr_val & (1 << 0)) {
/* Return 4-port mode override value */
- return (port4mode_ovwr_val & (1 << 1)) == (1 << 1);
+ return ((port4mode_ovwr_val & (1 << 1)) == (1 << 1));
}
/* Return 4-port mode from input pin */
- return (uint8_t) REG_RD(sc, MISC_REG_PORT4MODE_EN);
+ return (uint8_t)REG_RD(sc, MISC_REG_PORT4MODE_EN);
+}
+
+static void elink_set_mdio_emac_per_phy(struct bnx2x_softc *sc,
+ struct elink_params *params)
+{
+ uint8_t phy_index;
+
+ /* Set mdio clock per phy */
+ for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
+ phy_index++)
+ elink_set_mdio_clk(sc, params->chip_id,
+ params->phy[phy_index].mdio_ctrl);
}
-static void elink_emac_init(struct elink_params *params)
+static void elink_emac_init(struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
/* reset and unreset the emac core */
struct bnx2x_softc *sc = params->sc;
@@ -1263,9 +2277,9 @@ static void elink_emac_init(struct elink_params *params)
timeout = 200;
do {
val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
- PMD_DRV_LOG(DEBUG, sc, "EMAC reset reg is %u", val);
+ ELINK_DEBUG_P1(sc, "EMAC reset reg is %u", val);
if (!timeout) {
- PMD_DRV_LOG(DEBUG, sc, "EMAC timeout!");
+ ELINK_DEBUG_P0(sc, "EMAC timeout!");
return;
}
timeout--;
@@ -1273,17 +2287,20 @@ static void elink_emac_init(struct elink_params *params)
elink_set_mdio_emac_per_phy(sc, params);
/* Set mac address */
- val = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
+ val = ((params->mac_addr[0] << 8) |
+ params->mac_addr[1]);
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH, val);
val = ((params->mac_addr[2] << 24) |
(params->mac_addr[3] << 16) |
- (params->mac_addr[4] << 8) | params->mac_addr[5]);
+ (params->mac_addr[4] << 8) |
+ params->mac_addr[5]);
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH + 4, val);
}
static void elink_set_xumac_nig(struct elink_params *params,
- uint16_t tx_pause_en, uint8_t enable)
+ uint16_t tx_pause_en,
+ uint8_t enable)
{
struct bnx2x_softc *sc = params->sc;
@@ -1301,7 +2318,7 @@ static void elink_set_umac_rxtx(struct elink_params *params, uint8_t en)
uint32_t val;
struct bnx2x_softc *sc = params->sc;
if (!(REG_RD(sc, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)))
+ (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)))
return;
val = REG_RD(sc, umac_base + UMAC_REG_COMMAND_CONFIG);
if (en)
@@ -1315,7 +2332,7 @@ static void elink_set_umac_rxtx(struct elink_params *params, uint8_t en)
}
static void elink_umac_enable(struct elink_params *params,
- struct elink_vars *vars, uint8_t lb)
+ struct elink_vars *vars, uint8_t lb)
{
uint32_t val;
uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
@@ -1328,15 +2345,15 @@ static void elink_umac_enable(struct elink_params *params,
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
(MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));
- PMD_DRV_LOG(DEBUG, sc, "enabling UMAC");
+ ELINK_DEBUG_P0(sc, "enabling UMAC");
/* This register opens the gate for the UMAC despite its name */
REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1);
val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN |
- UMAC_COMMAND_CONFIG_REG_PAD_EN |
- UMAC_COMMAND_CONFIG_REG_SW_RESET |
- UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK;
+ UMAC_COMMAND_CONFIG_REG_PAD_EN |
+ UMAC_COMMAND_CONFIG_REG_SW_RESET |
+ UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK;
switch (vars->line_speed) {
case ELINK_SPEED_10:
val |= (0 << 2);
@@ -1351,8 +2368,8 @@ static void elink_umac_enable(struct elink_params *params,
val |= (3 << 2);
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Invalid speed for UMAC %d",
- vars->line_speed);
+ ELINK_DEBUG_P1(sc, "Invalid speed for UMAC %d",
+ vars->line_speed);
break;
}
if (!(vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
@@ -1369,7 +2386,7 @@ static void elink_umac_enable(struct elink_params *params,
/* Configure UMAC for EEE */
if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
- PMD_DRV_LOG(DEBUG, sc, "configured UMAC for EEE");
+ ELINK_DEBUG_P0(sc, "configured UMAC for EEE");
REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL,
UMAC_UMAC_EEE_CTRL_REG_EEE_EN);
REG_WR(sc, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11);
@@ -1381,13 +2398,16 @@ static void elink_umac_enable(struct elink_params *params,
REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR0,
((params->mac_addr[2] << 24) |
(params->mac_addr[3] << 16) |
- (params->mac_addr[4] << 8) | (params->mac_addr[5])));
+ (params->mac_addr[4] << 8) |
+ (params->mac_addr[5])));
REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR1,
- ((params->mac_addr[0] << 8) | (params->mac_addr[1])));
+ ((params->mac_addr[0] << 8) |
+ (params->mac_addr[1])));
/* Enable RX and TX */
val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN;
- val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | UMAC_COMMAND_CONFIG_REG_RX_ENA;
+ val |= UMAC_COMMAND_CONFIG_REG_TX_ENA |
+ UMAC_COMMAND_CONFIG_REG_RX_ENA;
REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val);
DELAY(50);
@@ -1427,7 +2447,8 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
is_port4mode &&
(REG_RD(sc, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
- PMD_DRV_LOG(DEBUG, sc, "XMAC already out of reset in 4-port mode");
+ ELINK_DEBUG_P0(sc,
+ "XMAC already out of reset in 4-port mode");
return;
}
@@ -1439,7 +2460,7 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
MISC_REGISTERS_RESET_REG_2_XMAC);
if (is_port4mode) {
- PMD_DRV_LOG(DEBUG, sc, "Init XMAC to 2 ports x 10G per path");
+ ELINK_DEBUG_P0(sc, "Init XMAC to 2 ports x 10G per path");
/* Set the number of ports on the system side to up to 2 */
REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 1);
@@ -1450,13 +2471,13 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
/* Set the number of ports on the system side to 1 */
REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 0);
if (max_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG, sc,
- "Init XMAC to 10G x 1 port per path");
+ ELINK_DEBUG_P0(sc,
+ "Init XMAC to 10G x 1 port per path");
/* Set the number of ports on the Warp Core to 10G */
REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3);
} else {
- PMD_DRV_LOG(DEBUG, sc,
- "Init XMAC to 20G x 2 ports per path");
+ ELINK_DEBUG_P0(sc,
+ "Init XMAC to 20G x 2 ports per path");
/* Set the number of ports on the Warp Core to 20G */
REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 1);
}
@@ -1478,7 +2499,8 @@ static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en)
uint32_t pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
uint32_t val;
- if (REG_RD(sc, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC) {
+ if (REG_RD(sc, MISC_REG_RESET_REG_2) &
+ MISC_REGISTERS_RESET_REG_2_XMAC) {
/* Send an indication to change the state in the NIG back to XON
* Clearing this bit enables the next set of this bit to get
* rising edge
@@ -1488,7 +2510,7 @@ static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en)
(pfc_ctrl & ~(1 << 1)));
REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI,
(pfc_ctrl | (1 << 1)));
- PMD_DRV_LOG(DEBUG, sc, "Disable XMAC on port %x", port);
+ ELINK_DEBUG_P1(sc, "Disable XMAC on port %x", port);
val = REG_RD(sc, xmac_base + XMAC_REG_CTRL);
if (en)
val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN);
@@ -1499,11 +2521,11 @@ static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en)
}
static elink_status_t elink_xmac_enable(struct elink_params *params,
- struct elink_vars *vars, uint8_t lb)
+ struct elink_vars *vars, uint8_t lb)
{
uint32_t val, xmac_base;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "enabling XMAC");
+ ELINK_DEBUG_P0(sc, "enabling XMAC");
xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
@@ -1537,10 +2559,10 @@ static elink_status_t elink_xmac_enable(struct elink_params *params,
REG_WR(sc, xmac_base + XMAC_REG_TX_CTRL, 0xC800);
/* update PFC */
- elink_update_pfc_xmac(params, vars);
+ elink_update_pfc_xmac(params, vars, 0);
if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
- PMD_DRV_LOG(DEBUG, sc, "Setting XMAC for EEE");
+ ELINK_DEBUG_P0(sc, "Setting XMAC for EEE");
REG_WR(sc, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008);
REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x1);
} else {
@@ -1569,14 +2591,14 @@ static elink_status_t elink_xmac_enable(struct elink_params *params,
}
static elink_status_t elink_emac_enable(struct elink_params *params,
- struct elink_vars *vars, uint8_t lb)
+ struct elink_vars *vars, uint8_t lb)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
uint32_t val;
- PMD_DRV_LOG(DEBUG, sc, "enabling EMAC");
+ ELINK_DEBUG_P0(sc, "enabling EMAC");
/* Disable BMAC */
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
@@ -1585,19 +2607,39 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
/* enable emac and not bmac */
REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 1);
+#ifdef ELINK_INCLUDE_EMUL
+ /* for paladium */
+ if (CHIP_REV_IS_EMUL(sc)) {
+ /* Use lane 1 (of lanes 0-3) */
+ REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
+ REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
+ }
+ /* for fpga */
+ else
+#endif
+#ifdef ELINK_INCLUDE_FPGA
+ if (CHIP_REV_IS_FPGA(sc)) {
+ /* Use lane 1 (of lanes 0-3) */
+ ELINK_DEBUG_P0(sc, "elink_emac_enable: Setting FPGA");
+
+ REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
+ REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
+ } else
+#endif
+ /* ASIC */
if (vars->phy_flags & PHY_XGXS_FLAG) {
uint32_t ser_lane = ((params->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+ PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+ PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
- PMD_DRV_LOG(DEBUG, sc, "XGXS");
+ ELINK_DEBUG_P0(sc, "XGXS");
/* select the master lanes (out of 0-3) */
REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, ser_lane);
/* select XGXS */
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
- } else { /* SerDes */
- PMD_DRV_LOG(DEBUG, sc, "SerDes");
+ } else { /* SerDes */
+ ELINK_DEBUG_P0(sc, "SerDes");
/* select SerDes */
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
}
@@ -1607,28 +2649,39 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
EMAC_TX_MODE_RESET);
- /* pause enable/disable */
- elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
-
- elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
- (EMAC_TX_MODE_EXT_PAUSE_EN |
- EMAC_TX_MODE_FLOW_EN));
- if (!(params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
- if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
- elink_bits_en(sc, emac_base +
- EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
+#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
+ if (CHIP_REV_IS_SLOW(sc)) {
+ /* config GMII mode */
+ val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
+ elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE,
+ (val | EMAC_MODE_PORT_GMII));
+ } else { /* ASIC */
+#endif
+ /* pause enable/disable */
+ elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
+ EMAC_RX_MODE_FLOW_EN);
- if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
- elink_bits_en(sc, emac_base +
- EMAC_REG_EMAC_TX_MODE,
- (EMAC_TX_MODE_EXT_PAUSE_EN |
- EMAC_TX_MODE_FLOW_EN));
- } else
- elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
- EMAC_TX_MODE_FLOW_EN);
+ elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
+ (EMAC_TX_MODE_EXT_PAUSE_EN |
+ EMAC_TX_MODE_FLOW_EN));
+ if (!(params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
+ if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
+ elink_bits_en(sc, emac_base +
+ EMAC_REG_EMAC_RX_MODE,
+ EMAC_RX_MODE_FLOW_EN);
+
+ if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
+ elink_bits_en(sc, emac_base +
+ EMAC_REG_EMAC_TX_MODE,
+ (EMAC_TX_MODE_EXT_PAUSE_EN |
+ EMAC_TX_MODE_FLOW_EN));
+ } else
+ elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
+ EMAC_TX_MODE_FLOW_EN);
+#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
+ }
+#endif
/* KEEP_VLAN_TAG, promiscuous */
val = REG_RD(sc, emac_base + EMAC_REG_EMAC_RX_MODE);
@@ -1643,18 +2696,18 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
*/
elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, 0);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
- PMD_DRV_LOG(DEBUG, sc, "PFC is enabled");
+ ELINK_DEBUG_P0(sc, "PFC is enabled");
/* Enable PFC again */
elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE,
- EMAC_REG_RX_PFC_MODE_RX_EN |
- EMAC_REG_RX_PFC_MODE_TX_EN |
- EMAC_REG_RX_PFC_MODE_PRIORITIES);
+ EMAC_REG_RX_PFC_MODE_RX_EN |
+ EMAC_REG_RX_PFC_MODE_TX_EN |
+ EMAC_REG_RX_PFC_MODE_PRIORITIES);
elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_PARAM,
- ((0x0101 <<
- EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) |
- (0x00ff <<
- EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT)));
+ ((0x0101 <<
+ EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) |
+ (0x00ff <<
+ EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT)));
val |= EMAC_RX_MODE_KEEP_MAC_CONTROL;
}
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MODE, val);
@@ -1672,9 +2725,8 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
/* Enable emac for jumbo packets */
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MTU_SIZE,
- (EMAC_RX_MTU_SIZE_JUMBO_ENA |
- (ELINK_ETH_MAX_JUMBO_PACKET_SIZE +
- ELINK_ETH_OVREHEAD)));
+ (EMAC_RX_MTU_SIZE_JUMBO_ENA |
+ (ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD)));
/* Strip CRC */
REG_WR(sc, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port * 4, 0x1);
@@ -1688,13 +2740,23 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0x1);
val = 0;
if ((params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
+ ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
(vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
val = 1;
REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, val);
REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x1);
+#ifdef ELINK_INCLUDE_EMUL
+ if (CHIP_REV_IS_EMUL(sc)) {
+ /* Take the BigMac out of reset */
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+ /* Enable access for bmac registers */
+ REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1);
+ } else
+#endif
REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x0);
vars->mac_type = ELINK_MAC_TYPE_EMAC;
@@ -1706,13 +2768,13 @@ static void elink_update_pfc_bmac1(struct elink_params *params,
{
uint32_t wb_data[2];
struct bnx2x_softc *sc = params->sc;
- uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
+ NIG_REG_INGRESS_BMAC0_MEM;
uint32_t val = 0x14;
if ((!(params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
- (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
+ ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
+ (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
/* Enable BigMAC to react on received Pause packets */
val |= (1 << 5);
wb_data[0] = val;
@@ -1723,7 +2785,7 @@ static void elink_update_pfc_bmac1(struct elink_params *params,
val = 0xc0;
if (!(params->feature_config_flags &
ELINK_FEATURE_CONFIG_PFC_ENABLED) &&
- (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
+ (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
val |= 0x800000;
wb_data[0] = val;
wb_data[1] = 0;
@@ -1731,7 +2793,8 @@ static void elink_update_pfc_bmac1(struct elink_params *params,
}
static void elink_update_pfc_bmac2(struct elink_params *params,
- struct elink_vars *vars, uint8_t is_lb)
+ struct elink_vars *vars,
+ uint8_t is_lb)
{
/* Set rx control: Strip CRC and enable BigMAC to relay
* control packets to the system as well
@@ -1739,12 +2802,12 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
uint32_t wb_data[2];
struct bnx2x_softc *sc = params->sc;
uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ NIG_REG_INGRESS_BMAC0_MEM;
uint32_t val = 0x14;
if ((!(params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
- (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
+ ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
+ (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
/* Enable BigMAC to react on received Pause packets */
val |= (1 << 5);
wb_data[0] = val;
@@ -1755,7 +2818,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
/* Tx control */
val = 0xc0;
if (!(params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED) &&
+ ELINK_FEATURE_CONFIG_PFC_ENABLED) &&
(vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
val |= 0x800000;
wb_data[0] = val;
@@ -1763,21 +2826,21 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
- PMD_DRV_LOG(DEBUG, sc, "PFC is enabled");
+ ELINK_DEBUG_P0(sc, "PFC is enabled");
/* Enable PFC RX & TX & STATS and set 8 COS */
wb_data[0] = 0x0;
- wb_data[0] |= (1 << 0); /* RX */
- wb_data[0] |= (1 << 1); /* TX */
- wb_data[0] |= (1 << 2); /* Force initial Xon */
- wb_data[0] |= (1 << 3); /* 8 cos */
- wb_data[0] |= (1 << 5); /* STATS */
+ wb_data[0] |= (1 << 0); /* RX */
+ wb_data[0] |= (1 << 1); /* TX */
+ wb_data[0] |= (1 << 2); /* Force initial Xon */
+ wb_data[0] |= (1 << 3); /* 8 cos */
+ wb_data[0] |= (1 << 5); /* STATS */
wb_data[1] = 0;
REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL,
wb_data, 2);
/* Clear the force Xon */
wb_data[0] &= ~(1 << 2);
} else {
- PMD_DRV_LOG(DEBUG, sc, "PFC is disabled");
+ ELINK_DEBUG_P0(sc, "PFC is disabled");
/* Disable PFC RX & TX & STATS and set 8 COS */
wb_data[0] = 0x8;
wb_data[1] = 0;
@@ -1792,7 +2855,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
*/
val = 0x8000;
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
- val |= (1 << 16); /* enable automatic re-send */
+ val |= (1 << 16); /* enable automatic re-send */
wb_data[0] = val;
wb_data[1] = 0;
@@ -1800,10 +2863,10 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
wb_data, 2);
/* mac control */
- val = 0x3; /* Enable RX and TX */
+ val = 0x3; /* Enable RX and TX */
if (is_lb) {
- val |= 0x4; /* Local loopback */
- PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback");
+ val |= 0x4; /* Local loopback */
+ ELINK_DEBUG_P0(sc, "enable bmac loopback");
}
/* When PFC enabled, Pass pause frames towards the NIG. */
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
@@ -1815,47 +2878,46 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
}
/******************************************************************************
-* Description:
-* This function is needed because NIG ARB_CREDIT_WEIGHT_X are
-* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable.
-******************************************************************************/
+ * Description:
+ * This function is needed because NIG ARB_CREDIT_WEIGHT_X are
+ * not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable.
+ ******************************************************************************/
static elink_status_t elink_pfc_nig_rx_priority_mask(struct bnx2x_softc *sc,
- uint8_t cos_entry,
- uint32_t priority_mask,
- uint8_t port)
+ uint8_t cos_entry,
+ uint32_t priority_mask, uint8_t port)
{
uint32_t nig_reg_rx_priority_mask_add = 0;
switch (cos_entry) {
case 0:
- nig_reg_rx_priority_mask_add = (port) ?
- NIG_REG_P1_RX_COS0_PRIORITY_MASK :
- NIG_REG_P0_RX_COS0_PRIORITY_MASK;
+ nig_reg_rx_priority_mask_add = (port) ?
+ NIG_REG_P1_RX_COS0_PRIORITY_MASK :
+ NIG_REG_P0_RX_COS0_PRIORITY_MASK;
break;
case 1:
- nig_reg_rx_priority_mask_add = (port) ?
- NIG_REG_P1_RX_COS1_PRIORITY_MASK :
- NIG_REG_P0_RX_COS1_PRIORITY_MASK;
+ nig_reg_rx_priority_mask_add = (port) ?
+ NIG_REG_P1_RX_COS1_PRIORITY_MASK :
+ NIG_REG_P0_RX_COS1_PRIORITY_MASK;
break;
case 2:
- nig_reg_rx_priority_mask_add = (port) ?
- NIG_REG_P1_RX_COS2_PRIORITY_MASK :
- NIG_REG_P0_RX_COS2_PRIORITY_MASK;
+ nig_reg_rx_priority_mask_add = (port) ?
+ NIG_REG_P1_RX_COS2_PRIORITY_MASK :
+ NIG_REG_P0_RX_COS2_PRIORITY_MASK;
break;
case 3:
if (port)
- return ELINK_STATUS_ERROR;
- nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK;
+ return ELINK_STATUS_ERROR;
+ nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK;
break;
case 4:
if (port)
- return ELINK_STATUS_ERROR;
- nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK;
+ return ELINK_STATUS_ERROR;
+ nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK;
break;
case 5:
if (port)
- return ELINK_STATUS_ERROR;
- nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK;
+ return ELINK_STATUS_ERROR;
+ nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK;
break;
}
@@ -1863,7 +2925,6 @@ static elink_status_t elink_pfc_nig_rx_priority_mask(struct bnx2x_softc *sc,
return ELINK_STATUS_OK;
}
-
static void elink_update_mng(struct elink_params *params, uint32_t link_status)
{
struct bnx2x_softc *sc = params->sc;
@@ -1873,31 +2934,20 @@ static void elink_update_mng(struct elink_params *params, uint32_t link_status)
port_mb[params->port].link_status), link_status);
}
-static void elink_update_link_attr(struct elink_params *params,
- uint32_t link_attr)
-{
- struct bnx2x_softc *sc = params->sc;
-
- if (SHMEM2_HAS(sc, link_attr_sync))
- REG_WR(sc, params->shmem2_base +
- offsetof(struct shmem2_region,
- link_attr_sync[params->port]), link_attr);
-}
-
static void elink_update_pfc_nig(struct elink_params *params,
- struct elink_nig_brb_pfc_port_params
- *nig_params)
+ __rte_unused struct elink_vars *vars,
+ struct elink_nig_brb_pfc_port_params *nig_params)
{
- uint32_t xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en =
- 0;
+ uint32_t xcm_mask = 0, ppp_enable = 0, pause_enable = 0;
+ uint32_t llfc_out_en = 0;
uint32_t llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0;
uint32_t pkt_priority_to_cos = 0;
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
int set_pfc = params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED;
- PMD_DRV_LOG(DEBUG, sc, "updating pfc nig parameters");
+ ELINK_FEATURE_CONFIG_PFC_ENABLED;
+ ELINK_DEBUG_P0(sc, "updating pfc nig parameters");
/* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
* MAC control frames (that are not pause packets)
@@ -1917,19 +2967,19 @@ static void elink_update_pfc_nig(struct elink_params *params,
else
ppp_enable = 1;
xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
- NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
+ NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
xcm_out_en = 0;
hwpfc_enable = 1;
- } else {
+ } else {
if (nig_params) {
llfc_out_en = nig_params->llfc_out_en;
llfc_enable = nig_params->llfc_enable;
pause_enable = nig_params->pause_enable;
- } else /* Default non PFC mode - PAUSE */
+ } else /* Default non PFC mode - PAUSE */
pause_enable = 1;
xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
- NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
+ NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
xcm_out_en = 1;
}
@@ -1966,9 +3016,7 @@ static void elink_update_pfc_nig(struct elink_params *params,
for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++)
elink_pfc_nig_rx_priority_mask(sc, i,
- nig_params->
- rx_cos_priority_mask[i],
- port);
+ nig_params->rx_cos_priority_mask[i], port);
REG_WR(sc, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 :
NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0,
@@ -1979,13 +3027,13 @@ static void elink_update_pfc_nig(struct elink_params *params,
nig_params->llfc_low_priority_classes);
}
REG_WR(sc, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS :
- NIG_REG_P0_PKT_PRIORITY_TO_COS, pkt_priority_to_cos);
+ NIG_REG_P0_PKT_PRIORITY_TO_COS,
+ pkt_priority_to_cos);
}
elink_status_t elink_update_pfc(struct elink_params *params,
- struct elink_vars *vars,
- struct elink_nig_brb_pfc_port_params
- *pfc_params)
+ struct elink_vars *vars,
+ struct elink_nig_brb_pfc_port_params *pfc_params)
{
/* The PFC and pause are orthogonal to one another, meaning when
* PFC is enabled, the pause are disabled, and when PFC is
@@ -1993,7 +3041,6 @@ elink_status_t elink_update_pfc(struct elink_params *params,
*/
uint32_t val;
struct bnx2x_softc *sc = params->sc;
- elink_status_t elink_status = ELINK_STATUS_OK;
uint8_t bmac_loopback = (params->loopback_mode == ELINK_LOOPBACK_BMAC);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
@@ -2004,24 +3051,24 @@ elink_status_t elink_update_pfc(struct elink_params *params,
elink_update_mng(params, vars->link_status);
/* Update NIG params */
- elink_update_pfc_nig(params, pfc_params);
+ elink_update_pfc_nig(params, vars, pfc_params);
if (!vars->link_up)
- return elink_status;
+ return ELINK_STATUS_OK;
- PMD_DRV_LOG(DEBUG, sc, "About to update PFC in BMAC");
+ ELINK_DEBUG_P0(sc, "About to update PFC in BMAC");
if (CHIP_IS_E3(sc)) {
if (vars->mac_type == ELINK_MAC_TYPE_XMAC)
- elink_update_pfc_xmac(params, vars);
+ elink_update_pfc_xmac(params, vars, 0);
} else {
val = REG_RD(sc, MISC_REG_RESET_REG_2);
if ((val &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
== 0) {
- PMD_DRV_LOG(DEBUG, sc, "About to update PFC in EMAC");
+ ELINK_DEBUG_P0(sc, "About to update PFC in EMAC");
elink_emac_enable(params, vars, 0);
- return elink_status;
+ return ELINK_STATUS_OK;
}
if (CHIP_IS_E2(sc))
elink_update_pfc_bmac2(params, vars, bmac_loopback);
@@ -2035,20 +3082,21 @@ elink_status_t elink_update_pfc(struct elink_params *params,
val = 1;
REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port * 4, val);
}
- return elink_status;
+ return ELINK_STATUS_OK;
}
static elink_status_t elink_bmac1_enable(struct elink_params *params,
- struct elink_vars *vars, uint8_t is_lb)
+ struct elink_vars *vars,
+ uint8_t is_lb)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ NIG_REG_INGRESS_BMAC0_MEM;
uint32_t wb_data[2];
uint32_t val;
- PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC1");
+ ELINK_DEBUG_P0(sc, "Enabling BigMAC1");
/* XGXS control */
wb_data[0] = 0x3c;
@@ -2058,16 +3106,18 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params,
/* TX MAC SA */
wb_data[0] = ((params->mac_addr[2] << 24) |
- (params->mac_addr[3] << 16) |
- (params->mac_addr[4] << 8) | params->mac_addr[5]);
- wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
+ (params->mac_addr[3] << 16) |
+ (params->mac_addr[4] << 8) |
+ params->mac_addr[5]);
+ wb_data[1] = ((params->mac_addr[0] << 8) |
+ params->mac_addr[1]);
REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, wb_data, 2);
/* MAC control */
val = 0x3;
if (is_lb) {
val |= 0x4;
- PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback");
+ ELINK_DEBUG_P0(sc, "enable bmac loopback");
}
wb_data[0] = val;
wb_data[1] = 0;
@@ -2095,20 +3145,30 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params,
wb_data[1] = 0;
REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
wb_data, 2);
+#ifdef ELINK_INCLUDE_EMUL
+ /* Fix for emulation */
+ if (CHIP_REV_IS_EMUL(sc)) {
+ wb_data[0] = 0xf000;
+ wb_data[1] = 0;
+ REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
+ wb_data, 2);
+ }
+#endif
return ELINK_STATUS_OK;
}
static elink_status_t elink_bmac2_enable(struct elink_params *params,
- struct elink_vars *vars, uint8_t is_lb)
+ struct elink_vars *vars,
+ uint8_t is_lb)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ NIG_REG_INGRESS_BMAC0_MEM;
uint32_t wb_data[2];
- PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC2");
+ ELINK_DEBUG_P0(sc, "Enabling BigMAC2");
wb_data[0] = 0;
wb_data[1] = 0;
@@ -2125,9 +3185,11 @@ static elink_status_t elink_bmac2_enable(struct elink_params *params,
/* TX MAC SA */
wb_data[0] = ((params->mac_addr[2] << 24) |
- (params->mac_addr[3] << 16) |
- (params->mac_addr[4] << 8) | params->mac_addr[5]);
- wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
+ (params->mac_addr[3] << 16) |
+ (params->mac_addr[4] << 8) |
+ params->mac_addr[5]);
+ wb_data[1] = ((params->mac_addr[0] << 8) |
+ params->mac_addr[1]);
REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_SOURCE_ADDR,
wb_data, 2);
@@ -2162,8 +3224,8 @@ static elink_status_t elink_bmac2_enable(struct elink_params *params,
}
static elink_status_t elink_bmac_enable(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t is_lb, uint8_t reset_bmac)
+ struct elink_vars *vars,
+ uint8_t is_lb, uint8_t reset_bmac)
{
elink_status_t rc = ELINK_STATUS_OK;
uint8_t port = params->port;
@@ -2182,7 +3244,7 @@ static elink_status_t elink_bmac_enable(struct elink_params *params,
/* Enable access for bmac registers */
REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1);
- /* Enable BMAC according to BMAC type */
+ /* Enable BMAC according to BMAC type*/
if (CHIP_IS_E2(sc))
rc = elink_bmac2_enable(params, vars, is_lb);
else
@@ -2192,7 +3254,7 @@ static elink_status_t elink_bmac_enable(struct elink_params *params,
REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 0x0);
val = 0;
if ((params->feature_config_flags &
- ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
+ ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
(vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
val = 1;
REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + port * 4, val);
@@ -2206,13 +3268,15 @@ static elink_status_t elink_bmac_enable(struct elink_params *params,
return rc;
}
-static void elink_set_bmac_rx(struct bnx2x_softc *sc, uint8_t port, uint8_t en)
+static void elink_set_bmac_rx(struct bnx2x_softc *sc,
+ __rte_unused uint32_t chip_id,
+ uint8_t port, uint8_t en)
{
uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ NIG_REG_INGRESS_BMAC0_MEM;
uint32_t wb_data[2];
- uint32_t nig_bmac_enable =
- REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
+ uint32_t nig_bmac_enable = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN +
+ port * 4);
if (CHIP_IS_E2(sc))
bmac_addr += BIGMAC2_REGISTER_BMAC_CONTROL;
@@ -2220,7 +3284,8 @@ static void elink_set_bmac_rx(struct bnx2x_softc *sc, uint8_t port, uint8_t en)
bmac_addr += BIGMAC_REGISTER_BMAC_CONTROL;
/* Only if the bmac is out of reset */
if (REG_RD(sc, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && nig_bmac_enable) {
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) &&
+ nig_bmac_enable) {
/* Clear Rx Enable bit in BMAC_CONTROL register */
REG_RD_DMAE(sc, bmac_addr, wb_data, 2);
if (en)
@@ -2233,7 +3298,8 @@ static void elink_set_bmac_rx(struct bnx2x_softc *sc, uint8_t port, uint8_t en)
}
static elink_status_t elink_pbf_update(struct elink_params *params,
- uint32_t flow_ctrl, uint32_t line_speed)
+ uint32_t flow_ctrl,
+ uint32_t line_speed)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
@@ -2246,7 +3312,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
/* Wait for init credit */
init_crd = REG_RD(sc, PBF_REG_P0_INIT_CRD + port * 4);
crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
- PMD_DRV_LOG(DEBUG, sc, "init_crd 0x%x crd 0x%x", init_crd, crd);
+ ELINK_DEBUG_P2(sc, "init_crd 0x%x crd 0x%x", init_crd, crd);
while ((init_crd != crd) && count) {
DELAY(1000 * 5);
@@ -2255,24 +3321,25 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
}
crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
if (init_crd != crd) {
- PMD_DRV_LOG(DEBUG, sc, "BUG! init_crd 0x%x != crd 0x%x",
- init_crd, crd);
+ ELINK_DEBUG_P2(sc, "BUG! init_crd 0x%x != crd 0x%x",
+ init_crd, crd);
return ELINK_STATUS_ERROR;
}
if (flow_ctrl & ELINK_FLOW_CTRL_RX ||
line_speed == ELINK_SPEED_10 ||
line_speed == ELINK_SPEED_100 ||
- line_speed == ELINK_SPEED_1000 || line_speed == ELINK_SPEED_2500) {
+ line_speed == ELINK_SPEED_1000 ||
+ line_speed == ELINK_SPEED_2500) {
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 1);
/* Update threshold */
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, 0);
/* Update init credit */
- init_crd = 778; /* (800-18-4) */
+ init_crd = 778; /* (800-18-4) */
} else {
uint32_t thresh = (ELINK_ETH_MAX_JUMBO_PACKET_SIZE +
- ELINK_ETH_OVREHEAD) / 16;
+ ELINK_ETH_OVREHEAD) / 16;
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
/* Update threshold */
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, thresh);
@@ -2282,14 +3349,14 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
init_crd = thresh + 553 - 22;
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x",
- line_speed);
+ ELINK_DEBUG_P1(sc, "Invalid line_speed 0x%x",
+ line_speed);
return ELINK_STATUS_ERROR;
}
}
REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, init_crd);
- PMD_DRV_LOG(DEBUG, sc, "PBF updated to speed %d credit %d",
- line_speed, init_crd);
+ ELINK_DEBUG_P2(sc, "PBF updated to speed %d credit %d",
+ line_speed, init_crd);
/* Probe the credit changes */
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0x1);
@@ -2317,7 +3384,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
* the emac_base for the CL45 read/writes operations
*/
static uint32_t elink_get_emac_base(struct bnx2x_softc *sc,
- uint32_t mdc_mdio_access, uint8_t port)
+ uint32_t mdc_mdio_access, uint8_t port)
{
uint32_t emac_base = 0;
switch (mdc_mdio_access) {
@@ -2365,7 +3432,8 @@ static elink_status_t elink_cl22_write(struct bnx2x_softc *sc,
/* Address */
tmp = ((phy->addr << 21) | (reg << 16) | val |
- EMAC_MDIO_COMM_COMMAND_WRITE_22 | EMAC_MDIO_COMM_START_BUSY);
+ EMAC_MDIO_COMM_COMMAND_WRITE_22 |
+ EMAC_MDIO_COMM_START_BUSY);
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
@@ -2378,7 +3446,7 @@ static elink_status_t elink_cl22_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
+ ELINK_DEBUG_P0(sc, "write phy register failed");
rc = ELINK_STATUS_TIMEOUT;
}
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
@@ -2387,7 +3455,7 @@ static elink_status_t elink_cl22_write(struct bnx2x_softc *sc,
static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
struct elink_phy *phy,
- uint16_t reg, uint16_t * ret_val)
+ uint16_t reg, uint16_t *ret_val)
{
uint32_t val, mode;
uint16_t i;
@@ -2400,7 +3468,8 @@ static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
/* Address */
val = ((phy->addr << 21) | (reg << 16) |
- EMAC_MDIO_COMM_COMMAND_READ_22 | EMAC_MDIO_COMM_START_BUSY);
+ EMAC_MDIO_COMM_COMMAND_READ_22 |
+ EMAC_MDIO_COMM_START_BUSY);
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
@@ -2408,13 +3477,13 @@ static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
val = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- *ret_val = (uint16_t) (val & EMAC_MDIO_COMM_DATA);
+ *ret_val = (uint16_t)(val & EMAC_MDIO_COMM_DATA);
DELAY(5);
break;
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
+ ELINK_DEBUG_P0(sc, "read phy register failed");
*ret_val = 0;
rc = ELINK_STATUS_TIMEOUT;
@@ -2427,14 +3496,17 @@ static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
/* CL45 access functions */
/******************************************************************/
static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t devad,
- uint16_t reg, uint16_t * ret_val)
+ struct elink_phy *phy,
+ uint8_t devad, uint16_t reg, uint16_t *ret_val)
{
uint32_t val;
uint16_t i;
elink_status_t rc = ELINK_STATUS_OK;
+ uint32_t chip_id;
if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) {
- elink_set_mdio_clk(sc, phy->mdio_ctrl);
+ chip_id = (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
+ ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);
+ elink_set_mdio_clk(sc, chip_id, phy->mdio_ctrl);
}
if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
@@ -2442,7 +3514,8 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
EMAC_MDIO_STATUS_10MB);
/* Address */
val = ((phy->addr << 21) | (devad << 16) | reg |
- EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY);
+ EMAC_MDIO_COMM_COMMAND_ADDRESS |
+ EMAC_MDIO_COMM_START_BUSY);
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
@@ -2455,8 +3528,9 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
- elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
+ ELINK_DEBUG_P0(sc, "read phy register failed");
+ elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);
+ /* "MDC/MDIO access timeout" */
*ret_val = 0;
rc = ELINK_STATUS_TIMEOUT;
@@ -2473,14 +3547,16 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
val = REG_RD(sc, phy->mdio_ctrl +
EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- *ret_val =
- (uint16_t) (val & EMAC_MDIO_COMM_DATA);
+ *ret_val = (uint16_t)
+ (val & EMAC_MDIO_COMM_DATA);
break;
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
- elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
+ ELINK_DEBUG_P0(sc, "read phy register failed");
+ elink_cb_event_log(sc,
+ ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);
+ /* "MDC/MDIO access timeout" */
*ret_val = 0;
rc = ELINK_STATUS_TIMEOUT;
@@ -2502,14 +3578,17 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
}
static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t devad,
- uint16_t reg, uint16_t val)
+ struct elink_phy *phy,
+ uint8_t devad, uint16_t reg, uint16_t val)
{
uint32_t tmp;
uint8_t i;
elink_status_t rc = ELINK_STATUS_OK;
+ uint32_t chip_id;
if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) {
- elink_set_mdio_clk(sc, phy->mdio_ctrl);
+ chip_id = (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
+ ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);
+ elink_set_mdio_clk(sc, chip_id, phy->mdio_ctrl);
}
if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
@@ -2518,7 +3597,8 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
/* Address */
tmp = ((phy->addr << 21) | (devad << 16) | reg |
- EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY);
+ EMAC_MDIO_COMM_COMMAND_ADDRESS |
+ EMAC_MDIO_COMM_START_BUSY);
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
@@ -2531,8 +3611,9 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
- elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
+ ELINK_DEBUG_P0(sc, "write phy register failed");
+ elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);
+ /* "MDC/MDIO access timeout" */
rc = ELINK_STATUS_TIMEOUT;
} else {
@@ -2553,8 +3634,10 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
- elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
+ ELINK_DEBUG_P0(sc, "write phy register failed");
+ elink_cb_event_log(sc,
+ ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);
+ /* "MDC/MDIO access timeout" */
rc = ELINK_STATUS_TIMEOUT;
}
@@ -2581,14 +3664,14 @@ static uint8_t elink_eee_has_cap(struct elink_params *params)
struct bnx2x_softc *sc = params->sc;
if (REG_RD(sc, params->shmem2_base) <=
- offsetof(struct shmem2_region, eee_status[params->port]))
- return 0;
+ offsetof(struct shmem2_region, eee_status[params->port]))
+ return 0;
return 1;
}
static elink_status_t elink_eee_nvram_to_time(uint32_t nvram_mode,
- uint32_t * idle_timer)
+ uint32_t *idle_timer)
{
switch (nvram_mode) {
case PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED:
@@ -2609,7 +3692,7 @@ static elink_status_t elink_eee_nvram_to_time(uint32_t nvram_mode,
}
static elink_status_t elink_eee_time_to_nvram(uint32_t idle_timer,
- uint32_t * nvram_mode)
+ uint32_t *nvram_mode)
{
switch (idle_timer) {
case ELINK_EEE_MODE_NVRAM_BALANCED_TIME:
@@ -2636,7 +3719,7 @@ static uint32_t elink_eee_calc_timer(struct elink_params *params)
if (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) {
if (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME) {
- /* time value in eee_mode --> used directly */
+ /* time value in eee_mode --> used directly*/
eee_idle = params->eee_mode & ELINK_EEE_MODE_TIMER_MASK;
} else {
/* hsi value in eee_mode --> time */
@@ -2646,12 +3729,11 @@ static uint32_t elink_eee_calc_timer(struct elink_params *params)
return 0;
}
} else {
- /* hsi values in nvram --> time */
+ /* hsi values in nvram --> time*/
eee_mode = ((REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config
- [params->
- port].eee_power_mode)) &
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].
+ eee_power_mode)) &
PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
@@ -2663,7 +3745,7 @@ static uint32_t elink_eee_calc_timer(struct elink_params *params)
}
static elink_status_t elink_eee_set_timers(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars)
{
uint32_t eee_idle = 0, eee_mode;
struct bnx2x_softc *sc = params->sc;
@@ -2676,7 +3758,7 @@ static elink_status_t elink_eee_set_timers(struct elink_params *params,
} else if ((params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) &&
(params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) &&
(params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME)) {
- PMD_DRV_LOG(DEBUG, sc, "Error: Tx LPI is enabled with timer 0");
+ ELINK_DEBUG_P0(sc, "Error: Tx LPI is enabled with timer 0");
return ELINK_STATUS_ERROR;
}
@@ -2685,7 +3767,7 @@ static elink_status_t elink_eee_set_timers(struct elink_params *params,
/* eee_idle in 1u --> eee_status in 16u */
eee_idle >>= 4;
vars->eee_status |= (eee_idle & SHMEM_EEE_TIMER_MASK) |
- SHMEM_EEE_TIME_OUTPUT_BIT;
+ SHMEM_EEE_TIME_OUTPUT_BIT;
} else {
if (elink_eee_time_to_nvram(eee_idle, &eee_mode))
return ELINK_STATUS_ERROR;
@@ -2696,8 +3778,7 @@ static elink_status_t elink_eee_set_timers(struct elink_params *params,
}
static elink_status_t elink_eee_initial_config(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t mode)
+ struct elink_vars *vars, uint8_t mode)
{
vars->eee_status |= ((uint32_t) mode) << SHMEM_EEE_SUPPORTED_SHIFT;
@@ -2716,8 +3797,8 @@ static elink_status_t elink_eee_initial_config(struct elink_params *params,
}
static elink_status_t elink_eee_disable(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
@@ -2732,9 +3813,8 @@ static elink_status_t elink_eee_disable(struct elink_phy *phy,
}
static elink_status_t elink_eee_advertise(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars,
- uint8_t modes)
+ struct elink_params *params,
+ struct elink_vars *vars, uint8_t modes)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val = 0;
@@ -2743,11 +3823,11 @@ static elink_status_t elink_eee_advertise(struct elink_phy *phy,
REG_WR(sc, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20);
if (modes & SHMEM_EEE_10G_ADV) {
- PMD_DRV_LOG(DEBUG, sc, "Advertise 10GBase-T EEE");
+ ELINK_DEBUG_P0(sc, "Advertise 10GBase-T EEE");
val |= 0x8;
}
if (modes & SHMEM_EEE_1G_ADV) {
- PMD_DRV_LOG(DEBUG, sc, "Advertise 1GBase-T EEE");
+ ELINK_DEBUG_P0(sc, "Advertise 1GBase-T EEE");
val |= 0x4;
}
@@ -2771,8 +3851,8 @@ static void elink_update_mng_eee(struct elink_params *params,
}
static void elink_eee_an_resolve(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t adv = 0, lp = 0;
@@ -2787,7 +3867,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x2) {
if (vars->line_speed == ELINK_SPEED_100)
neg = 1;
- PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 100M");
+ ELINK_DEBUG_P0(sc, "EEE negotiated - 100M");
}
}
if (lp & 0x14) {
@@ -2795,7 +3875,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x14) {
if (vars->line_speed == ELINK_SPEED_1000)
neg = 1;
- PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 1G");
+ ELINK_DEBUG_P0(sc, "EEE negotiated - 1G");
}
}
if (lp & 0x68) {
@@ -2803,7 +3883,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x68) {
if (vars->line_speed == ELINK_SPEED_10000)
neg = 1;
- PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 10G");
+ ELINK_DEBUG_P0(sc, "EEE negotiated - 10G");
}
}
@@ -2811,7 +3891,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT);
if (neg) {
- PMD_DRV_LOG(DEBUG, sc, "EEE is active");
+ ELINK_DEBUG_P0(sc, "EEE is active");
vars->eee_status |= SHMEM_EEE_ACTIVE_BIT;
}
}
@@ -2832,37 +3912,34 @@ static void elink_bsc_module_sel(struct elink_params *params)
dev_info.shared_hw_config.board));
i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK;
i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >>
- SHARED_HW_CFG_E3_I2C_MUX1_SHIFT;
+ SHARED_HW_CFG_E3_I2C_MUX1_SHIFT;
/* Read I2C output value */
sfp_ctrl = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- e3_cmn_pin_cfg));
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg));
i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0;
i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0;
- PMD_DRV_LOG(DEBUG, sc, "Setting BSC switch");
+ ELINK_DEBUG_P0(sc, "Setting BSC switch");
for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++)
elink_set_cfg_pin(sc, i2c_pins[idx], i2c_val[idx]);
}
-static elink_status_t elink_bsc_read(struct elink_params *params,
- struct bnx2x_softc *sc,
- uint8_t sl_devid,
- uint16_t sl_addr,
- uint8_t lc_addr,
- uint8_t xfer_cnt, uint32_t * data_array)
+static elink_status_t elink_bsc_read(struct bnx2x_softc *sc,
+ uint8_t sl_devid,
+ uint16_t sl_addr,
+ uint8_t lc_addr,
+ uint8_t xfer_cnt,
+ uint32_t *data_array)
{
uint32_t val, i;
elink_status_t rc = ELINK_STATUS_OK;
if (xfer_cnt > 16) {
- PMD_DRV_LOG(DEBUG, sc, "invalid xfer_cnt %d. Max is 16 bytes",
- xfer_cnt);
+ ELINK_DEBUG_P1(sc, "invalid xfer_cnt %d. Max is 16 bytes",
+ xfer_cnt);
return ELINK_STATUS_ERROR;
}
- if (params)
- elink_bsc_module_sel(params);
xfer_cnt = 16 - lc_addr;
@@ -2875,11 +3952,11 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
val = (sl_devid << 16) | sl_addr;
REG_WR(sc, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val);
- /* Start xfer with 0 byte to update the address pointer ??? */
+ /* Start xfer with 0 byte to update the address pointer ???*/
val = (MCPR_IMC_COMMAND_ENABLE) |
- (MCPR_IMC_COMMAND_WRITE_OP <<
- MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
- (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0);
+ (MCPR_IMC_COMMAND_WRITE_OP <<
+ MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
+ (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0);
REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val);
/* Poll for completion */
@@ -2889,8 +3966,8 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
DELAY(10);
val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
if (i++ > 1000) {
- PMD_DRV_LOG(DEBUG, sc, "wr 0 byte timed out after %d try",
- i);
+ ELINK_DEBUG_P1(sc, "wr 0 byte timed out after %d try",
+ i);
rc = ELINK_STATUS_TIMEOUT;
break;
}
@@ -2900,10 +3977,10 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
/* Start xfer with read op */
val = (MCPR_IMC_COMMAND_ENABLE) |
- (MCPR_IMC_COMMAND_READ_OP <<
- MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
- (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) |
- (xfer_cnt);
+ (MCPR_IMC_COMMAND_READ_OP <<
+ MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
+ (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) |
+ (xfer_cnt);
REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val);
/* Poll for completion */
@@ -2913,8 +3990,7 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
DELAY(10);
val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
if (i++ > 1000) {
- PMD_DRV_LOG(DEBUG, sc,
- "rd op timed out after %d try", i);
+ ELINK_DEBUG_P1(sc, "rd op timed out after %d try", i);
rc = ELINK_STATUS_TIMEOUT;
break;
}
@@ -2926,17 +4002,18 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
data_array[i] = REG_RD(sc, (MCP_REG_MCPR_IMC_DATAREG0 + i * 4));
#ifdef __BIG_ENDIAN
data_array[i] = ((data_array[i] & 0x000000ff) << 24) |
- ((data_array[i] & 0x0000ff00) << 8) |
- ((data_array[i] & 0x00ff0000) >> 8) |
- ((data_array[i] & 0xff000000) >> 24);
+ ((data_array[i] & 0x0000ff00) << 8) |
+ ((data_array[i] & 0x00ff0000) >> 8) |
+ ((data_array[i] & 0xff000000) >> 24);
#endif
}
return rc;
}
static void elink_cl45_read_or_write(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t devad,
- uint16_t reg, uint16_t or_val)
+ struct elink_phy *phy,
+ uint8_t devad, uint16_t reg,
+ uint16_t or_val)
{
uint16_t val;
elink_cl45_read(sc, phy, devad, reg, &val);
@@ -2953,7 +4030,42 @@ static void elink_cl45_read_and_write(struct bnx2x_softc *sc,
elink_cl45_write(sc, phy, devad, reg, val & and_val);
}
-static uint8_t elink_get_warpcore_lane(struct elink_params *params)
+elink_status_t elink_phy_read(struct elink_params *params, uint8_t phy_addr,
+ uint8_t devad, uint16_t reg, uint16_t *ret_val)
+{
+ uint8_t phy_index;
+ /* Probe for the phy according to the given phy_addr, and execute
+ * the read request on it
+ */
+ for (phy_index = 0; phy_index < params->num_phys; phy_index++) {
+ if (params->phy[phy_index].addr == phy_addr) {
+ return elink_cl45_read(params->sc,
+ &params->phy[phy_index], devad,
+ reg, ret_val);
+ }
+ }
+ return ELINK_STATUS_ERROR;
+}
+
+elink_status_t elink_phy_write(struct elink_params *params, uint8_t phy_addr,
+ uint8_t devad, uint16_t reg, uint16_t val)
+{
+ uint8_t phy_index;
+ /* Probe for the phy according to the given phy_addr, and execute
+ * the write request on it
+ */
+ for (phy_index = 0; phy_index < params->num_phys; phy_index++) {
+ if (params->phy[phy_index].addr == phy_addr) {
+ return elink_cl45_write(params->sc,
+ &params->phy[phy_index], devad,
+ reg, val);
+ }
+ }
+ return ELINK_STATUS_ERROR;
+}
+
+static uint8_t elink_get_warpcore_lane(__rte_unused struct elink_phy *phy,
+ struct elink_params *params)
{
uint8_t lane = 0;
struct bnx2x_softc *sc = params->sc;
@@ -2987,14 +4099,16 @@ static uint8_t elink_get_warpcore_lane(struct elink_params *params)
port = port ^ 1;
lane = (port << 1) + path;
- } else { /* Two port mode - no port swap */
+ } else { /* Two port mode - no port swap */
/* Figure out path swap value */
- path_swap_ovr = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP_OVWR);
+ path_swap_ovr =
+ REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP_OVWR);
if (path_swap_ovr & 0x1) {
path_swap = (path_swap_ovr & 0x2);
} else {
- path_swap = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP);
+ path_swap =
+ REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP);
}
if (path_swap)
path = path ^ 1;
@@ -3004,6 +4118,7 @@ static uint8_t elink_get_warpcore_lane(struct elink_params *params)
return lane;
}
+
static void elink_set_aer_mmd(struct elink_params *params,
struct elink_phy *phy)
{
@@ -3012,13 +4127,13 @@ static void elink_set_aer_mmd(struct elink_params *params,
struct bnx2x_softc *sc = params->sc;
ser_lane = ((params->lane_config &
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+ PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ?
- (phy->addr + ser_lane) : 0;
+ (phy->addr + ser_lane) : 0;
if (USES_WARPCORE(sc)) {
- aer_val = elink_get_warpcore_lane(params);
+ aer_val = elink_get_warpcore_lane(phy, params);
/* In Dual-lane mode, two lanes are joined together,
* so in order to configure them, the AER broadcast method is
* used here.
@@ -3051,7 +4166,7 @@ static void elink_set_serdes_access(struct bnx2x_softc *sc, uint8_t port)
DELAY(500);
REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f);
DELAY(500);
- /* Set Clause 45 */
+ /* Set Clause 45 */
REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_ST + port * 0x10, 0);
}
@@ -3059,7 +4174,7 @@ static void elink_serdes_deassert(struct bnx2x_softc *sc, uint8_t port)
{
uint32_t val;
- PMD_DRV_LOG(DEBUG, sc, "elink_serdes_deassert");
+ ELINK_DEBUG_P0(sc, "elink_serdes_deassert");
val = ELINK_SERDES_RESET_BITS << (port * 16);
@@ -3094,7 +4209,7 @@ static void elink_xgxs_deassert(struct elink_params *params)
struct bnx2x_softc *sc = params->sc;
uint8_t port;
uint32_t val;
- PMD_DRV_LOG(DEBUG, sc, "elink_xgxs_deassert");
+ ELINK_DEBUG_P0(sc, "elink_xgxs_deassert");
port = params->port;
val = ELINK_XGXS_RESET_BITS << (port * 16);
@@ -3109,8 +4224,9 @@ static void elink_xgxs_deassert(struct elink_params *params)
static void elink_calc_ieee_aneg_adv(struct elink_phy *phy,
struct elink_params *params,
- uint16_t * ieee_fc)
+ uint16_t *ieee_fc)
{
+ struct bnx2x_softc *sc = params->sc;
*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
/* Resolve pause mode and advertisement Please refer to Table
* 28B-3 of the 802.3ab-1999 spec
@@ -3120,12 +4236,12 @@ static void elink_calc_ieee_aneg_adv(struct elink_phy *phy,
case ELINK_FLOW_CTRL_AUTO:
switch (params->req_fc_auto_adv) {
case ELINK_FLOW_CTRL_BOTH:
+ case ELINK_FLOW_CTRL_RX:
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
break;
- case ELINK_FLOW_CTRL_RX:
case ELINK_FLOW_CTRL_TX:
*ieee_fc |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
break;
default:
break;
@@ -3145,16 +4261,18 @@ static void elink_calc_ieee_aneg_adv(struct elink_phy *phy,
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
break;
}
- PMD_DRV_LOG(DEBUG, params->sc, "ieee_fc = 0x%x", *ieee_fc);
+ ELINK_DEBUG_P1(sc, "ieee_fc = 0x%x", *ieee_fc);
}
-static void set_phy_vars(struct elink_params *params, struct elink_vars *vars)
+static void set_phy_vars(struct elink_params *params,
+ struct elink_vars *vars)
{
+ struct bnx2x_softc *sc = params->sc;
uint8_t actual_phy_idx, phy_index, link_cfg_idx;
uint8_t phy_config_swapped = params->multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
link_cfg_idx = ELINK_LINK_CONFIG_IDX(phy_index);
actual_phy_idx = phy_index;
if (phy_config_swapped) {
@@ -3164,26 +4282,26 @@ static void set_phy_vars(struct elink_params *params, struct elink_vars *vars)
actual_phy_idx = ELINK_EXT_PHY1;
}
params->phy[actual_phy_idx].req_flow_ctrl =
- params->req_flow_ctrl[link_cfg_idx];
+ params->req_flow_ctrl[link_cfg_idx];
params->phy[actual_phy_idx].req_line_speed =
- params->req_line_speed[link_cfg_idx];
+ params->req_line_speed[link_cfg_idx];
params->phy[actual_phy_idx].speed_cap_mask =
- params->speed_cap_mask[link_cfg_idx];
+ params->speed_cap_mask[link_cfg_idx];
params->phy[actual_phy_idx].req_duplex =
- params->req_duplex[link_cfg_idx];
+ params->req_duplex[link_cfg_idx];
if (params->req_line_speed[link_cfg_idx] ==
ELINK_SPEED_AUTO_NEG)
vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
- PMD_DRV_LOG(DEBUG, params->sc, "req_flow_ctrl %x, req_line_speed %x,"
- " speed_cap_mask %x",
- params->phy[actual_phy_idx].req_flow_ctrl,
- params->phy[actual_phy_idx].req_line_speed,
- params->phy[actual_phy_idx].speed_cap_mask);
+ ELINK_DEBUG_P3(sc, "req_flow_ctrl %x, req_line_speed %x,"
+ " speed_cap_mask %x",
+ params->phy[actual_phy_idx].req_flow_ctrl,
+ params->phy[actual_phy_idx].req_line_speed,
+ params->phy[actual_phy_idx].speed_cap_mask);
}
}
@@ -3201,38 +4319,57 @@ static void elink_ext_phy_set_pause(struct elink_params *params,
/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
}
if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
}
- PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize 0x%x", val);
+ ELINK_DEBUG_P1(sc, "Ext phy AN advertize 0x%x", val);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
}
-static void elink_pause_resolve(struct elink_vars *vars, uint32_t pause_result)
-{ /* LD LP */
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
+static void elink_pause_resolve(__rte_unused struct elink_phy *phy,
+ struct elink_params *params,
+ struct elink_vars *vars,
+ uint32_t pause_result)
+{
+ struct bnx2x_softc *sc = params->sc;
+ /* LD LP */
+ switch (pause_result) { /* ASYM P ASYM P */
+ case 0xb: /* 1 0 1 1 */
+ ELINK_DEBUG_P0(sc, "Flow Control: TX only");
vars->flow_ctrl = ELINK_FLOW_CTRL_TX;
break;
- case 0xe: /* 1 1 1 0 */
+ case 0xe: /* 1 1 1 0 */
+ ELINK_DEBUG_P0(sc, "Flow Control: RX only");
vars->flow_ctrl = ELINK_FLOW_CTRL_RX;
break;
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
+ case 0x5: /* 0 1 0 1 */
+ case 0x7: /* 0 1 1 1 */
+ case 0xd: /* 1 1 0 1 */
+ case 0xf: /* 1 1 1 1 */
+ /* If the user selected to advertise RX ONLY,
+ * although we advertised both, need to enable
+ * RX only.
+ */
+
+ if (params->req_fc_auto_adv == ELINK_FLOW_CTRL_BOTH) {
+ ELINK_DEBUG_P0(sc, "Flow Control: RX & TX");
vars->flow_ctrl = ELINK_FLOW_CTRL_BOTH;
+ } else {
+ ELINK_DEBUG_P0(sc, "Flow Control: RX only");
+ vars->flow_ctrl = ELINK_FLOW_CTRL_RX;
+ }
break;
-
default:
+ ELINK_DEBUG_P0(sc, "Flow Control: None");
+ vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
break;
}
if (pause_result & (1 << 0))
@@ -3246,22 +4383,23 @@ static void elink_ext_phy_update_adv_fc(struct elink_phy *phy,
struct elink_params *params,
struct elink_vars *vars)
{
- uint16_t ld_pause; /* local */
- uint16_t lp_pause; /* link partner */
+ uint16_t ld_pause; /* local */
+ uint16_t lp_pause; /* link partner */
uint16_t pause_result;
struct bnx2x_softc *sc = params->sc;
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE) {
elink_cl22_read(sc, phy, 0x4, &ld_pause);
elink_cl22_read(sc, phy, 0x5, &lp_pause);
- } else if (CHIP_IS_E3(sc) && ELINK_SINGLE_MEDIA_DIRECT(params)) {
- uint8_t lane = elink_get_warpcore_lane(params);
+ } else if (CHIP_IS_E3(sc) &&
+ ELINK_SINGLE_MEDIA_DIRECT(params)) {
+ uint8_t lane = elink_get_warpcore_lane(phy, params);
uint16_t gp_status, gp_mask;
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4,
&gp_status);
gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL |
MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) <<
- lane;
+ lane;
if ((gp_status & gp_mask) == gp_mask) {
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_ADV_PAUSE, &ld_pause);
@@ -3287,16 +4425,18 @@ static void elink_ext_phy_update_adv_fc(struct elink_phy *phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
}
- pause_result = (ld_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
- pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
- PMD_DRV_LOG(DEBUG, sc, "Ext PHY pause result 0x%x", pause_result);
- elink_pause_resolve(vars, pause_result);
+ pause_result = (ld_pause &
+ MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
+ pause_result |= (lp_pause &
+ MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
+ ELINK_DEBUG_P1(sc, "Ext PHY pause result 0x%x", pause_result);
+ elink_pause_resolve(phy, params, vars, pause_result);
}
static uint8_t elink_ext_phy_resolve_fc(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
uint8_t ret = 0;
vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
@@ -3314,7 +4454,6 @@ static uint8_t elink_ext_phy_resolve_fc(struct elink_phy *phy,
}
return ret;
}
-
/******************************************************************/
/* Warpcore section */
/******************************************************************/
@@ -3323,19 +4462,31 @@ static uint8_t elink_ext_phy_resolve_fc(struct elink_phy *phy,
* init configuration, and set/clear SGMII flag. Internal
* phy init is done purely in phy_init stage.
*/
-#define WC_TX_DRIVER(post2, idriver, ipre) \
+#define WC_TX_DRIVER(post2, idriver, ipre, ifir) \
((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \
(idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \
- (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))
+ (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET) | \
+ (ifir << MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET))
#define WC_TX_FIR(post, main, pre) \
((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \
(main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \
(pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET))
+static void elink_update_link_attr(struct elink_params *params,
+ uint32_t link_attr)
+{
+ struct bnx2x_softc *sc = params->sc;
+
+ if (SHMEM2_HAS(sc, link_attr_sync))
+ REG_WR(sc, params->shmem2_base +
+ offsetof(struct shmem2_region,
+ link_attr_sync[params->port]), link_attr);
+}
+
static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars)
+ __rte_unused struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t i;
@@ -3358,7 +4509,7 @@ static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620}
};
- PMD_DRV_LOG(DEBUG, sc, "Enabling 20G-KR2");
+ ELINK_DEBUG_P0(sc, "Enabling 20G-KR2");
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL49_USERB0_CTRL, (3 << 6));
@@ -3368,15 +4519,16 @@ static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy,
reg_set[i].val);
/* Start KR2 work-around timer which handles BNX2X8073 link-parner */
- vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE;
- elink_update_link_attr(params, vars->link_attr_sync);
+ params->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE;
+ elink_update_link_attr(params, params->link_attr_sync);
}
static void elink_disable_kr2(struct elink_params *params,
- struct elink_vars *vars, struct elink_phy *phy)
+ struct elink_vars *vars,
+ struct elink_phy *phy)
{
struct bnx2x_softc *sc = params->sc;
- uint32_t i;
+ int i;
static struct elink_reg_set reg_set[] = {
/* Step 1 - Program the TX/RX alignment markers */
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690},
@@ -3395,13 +4547,13 @@ static void elink_disable_kr2(struct elink_params *params,
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000}
};
- PMD_DRV_LOG(DEBUG, sc, "Disabling 20G-KR2");
+ ELINK_DEBUG_P0(sc, "Disabling 20G-KR2");
- for (i = 0; i < ARRAY_SIZE(reg_set); i++)
+ for (i = 0; i < (int)ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
- elink_update_link_attr(params, vars->link_attr_sync);
+ params->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
+ elink_update_link_attr(params, params->link_attr_sync);
vars->check_kr2_recovery_cnt = ELINK_CHECK_KR2_RECOVERY_CNT;
}
@@ -3411,7 +4563,7 @@ static void elink_warpcore_set_lpi_passthrough(struct elink_phy *phy,
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "Configure WC for LPI pass through");
+ ELINK_DEBUG_P0(sc, "Configure WC for LPI pass through");
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c);
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
@@ -3423,7 +4575,7 @@ static void elink_warpcore_restart_AN_KR(struct elink_phy *phy,
{
/* Restart autoneg on the leading lane only */
struct bnx2x_softc *sc = params->sc;
- uint16_t lane = elink_get_warpcore_lane(params);
+ uint16_t lane = elink_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
@@ -3435,9 +4587,9 @@ static void elink_warpcore_restart_AN_KR(struct elink_phy *phy,
static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars)
-{
- uint16_t lane, i, cl72_ctrl, an_adv = 0;
+ struct elink_vars *vars) {
+ uint16_t lane, i, cl72_ctrl, an_adv = 0, val;
+ uint32_t wc_lane_config;
struct bnx2x_softc *sc = params->sc;
static struct elink_reg_set reg_set[] = {
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
@@ -3449,7 +4601,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
{MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
- PMD_DRV_LOG(DEBUG, sc, "Enable Auto Negotiation for KR");
+ ELINK_DEBUG_P0(sc, "Enable Auto Negotiation for KR");
/* Set to default registers that may be overridden by 10G force */
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
@@ -3471,11 +4623,11 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
/* Enable CL37 1G Parallel Detect */
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, addr, 0x1);
- PMD_DRV_LOG(DEBUG, sc, "Advertize 1G");
+ ELINK_DEBUG_P0(sc, "Advertize 1G");
}
if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
- (vars->line_speed == ELINK_SPEED_10000)) {
+ (vars->line_speed == ELINK_SPEED_10000)) {
/* Check adding advertisement for 10G KR */
an_adv |= (1 << 7);
/* Enable 10G Parallel Detect */
@@ -3485,23 +4637,25 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
elink_set_aer_mmd(params, phy);
- PMD_DRV_LOG(DEBUG, sc, "Advertize 10G");
+ ELINK_DEBUG_P0(sc, "Advertize 10G");
}
/* Set Transmit PMD settings */
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane,
- WC_TX_DRIVER(0x02, 0x06, 0x09));
+ WC_TX_DRIVER(0x02, 0x06, 0x09, 0));
/* Configure the next lane if dual mode */
if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * (lane + 1),
- WC_TX_DRIVER(0x02, 0x06, 0x09));
+ WC_TX_DRIVER(0x02, 0x06, 0x09, 0));
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, 0x03f0);
+ MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL,
+ 0x03f0);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, 0x03f0);
+ MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL,
+ 0x03f0);
/* Advertised speeds */
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
@@ -3515,14 +4669,13 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
/* Enable CL37 BAM */
if (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- default_cfg)) &
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL,
1);
- PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR");
+ ELINK_DEBUG_P0(sc, "Enable CL37 BAM on KR");
}
/* Advertise pause */
@@ -3533,7 +4686,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
/* Over 1G - AN local device user page 1 */
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
+ MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
@@ -3544,7 +4697,8 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_RX1_PCI_CTRL +
- (0x10 * lane), (1 << 11));
+ (0x10 * lane),
+ (1 << 11));
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7);
@@ -3552,6 +4706,31 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
elink_warpcore_enable_AN_KR2(phy, params, vars);
} else {
+ /* Enable Auto-Detect to support 1G over CL37 as well */
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10);
+ wc_lane_config = REG_RD(sc, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ shared_hw_config.wc_lane_config));
+ elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val);
+ /* Force cl48 sync_status LOW to avoid getting stuck in CL73
+ * parallel-detect loop when CL73 and CL37 are enabled.
+ */
+ val |= 1 << 11;
+
+ /* Restore Polarity settings in case it was run over by
+ * previous link owner
+ */
+ if (wc_lane_config &
+ (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane))
+ val |= 3 << 2;
+ else
+ val &= ~(3 << 2);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4),
+ val);
+
elink_disable_kr2(params, vars, phy);
}
@@ -3560,7 +4739,8 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
}
static void elink_warpcore_set_10G_KR(struct elink_phy *phy,
- struct elink_params *params)
+ struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val16, i, lane;
@@ -3568,7 +4748,7 @@ static void elink_warpcore_set_10G_KR(struct elink_phy *phy,
/* Disable Autoneg */
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x3f00},
+ 0x3f00},
{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
@@ -3581,7 +4761,7 @@ static void elink_warpcore_set_10G_KR(struct elink_phy *phy,
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
/* Global registers */
CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, 0);
@@ -3611,7 +4791,8 @@ static void elink_warpcore_set_10G_KR(struct elink_phy *phy,
MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30);
/* Turn TX scramble payload only the 64/66 scrambler */
- elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_TX66_CONTROL, 0x9);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_TX66_CONTROL, 0x9);
/* Turn RX scramble payload only the 64/66 scrambler */
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
@@ -3632,7 +4813,7 @@ static void elink_warpcore_set_10G_XFI(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t misc1_val, tap_val, tx_driver_val, lane, val;
uint32_t cfg_tap_val, tx_drv_brdct, tx_equal;
-
+ uint32_t ifir_val, ipost2_val, ipre_driver_val;
/* Hold rxSeqStart */
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000);
@@ -3677,38 +4858,59 @@ static void elink_warpcore_set_10G_XFI(struct elink_phy *phy,
if (is_xfi) {
misc1_val |= 0x5;
tap_val = WC_TX_FIR(0x08, 0x37, 0x00);
- tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03);
+ tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03, 0);
} else {
cfg_tap_val = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->
- port].sfi_tap_values));
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].
+ sfi_tap_values));
tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK;
- tx_drv_brdct = (cfg_tap_val &
- PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >>
- PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT;
-
misc1_val |= 0x9;
/* TAP values are controlled by nvram, if value there isn't 0 */
if (tx_equal)
- tap_val = (uint16_t) tx_equal;
+ tap_val = (uint16_t)tx_equal;
else
tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02);
- if (tx_drv_brdct)
- tx_driver_val =
- WC_TX_DRIVER(0x03, (uint16_t) tx_drv_brdct, 0x06);
- else
- tx_driver_val = WC_TX_DRIVER(0x03, 0x02, 0x06);
+ ifir_val = DEFAULT_TX_DRV_IFIR;
+ ipost2_val = DEFAULT_TX_DRV_POST2;
+ ipre_driver_val = DEFAULT_TX_DRV_IPRE_DRIVER;
+ tx_drv_brdct = DEFAULT_TX_DRV_BRDCT;
+
+ /* If any of the IFIR/IPRE_DRIVER/POST@ is set, apply all
+ * configuration.
+ */
+ if (cfg_tap_val & (PORT_HW_CFG_TX_DRV_IFIR_MASK |
+ PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK |
+ PORT_HW_CFG_TX_DRV_POST2_MASK)) {
+ ifir_val = (cfg_tap_val &
+ PORT_HW_CFG_TX_DRV_IFIR_MASK) >>
+ PORT_HW_CFG_TX_DRV_IFIR_SHIFT;
+ ipre_driver_val = (cfg_tap_val &
+ PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK)
+ >> PORT_HW_CFG_TX_DRV_IPREDRIVER_SHIFT;
+ ipost2_val = (cfg_tap_val &
+ PORT_HW_CFG_TX_DRV_POST2_MASK) >>
+ PORT_HW_CFG_TX_DRV_POST2_SHIFT;
+ }
+
+ if (cfg_tap_val & PORT_HW_CFG_TX_DRV_BROADCAST_MASK) {
+ tx_drv_brdct = (cfg_tap_val &
+ PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >>
+ PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT;
+ }
+
+ tx_driver_val = WC_TX_DRIVER(ipost2_val, tx_drv_brdct,
+ ipre_driver_val, ifir_val);
}
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val);
/* Set Transmit PMD settings */
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX_FIR_TAP,
tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE);
@@ -3756,7 +4958,8 @@ static void elink_warpcore_set_20G_force_KR2(struct elink_phy *phy,
elink_cl45_read_and_write(sc, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_KR_CONTROL, ~(1 << 1));
- elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0);
+ elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_CTRL, 0);
/* Turn off CL73 */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL73_USERB0_CTRL, &val);
@@ -3792,7 +4995,8 @@ static void elink_warpcore_set_20G_force_KR2(struct elink_phy *phy,
}
static void elink_warpcore_set_20G_DXGXS(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint16_t lane)
+ struct elink_phy *phy,
+ uint16_t lane)
{
/* Rx0 anaRxControl1G */
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
@@ -3802,13 +5006,17 @@ static void elink_warpcore_set_20G_DXGXS(struct bnx2x_softc *sc,
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90);
- elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW0, 0xE070);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX66_SCW0, 0xE070);
- elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW1, 0xC0D0);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX66_SCW1, 0xC0D0);
- elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW2, 0xA0B0);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX66_SCW2, 0xA0B0);
- elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW3, 0x8090);
+ elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX66_SCW3, 0x8090);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0);
@@ -3837,7 +5045,7 @@ static void elink_warpcore_set_20G_DXGXS(struct bnx2x_softc *sc,
MDIO_WC_REG_TX_FIR_TAP_ENABLE));
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane,
- WC_TX_DRIVER(0x02, 0x02, 0x02));
+ WC_TX_DRIVER(0x02, 0x02, 0x02, 0));
}
static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
@@ -3859,7 +5067,7 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
0x1000);
- PMD_DRV_LOG(DEBUG, sc, "set SGMII AUTONEG");
+ ELINK_DEBUG_P0(sc, "set SGMII AUTONEG");
} else {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
@@ -3874,9 +5082,8 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
val16 |= 0x0040;
break;
default:
- PMD_DRV_LOG(DEBUG, sc,
- "Speed not supported: 0x%x",
- phy->req_line_speed);
+ ELINK_DEBUG_P1(sc,
+ "Speed not supported: 0x%x", phy->req_line_speed);
return;
}
@@ -3884,13 +5091,13 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
val16 |= 0x0100;
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16);
+ MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16);
- PMD_DRV_LOG(DEBUG, sc, "set SGMII force speed %d",
- phy->req_line_speed);
+ ELINK_DEBUG_P1(sc, "set SGMII force speed %d",
+ phy->req_line_speed);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
- PMD_DRV_LOG(DEBUG, sc, " (readback) %x", val16);
+ ELINK_DEBUG_P1(sc, " (readback) %x", val16);
}
/* SGMII Slave mode and disable signal detect */
@@ -3902,28 +5109,31 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
digctrl_kx1 &= 0xff4a;
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, digctrl_kx1);
+ MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
+ digctrl_kx1);
/* Turn off parallel detect */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
- (digctrl_kx2 & ~(1 << 2)));
+ MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
+ (digctrl_kx2 & ~(1 << 2)));
/* Re-enable parallel detect */
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
- (digctrl_kx2 | (1 << 2)));
+ MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
+ (digctrl_kx2 | (1 << 2)));
/* Enable autodet */
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
- (digctrl_kx1 | 0x10));
+ MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
+ (digctrl_kx1 | 0x10));
}
+
static void elink_warpcore_reset_lane(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t reset)
+ struct elink_phy *phy,
+ uint8_t reset)
{
uint16_t val;
/* Take lane out of reset after configuration is finished */
@@ -3936,7 +5146,7 @@ static void elink_warpcore_reset_lane(struct bnx2x_softc *sc,
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC6, val);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_DIGITAL5_MISC6, &val);
+ MDIO_WC_REG_DIGITAL5_MISC6, &val);
}
/* Clear SFI/XFI link settings registers */
@@ -3952,11 +5162,11 @@ static void elink_warpcore_clear_regs(struct elink_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL3, 0x0800},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL4_MISC3, 0x8008},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
- 0x0195},
+ 0x0195},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
- 0x0007},
+ 0x0007},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3,
- 0x0002},
+ 0x0002},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000},
{MDIO_WC_DEVAD, MDIO_WC_REG_TX_FIR_TAP, 0x0000},
{MDIO_WC_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040},
@@ -3970,28 +5180,28 @@ static void elink_warpcore_clear_regs(struct elink_phy *phy,
elink_cl45_write(sc, phy, wc_regs[i].devad, wc_regs[i].reg,
wc_regs[i].val);
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, 0x0990);
}
static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc,
+ __rte_unused uint32_t chip_id,
uint32_t shmem_base,
uint8_t port,
- uint8_t * gpio_num,
- uint8_t * gpio_port)
+ uint8_t *gpio_num,
+ uint8_t *gpio_port)
{
uint32_t cfg_pin;
*gpio_num = 0;
*gpio_port = 0;
if (CHIP_IS_E3(sc)) {
cfg_pin = (REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_MOD_ABS_MASK) >>
- PORT_HW_CFG_E3_MOD_ABS_SHIFT;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_MOD_ABS_MASK) >>
+ PORT_HW_CFG_E3_MOD_ABS_SHIFT;
/* Should not happen. This function called upon interrupt
* triggered by GPIO ( since EPIO can only generate interrupts
@@ -4001,9 +5211,9 @@ static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc,
*/
if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
(cfg_pin > PIN_CFG_GPIO3_P1)) {
- PMD_DRV_LOG(DEBUG, sc,
- "No cfg pin %x for module detect indication",
- cfg_pin);
+ ELINK_DEBUG_P1(sc,
+ "No cfg pin %x for module detect indication",
+ cfg_pin);
return ELINK_STATUS_ERROR;
}
@@ -4017,12 +5227,13 @@ static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc,
return ELINK_STATUS_OK;
}
-static int elink_is_sfp_module_plugged(struct elink_params *params)
+static int elink_is_sfp_module_plugged(__rte_unused struct elink_phy *phy,
+ struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
uint8_t gpio_num, gpio_port;
uint32_t gpio_val;
- if (elink_get_mod_abs_int_cfg(sc,
+ if (elink_get_mod_abs_int_cfg(sc, params->chip_id,
params->shmem_base, params->port,
&gpio_num, &gpio_port) != ELINK_STATUS_OK)
return 0;
@@ -4034,17 +5245,16 @@ static int elink_is_sfp_module_plugged(struct elink_params *params)
else
return 0;
}
-
static int elink_warpcore_get_sigdet(struct elink_phy *phy,
struct elink_params *params)
{
uint16_t gp2_status_reg0, lane;
struct bnx2x_softc *sc = params->sc;
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_0,
- &gp2_status_reg0);
+ &gp2_status_reg0);
return (gp2_status_reg0 >> (8 + lane)) & 0x1;
}
@@ -4063,38 +5273,35 @@ static void elink_warpcore_config_runtime(struct elink_phy *phy,
return;
if (vars->rx_tx_asic_rst) {
- uint16_t lane = elink_get_warpcore_lane(params);
+ uint16_t lane = elink_get_warpcore_lane(phy, params);
serdes_net_if = (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config
- [params->port].
- default_cfg)) &
- PORT_HW_CFG_NET_SERDES_IF_MASK);
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
+ PORT_HW_CFG_NET_SERDES_IF_MASK);
switch (serdes_net_if) {
case PORT_HW_CFG_NET_SERDES_IF_KR:
/* Do we get link yet? */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 0x81d1,
&gp_status1);
- lnkup = (gp_status1 >> (8 + lane)) & 0x1; /* 1G */
- /*10G KR */
+ lnkup = (gp_status1 >> (8 + lane)) & 0x1;/* 1G */
+ /*10G KR*/
lnkup_kr = (gp_status1 >> (12 + lane)) & 0x1;
if (lnkup_kr || lnkup) {
vars->rx_tx_asic_rst = 0;
} else {
- /* Reset the lane to see if link comes up. */
+ /* Reset the lane to see if link comes up.*/
elink_warpcore_reset_lane(sc, phy, 1);
elink_warpcore_reset_lane(sc, phy, 0);
/* Restart Autoneg */
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_IEEE0BLK_MIICNTL,
- 0x1200);
+ MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
vars->rx_tx_asic_rst--;
- PMD_DRV_LOG(DEBUG, sc, "0x%x retry left",
- vars->rx_tx_asic_rst);
+ ELINK_DEBUG_P1(sc, "0x%x retry left",
+ vars->rx_tx_asic_rst);
}
break;
@@ -4102,29 +5309,29 @@ static void elink_warpcore_config_runtime(struct elink_phy *phy,
break;
}
- }
- /*params->rx_tx_asic_rst */
+ } /*params->rx_tx_asic_rst*/
}
static void elink_warpcore_config_sfi(struct elink_phy *phy,
struct elink_params *params)
{
- uint16_t lane = elink_get_warpcore_lane(params);
-
+ uint16_t lane = elink_get_warpcore_lane(phy, params);
+ struct bnx2x_softc *sc = params->sc;
elink_warpcore_clear_regs(phy, params, lane);
if ((params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)] ==
ELINK_SPEED_10000) &&
(phy->media_type != ELINK_ETH_PHY_SFP_1G_FIBER)) {
- PMD_DRV_LOG(DEBUG, params->sc, "Setting 10G SFI");
+ ELINK_DEBUG_P0(sc, "Setting 10G SFI");
elink_warpcore_set_10G_XFI(phy, params, 0);
} else {
- PMD_DRV_LOG(DEBUG, params->sc, "Setting 1G Fiber");
+ ELINK_DEBUG_P0(sc, "Setting 1G Fiber");
elink_warpcore_set_sgmii_speed(phy, params, 1, 0);
}
}
static void elink_sfp_e3_set_transmitter(struct elink_params *params,
- struct elink_phy *phy, uint8_t tx_en)
+ struct elink_phy *phy,
+ uint8_t tx_en)
{
struct bnx2x_softc *sc = params->sc;
uint32_t cfg_pin;
@@ -4133,9 +5340,9 @@ static void elink_sfp_e3_set_transmitter(struct elink_params *params,
cfg_pin = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
dev_info.port_hw_config[port].e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_TX_LASER_MASK;
+ PORT_HW_CFG_E3_TX_LASER_MASK;
/* Set the !tx_en since this pin is DISABLE_TX_LASER */
- PMD_DRV_LOG(DEBUG, sc, "Setting WC TX to %d", tx_en);
+ ELINK_DEBUG_P1(sc, "Setting WC TX to %d", tx_en);
/* For 20G, the expected pin to be used is 3 pins after the current */
elink_set_cfg_pin(sc, cfg_pin, tx_en ^ 1);
@@ -4144,21 +5351,20 @@ static void elink_sfp_e3_set_transmitter(struct elink_params *params,
}
static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint32_t serdes_net_if;
uint8_t fiber_mode;
- uint16_t lane = elink_get_warpcore_lane(params);
+ uint16_t lane = elink_get_warpcore_lane(phy, params);
serdes_net_if = (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- default_cfg)) &
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
PORT_HW_CFG_NET_SERDES_IF_MASK);
- PMD_DRV_LOG(DEBUG, sc,
- "Begin Warpcore init, link_speed %d, "
- "serdes_net_if = 0x%x", vars->line_speed, serdes_net_if);
+ ELINK_DEBUG_P2(sc, "Begin Warpcore init, link_speed %d, "
+ "serdes_net_if = 0x%x",
+ vars->line_speed, serdes_net_if);
elink_set_aer_mmd(params, phy);
elink_warpcore_reset_lane(sc, phy, 1);
vars->phy_flags |= PHY_XGXS_FLAG;
@@ -4167,7 +5373,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
((phy->req_line_speed == ELINK_SPEED_100) ||
(phy->req_line_speed == ELINK_SPEED_10)))) {
vars->phy_flags |= PHY_SGMII_FLAG;
- PMD_DRV_LOG(DEBUG, sc, "Setting SGMII mode");
+ ELINK_DEBUG_P0(sc, "Setting SGMII mode");
elink_warpcore_clear_regs(phy, params, lane);
elink_warpcore_set_sgmii_speed(phy, params, 0, 1);
} else {
@@ -4177,27 +5383,28 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
if (params->loopback_mode != ELINK_LOOPBACK_EXT)
elink_warpcore_enable_AN_KR(phy, params, vars);
else {
- PMD_DRV_LOG(DEBUG, sc, "Setting KR 10G-Force");
- elink_warpcore_set_10G_KR(phy, params);
+ ELINK_DEBUG_P0(sc, "Setting KR 10G-Force");
+ elink_warpcore_set_10G_KR(phy, params, vars);
}
break;
case PORT_HW_CFG_NET_SERDES_IF_XFI:
elink_warpcore_clear_regs(phy, params, lane);
if (vars->line_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG, sc, "Setting 10G XFI");
+ ELINK_DEBUG_P0(sc, "Setting 10G XFI");
elink_warpcore_set_10G_XFI(phy, params, 1);
} else {
if (ELINK_SINGLE_MEDIA_DIRECT(params)) {
- PMD_DRV_LOG(DEBUG, sc, "1G Fiber");
+ ELINK_DEBUG_P0(sc, "1G Fiber");
fiber_mode = 1;
} else {
- PMD_DRV_LOG(DEBUG, sc, "10/100/1G SGMII");
+ ELINK_DEBUG_P0(sc, "10/100/1G SGMII");
fiber_mode = 0;
}
elink_warpcore_set_sgmii_speed(phy,
- params,
- fiber_mode, 0);
+ params,
+ fiber_mode,
+ 0);
}
break;
@@ -4209,7 +5416,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
*/
if ((params->loopback_mode == ELINK_LOOPBACK_NONE) ||
(params->loopback_mode == ELINK_LOOPBACK_EXT)) {
- if (elink_is_sfp_module_plugged(params))
+ if (elink_is_sfp_module_plugged(phy, params))
elink_sfp_module_detection(phy, params);
else
elink_sfp_e3_set_transmitter(params,
@@ -4221,10 +5428,10 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
case PORT_HW_CFG_NET_SERDES_IF_DXGXS:
if (vars->line_speed != ELINK_SPEED_20000) {
- PMD_DRV_LOG(DEBUG, sc, "Speed not supported yet");
+ ELINK_DEBUG_P0(sc, "Speed not supported yet");
return 0;
}
- PMD_DRV_LOG(DEBUG, sc, "Setting 20G DXGXS");
+ ELINK_DEBUG_P0(sc, "Setting 20G DXGXS");
elink_warpcore_set_20G_DXGXS(sc, phy, lane);
/* Issue Module detection */
@@ -4234,21 +5441,21 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
if (!params->loopback_mode) {
elink_warpcore_enable_AN_KR(phy, params, vars);
} else {
- PMD_DRV_LOG(DEBUG, sc, "Setting KR 20G-Force");
+ ELINK_DEBUG_P0(sc, "Setting KR 20G-Force");
elink_warpcore_set_20G_force_KR2(phy, params);
}
break;
default:
- PMD_DRV_LOG(DEBUG, sc,
- "Unsupported Serdes Net Interface 0x%x",
- serdes_net_if);
+ ELINK_DEBUG_P1(sc,
+ "Unsupported Serdes Net Interface 0x%x",
+ serdes_net_if);
return 0;
}
}
/* Take lane out of reset after configuration is finished */
elink_warpcore_reset_lane(sc, phy, 0);
- PMD_DRV_LOG(DEBUG, sc, "Exit config init");
+ ELINK_DEBUG_P0(sc, "Exit config init");
return 0;
}
@@ -4277,11 +5484,12 @@ static void elink_warpcore_link_reset(struct elink_phy *phy,
MDIO_AER_BLOCK_AER_REG, 0);
/* Enable 1G MDIO (1-copy) */
elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~0x10);
+ MDIO_WC_REG_XGXSBLK0_XGXSCONTROL,
+ ~0x10);
elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2, 0xff00);
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
/* Disable CL36 PCS Tx */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
@@ -4313,8 +5521,8 @@ static void elink_set_warpcore_loopback(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t val16;
uint32_t lane;
- PMD_DRV_LOG(DEBUG, sc, "Setting Warpcore loopback type %x, speed %d",
- params->loopback_mode, phy->req_line_speed);
+ ELINK_DEBUG_P2(sc, "Setting Warpcore loopback type %x, speed %d",
+ params->loopback_mode, phy->req_line_speed);
if (phy->req_line_speed < ELINK_SPEED_10000 ||
phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) {
@@ -4328,14 +5536,15 @@ static void elink_set_warpcore_loopback(struct elink_phy *phy,
MDIO_WC_REG_XGXSBLK0_XGXSCONTROL,
0x10);
/* Set 1G loopback based on lane (1-copy) */
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16);
val16 |= (1 << lane);
if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
val16 |= (2 << lane);
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16);
+ MDIO_WC_REG_XGXSBLK1_LANECTRL2,
+ val16);
/* Switch back to 4-copy registers */
elink_set_aer_mmd(params, phy);
@@ -4349,8 +5558,10 @@ static void elink_set_warpcore_loopback(struct elink_phy *phy,
}
}
+
+
static void elink_sync_link(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t link_10g_plus;
@@ -4358,21 +5569,23 @@ static void elink_sync_link(struct elink_params *params,
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
if (vars->link_up) {
- PMD_DRV_LOG(DEBUG, sc, "phy link up");
+ ELINK_DEBUG_P0(sc, "phy link up");
+ ELINK_DEBUG_P1(sc, "link status = %x", vars->link_status);
vars->phy_link_up = 1;
vars->duplex = DUPLEX_FULL;
- switch (vars->link_status & LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
+ switch (vars->link_status &
+ LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
case ELINK_LINK_10THD:
vars->duplex = DUPLEX_HALF;
- /* Fall through */
+ /* Fall thru */
case ELINK_LINK_10TFD:
vars->line_speed = ELINK_SPEED_10;
break;
case ELINK_LINK_100TXHD:
vars->duplex = DUPLEX_HALF;
- /* Fall through */
+ /* Fall thru */
case ELINK_LINK_100T4:
case ELINK_LINK_100TXFD:
vars->line_speed = ELINK_SPEED_100;
@@ -4380,14 +5593,14 @@ static void elink_sync_link(struct elink_params *params,
case ELINK_LINK_1000THD:
vars->duplex = DUPLEX_HALF;
- /* Fall through */
+ /* Fall thru */
case ELINK_LINK_1000TFD:
vars->line_speed = ELINK_SPEED_1000;
break;
case ELINK_LINK_2500THD:
vars->duplex = DUPLEX_HALF;
- /* Fall through */
+ /* Fall thru */
case ELINK_LINK_2500TFD:
vars->line_speed = ELINK_SPEED_2500;
break;
@@ -4419,7 +5632,8 @@ static void elink_sync_link(struct elink_params *params,
vars->phy_flags &= ~PHY_SGMII_FLAG;
}
if (vars->line_speed &&
- USES_WARPCORE(sc) && (vars->line_speed == ELINK_SPEED_1000))
+ USES_WARPCORE(sc) &&
+ (vars->line_speed == ELINK_SPEED_1000))
vars->phy_flags |= PHY_SGMII_FLAG;
/* Anything 10 and over uses the bmac */
link_10g_plus = (vars->line_speed >= ELINK_SPEED_10000);
@@ -4435,8 +5649,8 @@ static void elink_sync_link(struct elink_params *params,
else
vars->mac_type = ELINK_MAC_TYPE_EMAC;
}
- } else { /* Link down */
- PMD_DRV_LOG(DEBUG, sc, "phy link down");
+ } else { /* Link down */
+ ELINK_DEBUG_P0(sc, "phy link down");
vars->phy_link_up = 0;
@@ -4480,44 +5694,44 @@ void elink_link_status_update(struct elink_params *params,
elink_sync_link(params, vars);
/* Sync media type */
sync_offset = params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].media_type);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].media_type);
media_types = REG_RD(sc, sync_offset);
params->phy[ELINK_INT_PHY].media_type =
- (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >>
- PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT;
+ (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >>
+ PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT;
params->phy[ELINK_EXT_PHY1].media_type =
- (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >>
- PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT;
+ (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >>
+ PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT;
params->phy[ELINK_EXT_PHY2].media_type =
- (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >>
- PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
- PMD_DRV_LOG(DEBUG, sc, "media_types = 0x%x", media_types);
+ (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >>
+ PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
+ ELINK_DEBUG_P1(sc, "media_types = 0x%x", media_types);
/* Sync AEU offset */
sync_offset = params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].aeu_int_mask);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].aeu_int_mask);
vars->aeu_int_mask = REG_RD(sc, sync_offset);
/* Sync PFC status */
if (vars->link_status & LINK_STATUS_PFC_ENABLED)
params->feature_config_flags |=
- ELINK_FEATURE_CONFIG_PFC_ENABLED;
+ ELINK_FEATURE_CONFIG_PFC_ENABLED;
else
params->feature_config_flags &=
- ~ELINK_FEATURE_CONFIG_PFC_ENABLED;
+ ~ELINK_FEATURE_CONFIG_PFC_ENABLED;
if (SHMEM2_HAS(sc, link_attr_sync))
- vars->link_attr_sync = SHMEM2_RD(sc,
+ params->link_attr_sync = SHMEM2_RD(sc,
link_attr_sync[params->port]);
- PMD_DRV_LOG(DEBUG, sc, "link_status 0x%x phy_link_up %x int_mask 0x%x",
- vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
- PMD_DRV_LOG(DEBUG, sc, "line_speed %x duplex %x flow_ctrl 0x%x",
- vars->line_speed, vars->duplex, vars->flow_ctrl);
+ ELINK_DEBUG_P3(sc, "link_status 0x%x phy_link_up %x int_mask 0x%x",
+ vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
+ ELINK_DEBUG_P3(sc, "line_speed %x duplex %x flow_ctrl 0x%x",
+ vars->line_speed, vars->duplex, vars->flow_ctrl);
}
static void elink_set_master_ln(struct elink_params *params,
@@ -4532,7 +5746,8 @@ static void elink_set_master_ln(struct elink_params *params,
/* Set the master_ln for AN */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_XGXS_BLOCK2,
- MDIO_XGXS_BLOCK2_TEST_MODE_LANE, &new_master_ln);
+ MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
+ &new_master_ln);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_XGXS_BLOCK2,
@@ -4541,8 +5756,8 @@ static void elink_set_master_ln(struct elink_params *params,
}
static elink_status_t elink_reset_unicore(struct elink_params *params,
- struct elink_phy *phy,
- uint8_t set_serdes)
+ struct elink_phy *phy,
+ uint8_t set_serdes)
{
struct bnx2x_softc *sc = params->sc;
uint16_t mii_control;
@@ -4555,7 +5770,8 @@ static elink_status_t elink_reset_unicore(struct elink_params *params,
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET));
+ (mii_control |
+ MDIO_COMBO_IEEO_MII_CONTROL_RESET));
if (set_serdes)
elink_set_serdes_access(sc, params->port);
@@ -4566,7 +5782,8 @@ static elink_status_t elink_reset_unicore(struct elink_params *params,
/* The reset erased the previous bank value */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ &mii_control);
if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
DELAY(5);
@@ -4574,10 +5791,12 @@ static elink_status_t elink_reset_unicore(struct elink_params *params,
}
}
- elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized,"
- // " Port %d",
+ elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port);
+ /* "Warning: PHY was not initialized,"
+ * " Port %d",
+ */
- PMD_DRV_LOG(DEBUG, sc, "BUG! XGXS is still in reset!");
+ ELINK_DEBUG_P0(sc, "BUG! XGXS is still in reset!");
return ELINK_STATUS_ERROR;
}
@@ -4631,31 +5850,35 @@ static void elink_set_parallel_detection(struct elink_phy *phy,
uint16_t control2;
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, &control2);
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
+ &control2);
if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
else
control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- PMD_DRV_LOG(DEBUG, sc, "phy->speed_cap_mask = 0x%x, control2 = 0x%x",
- phy->speed_cap_mask, control2);
+ ELINK_DEBUG_P2(sc, "phy->speed_cap_mask = 0x%x, control2 = 0x%x",
+ phy->speed_cap_mask, control2);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, control2);
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
+ control2);
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
- (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, sc, "XGXS");
+ (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+ ELINK_DEBUG_P0(sc, "XGXS");
CL22_WR_OVER_CL45(sc, phy,
- MDIO_REG_BANK_10G_PARALLEL_DETECT,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
+ MDIO_REG_BANK_10G_PARALLEL_DETECT,
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_10G_PARALLEL_DETECT,
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
&control2);
+
control2 |=
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
@@ -4675,7 +5898,8 @@ static void elink_set_parallel_detection(struct elink_phy *phy,
static void elink_set_autoneg(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars, uint8_t enable_cl73)
+ struct elink_vars *vars,
+ uint8_t enable_cl73)
{
struct bnx2x_softc *sc = params->sc;
uint16_t reg_val;
@@ -4688,7 +5912,7 @@ static void elink_set_autoneg(struct elink_phy *phy,
/* CL37 Autoneg Enabled */
if (vars->line_speed == ELINK_SPEED_AUTO_NEG)
reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
- else /* CL37 Autoneg Disabled */
+ else /* CL37 Autoneg Disabled */
reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
@@ -4702,7 +5926,7 @@ static void elink_set_autoneg(struct elink_phy *phy,
MDIO_REG_BANK_SERDES_DIGITAL,
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN |
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT);
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT);
reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE;
if (vars->line_speed == ELINK_SPEED_AUTO_NEG)
reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
@@ -4716,7 +5940,8 @@ static void elink_set_autoneg(struct elink_phy *phy,
/* Enable TetonII and BAM autoneg */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_BAM_NEXT_PAGE,
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, &reg_val);
+ MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
+ &reg_val);
if (vars->line_speed == ELINK_SPEED_AUTO_NEG) {
/* Enable BAM aneg Mode and TetonII aneg Mode */
reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
@@ -4728,40 +5953,45 @@ static void elink_set_autoneg(struct elink_phy *phy,
}
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_BAM_NEXT_PAGE,
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, reg_val);
+ MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
+ reg_val);
if (enable_cl73) {
/* Enable Cl73 FSM status bits */
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_USERB0,
- MDIO_CL73_USERB0_CL73_UCTRL, 0xe);
+ MDIO_CL73_USERB0_CL73_UCTRL,
+ 0xe);
- /* Enable BAM Station Manager */
+ /* Enable BAM Station Manager*/
CL22_WR_OVER_CL45(sc, phy,
- MDIO_REG_BANK_CL73_USERB0,
- MDIO_CL73_USERB0_CL73_BAM_CTRL1,
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN
- |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
+ MDIO_REG_BANK_CL73_USERB0,
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1,
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
/* Advertise CL73 link speeds */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB1,
- MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
- if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+ MDIO_CL73_IEEEB1_AN_ADV2,
+ &reg_val);
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
- if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB1,
- MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
+ MDIO_CL73_IEEEB1_AN_ADV2,
+ reg_val);
/* CL73 Autoneg Enabled */
reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
- } else /* CL73 Autoneg Disabled */
+ } else /* CL73 Autoneg Disabled */
reg_val = 0;
CL22_WR_OVER_CL45(sc, phy,
@@ -4777,7 +6007,7 @@ static void elink_program_serdes(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t reg_val;
- /* Program duplex, disable autoneg and sgmii */
+ /* Program duplex, disable autoneg and sgmii*/
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
@@ -4797,7 +6027,7 @@ static void elink_program_serdes(struct elink_phy *phy,
MDIO_REG_BANK_SERDES_DIGITAL,
MDIO_SERDES_DIGITAL_MISC1, &reg_val);
/* Clearing the speed value before setting the right speed */
- PMD_DRV_LOG(DEBUG, sc, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val);
+ ELINK_DEBUG_P1(sc, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val);
reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
@@ -4810,7 +6040,7 @@ static void elink_program_serdes(struct elink_phy *phy,
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
if (vars->line_speed == ELINK_SPEED_10000)
reg_val |=
- MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
+ MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
}
CL22_WR_OVER_CL45(sc, phy,
@@ -4831,10 +6061,12 @@ static void elink_set_brcm_cl37_advertisement(struct elink_phy *phy,
if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
val |= MDIO_OVER_1G_UP1_10G;
CL22_WR_OVER_CL45(sc, phy,
- MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP1, val);
+ MDIO_REG_BANK_OVER_1G,
+ MDIO_OVER_1G_UP1, val);
CL22_WR_OVER_CL45(sc, phy,
- MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP3, 0x400);
+ MDIO_REG_BANK_OVER_1G,
+ MDIO_OVER_1G_UP3, 0x400);
}
static void elink_set_ieee_aneg_advertisement(struct elink_phy *phy,
@@ -4865,7 +6097,7 @@ static void elink_restart_autoneg(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t mii_control;
- PMD_DRV_LOG(DEBUG, sc, "elink_restart_autoneg");
+ ELINK_DEBUG_P0(sc, "elink_restart_autoneg");
/* Enable and restart BAM/CL37 aneg */
if (enable_cl73) {
@@ -4878,16 +6110,17 @@ static void elink_restart_autoneg(struct elink_phy *phy,
MDIO_REG_BANK_CL73_IEEEB0,
MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
(mii_control |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
} else {
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
- PMD_DRV_LOG(DEBUG, sc,
- "elink_restart_autoneg mii_control before = 0x%x",
- mii_control);
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ &mii_control);
+ ELINK_DEBUG_P1(sc,
+ "elink_restart_autoneg mii_control before = 0x%x",
+ mii_control);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL,
@@ -4908,7 +6141,8 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &control1);
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
+ &control1);
control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
/* Set sgmii mode (and not fiber) */
control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
@@ -4916,7 +6150,8 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, control1);
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
+ control1);
/* If forced speed */
if (!(vars->line_speed == ELINK_SPEED_AUTO_NEG)) {
@@ -4925,7 +6160,8 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ &mii_control);
mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK |
MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
@@ -4933,30 +6169,32 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
switch (vars->line_speed) {
case ELINK_SPEED_100:
mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
+ MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
break;
case ELINK_SPEED_1000:
mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
+ MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
break;
case ELINK_SPEED_10:
/* There is nothing to set for 10M */
break;
default:
/* Invalid speed for SGMII */
- PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x",
- vars->line_speed);
+ ELINK_DEBUG_P1(sc, "Invalid line_speed 0x%x",
+ vars->line_speed);
break;
}
/* Setting the full duplex */
if (phy->req_duplex == DUPLEX_FULL)
- mii_control |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
+ mii_control |=
+ MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL, mii_control);
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ mii_control);
- } else { /* AN mode */
+ } else { /* AN mode */
/* Enable and restart AN */
elink_restart_autoneg(phy, params, 0);
}
@@ -4965,8 +6203,7 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
/* Link management
*/
static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
- struct elink_params
- *params)
+ struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
uint16_t pd_10g, status2_1000x;
@@ -4974,34 +6211,38 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
return ELINK_STATUS_OK;
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x);
+ MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+ &status2_1000x);
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
- MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x);
+ MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+ &status2_1000x);
if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
- PMD_DRV_LOG(DEBUG, sc, "1G parallel detect link on port %d",
- params->port);
- return ELINK_STATUS_ERROR;
+ ELINK_DEBUG_P1(sc, "1G parallel detect link on port %d",
+ params->port);
+ return 1;
}
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_10G_PARALLEL_DETECT,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS,
+ &pd_10g);
if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
- PMD_DRV_LOG(DEBUG, sc, "10G parallel detect link on port %d",
- params->port);
- return ELINK_STATUS_ERROR;
+ ELINK_DEBUG_P1(sc, "10G parallel detect link on port %d",
+ params->port);
+ return 1;
}
return ELINK_STATUS_OK;
}
static void elink_update_adv_fc(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars, uint32_t gp_status)
+ struct elink_vars *vars,
+ uint32_t gp_status)
{
- uint16_t ld_pause; /* local driver */
- uint16_t lp_pause; /* link partner */
+ uint16_t ld_pause; /* local driver */
+ uint16_t lp_pause; /* link partner */
uint16_t pause_result;
struct bnx2x_softc *sc = params->sc;
if ((gp_status &
@@ -5012,37 +6253,42 @@ static void elink_update_adv_fc(struct elink_phy *phy,
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB1,
- MDIO_CL73_IEEEB1_AN_ADV1, &ld_pause);
+ MDIO_CL73_IEEEB1_AN_ADV1,
+ &ld_pause);
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB1,
- MDIO_CL73_IEEEB1_AN_LP_ADV1, &lp_pause);
+ MDIO_CL73_IEEEB1_AN_LP_ADV1,
+ &lp_pause);
pause_result = (ld_pause &
MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8;
pause_result |= (lp_pause &
MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10;
- PMD_DRV_LOG(DEBUG, sc, "pause_result CL73 0x%x", pause_result);
+ ELINK_DEBUG_P1(sc, "pause_result CL73 0x%x", pause_result);
} else {
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV, &ld_pause);
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
+ &ld_pause);
CL22_RD_OVER_CL45(sc, phy,
- MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
- &lp_pause);
+ MDIO_REG_BANK_COMBO_IEEE0,
+ MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
+ &lp_pause);
pause_result = (ld_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 5;
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 7;
- PMD_DRV_LOG(DEBUG, sc, "pause_result CL37 0x%x", pause_result);
+ ELINK_DEBUG_P1(sc, "pause_result CL37 0x%x", pause_result);
}
- elink_pause_resolve(vars, pause_result);
+ elink_pause_resolve(phy, params, vars, pause_result);
}
static void elink_flow_ctrl_resolve(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars, uint32_t gp_status)
+ struct elink_vars *vars,
+ uint32_t gp_status)
{
+ struct bnx2x_softc *sc = params->sc;
vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
/* Resolve from gp_status in case of AN complete and not sgmii */
@@ -5062,7 +6308,7 @@ static void elink_flow_ctrl_resolve(struct elink_phy *phy,
}
elink_update_adv_fc(phy, params, vars, gp_status);
}
- PMD_DRV_LOG(DEBUG, params->sc, "flow_ctrl 0x%x", vars->flow_ctrl);
+ ELINK_DEBUG_P1(sc, "flow_ctrl 0x%x", vars->flow_ctrl);
}
static void elink_check_fallback_to_cl37(struct elink_phy *phy,
@@ -5070,14 +6316,16 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
{
struct bnx2x_softc *sc = params->sc;
uint16_t rx_status, ustat_val, cl37_fsm_received;
- PMD_DRV_LOG(DEBUG, sc, "elink_check_fallback_to_cl37");
+ ELINK_DEBUG_P0(sc, "elink_check_fallback_to_cl37");
/* Step 1: Make sure signal is detected */
CL22_RD_OVER_CL45(sc, phy,
- MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status);
+ MDIO_REG_BANK_RX0,
+ MDIO_RX0_RX_STATUS,
+ &rx_status);
if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) !=
(MDIO_RX0_RX_STATUS_SIGDET)) {
- PMD_DRV_LOG(DEBUG, sc, "Signal is not detected. Restoring CL73."
- "rx_status(0x80b0) = 0x%x", rx_status);
+ ELINK_DEBUG_P1(sc, "Signal is not detected. Restoring CL73."
+ "rx_status(0x80b0) = 0x%x", rx_status);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB0,
MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
@@ -5087,14 +6335,15 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
/* Step 2: Check CL73 state machine */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_USERB0,
- MDIO_CL73_USERB0_CL73_USTAT1, &ustat_val);
+ MDIO_CL73_USERB0_CL73_USTAT1,
+ &ustat_val);
if ((ustat_val &
(MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) !=
(MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
- MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
- PMD_DRV_LOG(DEBUG, sc, "CL73 state-machine is not stable. "
- "ustat_val(0x8371) = 0x%x", ustat_val);
+ MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
+ ELINK_DEBUG_P1(sc, "CL73 state-machine is not stable. "
+ "ustat_val(0x8371) = 0x%x", ustat_val);
return;
}
/* Step 3: Check CL37 Message Pages received to indicate LP
@@ -5102,14 +6351,16 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
*/
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_REMOTE_PHY,
- MDIO_REMOTE_PHY_MISC_RX_STATUS, &cl37_fsm_received);
+ MDIO_REMOTE_PHY_MISC_RX_STATUS,
+ &cl37_fsm_received);
if ((cl37_fsm_received &
(MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
- MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
+ MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
(MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
- MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
- PMD_DRV_LOG(DEBUG, sc, "No CL37 FSM were received. "
- "misc_rx_status(0x8330) = 0x%x", cl37_fsm_received);
+ MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
+ ELINK_DEBUG_P1(sc, "No CL37 FSM were received. "
+ "misc_rx_status(0x8330) = 0x%x",
+ cl37_fsm_received);
return;
}
/* The combined cl37/cl73 fsm state information indicating that
@@ -5121,34 +6372,38 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
/* Disable CL73 */
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB0,
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0);
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+ 0);
/* Restart CL37 autoneg */
elink_restart_autoneg(phy, params, 0);
- PMD_DRV_LOG(DEBUG, sc, "Disabling CL73, and restarting CL37 autoneg");
+ ELINK_DEBUG_P0(sc, "Disabling CL73, and restarting CL37 autoneg");
}
static void elink_xgxs_an_resolve(struct elink_phy *phy,
struct elink_params *params,
- struct elink_vars *vars, uint32_t gp_status)
+ struct elink_vars *vars,
+ uint32_t gp_status)
{
if (gp_status & ELINK_MDIO_AN_CL73_OR_37_COMPLETE)
- vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ vars->link_status |=
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
if (elink_direct_parallel_detect_used(phy, params))
- vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED;
+ vars->link_status |=
+ LINK_STATUS_PARALLEL_DETECTION_USED;
}
-
static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
- struct elink_params *params __rte_unused,
- struct elink_vars *vars,
- uint16_t is_link_up,
- uint16_t speed_mask,
- uint16_t is_duplex)
+ struct elink_params *params,
+ struct elink_vars *vars,
+ uint16_t is_link_up,
+ uint16_t speed_mask,
+ uint16_t is_duplex)
{
+ struct bnx2x_softc *sc = params->sc;
if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
if (is_link_up) {
- PMD_DRV_LOG(DEBUG, params->sc, "phy link up");
+ ELINK_DEBUG_P0(sc, "phy link up");
vars->phy_link_up = 1;
vars->link_status |= LINK_STATUS_LINK_UP;
@@ -5189,9 +6444,9 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
case ELINK_GP_STATUS_5G:
case ELINK_GP_STATUS_6G:
- PMD_DRV_LOG(DEBUG, params->sc,
- "link speed unsupported gp_status 0x%x",
- speed_mask);
+ ELINK_DEBUG_P1(sc,
+ "link speed unsupported gp_status 0x%x",
+ speed_mask);
return ELINK_STATUS_ERROR;
case ELINK_GP_STATUS_10G_KX4:
@@ -5209,13 +6464,13 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
vars->link_status |= ELINK_LINK_20GTFD;
break;
default:
- PMD_DRV_LOG(DEBUG, params->sc,
- "link speed unsupported gp_status 0x%x",
- speed_mask);
+ ELINK_DEBUG_P1(sc,
+ "link speed unsupported gp_status 0x%x",
+ speed_mask);
return ELINK_STATUS_ERROR;
}
- } else { /* link_down */
- PMD_DRV_LOG(DEBUG, params->sc, "phy link down");
+ } else { /* link_down */
+ ELINK_DEBUG_P0(sc, "phy link down");
vars->phy_link_up = 0;
@@ -5223,14 +6478,16 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
vars->mac_type = ELINK_MAC_TYPE_NONE;
}
- PMD_DRV_LOG(DEBUG, params->sc, " phy_link_up %x line_speed %d",
+ ELINK_DEBUG_P2(sc, " in elink_get_link_speed_duplex vars->link_status = %x, vars->duplex = %x",
+ vars->link_status, vars->duplex);
+ ELINK_DEBUG_P2(sc, " phy_link_up %x line_speed %d",
vars->phy_link_up, vars->line_speed);
return ELINK_STATUS_OK;
}
static uint8_t elink_link_settings_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
@@ -5240,14 +6497,23 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
/* Read gp_status */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_GP_STATUS,
- MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status);
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
+ MDIO_GP_STATUS_TOP_AN_STATUS1,
+ &gp_status);
+ if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) {
duplex = DUPLEX_FULL;
+ ELINK_DEBUG_P1(sc, "duplex status read from phy is = %x",
+ duplex);
+ } else {
+ ELINK_DEBUG_P1(sc, "phy status does not allow interface to be FULL_DUPLEX : %x",
+ gp_status);
+ }
+
+
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)
link_up = 1;
speed_mask = gp_status & ELINK_GP_STATUS_SPEED_MASK;
- PMD_DRV_LOG(DEBUG, sc, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x",
- gp_status, link_up, speed_mask);
+ ELINK_DEBUG_P3(sc, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x",
+ gp_status, link_up, speed_mask);
rc = elink_get_link_speed_duplex(phy, params, vars, link_up, speed_mask,
duplex);
if (rc == ELINK_STATUS_ERROR)
@@ -5261,7 +6527,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
elink_xgxs_an_resolve(phy, params, vars,
gp_status);
}
- } else { /* Link_down */
+ } else { /* Link_down */
if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
ELINK_SINGLE_MEDIA_DIRECT(params)) {
/* Check signal is detected */
@@ -5269,7 +6535,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
}
}
- /* Read LP advertised speeds */
+ /* Read LP advertised speeds*/
if (ELINK_SINGLE_MEDIA_DIRECT(params) &&
(vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)) {
uint16_t val;
@@ -5279,61 +6545,69 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX)
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 |
MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_OVER_1G,
MDIO_OVER_1G_LP_UP1, &val);
if (val & MDIO_OVER_1G_UP1_2_5G)
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
}
- PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
- vars->duplex, vars->flow_ctrl, vars->link_status);
+ ELINK_DEBUG_P3(sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
+ vars->duplex, vars->flow_ctrl, vars->link_status);
return rc;
}
static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t lane;
uint16_t gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL;
elink_status_t rc = ELINK_STATUS_OK;
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
/* Read gp_status */
- if ((params->loopback_mode) && (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)) {
+ if ((params->loopback_mode) &&
+ (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)) {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
link_up &= 0x1;
+ ELINK_DEBUG_P1(sc, "params->loopback_mode link_up read = %x",
+ link_up);
} else if ((phy->req_line_speed > ELINK_SPEED_10000) &&
- (phy->supported & ELINK_SUPPORTED_20000baseMLD2_Full)) {
+ (phy->supported & ELINK_SUPPORTED_20000baseMLD2_Full)) {
uint16_t temp_link_up;
- elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &temp_link_up);
- elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &link_up);
- PMD_DRV_LOG(DEBUG, sc, "PCS RX link status = 0x%x-->0x%x",
- temp_link_up, link_up);
+ elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
+ 1, &temp_link_up);
+ elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
+ 1, &link_up);
+ ELINK_DEBUG_P2(sc, "PCS RX link status = 0x%x-->0x%x",
+ temp_link_up, link_up);
link_up &= (1 << 2);
if (link_up)
elink_ext_phy_resolve_fc(phy, params, vars);
} else {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1);
- PMD_DRV_LOG(DEBUG, sc, "0x81d1 = 0x%x", gp_status1);
+ MDIO_WC_REG_GP2_STATUS_GP_2_1,
+ &gp_status1);
+ ELINK_DEBUG_P1(sc, "0x81d1 = 0x%x", gp_status1);
/* Check for either KR, 1G, or AN up. */
link_up = ((gp_status1 >> 8) |
- (gp_status1 >> 12) | (gp_status1)) & (1 << lane);
+ (gp_status1 >> 12) |
+ (gp_status1)) &
+ (1 << lane);
if (phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) {
uint16_t an_link;
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
@@ -5341,6 +6615,8 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_STATUS, &an_link);
link_up |= (an_link & (1 << 2));
+ ELINK_DEBUG_P2(sc, "an_link = %x, link_up = %x",
+ an_link, link_up);
}
if (link_up && ELINK_SINGLE_MEDIA_DIRECT(params)) {
uint16_t pd, gp_status4;
@@ -5351,7 +6627,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
&gp_status4);
if (gp_status4 & ((1 << 12) << lane))
vars->link_status |=
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
/* Check parallel detect used */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
@@ -5359,13 +6635,19 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
&pd);
if (pd & (1 << 15))
vars->link_status |=
- LINK_STATUS_PARALLEL_DETECTION_USED;
+ LINK_STATUS_PARALLEL_DETECTION_USED;
+ ELINK_DEBUG_P2(sc, "pd = %x, link_status = %x",
+ pd, vars->link_status);
}
elink_ext_phy_resolve_fc(phy, params, vars);
vars->duplex = duplex;
+ ELINK_DEBUG_P3(sc, " ELINK_SINGLE_MEDIA_DIRECT duplex %x flow_ctrl 0x%x link_status 0x%x",
+ vars->duplex, vars->flow_ctrl,
+ vars->link_status);
}
}
-
+ ELINK_DEBUG_P3(sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
+ vars->duplex, vars->flow_ctrl, vars->link_status);
if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) &&
ELINK_SINGLE_MEDIA_DIRECT(params)) {
uint16_t val;
@@ -5375,24 +6657,28 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX)
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 |
MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
-
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ ELINK_DEBUG_P2(sc, "val = %x, link_status = %x",
+ val, vars->link_status);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL3_LP_UP1, &val);
if (val & MDIO_OVER_1G_UP1_2_5G)
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ ELINK_DEBUG_P2(sc, "val = %x, link_status = %x",
+ val, vars->link_status);
}
+
if (lane < 2) {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed);
@@ -5400,12 +6686,12 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed);
}
- PMD_DRV_LOG(DEBUG, sc, "lane %d gp_speed 0x%x", lane, gp_speed);
+ ELINK_DEBUG_P2(sc, "lane %d gp_speed 0x%x", lane, gp_speed);
if ((lane & 1) == 0)
gp_speed <<= 8;
gp_speed &= 0x3f00;
- link_up = ! !link_up;
+ link_up = !!link_up;
/* Reset the TX FIFO to fix SGMII issue */
rc = elink_get_link_speed_duplex(phy, params, vars, link_up, gp_speed,
@@ -5416,11 +6702,10 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
(!(phy->flags & ELINK_FLAGS_WC_DUAL_MODE)))
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
- PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
- vars->duplex, vars->flow_ctrl, vars->link_status);
+ ELINK_DEBUG_P3(sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
+ vars->duplex, vars->flow_ctrl, vars->link_status);
return rc;
}
-
static void elink_set_gmii_tx_driver(struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
@@ -5431,7 +6716,8 @@ static void elink_set_gmii_tx_driver(struct elink_params *params)
/* Read precomp */
CL22_RD_OVER_CL45(sc, phy,
- MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_LP_UP2, &lp_up2);
+ MDIO_REG_BANK_OVER_1G,
+ MDIO_OVER_1G_LP_UP2, &lp_up2);
/* Bits [10:7] at lp_up2, positioned at [15:12] */
lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
@@ -5442,32 +6728,36 @@ static void elink_set_gmii_tx_driver(struct elink_params *params)
return;
for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3;
- bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
+ bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
CL22_RD_OVER_CL45(sc, phy,
- bank, MDIO_TX0_TX_DRIVER, &tx_driver);
+ bank,
+ MDIO_TX0_TX_DRIVER, &tx_driver);
/* Replace tx_driver bits [15:12] */
- if (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
+ if (lp_up2 !=
+ (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
tx_driver |= lp_up2;
CL22_WR_OVER_CL45(sc, phy,
- bank, MDIO_TX0_TX_DRIVER, tx_driver);
+ bank,
+ MDIO_TX0_TX_DRIVER, tx_driver);
}
}
}
static elink_status_t elink_emac_program(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
uint16_t mode = 0;
- PMD_DRV_LOG(DEBUG, sc, "setting link speed & duplex");
+ ELINK_DEBUG_P0(sc, "setting link speed & duplex");
elink_bits_dis(sc, GRCBASE_EMAC0 + port * 0x400 +
EMAC_REG_EMAC_MODE,
(EMAC_MODE_25G_MODE |
- EMAC_MODE_PORT_MII_10M | EMAC_MODE_HALF_DUPLEX));
+ EMAC_MODE_PORT_MII_10M |
+ EMAC_MODE_HALF_DUPLEX));
switch (vars->line_speed) {
case ELINK_SPEED_10:
mode |= EMAC_MODE_PORT_MII_10M;
@@ -5487,15 +6777,16 @@ static elink_status_t elink_emac_program(struct elink_params *params,
default:
/* 10G not valid for EMAC */
- PMD_DRV_LOG(DEBUG, sc,
- "Invalid line_speed 0x%x", vars->line_speed);
+ ELINK_DEBUG_P1(sc, "Invalid line_speed 0x%x",
+ vars->line_speed);
return ELINK_STATUS_ERROR;
}
if (vars->duplex == DUPLEX_HALF)
mode |= EMAC_MODE_HALF_DUPLEX;
elink_bits_en(sc,
- GRCBASE_EMAC0 + port * 0x400 + EMAC_REG_EMAC_MODE, mode);
+ GRCBASE_EMAC0 + port * 0x400 + EMAC_REG_EMAC_MODE,
+ mode);
elink_set_led(params, vars, ELINK_LED_MODE_OPER, vars->line_speed);
return ELINK_STATUS_OK;
@@ -5512,24 +6803,26 @@ static void elink_set_preemphasis(struct elink_phy *phy,
bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0), i++) {
CL22_WR_OVER_CL45(sc, phy,
bank,
- MDIO_RX0_RX_EQ_BOOST, phy->rx_preemphasis[i]);
+ MDIO_RX0_RX_EQ_BOOST,
+ phy->rx_preemphasis[i]);
}
for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3;
bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) {
CL22_WR_OVER_CL45(sc, phy,
bank,
- MDIO_TX0_TX_DRIVER, phy->tx_preemphasis[i]);
+ MDIO_TX0_TX_DRIVER,
+ phy->tx_preemphasis[i]);
}
}
static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
+ struct bnx2x_softc *sc = params->sc;
uint8_t enable_cl73 = (ELINK_SINGLE_MEDIA_DIRECT(params) ||
- (params->loopback_mode == ELINK_LOOPBACK_XGXS));
-
+ (params->loopback_mode == ELINK_LOOPBACK_XGXS));
if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
if (ELINK_SINGLE_MEDIA_DIRECT(params) &&
(params->feature_config_flags &
@@ -5540,7 +6833,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
if (vars->line_speed != ELINK_SPEED_AUTO_NEG ||
(ELINK_SINGLE_MEDIA_DIRECT(params) &&
params->loopback_mode == ELINK_LOOPBACK_EXT)) {
- PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, no AN");
+ ELINK_DEBUG_P0(sc, "not SGMII, no AN");
/* Disable autoneg */
elink_set_autoneg(phy, params, vars, 0);
@@ -5548,8 +6841,8 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
/* Program speed and duplex */
elink_program_serdes(phy, params, vars);
- } else { /* AN_mode */
- PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, AN");
+ } else { /* AN_mode */
+ ELINK_DEBUG_P0(sc, "not SGMII, AN");
/* AN enabled */
elink_set_brcm_cl37_advertisement(phy, params);
@@ -5565,8 +6858,8 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
elink_restart_autoneg(phy, params, enable_cl73);
}
- } else { /* SGMII mode */
- PMD_DRV_LOG(DEBUG, params->sc, "SGMII");
+ } else { /* SGMII mode */
+ ELINK_DEBUG_P0(sc, "SGMII");
elink_initialize_sgmii_process(phy, params, vars);
}
@@ -5575,8 +6868,8 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
}
static elink_status_t elink_prepare_xgxs(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
elink_status_t rc;
vars->phy_flags |= PHY_XGXS_FLAG;
@@ -5614,28 +6907,32 @@ static elink_status_t elink_prepare_xgxs(struct elink_phy *phy,
}
static uint16_t elink_wait_reset_complete(struct bnx2x_softc *sc,
- struct elink_phy *phy,
- struct elink_params *params)
+ struct elink_phy *phy,
+ struct elink_params *params)
{
uint16_t cnt, ctrl;
/* Wait for soft reset to get cleared up to 1 sec */
for (cnt = 0; cnt < 1000; cnt++) {
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
- elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &ctrl);
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE)
+ elink_cl22_read(sc, phy,
+ MDIO_PMA_REG_CTRL, &ctrl);
else
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL, &ctrl);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, &ctrl);
if (!(ctrl & (1 << 15)))
break;
DELAY(1000 * 1);
}
if (cnt == 1000)
- elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized,"
- // " Port %d",
+ elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED,
+ params->port);
+ /* "Warning: PHY was not initialized,"
+ * " Port %d",
+ */
- PMD_DRV_LOG(DEBUG, sc, "control reg 0x%x (after %d ms)", ctrl, cnt);
+ ELINK_DEBUG_P2(sc, "control reg 0x%x (after %d ms)", ctrl, cnt);
return cnt;
}
@@ -5653,37 +6950,38 @@ static void elink_link_int_enable(struct elink_params *params)
} else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) {
mask = (ELINK_NIG_MASK_XGXS0_LINK10G |
ELINK_NIG_MASK_XGXS0_LINK_STATUS);
- PMD_DRV_LOG(DEBUG, sc, "enabled XGXS interrupt");
+ ELINK_DEBUG_P0(sc, "enabled XGXS interrupt");
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
- params->phy[ELINK_INT_PHY].type !=
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) {
+ params->phy[ELINK_INT_PHY].type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) {
mask |= ELINK_NIG_MASK_MI_INT;
- PMD_DRV_LOG(DEBUG, sc, "enabled external phy int");
+ ELINK_DEBUG_P0(sc, "enabled external phy int");
}
- } else { /* SerDes */
+ } else { /* SerDes */
mask = ELINK_NIG_MASK_SERDES0_LINK_STATUS;
- PMD_DRV_LOG(DEBUG, sc, "enabled SerDes interrupt");
+ ELINK_DEBUG_P0(sc, "enabled SerDes interrupt");
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
- params->phy[ELINK_INT_PHY].type !=
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) {
+ params->phy[ELINK_INT_PHY].type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) {
mask |= ELINK_NIG_MASK_MI_INT;
- PMD_DRV_LOG(DEBUG, sc, "enabled external phy int");
+ ELINK_DEBUG_P0(sc, "enabled external phy int");
}
}
- elink_bits_en(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, mask);
+ elink_bits_en(sc,
+ NIG_REG_MASK_INTERRUPT_PORT0 + port * 4,
+ mask);
- PMD_DRV_LOG(DEBUG, sc, "port %x, is_xgxs %x, int_status 0x%x", port,
- (params->switch_cfg == ELINK_SWITCH_CFG_10G),
- REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
- PMD_DRV_LOG(DEBUG, sc, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x",
- REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
- REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18),
- REG_RD(sc,
- NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
- PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x",
- REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
- REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
+ ELINK_DEBUG_P3(sc, "port %x, is_xgxs %x, int_status 0x%x", port,
+ (params->switch_cfg == ELINK_SWITCH_CFG_10G),
+ REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
+ ELINK_DEBUG_P3(sc, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x",
+ REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
+ REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18),
+ REG_RD(sc, NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
+ ELINK_DEBUG_P2(sc, " 10G %x, XGXS_LINK %x",
+ REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
+ REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
}
static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port,
@@ -5696,17 +6994,20 @@ static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port,
* so in this case we need to write the status to clear the XOR
*/
/* Read Latched signals */
- latch_status = REG_RD(sc, NIG_REG_LATCH_STATUS_0 + port * 8);
- PMD_DRV_LOG(DEBUG, sc, "latch_status = 0x%x", latch_status);
- /* Handle only those with latched-signal=up. */
+ latch_status = REG_RD(sc,
+ NIG_REG_LATCH_STATUS_0 + port * 8);
+ ELINK_DEBUG_P1(sc, "latch_status = 0x%x", latch_status);
+ /* Handle only those with latched-signal=up.*/
if (exp_mi_int)
elink_bits_en(sc,
NIG_REG_STATUS_INTERRUPT_PORT0
- + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT);
+ + port * 4,
+ ELINK_NIG_STATUS_EMAC0_MI_INT);
else
elink_bits_dis(sc,
NIG_REG_STATUS_INTERRUPT_PORT0
- + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT);
+ + port * 4,
+ ELINK_NIG_STATUS_EMAC0_MI_INT);
if (latch_status & 1) {
@@ -5741,23 +7042,24 @@ static void elink_link_int_ack(struct elink_params *params,
* the relevant lane in the status register
*/
uint32_t ser_lane =
- ((params->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+ ((params->lane_config &
+ PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+ PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
mask = ((1 << ser_lane) <<
- ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE);
+ ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE);
} else
mask = ELINK_NIG_STATUS_SERDES0_LINK_STATUS;
}
- PMD_DRV_LOG(DEBUG, sc, "Ack link up interrupt with mask 0x%x",
- mask);
+ ELINK_DEBUG_P1(sc, "Ack link up interrupt with mask 0x%x",
+ mask);
elink_bits_en(sc,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, mask);
+ NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4,
+ mask);
}
}
-static uint8_t elink_format_ver(uint32_t num, uint8_t * str,
- uint16_t * len)
+static elink_status_t elink_format_ver(uint32_t num, uint8_t *str,
+ uint16_t *len)
{
uint8_t *str_ptr = str;
uint32_t mask = 0xf0000000;
@@ -5795,14 +7097,57 @@ static uint8_t elink_format_ver(uint32_t num, uint8_t * str,
return ELINK_STATUS_OK;
}
-static uint8_t elink_null_format_ver(__rte_unused uint32_t spirom_ver,
- uint8_t * str, uint16_t * len)
+
+static elink_status_t elink_null_format_ver(__rte_unused uint32_t spirom_ver,
+ uint8_t *str,
+ uint16_t *len)
{
str[0] = '\0';
(*len)--;
return ELINK_STATUS_OK;
}
+elink_status_t elink_get_ext_phy_fw_version(struct elink_params *params,
+ uint8_t *version,
+ uint16_t len)
+{
+ struct bnx2x_softc *sc;
+ uint32_t spirom_ver = 0;
+ elink_status_t status = ELINK_STATUS_OK;
+ uint8_t *ver_p = version;
+ uint16_t remain_len = len;
+ if (version == NULL || params == NULL)
+ return ELINK_STATUS_ERROR;
+ sc = params->sc;
+
+ /* Extract first external phy*/
+ version[0] = '\0';
+ spirom_ver = REG_RD(sc, params->phy[ELINK_EXT_PHY1].ver_addr);
+
+ if (params->phy[ELINK_EXT_PHY1].format_fw_ver) {
+ status |= params->phy[ELINK_EXT_PHY1].format_fw_ver(spirom_ver,
+ ver_p,
+ &remain_len);
+ ver_p += (len - remain_len);
+ }
+ if ((params->num_phys == ELINK_MAX_PHYS) &&
+ (params->phy[ELINK_EXT_PHY2].ver_addr != 0)) {
+ spirom_ver = REG_RD(sc, params->phy[ELINK_EXT_PHY2].ver_addr);
+ if (params->phy[ELINK_EXT_PHY2].format_fw_ver) {
+ *ver_p = '/';
+ ver_p++;
+ remain_len--;
+ status |= params->phy[ELINK_EXT_PHY2].format_fw_ver(
+ spirom_ver,
+ ver_p,
+ &remain_len);
+ ver_p = version + (len - remain_len);
+ }
+ }
+ *ver_p = '\0';
+ return status;
+}
+
static void elink_set_xgxs_loopback(struct elink_phy *phy,
struct elink_params *params)
{
@@ -5812,7 +7157,7 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy,
if (phy->req_line_speed != ELINK_SPEED_1000) {
uint32_t md_devad = 0;
- PMD_DRV_LOG(DEBUG, sc, "XGXS 10G loopback enable");
+ ELINK_DEBUG_P0(sc, "XGXS 10G loopback enable");
if (!CHIP_IS_E3(sc)) {
/* Change the uni_phy_addr in the nig */
@@ -5826,7 +7171,8 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy,
elink_cl45_write(sc, phy,
5,
(MDIO_REG_BANK_AER_BLOCK +
- (MDIO_AER_BLOCK_AER_REG & 0xf)), 0x2800);
+ (MDIO_AER_BLOCK_AER_REG & 0xf)),
+ 0x2800);
elink_cl45_write(sc, phy,
5,
@@ -5844,22 +7190,21 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy,
}
} else {
uint16_t mii_ctrl;
- PMD_DRV_LOG(DEBUG, sc, "XGXS 1G loopback enable");
+ ELINK_DEBUG_P0(sc, "XGXS 1G loopback enable");
elink_cl45_read(sc, phy, 5,
(MDIO_REG_BANK_COMBO_IEEE0 +
- (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
+ (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
&mii_ctrl);
elink_cl45_write(sc, phy, 5,
(MDIO_REG_BANK_COMBO_IEEE0 +
- (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
+ (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
mii_ctrl |
MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK);
}
}
elink_status_t elink_set_led(struct elink_params *params,
- struct elink_vars *vars, uint8_t mode,
- uint32_t speed)
+ struct elink_vars *vars, uint8_t mode, uint32_t speed)
{
uint8_t port = params->port;
uint16_t hw_led_mode = params->hw_led_mode;
@@ -5868,16 +7213,21 @@ elink_status_t elink_set_led(struct elink_params *params,
uint32_t tmp;
uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "elink_set_led: port %x, mode %d", port, mode);
- PMD_DRV_LOG(DEBUG, sc,
- "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode);
+ ELINK_DEBUG_P2(sc, "elink_set_led: port %x, mode %d", port, mode);
+ ELINK_DEBUG_P2(sc, "speed 0x%x, hw_led_mode 0x%x",
+ speed, hw_led_mode);
/* In case */
for (phy_idx = ELINK_EXT_PHY1; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
if (params->phy[phy_idx].set_link_led) {
- params->phy[phy_idx].set_link_led(&params->phy[phy_idx],
- params, mode);
+ params->phy[phy_idx].set_link_led(
+ &params->phy[phy_idx], params, mode);
}
}
+#ifdef ELINK_INCLUDE_EMUL
+ if (params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC)
+ return rc;
+#endif
switch (mode) {
case ELINK_LED_MODE_FRONT_PANEL_OFF:
@@ -5888,10 +7238,10 @@ elink_status_t elink_set_led(struct elink_params *params,
tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED);
if (params->phy[ELINK_EXT_PHY1].type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
+ PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE)
tmp &= ~(EMAC_LED_1000MB_OVERRIDE |
- EMAC_LED_100MB_OVERRIDE |
- EMAC_LED_10MB_OVERRIDE);
+ EMAC_LED_100MB_OVERRIDE |
+ EMAC_LED_10MB_OVERRIDE);
else
tmp |= EMAC_LED_OVERRIDE;
@@ -5904,25 +7254,22 @@ elink_status_t elink_set_led(struct elink_params *params,
*/
if (!vars->link_up)
break;
- /* fall-through */
+ /* fallthrough */
case ELINK_LED_MODE_ON:
if (((params->phy[ELINK_EXT_PHY1].type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727) ||
- (params->phy[ELINK_EXT_PHY1].type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722)) &&
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727) ||
+ (params->phy[ELINK_EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722)) &&
CHIP_IS_E2(sc) && params->num_phys == 2) {
- /* This is a work-around for E2+8727 Configurations */
+ /* This is a work-around for E2 + 8727 Configurations */
if (mode == ELINK_LED_MODE_ON ||
- speed == ELINK_SPEED_10000) {
+ speed == ELINK_SPEED_10000){
REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1);
- tmp =
- elink_cb_reg_read(sc,
- emac_base +
- EMAC_REG_EMAC_LED);
- elink_cb_reg_write(sc,
- emac_base +
+ tmp = elink_cb_reg_read(sc, emac_base +
+ EMAC_REG_EMAC_LED);
+ elink_cb_reg_write(sc, emac_base +
EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
/* Return here without enabling traffic
@@ -5938,22 +7285,23 @@ elink_status_t elink_set_led(struct elink_params *params,
* is up in CL73
*/
if ((!CHIP_IS_E3(sc)) ||
- (CHIP_IS_E3(sc) && mode == ELINK_LED_MODE_ON))
+ (CHIP_IS_E3(sc) &&
+ mode == ELINK_LED_MODE_ON))
REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1);
if (CHIP_IS_E1x(sc) ||
- CHIP_IS_E2(sc) || (mode == ELINK_LED_MODE_ON))
+ CHIP_IS_E2(sc) ||
+ (mode == ELINK_LED_MODE_ON))
REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
else
REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4,
hw_led_mode);
} else if ((params->phy[ELINK_EXT_PHY1].type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) &&
+ PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE) &&
(mode == ELINK_LED_MODE_ON)) {
REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
- tmp =
- elink_cb_reg_read(sc,
- emac_base + EMAC_REG_EMAC_LED);
+ tmp = elink_cb_reg_read(sc, emac_base +
+ EMAC_REG_EMAC_LED);
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED,
tmp | EMAC_LED_OVERRIDE |
EMAC_LED_1000MB_OVERRIDE);
@@ -5963,11 +7311,10 @@ elink_status_t elink_set_led(struct elink_params *params,
break;
} else {
uint32_t nig_led_mode = ((params->hw_led_mode <<
- SHARED_HW_CFG_LED_MODE_SHIFT)
- ==
- SHARED_HW_CFG_LED_EXTPHY2)
- ? (SHARED_HW_CFG_LED_PHY1 >>
- SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode;
+ SHARED_HW_CFG_LED_MODE_SHIFT) ==
+ SHARED_HW_CFG_LED_EXTPHY2) ?
+ (SHARED_HW_CFG_LED_PHY1 >>
+ SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode;
REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4,
nig_led_mode);
}
@@ -5981,27 +7328,133 @@ elink_status_t elink_set_led(struct elink_params *params,
else
REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port * 4,
LED_BLINK_RATE_VAL_E1X_E2);
- REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port * 4, 1);
+ REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
+ port * 4, 1);
tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED);
elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED,
- (tmp & (~EMAC_LED_OVERRIDE)));
+ (tmp & (~EMAC_LED_OVERRIDE)));
+ if (CHIP_IS_E1(sc) &&
+ ((speed == ELINK_SPEED_2500) ||
+ (speed == ELINK_SPEED_1000) ||
+ (speed == ELINK_SPEED_100) ||
+ (speed == ELINK_SPEED_10))) {
+ /* For speeds less than 10G LED scheme is different */
+ REG_WR(sc, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
+ + port * 4, 1);
+ REG_WR(sc, NIG_REG_LED_CONTROL_TRAFFIC_P0 +
+ port * 4, 0);
+ REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 +
+ port * 4, 1);
+ }
break;
default:
rc = ELINK_STATUS_ERROR;
- PMD_DRV_LOG(DEBUG, sc,
- "elink_set_led: Invalid led mode %d", mode);
+ ELINK_DEBUG_P1(sc, "elink_set_led: Invalid led mode %d",
+ mode);
break;
}
return rc;
}
+/* This function comes to reflect the actual link state read DIRECTLY from the
+ * HW
+ */
+elink_status_t elink_test_link(struct elink_params *params,
+ __rte_unused struct elink_vars *vars,
+ uint8_t is_serdes)
+{
+ struct bnx2x_softc *sc = params->sc;
+ uint16_t gp_status = 0, phy_index = 0;
+ uint8_t ext_phy_link_up = 0, serdes_phy_type;
+ struct elink_vars temp_vars;
+ struct elink_phy *int_phy = &params->phy[ELINK_INT_PHY];
+#ifdef ELINK_INCLUDE_FPGA
+ if (CHIP_REV_IS_FPGA(sc))
+ return ELINK_STATUS_OK;
+#endif
+#ifdef ELINK_INCLUDE_EMUL
+ if (CHIP_REV_IS_EMUL(sc))
+ return ELINK_STATUS_OK;
+#endif
+
+ if (CHIP_IS_E3(sc)) {
+ uint16_t link_up;
+ if (params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)]
+ > ELINK_SPEED_10000) {
+ /* Check 20G link */
+ elink_cl45_read(sc, int_phy, MDIO_WC_DEVAD,
+ 1, &link_up);
+ elink_cl45_read(sc, int_phy, MDIO_WC_DEVAD,
+ 1, &link_up);
+ link_up &= (1 << 2);
+ } else {
+ /* Check 10G link and below*/
+ uint8_t lane = elink_get_warpcore_lane(int_phy, params);
+ elink_cl45_read(sc, int_phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_GP2_STATUS_GP_2_1,
+ &gp_status);
+ gp_status = ((gp_status >> 8) & 0xf) |
+ ((gp_status >> 12) & 0xf);
+ link_up = gp_status & (1 << lane);
+ }
+ if (!link_up)
+ return ELINK_STATUS_NO_LINK;
+ } else {
+ CL22_RD_OVER_CL45(sc, int_phy,
+ MDIO_REG_BANK_GP_STATUS,
+ MDIO_GP_STATUS_TOP_AN_STATUS1,
+ &gp_status);
+ /* Link is up only if both local phy and external phy are up */
+ if (!(gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS))
+ return ELINK_STATUS_NO_LINK;
+ }
+ /* In XGXS loopback mode, do not check external PHY */
+ if (params->loopback_mode == ELINK_LOOPBACK_XGXS)
+ return ELINK_STATUS_OK;
+
+ switch (params->num_phys) {
+ case 1:
+ /* No external PHY */
+ return ELINK_STATUS_OK;
+ case 2:
+ ext_phy_link_up = params->phy[ELINK_EXT_PHY1].read_status(
+ &params->phy[ELINK_EXT_PHY1],
+ params, &temp_vars);
+ break;
+ case 3: /* Dual Media */
+ for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
+ phy_index++) {
+ serdes_phy_type = ((params->phy[phy_index].media_type ==
+ ELINK_ETH_PHY_SFPP_10G_FIBER) ||
+ (params->phy[phy_index].media_type ==
+ ELINK_ETH_PHY_SFP_1G_FIBER) ||
+ (params->phy[phy_index].media_type ==
+ ELINK_ETH_PHY_XFP_FIBER) ||
+ (params->phy[phy_index].media_type ==
+ ELINK_ETH_PHY_DA_TWINAX));
+
+ if (is_serdes != serdes_phy_type)
+ continue;
+ if (params->phy[phy_index].read_status) {
+ ext_phy_link_up |=
+ params->phy[phy_index].read_status(
+ &params->phy[phy_index],
+ params, &temp_vars);
+ }
+ }
+ break;
+ }
+ if (ext_phy_link_up)
+ return ELINK_STATUS_OK;
+ return ELINK_STATUS_NO_LINK;
+}
+
static elink_status_t elink_link_initialize(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars)
{
- elink_status_t rc = ELINK_STATUS_OK;
uint8_t phy_index, non_ext_phy;
struct bnx2x_softc *sc = params->sc;
/* In case of external phy existence, the line speed would be the
@@ -6026,11 +7479,12 @@ static elink_status_t elink_link_initialize(struct elink_params *params,
(params->loopback_mode == ELINK_LOOPBACK_EXT_PHY)) {
struct elink_phy *phy = &params->phy[ELINK_INT_PHY];
if (vars->line_speed == ELINK_SPEED_AUTO_NEG &&
- (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc)))
+ (CHIP_IS_E1x(sc) ||
+ CHIP_IS_E2(sc)))
elink_set_parallel_detection(phy, params);
if (params->phy[ELINK_INT_PHY].config_init)
- params->phy[ELINK_INT_PHY].config_init(phy,
- params, vars);
+ params->phy[ELINK_INT_PHY].config_init(phy, params,
+ vars);
}
/* Re-read this value in case it was changed inside config_init due to
@@ -6038,14 +7492,14 @@ static elink_status_t elink_link_initialize(struct elink_params *params,
*/
vars->line_speed = params->phy[ELINK_INT_PHY].req_line_speed;
- /* Init external phy */
+ /* Init external phy*/
if (non_ext_phy) {
if (params->phy[ELINK_INT_PHY].supported &
ELINK_SUPPORTED_FIBRE)
vars->link_status |= LINK_STATUS_SERDES_LINK;
} else {
for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
/* No need to initialize second phy in case of first
* phy only selection. In case of second phy, we do
* need to initialize the first phy, since they are
@@ -6058,13 +7512,13 @@ static elink_status_t elink_link_initialize(struct elink_params *params,
if (phy_index == ELINK_EXT_PHY2 &&
(elink_phy_selection(params) ==
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
- PMD_DRV_LOG(DEBUG, sc,
- "Not initializing second phy");
+ ELINK_DEBUG_P0(sc,
+ "Not initializing second phy");
continue;
}
- params->phy[phy_index].config_init(&params->
- phy[phy_index],
- params, vars);
+ params->phy[phy_index].config_init(
+ &params->phy[phy_index],
+ params, vars);
}
}
/* Reset the interrupt indication after phy was initialized */
@@ -6074,7 +7528,7 @@ static elink_status_t elink_link_initialize(struct elink_params *params,
ELINK_NIG_STATUS_XGXS0_LINK_STATUS |
ELINK_NIG_STATUS_SERDES0_LINK_STATUS |
ELINK_NIG_MASK_MI_INT));
- return rc;
+ return ELINK_STATUS_OK;
}
static void elink_int_link_reset(__rte_unused struct elink_phy *phy,
@@ -6096,19 +7550,21 @@ static void elink_common_ext_link_reset(__rte_unused struct elink_phy *phy,
else
gpio_port = params->port;
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW,
+ gpio_port);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
- PMD_DRV_LOG(DEBUG, sc, "reset external PHY");
+ MISC_REGISTERS_GPIO_OUTPUT_LOW,
+ gpio_port);
+ ELINK_DEBUG_P0(sc, "reset external PHY");
}
static elink_status_t elink_update_link_down(struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
- PMD_DRV_LOG(DEBUG, sc, "Port %x: Link is down", port);
+ ELINK_DEBUG_P1(sc, "Port %x: Link is down", port);
elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0);
vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG;
/* Indicate no mac active */
@@ -6128,8 +7584,9 @@ static elink_status_t elink_update_link_down(struct elink_params *params,
DELAY(1000 * 10);
/* Reset BigMac/Xmac */
- if (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))
- elink_set_bmac_rx(sc, params->port, 0);
+ if (CHIP_IS_E1x(sc) ||
+ CHIP_IS_E2(sc))
+ elink_set_bmac_rx(sc, params->chip_id, params->port, 0);
if (CHIP_IS_E3(sc)) {
/* Prevent LPI Generation by chip */
@@ -6149,8 +7606,8 @@ static elink_status_t elink_update_link_down(struct elink_params *params,
}
static elink_status_t elink_update_link_up(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t link_10g)
+ struct elink_vars *vars,
+ uint8_t link_10g)
{
struct bnx2x_softc *sc = params->sc;
uint8_t phy_idx, port = params->port;
@@ -6161,15 +7618,17 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
- vars->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+ vars->link_status |=
+ LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
- vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+ vars->link_status |=
+ LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
if (USES_WARPCORE(sc)) {
if (link_10g) {
if (elink_xmac_enable(params, vars, 0) ==
ELINK_STATUS_NO_LINK) {
- PMD_DRV_LOG(DEBUG, sc, "Found errors on XMAC");
+ ELINK_DEBUG_P0(sc, "Found errors on XMAC");
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
vars->link_status &= ~LINK_STATUS_LINK_UP;
@@ -6181,7 +7640,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) &&
(vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) {
- PMD_DRV_LOG(DEBUG, sc, "Enabling LPI assertion");
+ ELINK_DEBUG_P0(sc, "Enabling LPI assertion");
REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 +
(params->port << 2), 1);
REG_WR(sc, MISC_REG_CPMU_LP_DR_ENABLE, 1);
@@ -6189,11 +7648,12 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
(params->port << 2), 0xfc20);
}
}
- if ((CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))) {
+ if ((CHIP_IS_E1x(sc) ||
+ CHIP_IS_E2(sc))) {
if (link_10g) {
if (elink_bmac_enable(params, vars, 0, 1) ==
ELINK_STATUS_NO_LINK) {
- PMD_DRV_LOG(DEBUG, sc, "Found errors on BMAC");
+ ELINK_DEBUG_P0(sc, "Found errors on BMAC");
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
vars->link_status &= ~LINK_STATUS_LINK_UP;
@@ -6236,6 +7696,24 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
return rc;
}
+static void elink_chng_link_count(struct elink_params *params, uint8_t clear)
+{
+ struct bnx2x_softc *sc = params->sc;
+ uint32_t addr, val;
+
+ /* Verify the link_change_count is supported by the MFW */
+ if (!(SHMEM2_HAS(sc, link_change_count)))
+ return;
+
+ addr = params->shmem2_base +
+ offsetof(struct shmem2_region, link_change_count[params->port]);
+ if (clear)
+ val = 0;
+ else
+ val = REG_RD(sc, addr) + 1;
+ REG_WR(sc, addr, val);
+}
+
/* The elink_link_update function should be called upon link
* interrupt.
* Link is considered up as follows:
@@ -6248,24 +7726,24 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
* external phy needs to be up, and at least one of the 2
* external phy link must be up.
*/
-elink_status_t elink_link_update(struct elink_params * params,
- struct elink_vars * vars)
+elink_status_t elink_link_update(struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
struct elink_vars phy_vars[ELINK_MAX_PHYS];
uint8_t port = params->port;
uint8_t link_10g_plus, phy_index;
+ uint32_t prev_link_status = vars->link_status;
uint8_t ext_phy_link_up = 0, cur_link_up;
elink_status_t rc = ELINK_STATUS_OK;
- __rte_unused uint8_t is_mi_int = 0;
uint16_t ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
uint8_t active_external_phy = ELINK_INT_PHY;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
vars->link_status &= ~ELINK_LINK_UPDATE_MASK;
for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
phy_vars[phy_index].flow_ctrl = 0;
- phy_vars[phy_index].link_status = ETH_LINK_DOWN;
+ phy_vars[phy_index].link_status = 0;
phy_vars[phy_index].line_speed = 0;
phy_vars[phy_index].duplex = DUPLEX_FULL;
phy_vars[phy_index].phy_link_up = 0;
@@ -6278,21 +7756,18 @@ elink_status_t elink_link_update(struct elink_params * params,
if (USES_WARPCORE(sc))
elink_set_aer_mmd(params, &params->phy[ELINK_INT_PHY]);
- PMD_DRV_LOG(DEBUG, sc, "port %x, XGXS?%x, int_status 0x%x",
- port, (vars->phy_flags & PHY_XGXS_FLAG),
- REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
+ ELINK_DEBUG_P3(sc, "port %x, XGXS?%x, int_status 0x%x",
+ port, (vars->phy_flags & PHY_XGXS_FLAG),
+ REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
- is_mi_int = (uint8_t) (REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT +
- port * 0x18) > 0);
- PMD_DRV_LOG(DEBUG, sc, "int_mask 0x%x MI_INT %x, SERDES_LINK %x",
- REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
- is_mi_int,
- REG_RD(sc,
- NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
+ ELINK_DEBUG_P3(sc, "int_mask 0x%x MI_INT %x, SERDES_LINK %x",
+ REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
+ REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18) > 0,
+ REG_RD(sc, NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
- PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x",
- REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
- REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
+ ELINK_DEBUG_P2(sc, " 10G %x, XGXS_LINK %x",
+ REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
+ REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
/* Disable emac */
if (!CHIP_IS_E3(sc))
@@ -6306,7 +7781,7 @@ elink_status_t elink_link_update(struct elink_params * params,
* speed/duplex result
*/
for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
struct elink_phy *phy = &params->phy[phy_index];
if (!phy->read_status)
continue;
@@ -6314,11 +7789,11 @@ elink_status_t elink_link_update(struct elink_params * params,
cur_link_up = phy->read_status(phy, params,
&phy_vars[phy_index]);
if (cur_link_up) {
- PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is up",
- phy_index);
+ ELINK_DEBUG_P1(sc, "phy in index %d link is up",
+ phy_index);
} else {
- PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is down",
- phy_index);
+ ELINK_DEBUG_P1(sc, "phy in index %d link is down",
+ phy_index);
continue;
}
@@ -6329,30 +7804,30 @@ elink_status_t elink_link_update(struct elink_params * params,
switch (elink_phy_selection(params)) {
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
- /* In this option, the first PHY makes sure to pass the
- * traffic through itself only.
- * Its not clear how to reset the link on the second phy
- */
+ /* In this option, the first PHY makes sure to pass the
+ * traffic through itself only.
+ * Its not clear how to reset the link on the second phy
+ */
active_external_phy = ELINK_EXT_PHY1;
break;
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
- /* In this option, the first PHY makes sure to pass the
- * traffic through the second PHY.
- */
+ /* In this option, the first PHY makes sure to pass the
+ * traffic through the second PHY.
+ */
active_external_phy = ELINK_EXT_PHY2;
break;
default:
- /* Link indication on both PHYs with the following cases
- * is invalid:
- * - FIRST_PHY means that second phy wasn't initialized,
- * hence its link is expected to be down
- * - SECOND_PHY means that first phy should not be able
- * to link up by itself (using configuration)
- * - DEFAULT should be overridden during initialization
- */
- PMD_DRV_LOG(DEBUG, sc, "Invalid link indication"
- "mpc=0x%x. DISABLING LINK !!!",
- params->multi_phy_config);
+ /* Link indication on both PHYs with the following cases
+ * is invalid:
+ * - FIRST_PHY means that second phy wasn't initialized,
+ * hence its link is expected to be down
+ * - SECOND_PHY means that first phy should not be able
+ * to link up by itself (using configuration)
+ * - DEFAULT should be overridden during initialiazation
+ */
+ ELINK_DEBUG_P1(sc, "Invalid link indication"
+ " mpc=0x%x. DISABLING LINK !!!",
+ params->multi_phy_config);
ext_phy_link_up = 0;
break;
}
@@ -6366,9 +7841,9 @@ elink_status_t elink_link_update(struct elink_params * params,
* external phy
*/
if (params->phy[ELINK_INT_PHY].read_status)
- params->phy[ELINK_INT_PHY].read_status(&params->
- phy[ELINK_INT_PHY],
- params, vars);
+ params->phy[ELINK_INT_PHY].read_status(
+ &params->phy[ELINK_INT_PHY],
+ params, vars);
/* The INT_PHY flow control reside in the vars. This include the
* case where the speed or flow control are not set to AUTO.
* Otherwise, the active external phy flow control result is set
@@ -6388,11 +7863,11 @@ elink_status_t elink_link_update(struct elink_params * params,
*/
if (active_external_phy == ELINK_EXT_PHY1) {
if (params->phy[ELINK_EXT_PHY2].phy_specific_func) {
- PMD_DRV_LOG(DEBUG, sc, "Disabling TX on EXT_PHY2");
- params->phy[ELINK_EXT_PHY2].
- phy_specific_func(&params->
- phy[ELINK_EXT_PHY2],
- params, ELINK_DISABLE_TX);
+ ELINK_DEBUG_P0(sc,
+ "Disabling TX on EXT_PHY2");
+ params->phy[ELINK_EXT_PHY2].phy_specific_func(
+ &params->phy[ELINK_EXT_PHY2],
+ params, ELINK_DISABLE_TX);
}
}
@@ -6406,12 +7881,27 @@ elink_status_t elink_link_update(struct elink_params * params,
vars->eee_status = phy_vars[active_external_phy].eee_status;
- PMD_DRV_LOG(DEBUG, sc, "Active external phy selected: %x",
- active_external_phy);
- }
+ ELINK_DEBUG_P1(sc, "Active external phy selected: %x",
+ active_external_phy);
+ }
+
+ ELINK_DEBUG_P3(sc, "vars : phy_flags = %x, mac_type = %x, phy_link_up = %x",
+ vars->phy_flags, vars->mac_type, vars->phy_link_up);
+ ELINK_DEBUG_P3(sc, "vars : link_up = %x, line_speed = %x, duplex = %x",
+ vars->link_up, vars->line_speed, vars->duplex);
+ ELINK_DEBUG_P3(sc, "vars : flow_ctrl = %x, ieee_fc = %x, link_status = %x",
+ vars->flow_ctrl, vars->ieee_fc, vars->link_status);
+ ELINK_DEBUG_P3(sc, "vars : eee_status = %x, fault_detected = %x, check_kr2_recovery_cnt = %x",
+ vars->eee_status, vars->fault_detected,
+ vars->check_kr2_recovery_cnt);
+ ELINK_DEBUG_P3(sc, "vars : periodic_flags = %x, aeu_int_mask = %x, rx_tx_asic_rst = %x",
+ vars->periodic_flags, vars->aeu_int_mask,
+ vars->rx_tx_asic_rst);
+ ELINK_DEBUG_P2(sc, "vars : turn_to_run_wc_rt = %x, rsrv2 = %x",
+ vars->turn_to_run_wc_rt, vars->rsrv2);
for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
if (params->phy[phy_index].flags &
ELINK_FLAGS_REARM_LATCH_SIGNAL) {
elink_rearm_latch_signal(sc, port,
@@ -6420,9 +7910,9 @@ elink_status_t elink_link_update(struct elink_params * params,
break;
}
}
- PMD_DRV_LOG(DEBUG, sc, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
- " ext_phy_line_speed = %d", vars->flow_ctrl,
- vars->link_status, ext_phy_line_speed);
+ ELINK_DEBUG_P3(sc, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
+ " ext_phy_line_speed = %d", vars->flow_ctrl,
+ vars->link_status, ext_phy_line_speed);
/* Upon link speed change set the NIG into drain mode. Comes to
* deals with possible FIFO glitch due to clk change when speed
* is decreased without link down indicator
@@ -6431,15 +7921,15 @@ elink_status_t elink_link_update(struct elink_params * params,
if (vars->phy_link_up) {
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up &&
(ext_phy_line_speed != vars->line_speed)) {
- PMD_DRV_LOG(DEBUG, sc, "Internal link speed %d is"
- " different than the external"
- " link speed %d", vars->line_speed,
- ext_phy_line_speed);
+ ELINK_DEBUG_P2(sc, "Internal link speed %d is"
+ " different than the external"
+ " link speed %d", vars->line_speed,
+ ext_phy_line_speed);
vars->phy_link_up = 0;
+ ELINK_DEBUG_P0(sc, "phy_link_up set to 0");
} else if (prev_line_speed != vars->line_speed) {
- REG_WR(sc,
- NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4,
- 0);
+ REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE +
+ params->port * 4, 0);
DELAY(1000 * 1);
}
}
@@ -6457,11 +7947,11 @@ elink_status_t elink_link_update(struct elink_params * params,
* initialize it
*/
if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) {
- PMD_DRV_LOG(DEBUG, sc, "ext_phy_link_up = %d, int_link_up = %d,"
- " init_preceding = %d", ext_phy_link_up,
- vars->phy_link_up,
- params->phy[ELINK_EXT_PHY1].flags &
- ELINK_FLAGS_INIT_XGXS_FIRST);
+ ELINK_DEBUG_P3(sc, "ext_phy_link_up = %d, int_link_up = %d,"
+ " init_preceding = %d", ext_phy_link_up,
+ vars->phy_link_up,
+ params->phy[ELINK_EXT_PHY1].flags &
+ ELINK_FLAGS_INIT_XGXS_FIRST);
if (!(params->phy[ELINK_EXT_PHY1].flags &
ELINK_FLAGS_INIT_XGXS_FIRST)
&& ext_phy_link_up && !vars->phy_link_up) {
@@ -6472,11 +7962,9 @@ elink_status_t elink_link_update(struct elink_params * params,
vars->phy_flags &= ~PHY_SGMII_FLAG;
if (params->phy[ELINK_INT_PHY].config_init)
- params->phy[ELINK_INT_PHY].config_init(&params->
- phy
- [ELINK_INT_PHY],
- params,
- vars);
+ params->phy[ELINK_INT_PHY].config_init(
+ &params->phy[ELINK_INT_PHY], params,
+ vars);
}
}
/* Link is up only if both local phy and external phy (in case of
@@ -6487,6 +7975,11 @@ elink_status_t elink_link_update(struct elink_params * params,
ELINK_SINGLE_MEDIA_DIRECT(params)) &&
(phy_vars[active_external_phy].fault_detected == 0));
+ if (vars->link_up)
+ ELINK_DEBUG_P0(sc, "local phy and external phy are up");
+ else
+ ELINK_DEBUG_P0(sc, "either local phy or external phy or both are down");
+
/* Update the PFC configuration in case it was changed */
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
vars->link_status |= LINK_STATUS_PFC_ENABLED;
@@ -6498,9 +7991,12 @@ elink_status_t elink_link_update(struct elink_params * params,
else
rc = elink_update_link_down(params, vars);
+ if ((prev_link_status ^ vars->link_status) & LINK_STATUS_LINK_UP)
+ elink_chng_link_count(params, 0);
+
/* Update MCP link status was changed */
- if (params->
- feature_config_flags & ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX)
+ if (params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX)
elink_cb_fw_command(sc, DRV_MSG_CODE_LINK_STATUS_CHANGED, 0);
return rc;
@@ -6509,28 +8005,28 @@ elink_status_t elink_link_update(struct elink_params * params,
/*****************************************************************************/
/* External Phy section */
/*****************************************************************************/
-static void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port)
+void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port)
{
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
DELAY(1000 * 1);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
}
-static void elink_save_spirom_version(struct bnx2x_softc *sc,
- __rte_unused uint8_t port,
+static void elink_save_spirom_version(struct bnx2x_softc *sc, uint8_t port,
uint32_t spirom_ver, uint32_t ver_addr)
{
- PMD_DRV_LOG(DEBUG, sc, "FW version 0x%x:0x%x for port %d",
- (uint16_t) (spirom_ver >> 16), (uint16_t) spirom_ver, port);
+ ELINK_DEBUG_P3(sc, "FW version 0x%x:0x%x for port %d",
+ (uint16_t)(spirom_ver >> 16), (uint16_t)spirom_ver, port);
if (ver_addr)
REG_WR(sc, ver_addr, spirom_ver);
}
static void elink_save_bnx2x_spirom_ver(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t port)
+ struct elink_phy *phy,
+ uint8_t port)
{
uint16_t fw_ver1, fw_ver2;
@@ -6538,18 +8034,21 @@ static void elink_save_bnx2x_spirom_ver(struct bnx2x_softc *sc,
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER2, &fw_ver2);
- elink_save_spirom_version(sc, port,
- (uint32_t) (fw_ver1 << 16 | fw_ver2),
+ elink_save_spirom_version(sc, port, (uint32_t)(fw_ver1 << 16 | fw_ver2),
phy->ver_addr);
}
static void elink_ext_phy_10G_an_resolve(struct bnx2x_softc *sc,
- struct elink_phy *phy,
- struct elink_vars *vars)
+ struct elink_phy *phy,
+ struct elink_vars *vars)
{
uint16_t val;
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val);
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val);
+ elink_cl45_read(sc, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_STATUS, &val);
+ elink_cl45_read(sc, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_STATUS, &val);
if (val & (1 << 5))
vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
if ((val & (1 << 0)) == 0)
@@ -6573,8 +8072,8 @@ static void elink_8073_resolve_fc(struct elink_phy *phy,
if (elink_ext_phy_resolve_fc(phy, params, vars) &&
(vars->flow_ctrl == ELINK_FLOW_CTRL_NONE)) {
uint16_t pause_result;
- uint16_t ld_pause; /* local */
- uint16_t lp_pause; /* link partner */
+ uint16_t ld_pause; /* local */
+ uint16_t lp_pause; /* link partner */
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_CL37_FC_LD, &ld_pause);
@@ -6587,31 +8086,35 @@ static void elink_8073_resolve_fc(struct elink_phy *phy,
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
- elink_pause_resolve(vars, pause_result);
- PMD_DRV_LOG(DEBUG, sc, "Ext PHY CL37 pause result 0x%x",
- pause_result);
+ elink_pause_resolve(phy, params, vars, pause_result);
+ ELINK_DEBUG_P1(sc, "Ext PHY CL37 pause result 0x%x",
+ pause_result);
}
}
-
static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
- struct elink_phy *phy,
- uint8_t port)
+ struct elink_phy *phy,
+ uint8_t port)
{
uint32_t count = 0;
- uint16_t fw_ver1 = 0, fw_msgout;
+ uint16_t fw_ver1, fw_msgout;
elink_status_t rc = ELINK_STATUS_OK;
/* Boot port from external ROM */
/* EDC grst */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_GEN_CTRL,
+ 0x0001);
/* Ucode reboot and rst */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x008c);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_GEN_CTRL,
+ 0x008c);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_MISC_CTRL1, 0x0001);
/* Reset internal microprocessor */
elink_cl45_write(sc, phy,
@@ -6632,10 +8135,10 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
do {
count++;
if (count > 300) {
- PMD_DRV_LOG(DEBUG, sc,
- "elink_8073_8727_external_rom_boot port %x:"
- "Download failed. fw version = 0x%x",
- port, fw_ver1);
+ ELINK_DEBUG_P2(sc,
+ "elink_8073_8727_external_rom_boot port %x:"
+ "Download failed. fw version = 0x%x",
+ port, fw_ver1);
rc = ELINK_STATUS_ERROR;
break;
}
@@ -6649,17 +8152,19 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
DELAY(1000 * 1);
} while (fw_ver1 == 0 || fw_ver1 == 0x4321 ||
- ((fw_msgout & 0xff) != 0x03 && (phy->type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073)));
+ ((fw_msgout & 0xff) != 0x03 && (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073)));
/* Clear ser_boot_ctl bit */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_MISC_CTRL1, 0x0000);
elink_save_bnx2x_spirom_ver(sc, phy, port);
- PMD_DRV_LOG(DEBUG, sc,
- "elink_8073_8727_external_rom_boot port %x:"
- "Download complete. fw version = 0x%x", port, fw_ver1);
+ ELINK_DEBUG_P2(sc,
+ "elink_8073_8727_external_rom_boot port %x:"
+ "Download complete. fw version = 0x%x",
+ port, fw_ver1);
return rc;
}
@@ -6673,22 +8178,25 @@ static elink_status_t elink_8073_is_snr_needed(struct bnx2x_softc *sc,
/* This is only required for 8073A1, version 102 only */
uint16_t val;
- /* Read 8073 HW revision */
+ /* Read 8073 HW revision*/
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_CHIP_REV, &val);
if (val != 1) {
/* No need to workaround in 8073 A1 */
return ELINK_STATUS_OK;
}
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &val);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2, &val);
/* SNR should be applied only for version 0x102 */
if (val != 0x102)
return ELINK_STATUS_OK;
- return ELINK_STATUS_ERROR;
+ return 1;
}
static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
@@ -6697,7 +8205,8 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
uint16_t val, cnt, cnt1;
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_CHIP_REV, &val);
if (val > 0) {
/* No need to workaround in 8073 A1 */
@@ -6712,16 +8221,17 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
for (cnt = 0; cnt < 1000; cnt++) {
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &val);
- /* If bit [14] = 0 or bit [13] = 0, continue on with
- * system initialization (XAUI work-around not required, as
- * these bits indicate 2.5G or 1G link up).
- */
+ MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+ &val);
+ /* If bit [14] = 0 or bit [13] = 0, continue on with
+ * system initialization (XAUI work-around not required, as
+ * these bits indicate 2.5G or 1G link up).
+ */
if (!(val & (1 << 14)) || !(val & (1 << 13))) {
- PMD_DRV_LOG(DEBUG, sc, "XAUI work-around not required");
+ ELINK_DEBUG_P0(sc, "XAUI work-around not required");
return ELINK_STATUS_OK;
} else if (!(val & (1 << 15))) {
- PMD_DRV_LOG(DEBUG, sc, "bit 15 went off");
+ ELINK_DEBUG_P0(sc, "bit 15 went off");
/* If bit 15 is 0, then poll Dev1, Reg $C841 until it's
* MSB (bit15) goes to 1 (indicating that the XAUI
* workaround has completed), then continue on with
@@ -6729,12 +8239,11 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
*/
for (cnt1 = 0; cnt1 < 1000; cnt1++) {
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8073_XAUI_WA,
- &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_XAUI_WA, &val);
if (val & (1 << 15)) {
- PMD_DRV_LOG(DEBUG, sc,
- "XAUI workaround has completed");
+ ELINK_DEBUG_P0(sc,
+ "XAUI workaround has completed");
return ELINK_STATUS_OK;
}
DELAY(1000 * 3);
@@ -6743,19 +8252,21 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
}
DELAY(1000 * 3);
}
- PMD_DRV_LOG(DEBUG, sc, "Warning: XAUI work-around timeout !!!");
+ ELINK_DEBUG_P0(sc, "Warning: XAUI work-around timeout !!!");
return ELINK_STATUS_ERROR;
}
static void elink_807x_force_10G(struct bnx2x_softc *sc, struct elink_phy *phy)
{
/* Force KR or KX */
- elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0000);
- elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000);
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0000);
+ elink_cl45_write(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000);
}
static void elink_8073_set_pause_cl37(struct elink_params *params,
@@ -6771,21 +8282,22 @@ static void elink_8073_set_pause_cl37(struct elink_params *params,
/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
- cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+ cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
}
if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
- cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
}
if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
}
- PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize cl37 0x%x", cl37_val);
+ ELINK_DEBUG_P1(sc,
+ "Ext phy AN advertize cl37 0x%x", cl37_val);
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val);
@@ -6803,31 +8315,31 @@ static void elink_8073_specific_func(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
(1 << 2));
- elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
- 0x0004);
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004);
break;
}
}
static uint8_t elink_8073_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val = 0, tmp1;
uint8_t gpio_port;
- PMD_DRV_LOG(DEBUG, sc, "Init 8073");
+ ELINK_DEBUG_P0(sc, "Init 8073");
if (CHIP_IS_E2(sc))
gpio_port = SC_PATH(sc);
else
gpio_port = params->port;
- /* Restore normal power mode */
+ /* Restore normal power mode*/
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);
elink_8073_specific_func(phy, params, ELINK_PHY_INIT);
elink_8073_set_pause_cl37(params, phy, vars);
@@ -6835,14 +8347,15 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
- PMD_DRV_LOG(DEBUG, sc, "Before rom RX_ALARM(port1): 0x%x", tmp1);
+ ELINK_DEBUG_P1(sc, "Before rom RX_ALARM(port1): 0x%x", tmp1);
/* Swap polarity if required - Must be done only in non-1G mode */
if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
/* Configure the 8073 to swap _P and _N of the KR lines */
- PMD_DRV_LOG(DEBUG, sc, "Swapping polarity for the 8073");
+ ELINK_DEBUG_P0(sc, "Swapping polarity for the 8073");
/* 10G Rx/Tx and 1G Tx signal polarity swap */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
@@ -6853,31 +8366,33 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
(val | (3 << 9)));
}
+
/* Enable CL37 BAM */
if (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- default_cfg)) &
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
elink_cl45_read(sc, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, &val);
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, &val);
elink_cl45_write(sc, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, val | 1);
- PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR");
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8073_BAM, val | 1);
+ ELINK_DEBUG_P0(sc, "Enable CL37 BAM on KR");
}
if (params->loopback_mode == ELINK_LOOPBACK_EXT) {
elink_807x_force_10G(sc, phy);
- PMD_DRV_LOG(DEBUG, sc, "Forced speed 10G on 807X");
+ ELINK_DEBUG_P0(sc, "Forced speed 10G on 807X");
return ELINK_STATUS_OK;
} else {
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0002);
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0002);
}
if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) {
if (phy->req_line_speed == ELINK_SPEED_10000) {
val = (1 << 7);
- } else if (phy->req_line_speed == ELINK_SPEED_2500) {
+ } else if (phy->req_line_speed == ELINK_SPEED_2500) {
val = (1 << 5);
/* Note that 2.5G works only when used with 1G
* advertisement
@@ -6886,15 +8401,16 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
val = (1 << 5);
} else {
val = 0;
- if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
val |= (1 << 7);
/* Note that 2.5G works only when used with 1G advertisement */
if (phy->speed_cap_mask &
- (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
- PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
val |= (1 << 5);
- PMD_DRV_LOG(DEBUG, sc, "807x autoneg val = 0x%x", val);
+ ELINK_DEBUG_P1(sc, "807x autoneg val = 0x%x", val);
}
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val);
@@ -6908,13 +8424,13 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV,
&phy_ver);
- PMD_DRV_LOG(DEBUG, sc, "Add 2.5G");
+ ELINK_DEBUG_P0(sc, "Add 2.5G");
if (phy_ver > 0)
tmp1 |= 1;
else
tmp1 &= 0xfffe;
} else {
- PMD_DRV_LOG(DEBUG, sc, "Disable 2.5G");
+ ELINK_DEBUG_P0(sc, "Disable 2.5G");
tmp1 &= 0xfffe;
}
@@ -6948,14 +8464,14 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
/* Restart autoneg */
DELAY(1000 * 500);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
- PMD_DRV_LOG(DEBUG, sc, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x",
- ((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0));
+ ELINK_DEBUG_P2(sc, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x",
+ ((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0));
return ELINK_STATUS_OK;
}
static uint8_t elink_8073_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t link_up = 0;
@@ -6963,33 +8479,41 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
uint16_t link_status = 0;
uint16_t an1000_status = 0;
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, sc, "8703 LASI status 0x%x", val1);
+ ELINK_DEBUG_P1(sc, "8703 LASI status 0x%x", val1);
/* Clear the interrupt LASI status register */
- elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
- elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, sc, "807x PCS status 0x%x->0x%x", val2, val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1);
+ ELINK_DEBUG_P2(sc, "807x PCS status 0x%x->0x%x", val2, val1);
/* Clear MSG-OUT */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1);
/* Check the LASI */
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
- PMD_DRV_LOG(DEBUG, sc, "KR 0x9003 0x%x", val2);
+ ELINK_DEBUG_P1(sc, "KR 0x9003 0x%x", val2);
/* Check the link status */
- elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
- PMD_DRV_LOG(DEBUG, sc, "KR PCS status 0x%x", val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
+ ELINK_DEBUG_P1(sc, "KR PCS status 0x%x", val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
link_up = ((val1 & 4) == 4);
- PMD_DRV_LOG(DEBUG, sc, "PMA_REG_STATUS=0x%x", val1);
+ ELINK_DEBUG_P1(sc, "PMA_REG_STATUS=0x%x", val1);
- if (link_up && ((phy->req_line_speed != ELINK_SPEED_10000))) {
+ if (link_up &&
+ ((phy->req_line_speed != ELINK_SPEED_10000))) {
if (elink_8073_xaui_wa(sc, phy) != 0)
return 0;
}
@@ -6999,10 +8523,12 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status);
/* Check the link status on 1.1.2 */
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, sc, "KR PMA status 0x%x->0x%x,"
- "an_link_status=0x%x", val2, val1, an1000_status);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
+ ELINK_DEBUG_P3(sc, "KR PMA status 0x%x->0x%x,"
+ "an_link_status=0x%x", val2, val1, an1000_status);
link_up = (((val1 & 4) == 4) || (an1000_status & (1 << 1)));
if (link_up && elink_8073_is_snr_needed(sc, phy)) {
@@ -7027,27 +8553,28 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_10000;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link up in 10G",
+ params->port);
} else if ((link_status & (1 << 1)) && (!(link_status & (1 << 14)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_2500;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 2.5G",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link up in 2.5G",
+ params->port);
} else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_1000;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link up in 1G",
+ params->port);
} else {
link_up = 0;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link is down",
+ params->port);
}
if (link_up) {
/* Swap polarity if required */
- if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
+ if (params->lane_config &
+ PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
/* Configure the 8073 to swap P and N of the KR lines */
elink_cl45_read(sc, phy,
MDIO_XS_DEVAD,
@@ -7056,15 +8583,16 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
* when it`s in 10G mode.
*/
if (vars->line_speed == ELINK_SPEED_1000) {
- PMD_DRV_LOG(DEBUG, sc, "Swapping 1G polarity for"
- "the 8073");
+ ELINK_DEBUG_P0(sc, "Swapping 1G polarity for"
+ " the 8073");
val1 |= (1 << 3);
} else
val1 &= ~(1 << 3);
elink_cl45_write(sc, phy,
MDIO_XS_DEVAD,
- MDIO_XS_REG_8073_RX_CTRL_PCIE, val1);
+ MDIO_XS_REG_8073_RX_CTRL_PCIE,
+ val1);
}
elink_ext_phy_10G_an_resolve(sc, phy, vars);
elink_8073_resolve_fc(phy, params, vars);
@@ -7077,10 +8605,10 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
if (val1 & (1 << 5))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
if (val1 & (1 << 7))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
}
return link_up;
@@ -7095,25 +8623,25 @@ static void elink_8073_link_reset(__rte_unused struct elink_phy *phy,
gpio_port = SC_PATH(sc);
else
gpio_port = params->port;
- PMD_DRV_LOG(DEBUG, sc, "Setting 8073 port %d into low power mode",
- gpio_port);
+ ELINK_DEBUG_P1(sc, "Setting 8073 port %d into low power mode",
+ gpio_port);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW,
+ gpio_port);
}
/******************************************************************/
/* BNX2X8705 PHY SECTION */
/******************************************************************/
static uint8_t elink_8705_config_init(struct elink_phy *phy,
- struct elink_params *params,
- __rte_unused struct elink_vars
- *vars)
+ struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "init 8705");
- /* Restore normal power mode */
+ ELINK_DEBUG_P0(sc, "init 8705");
+ /* Restore normal power mode*/
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
elink_ext_phy_hw_reset(sc, params->port);
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040);
@@ -7125,36 +8653,40 @@ static uint8_t elink_8705_config_init(struct elink_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100);
- elink_cl45_write(sc, phy, MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1);
+ elink_cl45_write(sc, phy,
+ MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1);
/* BNX2X8705 doesn't have microcode, hence the 0 */
elink_save_spirom_version(sc, params->port, params->shmem_base, 0);
return ELINK_STATUS_OK;
}
static uint8_t elink_8705_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
uint8_t link_up = 0;
uint16_t val1, rx_sd;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "read status 8705");
+ ELINK_DEBUG_P0(sc, "read status 8705");
elink_cl45_read(sc, phy,
- MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1);
+ MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
+ ELINK_DEBUG_P1(sc, "8705 LASI status 0x%x", val1);
elink_cl45_read(sc, phy,
- MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1);
+ MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
+ ELINK_DEBUG_P1(sc, "8705 LASI status 0x%x", val1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, 0xc809, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, 0xc809, &val1);
- PMD_DRV_LOG(DEBUG, sc, "8705 1.c809 val=0x%x", val1);
- link_up = ((rx_sd & 0x1) && (val1 & (1 << 9))
- && ((val1 & (1 << 8)) == 0));
+ ELINK_DEBUG_P1(sc, "8705 1.c809 val=0x%x", val1);
+ link_up = ((rx_sd & 0x1) && (val1 & (1 << 9)) &&
+ ((val1 & (1 << 8)) == 0));
if (link_up) {
vars->line_speed = ELINK_SPEED_10000;
elink_ext_phy_resolve_fc(phy, params, vars);
@@ -7175,17 +8707,17 @@ static void elink_set_disable_pmd_transmit(struct elink_params *params,
*/
if (pmd_dis) {
if (params->feature_config_flags &
- ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) {
- PMD_DRV_LOG(DEBUG, sc, "Disabling PMD transmitter");
+ ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) {
+ ELINK_DEBUG_P0(sc, "Disabling PMD transmitter");
} else {
- PMD_DRV_LOG(DEBUG, sc, "NOT disabling PMD transmitter");
+ ELINK_DEBUG_P0(sc, "NOT disabling PMD transmitter");
return;
}
- } else {
- PMD_DRV_LOG(DEBUG, sc, "Enabling PMD transmitter");
- }
+ } else
+ ELINK_DEBUG_P0(sc, "Enabling PMD transmitter");
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, pmd_dis);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_DISABLE, pmd_dis);
}
static uint8_t elink_get_gpio_port(struct elink_params *params)
@@ -7193,37 +8725,38 @@ static uint8_t elink_get_gpio_port(struct elink_params *params)
uint8_t gpio_port;
uint32_t swap_val, swap_override;
struct bnx2x_softc *sc = params->sc;
- if (CHIP_IS_E2(sc)) {
+ if (CHIP_IS_E2(sc))
gpio_port = SC_PATH(sc);
- } else {
+ else
gpio_port = params->port;
- }
swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
return gpio_port ^ (swap_val && swap_override);
}
static void elink_sfp_e1e2_set_transmitter(struct elink_params *params,
- struct elink_phy *phy, uint8_t tx_en)
+ struct elink_phy *phy,
+ uint8_t tx_en)
{
uint16_t val;
uint8_t port = params->port;
struct bnx2x_softc *sc = params->sc;
uint32_t tx_en_mode;
- /* Disable/Enable transmitter ( TX laser of the SFP+ module.) */
+ /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/
tx_en_mode = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
dev_info.port_hw_config[port].sfp_ctrl)) &
- PORT_HW_CFG_TX_LASER_MASK;
- PMD_DRV_LOG(DEBUG, sc, "Setting transmitter tx_en=%x for port %x "
- "mode = %x", tx_en, port, tx_en_mode);
+ PORT_HW_CFG_TX_LASER_MASK;
+ ELINK_DEBUG_P3(sc, "Setting transmitter tx_en=%x for port %x "
+ "mode = %x", tx_en, port, tx_en_mode);
switch (tx_en_mode) {
case PORT_HW_CFG_TX_LASER_MDIO:
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_PHY_IDENTIFIER, &val);
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ &val);
if (tx_en)
val &= ~(1 << 15);
@@ -7232,37 +8765,38 @@ static void elink_sfp_e1e2_set_transmitter(struct elink_params *params,
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_PHY_IDENTIFIER, val);
- break;
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ val);
+ break;
case PORT_HW_CFG_TX_LASER_GPIO0:
case PORT_HW_CFG_TX_LASER_GPIO1:
case PORT_HW_CFG_TX_LASER_GPIO2:
case PORT_HW_CFG_TX_LASER_GPIO3:
- {
- uint16_t gpio_pin;
- uint8_t gpio_port, gpio_mode;
- if (tx_en)
- gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH;
- else
- gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW;
+ {
+ uint16_t gpio_pin;
+ uint8_t gpio_port, gpio_mode;
+ if (tx_en)
+ gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH;
+ else
+ gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW;
- gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0;
- gpio_port = elink_get_gpio_port(params);
- elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
- break;
- }
+ gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0;
+ gpio_port = elink_get_gpio_port(params);
+ elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
+ break;
+ }
default:
- PMD_DRV_LOG(DEBUG, sc,
- "Invalid TX_LASER_MDIO 0x%x", tx_en_mode);
+ ELINK_DEBUG_P1(sc, "Invalid TX_LASER_MDIO 0x%x", tx_en_mode);
break;
}
}
static void elink_sfp_set_transmitter(struct elink_params *params,
- struct elink_phy *phy, uint8_t tx_en)
+ struct elink_phy *phy,
+ uint8_t tx_en)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ transmitter to %d", tx_en);
+ ELINK_DEBUG_P1(sc, "Setting SFP+ transmitter to %d", tx_en);
if (CHIP_IS_E3(sc))
elink_sfp_e3_set_transmitter(params, phy, tx_en);
else
@@ -7270,20 +8804,17 @@ static void elink_sfp_set_transmitter(struct elink_params *params,
}
static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
- struct elink_params
- *params,
- uint8_t dev_addr,
- uint16_t addr,
- uint8_t byte_cnt,
- uint8_t * o_buf,
- __rte_unused uint8_t
- is_init)
+ struct elink_params *params,
+ uint8_t dev_addr, uint16_t addr,
+ uint8_t byte_cnt,
+ uint8_t *o_buf, __rte_unused uint8_t is_init)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val = 0;
uint16_t i;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf");
+ ELINK_DEBUG_P0(sc,
+ "Reading from eeprom is limited to 0xf");
return ELINK_STATUS_ERROR;
}
/* Set the read command byte count */
@@ -7313,10 +8844,10 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
}
if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
- MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
- PMD_DRV_LOG(DEBUG, sc,
- "Got bad status 0x%x when reading from SFP+ EEPROM",
- (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
+ ELINK_DEBUG_P1(sc,
+ "Got bad status 0x%x when reading from SFP+ EEPROM",
+ (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
return ELINK_STATUS_ERROR;
}
@@ -7325,8 +8856,8 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val);
- o_buf[i] =
- (uint8_t) (val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK);
+ o_buf[i] = (uint8_t)
+ (val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK);
}
for (i = 0; i < 100; i++) {
@@ -7349,29 +8880,27 @@ static void elink_warpcore_power_module(struct elink_params *params,
pin_cfg = (REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- e3_sfp_ctrl)) & PORT_HW_CFG_E3_PWR_DIS_MASK)
- >> PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+ dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+ PORT_HW_CFG_E3_PWR_DIS_SHIFT;
if (pin_cfg == PIN_CFG_NA)
return;
- PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ module power to %d using pin cfg %d",
- power, pin_cfg);
+ ELINK_DEBUG_P2(sc, "Setting SFP+ module power to %d using pin cfg %d",
+ power, pin_cfg);
/* Low ==> corresponding SFP+ module is powered
* high ==> the SFP+ module is powered down
*/
elink_set_cfg_pin(sc, pin_cfg, power ^ 1);
}
-
-static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
- elink_phy *phy,
- struct elink_params
- *params,
- uint8_t dev_addr,
- uint16_t addr,
- uint8_t byte_cnt,
- uint8_t * o_buf,
- uint8_t is_init)
+static elink_status_t elink_warpcore_read_sfp_module_eeprom(
+ __rte_unused struct elink_phy *phy,
+ struct elink_params *params,
+ uint8_t dev_addr,
+ uint16_t addr,
+ uint8_t byte_cnt,
+ uint8_t *o_buf,
+ uint8_t is_init)
{
elink_status_t rc = ELINK_STATUS_OK;
uint8_t i, j = 0, cnt = 0;
@@ -7380,8 +8909,8 @@ static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
struct bnx2x_softc *sc = params->sc;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG, sc,
- "Reading from eeprom is limited to 16 bytes");
+ ELINK_DEBUG_P0(sc,
+ "Reading from eeprom is limited to 16 bytes");
return ELINK_STATUS_ERROR;
}
@@ -7394,13 +8923,15 @@ static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
DELAY(1000 * 1);
elink_warpcore_power_module(params, 1);
}
- rc = elink_bsc_read(params, sc, dev_addr, addr32, 0, byte_cnt,
+
+ elink_bsc_module_sel(params);
+ rc = elink_bsc_read(sc, dev_addr, addr32, 0, byte_cnt,
data_array);
} while ((rc != ELINK_STATUS_OK) && (++cnt < I2C_WA_RETRY_CNT));
if (rc == ELINK_STATUS_OK) {
for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) {
- o_buf[j] = *((uint8_t *) data_array + i);
+ o_buf[j] = *((uint8_t *)data_array + i);
j++;
}
}
@@ -7409,20 +8940,18 @@ static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
}
static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
- struct elink_params
- *params,
- uint8_t dev_addr,
- uint16_t addr,
- uint8_t byte_cnt,
- uint8_t * o_buf,
- __rte_unused uint8_t
- is_init)
+ struct elink_params *params,
+ uint8_t dev_addr, uint16_t addr,
+ uint8_t byte_cnt,
+ uint8_t *o_buf,
+ __rte_unused uint8_t is_init)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val, i;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf");
+ ELINK_DEBUG_P0(sc,
+ "Reading from eeprom is limited to 0xf");
return ELINK_STATUS_ERROR;
}
@@ -7437,7 +8966,9 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
/* Need to read from 1.8000 to clear it */
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+ &val);
/* Set the read command byte count */
elink_cl45_write(sc, phy,
@@ -7448,16 +8979,19 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
/* Set the read command address */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, addr);
+ MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
+ addr);
/* Set the destination address */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- 0x8004, MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF);
+ 0x8004,
+ MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF);
/* Activate read command */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, 0x8002);
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+ 0x8002);
/* Wait appropriate time for two-wire command to finish before
* polling the status register
*/
@@ -7475,10 +9009,10 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
}
if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
- MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
- PMD_DRV_LOG(DEBUG, sc,
- "Got bad status 0x%x when reading from SFP+ EEPROM",
- (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
+ ELINK_DEBUG_P1(sc,
+ "Got bad status 0x%x when reading from SFP+ EEPROM",
+ (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
return ELINK_STATUS_TIMEOUT;
}
@@ -7487,8 +9021,8 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val);
- o_buf[i] =
- (uint8_t) (val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK);
+ o_buf[i] = (uint8_t)
+ (val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK);
}
for (i = 0; i < 100; i++) {
@@ -7503,22 +9037,18 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
return ELINK_STATUS_ERROR;
}
-
-static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
- struct elink_params *params,
- uint8_t dev_addr,
- uint16_t addr,
- uint16_t byte_cnt,
- uint8_t * o_buf)
+elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
+ struct elink_params *params, uint8_t dev_addr,
+ uint16_t addr, uint16_t byte_cnt,
+ uint8_t *o_buf)
{
- elink_status_t rc = ELINK_STATUS_OK;
+ elink_status_t rc = 0;
+ struct bnx2x_softc *sc = params->sc;
uint8_t xfer_size;
uint8_t *user_data = o_buf;
read_sfp_module_eeprom_func_p read_func;
-
if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) {
- PMD_DRV_LOG(DEBUG, params->sc,
- "invalid dev_addr 0x%x", dev_addr);
+ ELINK_DEBUG_P1(sc, "invalid dev_addr 0x%x", dev_addr);
return ELINK_STATUS_ERROR;
}
@@ -7539,7 +9069,7 @@ static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
while (!rc && (byte_cnt > 0)) {
xfer_size = (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) ?
- ELINK_SFP_EEPROM_PAGE_SIZE : byte_cnt;
+ ELINK_SFP_EEPROM_PAGE_SIZE : byte_cnt;
rc = read_func(phy, params, dev_addr, addr, xfer_size,
user_data, 0);
byte_cnt -= xfer_size;
@@ -7550,91 +9080,105 @@ static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
}
static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
- struct elink_params *params,
- uint16_t * edc_mode)
+ struct elink_params *params,
+ uint16_t *edc_mode)
{
struct bnx2x_softc *sc = params->sc;
uint32_t sync_offset = 0, phy_idx, media_types;
- uint8_t gport, val[2], check_limiting_mode = 0;
+ uint8_t val[ELINK_SFP_EEPROM_FC_TX_TECH_ADDR + 1];
+ uint8_t check_limiting_mode = 0;
*edc_mode = ELINK_EDC_MODE_LIMITING;
phy->media_type = ELINK_ETH_PHY_UNSPECIFIED;
/* First check for copper cable */
if (elink_read_sfp_module_eeprom(phy,
params,
ELINK_I2C_DEV_ADDR_A0,
- ELINK_SFP_EEPROM_CON_TYPE_ADDR,
- 2, (uint8_t *) val) != 0) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to read from SFP+ module EEPROM");
+ 0,
+ ELINK_SFP_EEPROM_FC_TX_TECH_ADDR + 1,
+ (uint8_t *)val) != 0) {
+ ELINK_DEBUG_P0(sc, "Failed to read from SFP+ module EEPROM");
return ELINK_STATUS_ERROR;
}
-
- switch (val[0]) {
+ params->link_attr_sync &= ~LINK_SFP_EEPROM_COMP_CODE_MASK;
+ params->link_attr_sync |= val[ELINK_SFP_EEPROM_10G_COMP_CODE_ADDR] <<
+ LINK_SFP_EEPROM_COMP_CODE_SHIFT;
+ elink_update_link_attr(params, params->link_attr_sync);
+ switch (val[ELINK_SFP_EEPROM_CON_TYPE_ADDR]) {
case ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER:
- {
- uint8_t copper_module_type;
- phy->media_type = ELINK_ETH_PHY_DA_TWINAX;
- /* Check if its active cable (includes SFP+ module)
- * of passive cable
+ {
+ uint8_t copper_module_type;
+ phy->media_type = ELINK_ETH_PHY_DA_TWINAX;
+ /* Check if its active cable (includes SFP+ module)
+ * of passive cable
+ */
+ copper_module_type = val[ELINK_SFP_EEPROM_FC_TX_TECH_ADDR];
+ if (copper_module_type &
+ ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
+ ELINK_DEBUG_P0(sc, "Active Copper cable detected");
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ *edc_mode = ELINK_EDC_MODE_ACTIVE_DAC;
+ else
+ check_limiting_mode = 1;
+ } else {
+ *edc_mode = ELINK_EDC_MODE_PASSIVE_DAC;
+ /* Even in case PASSIVE_DAC indication is not set,
+ * treat it as a passive DAC cable, since some cables
+ * don't have this indication.
*/
- if (elink_read_sfp_module_eeprom(phy,
- params,
- ELINK_I2C_DEV_ADDR_A0,
- ELINK_SFP_EEPROM_FC_TX_TECH_ADDR,
- 1,
- &copper_module_type) !=
- 0) {
- PMD_DRV_LOG(DEBUG, sc,
- "Failed to read copper-cable-type"
- " from SFP+ EEPROM");
- return ELINK_STATUS_ERROR;
- }
-
if (copper_module_type &
- ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
- PMD_DRV_LOG(DEBUG, sc,
- "Active Copper cable detected");
- if (phy->type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
- *edc_mode = ELINK_EDC_MODE_ACTIVE_DAC;
- else
- check_limiting_mode = 1;
- } else if (copper_module_type &
- ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE)
- {
- PMD_DRV_LOG(DEBUG, sc,
- "Passive Copper cable detected");
- *edc_mode = ELINK_EDC_MODE_PASSIVE_DAC;
+ ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
+ ELINK_DEBUG_P0(sc,
+ "Passive Copper cable detected");
} else {
- PMD_DRV_LOG(DEBUG, sc,
- "Unknown copper-cable-type 0x%x !!!",
- copper_module_type);
- return ELINK_STATUS_ERROR;
+ ELINK_DEBUG_P0(sc,
+ "Unknown copper-cable-type");
}
- break;
}
+ break;
+ }
+ case ELINK_SFP_EEPROM_CON_TYPE_VAL_UNKNOWN:
case ELINK_SFP_EEPROM_CON_TYPE_VAL_LC:
case ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45:
check_limiting_mode = 1;
- if ((val[1] & (ELINK_SFP_EEPROM_COMP_CODE_SR_MASK |
- ELINK_SFP_EEPROM_COMP_CODE_LR_MASK |
- ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) {
- PMD_DRV_LOG(DEBUG, sc, "1G SFP module detected");
- gport = params->port;
+ /* Module is considered as 1G in case it's NOT compliant with
+ * any 10G ethernet protocol, but is 1G Ethernet compliant.
+ */
+ if (((val[ELINK_SFP_EEPROM_10G_COMP_CODE_ADDR] &
+ (ELINK_SFP_EEPROM_10G_COMP_CODE_SR_MASK |
+ ELINK_SFP_EEPROM_10G_COMP_CODE_LR_MASK |
+ ELINK_SFP_EEPROM_10G_COMP_CODE_LRM_MASK)) == 0) &&
+ (val[ELINK_SFP_EEPROM_1G_COMP_CODE_ADDR] != 0)) {
+ ELINK_DEBUG_P0(sc, "1G SFP module detected");
phy->media_type = ELINK_ETH_PHY_SFP_1G_FIBER;
if (phy->req_line_speed != ELINK_SPEED_1000) {
+ uint8_t gport = params->port;
phy->req_line_speed = ELINK_SPEED_1000;
if (!CHIP_IS_E1x(sc)) {
gport = SC_PATH(sc) +
- (params->port << 1);
+ (params->port << 1);
}
- elink_cb_event_log(sc, ELINK_LOG_ID_NON_10G_MODULE, gport); //"Warning: Link speed was forced to 1000Mbps."
- // " Current SFP module in port %d is not"
- // " compliant with 10G Ethernet",
+ elink_cb_event_log(sc,
+ ELINK_LOG_ID_NON_10G_MODULE,
+ gport);
+ /*"Warning: Link speed was forced to 1000Mbps."
+ *" Current SFP module in port %d is not"
+ *" compliant with 10G Ethernet",
+ */
+ }
+ if (val[ELINK_SFP_EEPROM_1G_COMP_CODE_ADDR] &
+ ELINK_SFP_EEPROM_1G_COMP_CODE_BASE_T) {
+ /* Some 1G-baseT modules will not link up,
+ * unless TX_EN is toggled with long delay in
+ * between.
+ */
+ elink_sfp_set_transmitter(params, phy, 0);
+ DELAY(1000 * 40);
+ elink_sfp_set_transmitter(params, phy, 1);
}
} else {
int idx, cfg_idx = 0;
- PMD_DRV_LOG(DEBUG, sc, "10G Optic module detected");
+ ELINK_DEBUG_P0(sc, "10G Optic module detected");
for (idx = ELINK_INT_PHY; idx < ELINK_MAX_PHYS; idx++) {
if (params->phy[idx].type == phy->type) {
cfg_idx = ELINK_LINK_CONFIG_IDX(idx);
@@ -7646,24 +9190,22 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
}
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Unable to determine module type 0x%x !!!",
- val[0]);
+ ELINK_DEBUG_P1(sc, "Unable to determine module type 0x%x !!!",
+ val[ELINK_SFP_EEPROM_CON_TYPE_ADDR]);
return ELINK_STATUS_ERROR;
}
sync_offset = params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].media_type);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].media_type);
media_types = REG_RD(sc, sync_offset);
/* Update media type for non-PMF sync */
for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
if (&(params->phy[phy_idx]) == phy) {
media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK <<
- (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
- phy_idx));
- media_types |=
- ((phy->
- media_type & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
- (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
+ (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
+ media_types |= ((phy->media_type &
+ PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
+ (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
break;
}
}
@@ -7676,8 +9218,8 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
ELINK_SFP_EEPROM_OPTIONS_ADDR,
ELINK_SFP_EEPROM_OPTIONS_SIZE,
options) != 0) {
- PMD_DRV_LOG(DEBUG, sc,
- "Failed to read Option field from module EEPROM");
+ ELINK_DEBUG_P0(sc,
+ "Failed to read Option field from module EEPROM");
return ELINK_STATUS_ERROR;
}
if ((options[0] & ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
@@ -7685,15 +9227,14 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
else
*edc_mode = ELINK_EDC_MODE_LIMITING;
}
- PMD_DRV_LOG(DEBUG, sc, "EDC mode is set to 0x%x", *edc_mode);
+ ELINK_DEBUG_P1(sc, "EDC mode is set to 0x%x", *edc_mode);
return ELINK_STATUS_OK;
}
-
/* This function read the relevant field from the module (SFP+), and verify it
* is compliant with this board
*/
static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
- struct elink_params *params)
+ struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
uint32_t val, cmd;
@@ -7702,12 +9243,11 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
char vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE + 1];
phy->flags &= ~ELINK_FLAGS_SFP_NOT_APPROVED;
val = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config[params->port].
- config));
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].config));
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) {
- PMD_DRV_LOG(DEBUG, sc, "NOT enforcing module verification");
+ ELINK_DEBUG_P0(sc, "NOT enforcing module verification");
return ELINK_STATUS_OK;
}
@@ -7717,23 +9257,24 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL;
} else if (params->feature_config_flags &
ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
- /* Use first phy request only in case of non-dual media */
+ /* Use first phy request only in case of non-dual media*/
if (ELINK_DUAL_MEDIA(params)) {
- PMD_DRV_LOG(DEBUG, sc,
- "FW does not support OPT MDL verification");
+ ELINK_DEBUG_P0(sc,
+ "FW does not support OPT MDL verification");
return ELINK_STATUS_ERROR;
}
cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
} else {
/* No support in OPT MDL detection */
- PMD_DRV_LOG(DEBUG, sc, "FW does not support OPT MDL verification");
+ ELINK_DEBUG_P0(sc,
+ "FW does not support OPT MDL verification");
return ELINK_STATUS_ERROR;
}
fw_cmd_param = ELINK_FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl);
fw_resp = elink_cb_fw_command(sc, cmd, fw_cmd_param);
if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
- PMD_DRV_LOG(DEBUG, sc, "Approved module");
+ ELINK_DEBUG_P0(sc, "Approved module");
return ELINK_STATUS_OK;
}
@@ -7743,7 +9284,7 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
ELINK_I2C_DEV_ADDR_A0,
ELINK_SFP_EEPROM_VENDOR_NAME_ADDR,
ELINK_SFP_EEPROM_VENDOR_NAME_SIZE,
- (uint8_t *) vendor_name))
+ (uint8_t *)vendor_name))
vendor_name[0] = '\0';
else
vendor_name[ELINK_SFP_EEPROM_VENDOR_NAME_SIZE] = '\0';
@@ -7752,13 +9293,16 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
ELINK_I2C_DEV_ADDR_A0,
ELINK_SFP_EEPROM_PART_NO_ADDR,
ELINK_SFP_EEPROM_PART_NO_SIZE,
- (uint8_t *) vendor_pn))
+ (uint8_t *)vendor_pn))
vendor_pn[0] = '\0';
else
vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE] = '\0';
- elink_cb_event_log(sc, ELINK_LOG_ID_UNQUAL_IO_MODULE, params->port, vendor_name, vendor_pn); // "Warning: Unqualified SFP+ module detected,"
- // " Port %d from %s part number %s",
+ elink_cb_event_log(sc, ELINK_LOG_ID_UNQUAL_IO_MODULE, params->port,
+ vendor_name, vendor_pn);
+ /* "Warning: Unqualified SFP+ module detected,"
+ * " Port %d from %s part number %s",
+ */
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) !=
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG)
@@ -7766,13 +9310,14 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
return ELINK_STATUS_ERROR;
}
-static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy
- *phy,
- struct elink_params
- *params)
+static elink_status_t elink_wait_for_sfp_module_initialized(
+ struct elink_phy *phy,
+ struct elink_params *params)
+
{
uint8_t val;
elink_status_t rc;
+ struct bnx2x_softc *sc = params->sc;
uint16_t timeout;
/* Initialization time after hot-plug may take up to 300ms for
* some phys type ( e.g. JDSU )
@@ -7780,18 +9325,17 @@ static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy
for (timeout = 0; timeout < 60; timeout++) {
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
- rc = elink_warpcore_read_sfp_module_eeprom(phy, params,
- ELINK_I2C_DEV_ADDR_A0,
- 1, 1, &val,
- 1);
+ rc = elink_warpcore_read_sfp_module_eeprom(
+ phy, params, ELINK_I2C_DEV_ADDR_A0, 1, 1, &val,
+ 1);
else
rc = elink_read_sfp_module_eeprom(phy, params,
ELINK_I2C_DEV_ADDR_A0,
1, 1, &val);
if (rc == 0) {
- PMD_DRV_LOG(DEBUG, params->sc,
- "SFP+ module initialization took %d ms",
- timeout * 5);
+ ELINK_DEBUG_P1(sc,
+ "SFP+ module initialization took %d ms",
+ timeout * 5);
return ELINK_STATUS_OK;
}
DELAY(1000 * 5);
@@ -7802,8 +9346,8 @@ static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy
}
static void elink_8727_power_module(struct bnx2x_softc *sc,
- struct elink_phy *phy, uint8_t is_power_up)
-{
+ struct elink_phy *phy,
+ uint8_t is_power_up) {
/* Make sure GPIOs are not using for LED mode */
uint16_t val;
/* In the GPIO register, bit 4 is use to determine if the GPIOs are
@@ -7828,30 +9372,33 @@ static void elink_8727_power_module(struct bnx2x_softc *sc,
val = (1 << 1);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_GPIO_CTRL,
+ val);
}
static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc,
- struct elink_phy *phy,
- uint16_t edc_mode)
+ struct elink_phy *phy,
+ uint16_t edc_mode)
{
uint16_t cur_limiting_mode;
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER2, &cur_limiting_mode);
- PMD_DRV_LOG(DEBUG, sc,
- "Current Limiting mode is 0x%x", cur_limiting_mode);
+ MDIO_PMA_REG_ROM_VER2,
+ &cur_limiting_mode);
+ ELINK_DEBUG_P1(sc, "Current Limiting mode is 0x%x",
+ cur_limiting_mode);
if (edc_mode == ELINK_EDC_MODE_LIMITING) {
- PMD_DRV_LOG(DEBUG, sc, "Setting LIMITING MODE");
+ ELINK_DEBUG_P0(sc, "Setting LIMITING MODE");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER2,
ELINK_EDC_MODE_LIMITING);
- } else { /* LRM mode ( default ) */
+ } else { /* LRM mode ( default )*/
- PMD_DRV_LOG(DEBUG, sc, "Setting LRM MODE");
+ ELINK_DEBUG_P0(sc, "Setting LRM MODE");
/* Changing to LRM mode takes quite few seconds. So do it only
* if current mode is limiting (default is LRM)
@@ -7860,27 +9407,35 @@ static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc,
return ELINK_STATUS_OK;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LRM_MODE,
+ 0);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, 0x128);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2,
+ 0x128);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_MISC_CTRL0, 0x4008);
+ MDIO_PMA_REG_MISC_CTRL0,
+ 0x4008);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0xaaaa);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LRM_MODE,
+ 0xaaaa);
}
return ELINK_STATUS_OK;
}
static elink_status_t elink_8727_set_limiting_mode(struct bnx2x_softc *sc,
- struct elink_phy *phy,
- uint16_t edc_mode)
+ struct elink_phy *phy,
+ uint16_t edc_mode)
{
uint16_t phy_identifier;
uint16_t rom_ver2_val;
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_PHY_IDENTIFIER, &phy_identifier);
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ &phy_identifier);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -7888,7 +9443,9 @@ static elink_status_t elink_8727_set_limiting_mode(struct bnx2x_softc *sc,
(phy_identifier & ~(1 << 9)));
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &rom_ver2_val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2,
+ &rom_ver2_val);
/* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -7922,12 +9479,14 @@ static void elink_8727_specific_func(struct elink_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
(1 << 2) | (1 << 5));
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL,
+ 0);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0006);
/* Make MOD_ABS give interrupt on change */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val);
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ &val);
val |= (1 << 12);
if (phy->flags & ELINK_FLAGS_NOC)
val |= (3 << 5);
@@ -7935,29 +9494,27 @@ static void elink_8727_specific_func(struct elink_phy *phy,
* status which reflect SFP+ module over-current
*/
if (!(phy->flags & ELINK_FLAGS_NOC))
- val &= 0xff8f; /* Reset bits 4-6 */
+ val &= 0xff8f; /* Reset bits 4-6 */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL,
val);
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Function 0x%x not supported by 8727",
- action);
+ ELINK_DEBUG_P1(sc, "Function 0x%x not supported by 8727",
+ action);
return;
}
}
static void elink_set_e1e2_module_fault_led(struct elink_params *params,
- uint8_t gpio_mode)
+ uint8_t gpio_mode)
{
struct bnx2x_softc *sc = params->sc;
uint32_t fault_led_gpio = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.
- port_hw_config[params->port].
- sfp_ctrl)) &
- PORT_HW_CFG_FAULT_MODULE_LED_MASK;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].sfp_ctrl)) &
+ PORT_HW_CFG_FAULT_MODULE_LED_MASK;
switch (fault_led_gpio) {
case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED:
return;
@@ -7965,19 +9522,19 @@ static void elink_set_e1e2_module_fault_led(struct elink_params *params,
case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1:
case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2:
case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3:
- {
- uint8_t gpio_port = elink_get_gpio_port(params);
- uint16_t gpio_pin = fault_led_gpio -
- PORT_HW_CFG_FAULT_MODULE_LED_GPIO0;
- PMD_DRV_LOG(DEBUG, sc, "Set fault module-detected led "
- "pin %x port %x mode %x",
- gpio_pin, gpio_port, gpio_mode);
- elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
- }
- break;
+ {
+ uint8_t gpio_port = elink_get_gpio_port(params);
+ uint16_t gpio_pin = fault_led_gpio -
+ PORT_HW_CFG_FAULT_MODULE_LED_GPIO0;
+ ELINK_DEBUG_P3(sc, "Set fault module-detected led "
+ "pin %x port %x mode %x",
+ gpio_pin, gpio_port, gpio_mode);
+ elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
+ }
+ break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Error: Invalid fault led mode 0x%x",
- fault_led_gpio);
+ ELINK_DEBUG_P1(sc, "Error: Invalid fault led mode 0x%x",
+ fault_led_gpio);
}
}
@@ -7988,12 +9545,12 @@ static void elink_set_e3_module_fault_led(struct elink_params *params,
uint8_t port = params->port;
struct bnx2x_softc *sc = params->sc;
pin_cfg = (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >>
- PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT;
- PMD_DRV_LOG(DEBUG, sc, "Setting Fault LED to %d using pin cfg %d",
- gpio_mode, pin_cfg);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >>
+ PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT;
+ ELINK_DEBUG_P2(sc, "Setting Fault LED to %d using pin cfg %d",
+ gpio_mode, pin_cfg);
elink_set_cfg_pin(sc, pin_cfg, gpio_mode);
}
@@ -8001,8 +9558,7 @@ static void elink_set_sfp_module_fault_led(struct elink_params *params,
uint8_t gpio_mode)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc,
- "Setting SFP+ module fault LED to %d", gpio_mode);
+ ELINK_DEBUG_P1(sc, "Setting SFP+ module fault LED to %d", gpio_mode);
if (CHIP_IS_E3(sc)) {
/* Low ==> if SFP+ module is supported otherwise
* High ==> if SFP+ module is not on the approved vendor list
@@ -8027,9 +9583,11 @@ static void elink_warpcore_hw_reset(__rte_unused struct elink_phy *phy,
}
static void elink_power_sfp_module(struct elink_params *params,
- struct elink_phy *phy, uint8_t power)
+ struct elink_phy *phy,
+ uint8_t power)
{
- PMD_DRV_LOG(DEBUG, params->sc, "Setting SFP+ power to %x", power);
+ struct bnx2x_softc *sc = params->sc;
+ ELINK_DEBUG_P1(sc, "Setting SFP+ power to %x", power);
switch (phy->type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
@@ -8043,7 +9601,6 @@ static void elink_power_sfp_module(struct elink_params *params,
break;
}
}
-
static void elink_warpcore_set_limiting_mode(struct elink_params *params,
struct elink_phy *phy,
uint16_t edc_mode)
@@ -8052,7 +9609,7 @@ static void elink_warpcore_set_limiting_mode(struct elink_params *params,
uint16_t mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT;
struct bnx2x_softc *sc = params->sc;
- uint8_t lane = elink_get_warpcore_lane(params);
+ uint8_t lane = elink_get_warpcore_lane(phy, params);
/* This is a global register which controls all lanes */
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);
@@ -8085,7 +9642,8 @@ static void elink_warpcore_set_limiting_mode(struct elink_params *params,
}
static void elink_set_limiting_mode(struct elink_params *params,
- struct elink_phy *phy, uint16_t edc_mode)
+ struct elink_phy *phy,
+ uint16_t edc_mode)
{
switch (phy->type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726:
@@ -8101,30 +9659,28 @@ static void elink_set_limiting_mode(struct elink_params *params,
}
}
-static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
- struct elink_params *params)
+elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
+ struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
uint16_t edc_mode;
elink_status_t rc = ELINK_STATUS_OK;
uint32_t val = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config[params->
- port].
- config));
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].config));
/* Enabled transmitter by default */
elink_sfp_set_transmitter(params, phy, 1);
- PMD_DRV_LOG(DEBUG, sc, "SFP+ module plugged in/out detected on port %d",
- params->port);
+ ELINK_DEBUG_P1(sc, "SFP+ module plugged in/out detected on port %d",
+ params->port);
/* Power up module */
elink_power_sfp_module(params, phy, 1);
if (elink_get_edc_mode(phy, params, &edc_mode) != 0) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to get valid module type");
+ ELINK_DEBUG_P0(sc, "Failed to get valid module type");
return ELINK_STATUS_ERROR;
} else if (elink_verify_sfp_module(phy, params) != 0) {
/* Check SFP+ module compatibility */
- PMD_DRV_LOG(DEBUG, sc, "Module verification failed!!");
+ ELINK_DEBUG_P0(sc, "Module verification failed!!");
rc = ELINK_STATUS_ERROR;
/* Turn on fault module-detected led */
elink_set_sfp_module_fault_led(params,
@@ -8132,8 +9688,8 @@ static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
/* Check if need to power down the SFP+ module */
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
- PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) {
- PMD_DRV_LOG(DEBUG, sc, "Shutdown SFP+ module!!");
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) {
+ ELINK_DEBUG_P0(sc, "Shutdown SFP+ module!!");
elink_power_sfp_module(params, phy, 0);
return rc;
}
@@ -8166,22 +9722,22 @@ void elink_handle_module_detect_int(struct elink_params *params)
uint8_t gpio_num, gpio_port;
if (CHIP_IS_E3(sc)) {
phy = &params->phy[ELINK_INT_PHY];
- /* Always enable TX laser,will be disabled in case of fault */
+ /* Always enable TX laser, will be disabled in case of fault */
elink_sfp_set_transmitter(params, phy, 1);
} else {
phy = &params->phy[ELINK_EXT_PHY1];
}
- if (elink_get_mod_abs_int_cfg(sc, params->shmem_base,
+ if (elink_get_mod_abs_int_cfg(sc, params->chip_id, params->shmem_base,
params->port, &gpio_num, &gpio_port) ==
ELINK_STATUS_ERROR) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to get MOD_ABS interrupt config");
+ ELINK_DEBUG_P0(sc, "Failed to get MOD_ABS interrupt config");
return;
}
/* Set valid module led off */
elink_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH);
- /* Get current gpio val reflecting module plugged in / out */
+ /* Get current gpio val reflecting module plugged in / out*/
gpio_val = elink_cb_gpio_read(sc, gpio_num, gpio_port);
/* Call the handling function in case module is detected */
@@ -8191,8 +9747,8 @@ void elink_handle_module_detect_int(struct elink_params *params)
elink_power_sfp_module(params, phy, 1);
elink_cb_gpio_int_write(sc, gpio_num,
- MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
- gpio_port);
+ MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
+ gpio_port);
if (elink_wait_for_sfp_module_initialized(phy, params) == 0) {
elink_sfp_module_detection(phy, params);
if (CHIP_IS_E3(sc)) {
@@ -8214,12 +9770,12 @@ void elink_handle_module_detect_int(struct elink_params *params)
}
}
} else {
- PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized");
+ ELINK_DEBUG_P0(sc, "SFP+ module is not initialized");
}
} else {
elink_cb_gpio_int_write(sc, gpio_num,
- MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
- gpio_port);
+ MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
+ gpio_port);
/* Module was plugged out.
* Disable transmit for this module
*/
@@ -8237,9 +9793,11 @@ static void elink_sfp_mask_fault(struct bnx2x_softc *sc,
{
uint16_t alarm_status, val;
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status);
+ MDIO_PMA_DEVAD, alarm_status_offset,
+ &alarm_status);
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status);
+ MDIO_PMA_DEVAD, alarm_status_offset,
+ &alarm_status);
/* Mask or enable the fault event. */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val);
if (alarm_status & (1 << 0))
@@ -8248,38 +9806,42 @@ static void elink_sfp_mask_fault(struct bnx2x_softc *sc,
val |= (1 << 0);
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val);
}
-
/******************************************************************/
/* common BNX2X8706/BNX2X8726 PHY SECTION */
/******************************************************************/
static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
uint8_t link_up = 0;
uint16_t val1, val2, rx_sd, pcs_status;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "XGXS 8706/8726");
- /* Clear RX Alarm */
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
+ ELINK_DEBUG_P0(sc, "XGXS 8706/8726");
+ /* Clear RX Alarm*/
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT,
MDIO_PMA_LASI_TXCTRL);
- /* Clear LASI indication */
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
- PMD_DRV_LOG(DEBUG, sc,
- "8706/8726 LASI status 0x%x--> 0x%x", val1, val2);
+ /* Clear LASI indication*/
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
+ ELINK_DEBUG_P2(sc, "8706/8726 LASI status 0x%x--> 0x%x", val1, val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
elink_cl45_read(sc, phy,
MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status);
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
- PMD_DRV_LOG(DEBUG, sc, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
- " link_status 0x%x", rx_sd, pcs_status, val2);
+ ELINK_DEBUG_P3(sc, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
+ " link_status 0x%x", rx_sd, pcs_status, val2);
/* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status
* are set, or if the autoneg bit 1 is set
*/
@@ -8296,9 +9858,9 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
/* Capture 10G link fault. Read twice to clear stale value. */
if (vars->line_speed == ELINK_SPEED_10000) {
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_LASI_TXSTAT, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_LASI_TXSTAT, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
if (val1 & (1 << 0))
vars->fault_detected = 1;
}
@@ -8310,15 +9872,15 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
/* BNX2X8706 PHY SECTION */
/******************************************************************/
static uint8_t elink_8706_config_init(struct elink_phy *phy,
- struct elink_params *params,
- __rte_unused struct elink_vars *vars)
+ struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
uint32_t tx_en_mode;
uint16_t cnt, val, tmp1;
struct bnx2x_softc *sc = params->sc;
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
elink_ext_phy_hw_reset(sc, params->port);
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040);
@@ -8332,34 +9894,35 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
break;
DELAY(1000 * 10);
}
- PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 is initialized after %d ms", cnt);
+ ELINK_DEBUG_P1(sc, "XGXS 8706 is initialized after %d ms", cnt);
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
uint8_t i;
uint16_t reg;
for (i = 0; i < 4; i++) {
reg = MDIO_XS_8706_REG_BANK_RX0 +
- i * (MDIO_XS_8706_REG_BANK_RX1 -
- MDIO_XS_8706_REG_BANK_RX0);
+ i * (MDIO_XS_8706_REG_BANK_RX1 -
+ MDIO_XS_8706_REG_BANK_RX0);
elink_cl45_read(sc, phy, MDIO_XS_DEVAD, reg, &val);
/* Clear first 3 bits of the control */
val &= ~0x7;
/* Set control bits according to configuration */
val |= (phy->rx_preemphasis[i] & 0x7);
- PMD_DRV_LOG(DEBUG, sc, "Setting RX Equalizer to BNX2X8706"
- " reg 0x%x <-- val 0x%x", reg, val);
+ ELINK_DEBUG_P2(sc, "Setting RX Equalizer to BNX2X8706"
+ " reg 0x%x <-- val 0x%x", reg, val);
elink_cl45_write(sc, phy, MDIO_XS_DEVAD, reg, val);
}
}
/* Force speed */
if (phy->req_line_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 force 10Gbps");
+ ELINK_DEBUG_P0(sc, "XGXS 8706 force 10Gbps");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_DIGITAL_CTRL, 0x400);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL,
+ 0);
/* Arm LASI for link and Tx fault. */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3);
@@ -8367,7 +9930,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
/* Force 1Gbps using autoneg with 1G advertisement */
/* Allow CL37 through CL73 */
- PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 AutoNeg");
+ ELINK_DEBUG_P0(sc, "XGXS 8706 AutoNeg");
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
@@ -8385,9 +9948,11 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x0400);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
+ 0x0400);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
+ 0x0004);
}
elink_save_bnx2x_spirom_ver(sc, phy, params->port);
@@ -8397,27 +9962,24 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
tx_en_mode = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- sfp_ctrl))
- & PORT_HW_CFG_TX_LASER_MASK;
+ dev_info.port_hw_config[params->port].sfp_ctrl))
+ & PORT_HW_CFG_TX_LASER_MASK;
if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {
- PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS");
+ ELINK_DEBUG_P0(sc, "Enabling TXONOFF_PWRDN_DIS");
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL,
- &tmp1);
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, &tmp1);
tmp1 |= 0x1;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL,
- tmp1);
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, tmp1);
}
return ELINK_STATUS_OK;
}
static uint8_t elink_8706_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
return elink_8706_8726_read_status(phy, params, vars);
}
@@ -8429,7 +9991,7 @@ static void elink_8726_config_loopback(struct elink_phy *phy,
struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "PMA/PMD ext_phy_loopback: 8726");
+ ELINK_DEBUG_P0(sc, "PMA/PMD ext_phy_loopback: 8726");
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001);
}
@@ -8451,7 +10013,8 @@ static void elink_8726_external_rom_boot(struct elink_phy *phy,
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_MISC_CTRL1, 0x0001);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -8463,15 +10026,16 @@ static void elink_8726_external_rom_boot(struct elink_phy *phy,
/* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_MISC_CTRL1, 0x0000);
DELAY(1000 * 200);
elink_save_bnx2x_spirom_ver(sc, phy, params->port);
}
static uint8_t elink_8726_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val1;
@@ -8481,7 +10045,7 @@ static uint8_t elink_8726_read_status(struct elink_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
&val1);
if (val1 & (1 << 15)) {
- PMD_DRV_LOG(DEBUG, sc, "Tx is disabled");
+ ELINK_DEBUG_P0(sc, "Tx is disabled");
link_up = 0;
vars->line_speed = 0;
}
@@ -8489,12 +10053,13 @@ static uint8_t elink_8726_read_status(struct elink_phy *phy,
return link_up;
}
+
static uint8_t elink_8726_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8726");
+ ELINK_DEBUG_P0(sc, "Initializing BNX2X8726");
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
elink_wait_reset_complete(sc, phy, params);
@@ -8509,7 +10074,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
elink_sfp_module_detection(phy, params);
if (phy->req_line_speed == ELINK_SPEED_1000) {
- PMD_DRV_LOG(DEBUG, sc, "Setting 1G force");
+ ELINK_DEBUG_P0(sc, "Setting 1G force");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
elink_cl45_write(sc, phy,
@@ -8517,17 +10082,19 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
+ 0x400);
} else if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) &&
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) &&
((phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37");
+ ELINK_DEBUG_P0(sc, "Setting 1G clause37");
/* Set Flow control */
elink_ext_phy_set_pause(params, phy, vars);
- elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20);
+ elink_cl45_write(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20);
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
elink_cl45_write(sc, phy,
@@ -8535,16 +10102,17 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);
elink_cl45_write(sc, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
+ MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
/* Enable RX-ALARM control to receive interrupt for 1G speed
* change
*/
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
+ 0x400);
- } else { /* Default 10G. Set only LASI control */
+ } else { /* Default 10G. Set only LASI control */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1);
}
@@ -8552,9 +10120,10 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- PMD_DRV_LOG(DEBUG, sc,
- "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
- phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
+ ELINK_DEBUG_P2(sc,
+ "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
+ phy->tx_preemphasis[0],
+ phy->tx_preemphasis[1]);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8726_TX_CTRL1,
@@ -8574,10 +10143,11 @@ static void elink_8726_link_reset(struct elink_phy *phy,
struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "elink_8726_link_reset port %d", params->port);
+ ELINK_DEBUG_P1(sc, "elink_8726_link_reset port %d", params->port);
/* Set serial boot control for external load */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_GEN_CTRL, 0x0001);
}
/******************************************************************/
@@ -8610,22 +10180,28 @@ static void elink_8727_set_link_led(struct elink_phy *phy,
break;
}
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ &val);
val &= 0xff8f;
val |= led_mode_bitmask;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ val);
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_GPIO_CTRL,
+ &val);
val &= 0xffe0;
val |= gpio_pins_bitmask;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_GPIO_CTRL,
+ val);
}
-
static void elink_8727_hw_reset(__rte_unused struct elink_phy *phy,
- struct elink_params *params)
-{
+ struct elink_params *params) {
uint32_t swap_val, swap_override;
uint8_t port;
/* The PHY reset is controlled by GPIO 1. Fake the port number
@@ -8636,7 +10212,7 @@ static void elink_8727_hw_reset(__rte_unused struct elink_phy *phy,
swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
port = (swap_val && swap_override) ^ 1;
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
}
static void elink_8727_config_speed(struct elink_phy *phy,
@@ -8647,14 +10223,14 @@ static void elink_8727_config_speed(struct elink_phy *phy,
/* Set option 1G speed */
if ((phy->req_line_speed == ELINK_SPEED_1000) ||
(phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER)) {
- PMD_DRV_LOG(DEBUG, sc, "Setting 1G force");
+ ELINK_DEBUG_P0(sc, "Setting 1G force");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD);
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
- PMD_DRV_LOG(DEBUG, sc, "1.7 = 0x%x", tmp1);
+ ELINK_DEBUG_P1(sc, "1.7 = 0x%x", tmp1);
/* Power down the XAUI until link is up in case of dual-media
* and 1G
*/
@@ -8671,10 +10247,10 @@ static void elink_8727_config_speed(struct elink_phy *phy,
((phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) &&
((phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37");
+ ELINK_DEBUG_P0(sc, "Setting 1G clause37");
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0);
elink_cl45_write(sc, phy,
@@ -8697,9 +10273,8 @@ static void elink_8727_config_speed(struct elink_phy *phy,
}
static uint8_t elink_8727_config_init(struct elink_phy *phy,
- struct elink_params *params,
- __rte_unused struct elink_vars
- *vars)
+ struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
uint32_t tx_en_mode;
uint16_t tmp1, mod_abs, tmp2;
@@ -8708,7 +10283,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
elink_wait_reset_complete(sc, phy, params);
- PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8727");
+ ELINK_DEBUG_P0(sc, "Initializing BNX2X8727");
elink_8727_specific_func(phy, params, ELINK_PHY_INIT);
/* Initially configure MOD_ABS to interrupt when module is
@@ -8734,15 +10309,18 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
elink_8727_config_speed(phy, params);
+
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- PMD_DRV_LOG(DEBUG, sc, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
- phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
+ ELINK_DEBUG_P2(sc, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
+ phy->tx_preemphasis[0],
+ phy->tx_preemphasis[1]);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1,
phy->tx_preemphasis[0]);
@@ -8757,25 +10335,24 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
*/
tx_en_mode = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- sfp_ctrl))
- & PORT_HW_CFG_TX_LASER_MASK;
+ dev_info.port_hw_config[params->port].sfp_ctrl))
+ & PORT_HW_CFG_TX_LASER_MASK;
if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {
- PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS");
+ ELINK_DEBUG_P0(sc, "Enabling TXONOFF_PWRDN_DIS");
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG,
- &tmp2);
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, &tmp2);
tmp2 |= 0x1000;
tmp2 &= 0xFFEF;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG,
- tmp2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_PHY_IDENTIFIER, &tmp2);
- elink_cl45_write(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_PHY_IDENTIFIER, (tmp2 & 0x7fff));
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
+ &tmp2);
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
+ (tmp2 & 0x7fff));
}
return ELINK_STATUS_OK;
@@ -8787,15 +10364,17 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t mod_abs, rx_alarm_status;
uint32_t val = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config[params->
- port].config));
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
- &mod_abs);
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].
+ config));
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
if (mod_abs & (1 << 8)) {
/* Module is absent */
- PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is absent");
+ ELINK_DEBUG_P0(sc,
+ "MOD_ABS indication show module is absent");
phy->media_type = ELINK_ETH_PHY_NOT_PRESENT;
/* 1. Set mod_abs to detect next module
* presence event
@@ -8820,7 +10399,8 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
} else {
/* Module is present */
- PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is present");
+ ELINK_DEBUG_P0(sc,
+ "MOD_ABS indication show module is present");
/* First disable transmitter, and if the module is ok, the
* module_detection will enable it
* 1. Set mod_abs to detect next module absent event ( bit 8)
@@ -8844,51 +10424,56 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
+
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
elink_sfp_set_transmitter(params, phy, 0);
- if (elink_wait_for_sfp_module_initialized(phy, params) == 0) {
+ if (elink_wait_for_sfp_module_initialized(phy, params) == 0)
elink_sfp_module_detection(phy, params);
- } else {
- PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized");
- }
+ else
+ ELINK_DEBUG_P0(sc, "SFP+ module is not initialized");
/* Reconfigure link speed based on module type limitations */
elink_8727_config_speed(phy, params);
}
- PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
+ ELINK_DEBUG_P1(sc, "8727 RX_ALARM_STATUS 0x%x",
+ rx_alarm_status);
/* No need to check link status in case of module plugged in/out */
}
static uint8_t elink_8727_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
+
{
struct bnx2x_softc *sc = params->sc;
- uint8_t link_up = 0, oc_port = params->port;
+ uint8_t link_up = 0;
uint16_t link_status = 0;
uint16_t rx_alarm_status, lasi_ctrl, val1;
/* If PHY is not initialized, do not check link status */
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, &lasi_ctrl);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
+ &lasi_ctrl);
if (!lasi_ctrl)
return 0;
/* Check the LASI on Rx */
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT,
+ &rx_alarm_status);
vars->line_speed = 0;
- PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
+ ELINK_DEBUG_P1(sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT,
MDIO_PMA_LASI_TXCTRL);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, sc, "8727 LASI status 0x%x", val1);
+ ELINK_DEBUG_P1(sc, "8727 LASI status 0x%x", val1);
/* Clear MSG-OUT */
elink_cl45_read(sc, phy,
@@ -8898,24 +10483,28 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
* for over current
*/
if (!(phy->flags & ELINK_FLAGS_NOC) && !(rx_alarm_status & (1 << 5))) {
- /* Check over-current using 8727 GPIO0 input */
+ /* Check over-current using 8727 GPIO0 input*/
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL,
&val1);
if ((val1 & (1 << 8)) == 0) {
+ uint8_t oc_port = params->port;
if (!CHIP_IS_E1x(sc))
oc_port = SC_PATH(sc) + (params->port << 1);
- PMD_DRV_LOG(DEBUG, sc,
- "8727 Power fault has been detected on port %d",
- oc_port);
- elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, oc_port); //"Error: Power fault on Port %d has "
- // "been detected and the power to "
- // "that SFP+ module has been removed "
- // "to prevent failure of the card. "
- // "Please remove the SFP+ module and "
- // "restart the system to clear this "
- // "error.",
+ ELINK_DEBUG_P1(sc,
+ "8727 Power fault has been detected on port %d",
+ oc_port);
+ elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT,
+ oc_port);
+ /* "Error: Power fault on Port %d has "
+ * "been detected and the power to "
+ * "that SFP+ module has been removed "
+ * "to prevent failure of the card. "
+ * "Please remove the SFP+ module and "
+ * "restart the system to clear this "
+ * "error.",
+ */
/* Disable all RX_ALARMs except for mod_abs */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -8931,14 +10520,13 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
MDIO_PMA_REG_PHY_IDENTIFIER, val1);
/* Clear RX alarm */
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
elink_8727_power_module(params->sc, phy, 0);
return 0;
}
- }
+ } /* Over current check */
- /* Over current check */
/* When module absent bit is set, check module */
if (rx_alarm_status & (1 << 5)) {
elink_8727_handle_mod_abs(phy, params);
@@ -8949,10 +10537,10 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
}
if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
- PMD_DRV_LOG(DEBUG, sc, "Enabling 8727 TX laser");
+ ELINK_DEBUG_P0(sc, "Enabling 8727 TX laser");
elink_sfp_set_transmitter(params, phy, 1);
} else {
- PMD_DRV_LOG(DEBUG, sc, "Tx is disabled");
+ ELINK_DEBUG_P0(sc, "Tx is disabled");
return 0;
}
@@ -8966,26 +10554,26 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_10000;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link up in 10G",
+ params->port);
} else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_1000;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link up in 1G",
+ params->port);
} else {
link_up = 0;
- PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down",
- params->port);
+ ELINK_DEBUG_P1(sc, "port %x: External link is down",
+ params->port);
}
/* Capture 10G link fault. */
if (vars->line_speed == ELINK_SPEED_10000) {
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_LASI_TXSTAT, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_LASI_TXSTAT, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
if (val1 & (1 << 0)) {
vars->fault_detected = 1;
@@ -8995,7 +10583,7 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
if (link_up) {
elink_ext_phy_resolve_fc(phy, params, vars);
vars->duplex = DUPLEX_FULL;
- PMD_DRV_LOG(DEBUG, sc, "duplex = 0x%x", vars->duplex);
+ ELINK_DEBUG_P1(sc, "duplex = 0x%x", vars->duplex);
}
if ((ELINK_DUAL_MEDIA(params)) &&
@@ -9035,8 +10623,16 @@ static void elink_8727_link_reset(struct elink_phy *phy,
/******************************************************************/
/* BNX2X8481/BNX2X84823/BNX2X84833 PHY SECTION */
/******************************************************************/
+static int elink_is_8483x_8485x(struct elink_phy *phy)
+{
+ return ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
+ (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) ||
+ (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858));
+}
+
static void elink_save_848xx_spirom_version(struct elink_phy *phy,
- struct bnx2x_softc *sc, uint8_t port)
+ struct bnx2x_softc *sc,
+ uint8_t port)
{
uint16_t val, fw_ver2, cnt, i;
static struct elink_reg_set reg_set[] = {
@@ -9048,11 +10644,10 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
};
uint16_t fw_ver1;
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
+ if (elink_is_8483x_8485x(phy)) {
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
elink_save_spirom_version(sc, port, fw_ver1 & 0xfff,
- phy->ver_addr);
+ phy->ver_addr);
} else {
/* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */
/* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
@@ -9067,12 +10662,14 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
DELAY(5);
}
if (cnt == 100) {
- PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx "
- "phy fw version(1)");
- elink_save_spirom_version(sc, port, 0, phy->ver_addr);
+ ELINK_DEBUG_P0(sc, "Unable to read 848xx "
+ "phy fw version(1)");
+ elink_save_spirom_version(sc, port, 0,
+ phy->ver_addr);
return;
}
+
/* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
@@ -9084,9 +10681,10 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
DELAY(5);
}
if (cnt == 100) {
- PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx phy fw "
- "version(2)");
- elink_save_spirom_version(sc, port, 0, phy->ver_addr);
+ ELINK_DEBUG_P0(sc, "Unable to read 848xx phy fw "
+ "version(2)");
+ elink_save_spirom_version(sc, port, 0,
+ phy->ver_addr);
return;
}
@@ -9100,8 +10698,8 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
}
}
-
-static void elink_848xx_set_led(struct bnx2x_softc *sc, struct elink_phy *phy)
+static void elink_848xx_set_led(struct bnx2x_softc *sc,
+ struct elink_phy *phy)
{
uint16_t val, offset, i;
static struct elink_reg_set reg_set[] = {
@@ -9110,29 +10708,30 @@ static void elink_848xx_set_led(struct bnx2x_softc *sc, struct elink_phy *phy)
{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, 0x0006},
{MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_BLINK, 0x0000},
{MDIO_PMA_DEVAD, MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH,
- MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ},
+ MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ},
{MDIO_AN_DEVAD, 0xFFFB, 0xFFFD}
};
/* PHYC_CTL_LED_CTL */
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
val &= 0xFE00;
val |= 0x0092;
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL, val);
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834))
+ if (elink_is_8483x_8485x(phy))
offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1;
else
offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1;
- /* stretch_en for LED3 */
+ /* stretch_en for LED3*/
elink_cl45_read_or_write(sc, phy,
MDIO_PMA_DEVAD, offset,
MDIO_PMA_REG_84823_LED3_STRETCH_EN);
@@ -9145,8 +10744,7 @@ static void elink_848xx_specific_func(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
switch (action) {
case ELINK_PHY_INIT:
- if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
+ if (!elink_is_8483x_8485x(phy)) {
/* Save spirom version */
elink_save_848xx_spirom_version(phy, sc, params->port);
}
@@ -9163,14 +10761,15 @@ static void elink_848xx_specific_func(struct elink_phy *phy,
}
static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t autoneg_val, an_1000_val, an_10_100_val;
elink_848xx_specific_func(phy, params, ELINK_PHY_INIT);
- elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000);
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000);
/* set 1000 speed advertisement */
elink_cl45_read(sc, phy,
@@ -9180,24 +10779,25 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
elink_ext_phy_set_pause(params, phy, vars);
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_LEGACY_AN_ADV, &an_10_100_val);
+ MDIO_AN_REG_8481_LEGACY_AN_ADV,
+ &an_10_100_val);
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL,
&autoneg_val);
/* Disable forced speed */
- autoneg_val &=
- ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13));
+ autoneg_val &= ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) |
+ (1 << 13));
an_10_100_val &= ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8));
if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
(phy->req_line_speed == ELINK_SPEED_1000)) {
an_1000_val |= (1 << 8);
autoneg_val |= (1 << 9 | 1 << 12);
if (phy->req_duplex == DUPLEX_FULL)
an_1000_val |= (1 << 9);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 1G");
+ ELINK_DEBUG_P0(sc, "Advertising 1G");
} else
an_1000_val &= ~((1 << 8) | (1 << 9));
@@ -9213,7 +10813,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
*/
autoneg_val |= (1 << 9 | 1 << 12);
an_10_100_val |= (1 << 8);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD");
+ ELINK_DEBUG_P0(sc, "Advertising 100M-FD");
}
if (phy->speed_cap_mask &
@@ -9222,7 +10822,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
*/
autoneg_val |= (1 << 9 | 1 << 12);
an_10_100_val |= (1 << 7);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD");
+ ELINK_DEBUG_P0(sc, "Advertising 100M-HD");
}
if ((phy->speed_cap_mask &
@@ -9230,7 +10830,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(phy->supported & ELINK_SUPPORTED_10baseT_Full)) {
an_10_100_val |= (1 << 6);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD");
+ ELINK_DEBUG_P0(sc, "Advertising 10M-FD");
}
if ((phy->speed_cap_mask &
@@ -9238,14 +10838,15 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(phy->supported & ELINK_SUPPORTED_10baseT_Half)) {
an_10_100_val |= (1 << 5);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD");
+ ELINK_DEBUG_P0(sc, "Advertising 10M-HD");
}
}
/* Only 10/100 are allowed to work in FORCE mode */
if ((phy->req_line_speed == ELINK_SPEED_100) &&
(phy->supported &
- (ELINK_SUPPORTED_100baseT_Half | ELINK_SUPPORTED_100baseT_Full))) {
+ (ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full))) {
autoneg_val |= (1 << 13);
/* Enabled AUTO-MDIX when autoneg is disabled */
elink_cl45_write(sc, phy,
@@ -9253,16 +10854,17 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(1 << 15 | 1 << 9 | 7 << 0));
/* The PHY needs this set even for forced link. */
an_10_100_val |= (1 << 8) | (1 << 7);
- PMD_DRV_LOG(DEBUG, sc, "Setting 100M force");
+ ELINK_DEBUG_P0(sc, "Setting 100M force");
}
if ((phy->req_line_speed == ELINK_SPEED_10) &&
(phy->supported &
- (ELINK_SUPPORTED_10baseT_Half | ELINK_SUPPORTED_10baseT_Full))) {
+ (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full))) {
/* Enabled AUTO-MDIX when autoneg is disabled */
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL,
(1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, sc, "Setting 10M force");
+ ELINK_DEBUG_P0(sc, "Setting 10M force");
}
elink_cl45_write(sc, phy,
@@ -9275,42 +10877,44 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
/* Always write this if this is not 84833/4.
* For 84833/4, write it only when it's a forced speed.
*/
- if (((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) ||
+ if (!elink_is_8483x_8485x(phy) ||
((autoneg_val & (1 << 12)) == 0))
elink_cl45_write(sc, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);
if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(phy->req_line_speed == ELINK_SPEED_10000)) {
- PMD_DRV_LOG(DEBUG, sc, "Advertising 10G");
- /* Restart autoneg for 10G */
+ ELINK_DEBUG_P0(sc, "Advertising 10G");
+ /* Restart autoneg for 10G*/
- elink_cl45_read_or_write(sc, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
- 0x1000);
+ elink_cl45_read_or_write(
+ sc, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
+ 0x1000);
elink_cl45_write(sc, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x3200);
+ MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
+ 0x3200);
} else
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, 1);
+ MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
+ 1);
return ELINK_STATUS_OK;
}
static uint8_t elink_8481_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
- /* Restore normal power mode */
+ /* Restore normal power mode*/
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
elink_ext_phy_hw_reset(sc, params->port);
@@ -9320,101 +10924,219 @@ static uint8_t elink_8481_config_init(struct elink_phy *phy,
return elink_848xx_cmn_config_init(phy, params, vars);
}
-#define PHY84833_CMDHDLR_WAIT 300
-#define PHY84833_CMDHDLR_MAX_ARGS 5
-static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy,
+#define PHY848xx_CMDHDLR_WAIT 300
+#define PHY848xx_CMDHDLR_MAX_ARGS 5
+
+static elink_status_t elink_84858_cmd_hdlr(struct elink_phy *phy,
struct elink_params *params,
- uint16_t fw_cmd, uint16_t cmd_args[],
- int argc)
+ uint16_t fw_cmd,
+ uint16_t cmd_args[], int argc)
{
int idx;
uint16_t val;
struct bnx2x_softc *sc = params->sc;
+
+ /* Step 1: Poll the STATUS register to see whether the previous command
+ * is in progress or the system is busy (CMD_IN_PROGRESS or
+ * SYSTEM_BUSY). If previous command is in progress or system is busy,
+ * check again until the previous command finishes execution and the
+ * system is available for taking command
+ */
+
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
+ elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
+ if ((val != PHY84858_STATUS_CMD_IN_PROGRESS) &&
+ (val != PHY84858_STATUS_CMD_SYSTEM_BUSY))
+ break;
+ DELAY(1000 * 1);
+ }
+ if (idx >= PHY848xx_CMDHDLR_WAIT) {
+ ELINK_DEBUG_P0(sc, "FW cmd: FW not ready.");
+ return ELINK_STATUS_ERROR;
+ }
+
+ /* Step2: If any parameters are required for the function, write them
+ * to the required DATA registers
+ */
+
+ for (idx = 0; idx < argc; idx++) {
+ elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
+ cmd_args[idx]);
+ }
+
+ /* Step3: When the firmware is ready for commands, write the 'Command
+ * code' to the CMD register
+ */
+ elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
+
+ /* Step4: Once the command has been written, poll the STATUS register
+ * to check whether the command has completed (CMD_COMPLETED_PASS/
+ * CMD_FOR_CMDS or CMD_COMPLETED_ERROR).
+ */
+
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
+ elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
+ if ((val == PHY84858_STATUS_CMD_COMPLETE_PASS) ||
+ (val == PHY84858_STATUS_CMD_COMPLETE_ERROR))
+ break;
+ DELAY(1000 * 1);
+ }
+ if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
+ (val == PHY84858_STATUS_CMD_COMPLETE_ERROR)) {
+ ELINK_DEBUG_P0(sc, "FW cmd failed.");
+ return ELINK_STATUS_ERROR;
+ }
+ /* Step5: Once the command has completed, read the specficied DATA
+ * registers for any saved results for the command, if applicable
+ */
+
+ /* Gather returning data */
+ for (idx = 0; idx < argc; idx++) {
+ elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
+ &cmd_args[idx]);
+ }
+
+ return ELINK_STATUS_OK;
+}
+
+static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy,
+ struct elink_params *params, uint16_t fw_cmd,
+ uint16_t cmd_args[], int argc, int process)
+{
+ int idx;
+ uint16_t val;
+ struct bnx2x_softc *sc = params->sc;
+ elink_status_t rc = ELINK_STATUS_OK;
+
+ if (process == PHY84833_MB_PROCESS2) {
/* Write CMD_OPEN_OVERRIDE to STATUS reg */
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS,
- PHY84833_STATUS_CMD_OPEN_OVERRIDE);
- for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
+ MDIO_848xx_CMD_HDLR_STATUS,
+ PHY84833_STATUS_CMD_OPEN_OVERRIDE);
+ }
+
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS, &val);
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS)
break;
DELAY(1000 * 1);
}
- if (idx >= PHY84833_CMDHDLR_WAIT) {
- PMD_DRV_LOG(DEBUG, sc, "FW cmd: FW not ready.");
+ if (idx >= PHY848xx_CMDHDLR_WAIT) {
+ ELINK_DEBUG_P0(sc, "FW cmd: FW not ready.");
+ /* if the status is CMD_COMPLETE_PASS or CMD_COMPLETE_ERROR
+ * clear the status to CMD_CLEAR_COMPLETE
+ */
+ if (val == PHY84833_STATUS_CMD_COMPLETE_PASS ||
+ val == PHY84833_STATUS_CMD_COMPLETE_ERROR) {
+ elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_STATUS,
+ PHY84833_STATUS_CMD_CLEAR_COMPLETE);
+ }
return ELINK_STATUS_ERROR;
}
-
- /* Prepare argument(s) and issue command */
+ if (process == PHY84833_MB_PROCESS1 ||
+ process == PHY84833_MB_PROCESS2) {
+ /* Prepare argument(s) */
for (idx = 0; idx < argc; idx++) {
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_DATA1 + idx,
- cmd_args[idx]);
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
+ cmd_args[idx]);
+ }
}
+
+ /* Issue command */
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_COMMAND, fw_cmd);
- for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
+ MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS, &val);
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) ||
- (val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
+ (val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
break;
DELAY(1000 * 1);
}
- if ((idx >= PHY84833_CMDHDLR_WAIT) ||
- (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
- PMD_DRV_LOG(DEBUG, sc, "FW cmd failed.");
- return ELINK_STATUS_ERROR;
+ if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
+ (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
+ ELINK_DEBUG_P0(sc, "FW cmd failed.");
+ rc = ELINK_STATUS_ERROR;
}
+ if (process == PHY84833_MB_PROCESS3 && rc == ELINK_STATUS_OK) {
/* Gather returning data */
for (idx = 0; idx < argc; idx++) {
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_DATA1 + idx,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
&cmd_args[idx]);
}
+ }
+ if (val == PHY84833_STATUS_CMD_COMPLETE_ERROR ||
+ val == PHY84833_STATUS_CMD_COMPLETE_PASS) {
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS,
- PHY84833_STATUS_CMD_CLEAR_COMPLETE);
- return ELINK_STATUS_OK;
+ MDIO_848xx_CMD_HDLR_STATUS,
+ PHY84833_STATUS_CMD_CLEAR_COMPLETE);
+ }
+ return rc;
}
-static elink_status_t elink_84833_pair_swap_cfg(struct elink_phy *phy,
- struct elink_params *params,
- __rte_unused struct elink_vars
- *vars)
+static elink_status_t elink_848xx_cmd_hdlr(struct elink_phy *phy,
+ struct elink_params *params,
+ uint16_t fw_cmd,
+ uint16_t cmd_args[], int argc,
+ int process)
+{
+ struct bnx2x_softc *sc = params->sc;
+
+ if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858) ||
+ (REG_RD(sc, params->shmem2_base +
+ offsetof(struct shmem2_region,
+ link_attr_sync[params->port])) &
+ LINK_ATTR_84858)) {
+ return elink_84858_cmd_hdlr(phy, params, fw_cmd, cmd_args,
+ argc);
+ } else {
+ return elink_84833_cmd_hdlr(phy, params, fw_cmd, cmd_args,
+ argc, process);
+ }
+}
+
+static elink_status_t elink_848xx_pair_swap_cfg(struct elink_phy *phy,
+ struct elink_params *params,
+ __rte_unused struct elink_vars *vars)
{
uint32_t pair_swap;
- uint16_t data[PHY84833_CMDHDLR_MAX_ARGS];
+ uint16_t data[PHY848xx_CMDHDLR_MAX_ARGS];
elink_status_t status;
struct bnx2x_softc *sc = params->sc;
/* Check for configuration. */
pair_swap = REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- xgbt_phy_cfg)) &
- PORT_HW_CFG_RJ45_PAIR_SWAP_MASK;
+ dev_info.port_hw_config[params->port].xgbt_phy_cfg)) &
+ PORT_HW_CFG_RJ45_PAIR_SWAP_MASK;
if (pair_swap == 0)
return ELINK_STATUS_OK;
/* Only the second argument is used for this command */
- data[1] = (uint16_t) pair_swap;
+ data[1] = (uint16_t)pair_swap;
- status = elink_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_PAIR_SWAP, data,
- PHY84833_CMDHDLR_MAX_ARGS);
- if (status == ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Pairswap OK, val=0x%x", data[1]);
- }
+ status = elink_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_PAIR_SWAP, data,
+ 2, PHY84833_MB_PROCESS2);
+ if (status == ELINK_STATUS_OK)
+ ELINK_DEBUG_P1(sc, "Pairswap OK, val=0x%x", data[1]);
return status;
}
static uint8_t elink_84833_get_reset_gpios(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- __rte_unused uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ __rte_unused uint32_t chip_id)
{
uint32_t reset_pin[2];
uint32_t idx;
@@ -9424,54 +11146,50 @@ static uint8_t elink_84833_get_reset_gpios(struct bnx2x_softc *sc,
for (idx = 0; idx < 2; idx++) {
/* Map config param to register bit. */
reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] +
- offsetof(struct shmem_region,
- dev_info.
- port_hw_config[0].
- e3_cmn_pin_cfg));
- reset_pin[idx] =
- (reset_pin[idx] & PORT_HW_CFG_E3_PHY_RESET_MASK) >>
- PORT_HW_CFG_E3_PHY_RESET_SHIFT;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[0].e3_cmn_pin_cfg));
+ reset_pin[idx] = (reset_pin[idx] &
+ PORT_HW_CFG_E3_PHY_RESET_MASK) >>
+ PORT_HW_CFG_E3_PHY_RESET_SHIFT;
reset_pin[idx] -= PIN_CFG_GPIO0_P0;
reset_pin[idx] = (1 << reset_pin[idx]);
}
- reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]);
+ reset_gpios = (uint8_t)(reset_pin[0] | reset_pin[1]);
} else {
/* E2, look from diff place of shmem. */
for (idx = 0; idx < 2; idx++) {
reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] +
- offsetof(struct shmem_region,
- dev_info.
- port_hw_config[0].
- default_cfg));
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[0].default_cfg));
reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK;
reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0;
reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT;
reset_pin[idx] = (1 << reset_pin[idx]);
}
- reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]);
+ reset_gpios = (uint8_t)(reset_pin[0] | reset_pin[1]);
}
return reset_gpios;
}
static void elink_84833_hw_reset_phy(struct elink_phy *phy,
- struct elink_params *params)
+ struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
uint8_t reset_gpios;
uint32_t other_shmem_base_addr = REG_RD(sc, params->shmem2_base +
- offsetof(struct shmem2_region,
- other_shmem_base_addr));
+ offsetof(struct shmem2_region,
+ other_shmem_base_addr));
uint32_t shmem_base_path[2];
/* Work around for 84833 LED failure inside RESET status */
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_LEGACY_MII_CTRL,
- MDIO_AN_REG_8481_MII_CTRL_FORCE_1G);
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+ MDIO_AN_REG_8481_MII_CTRL_FORCE_1G);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
- MDIO_AN_REG_8481_1G_100T_EXT_CTRL,
- MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF);
+ MDIO_AN_REG_8481_1G_100T_EXT_CTRL,
+ MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF);
shmem_base_path[0] = params->shmem_base;
shmem_base_path[1] = other_shmem_base_addr;
@@ -9482,24 +11200,25 @@ static void elink_84833_hw_reset_phy(struct elink_phy *phy,
elink_cb_gpio_mult_write(sc, reset_gpios,
MISC_REGISTERS_GPIO_OUTPUT_LOW);
DELAY(10);
- PMD_DRV_LOG(DEBUG, sc,
- "84833 hw reset on pin values 0x%x", reset_gpios);
+ ELINK_DEBUG_P1(sc, "84833 hw reset on pin values 0x%x",
+ reset_gpios);
}
static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
elink_status_t rc;
+ struct bnx2x_softc *sc = params->sc;
uint16_t cmd_args = 0;
- PMD_DRV_LOG(DEBUG, params->sc, "Don't Advertise 10GBase-T EEE");
+ ELINK_DEBUG_P0(sc, "Don't Advertise 10GBase-T EEE");
/* Prevent Phy from working in EEE and advertising it */
- rc = elink_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
+ rc = elink_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE,
+ &cmd_args, 1, PHY84833_MB_PROCESS1);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, params->sc, "EEE disable failed.");
+ ELINK_DEBUG_P0(sc, "EEE disable failed.");
return rc;
}
@@ -9507,16 +11226,17 @@ static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy,
}
static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
elink_status_t rc;
+ struct bnx2x_softc *sc = params->sc;
uint16_t cmd_args = 1;
- rc = elink_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
+ rc = elink_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE,
+ &cmd_args, 1, PHY84833_MB_PROCESS1);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, params->sc, "EEE enable failed.");
+ ELINK_DEBUG_P0(sc, "EEE enable failed.");
return rc;
}
@@ -9525,14 +11245,14 @@ static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy,
#define PHY84833_CONSTANT_LATENCY 1193
static uint8_t elink_848x3_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port, initialize = 1;
uint16_t val;
uint32_t actual_phy_selection;
- uint16_t cmd_args[PHY84833_CMDHDLR_MAX_ARGS];
+ uint16_t cmd_args[PHY848xx_CMDHDLR_MAX_ARGS];
elink_status_t rc = ELINK_STATUS_OK;
DELAY(1000 * 1);
@@ -9544,19 +11264,20 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+ port);
} else {
/* MDIO reset */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x8000);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, 0x8000);
}
elink_wait_reset_complete(sc, phy, params);
/* Wait for GPHY to come out of reset */
DELAY(1000 * 50);
- if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
+ if (!elink_is_8483x_8485x(phy)) {
/* BNX2X84823 requires that XGXS links up first @ 10G for normal
* behavior.
*/
@@ -9567,7 +11288,19 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
elink_program_serdes(&params->phy[ELINK_INT_PHY], params, vars);
vars->line_speed = temp;
}
+ /* Check if this is actually BNX2X84858 */
+ if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858) {
+ uint16_t hw_rev;
+
+ elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_848xx_ID_MSB, &hw_rev);
+ if (hw_rev == BNX2X84858_PHY_ID) {
+ params->link_attr_sync |= LINK_ATTR_84858;
+ elink_update_link_attr(params, params->link_attr_sync);
+ }
+ }
+ /* Set dual-media configuration according to configuration */
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA, &val);
val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
@@ -9609,39 +11342,33 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA, val);
- PMD_DRV_LOG(DEBUG, sc, "Multi_phy config = 0x%x, Media control = 0x%x",
- params->multi_phy_config, val);
+ ELINK_DEBUG_P2(sc, "Multi_phy config = 0x%x, Media control = 0x%x",
+ params->multi_phy_config, val);
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
- elink_84833_pair_swap_cfg(phy, params, vars);
+ if (elink_is_8483x_8485x(phy)) {
+ elink_848xx_pair_swap_cfg(phy, params, vars);
/* Keep AutogrEEEn disabled. */
cmd_args[0] = 0x0;
cmd_args[1] = 0x0;
cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
cmd_args[3] = PHY84833_CONSTANT_LATENCY;
- rc = elink_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, cmd_args,
- PHY84833_CMDHDLR_MAX_ARGS);
- if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Cfg AutogrEEEn failed.");
- }
+ rc = elink_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_EEE_MODE, cmd_args,
+ 4, PHY84833_MB_PROCESS1);
+ if (rc != ELINK_STATUS_OK)
+ ELINK_DEBUG_P0(sc, "Cfg AutogrEEEn failed.");
}
- if (initialize) {
+ if (initialize)
rc = elink_848xx_cmn_config_init(phy, params, vars);
- } else {
+ else
elink_save_848xx_spirom_version(phy, sc, params->port);
- }
/* 84833 PHY has a better feature and doesn't need to support this. */
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
uint32_t cms_enable = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.
- port_hw_config[params->
- port].
- default_cfg)) &
- PORT_HW_CFG_ENABLE_CMS_MASK;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].default_cfg)) &
+ PORT_HW_CFG_ENABLE_CMS_MASK;
elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_USER_CTRL_REG, &val);
@@ -9662,7 +11389,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
elink_eee_has_cap(params)) {
rc = elink_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers");
+ ELINK_DEBUG_P0(sc, "Failed to configure EEE timers");
elink_8483x_disable_eee(phy, params, vars);
return rc;
}
@@ -9675,39 +11402,40 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
else
rc = elink_8483x_disable_eee(phy, params, vars);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to set EEE advertisement");
+ ELINK_DEBUG_P0(sc, "Failed to set EEE advertisement");
return rc;
}
} else {
vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK;
}
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
+ if (elink_is_8483x_8485x(phy)) {
/* Bring PHY out of super isolate mode as the final step. */
elink_cl45_read_and_write(sc, phy,
MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_XGPHY_STRAP1,
- (uint16_t) ~
- MDIO_84833_SUPER_ISOLATE);
+ (uint16_t)~MDIO_84833_SUPER_ISOLATE);
}
return rc;
}
static uint8_t elink_848xx_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val, val1, val2;
uint8_t link_up = 0;
+
/* Check 10G-BaseT link status */
/* Check PMD signal ok */
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, 0xFFFA, &val1);
elink_cl45_read(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2);
- PMD_DRV_LOG(DEBUG, sc, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2);
+ MDIO_AN_DEVAD, 0xFFFA, &val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL,
+ &val2);
+ ELINK_DEBUG_P1(sc, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2);
/* Check link 10G */
if (val2 & (1 << 11)) {
@@ -9715,8 +11443,8 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
vars->duplex = DUPLEX_FULL;
link_up = 1;
elink_ext_phy_10G_an_resolve(sc, phy, vars);
- } else { /* Check Legacy speed link */
- uint16_t legacy_status, legacy_speed, mii_ctrl;
+ } else { /* Check Legacy speed link */
+ uint16_t legacy_status, legacy_speed;
/* Enable expansion register 0x42 (Operation mode status) */
elink_cl45_write(sc, phy,
@@ -9729,8 +11457,8 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
&legacy_status);
- PMD_DRV_LOG(DEBUG, sc,
- "Legacy speed status = 0x%x", legacy_status);
+ ELINK_DEBUG_P1(sc, "Legacy speed status = 0x%x",
+ legacy_status);
link_up = ((legacy_status & (1 << 11)) == (1 << 11));
legacy_speed = (legacy_status & (3 << 9));
if (legacy_speed == (0 << 9))
@@ -9739,13 +11467,15 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
vars->line_speed = ELINK_SPEED_100;
else if (legacy_speed == (2 << 9))
vars->line_speed = ELINK_SPEED_1000;
- else { /* Should not happen: Treat as link down */
+ else { /* Should not happen: Treat as link down */
vars->line_speed = 0;
link_up = 0;
}
if (params->feature_config_flags &
- ELINK_FEATURE_CONFIG_IEEE_PHY_TEST) {
+ ELINK_FEATURE_CONFIG_IEEE_PHY_TEST) {
+ uint16_t mii_ctrl;
+
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_LEGACY_MII_CTRL,
@@ -9760,10 +11490,10 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
else
vars->duplex = DUPLEX_HALF;
- PMD_DRV_LOG(DEBUG, sc,
- "Link is up in %dMbps, is_duplex_full= %d",
- vars->line_speed,
- (vars->duplex == DUPLEX_FULL));
+ ELINK_DEBUG_P2(sc,
+ "Link is up in %dMbps, is_duplex_full= %d",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD,
@@ -9771,19 +11501,19 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
&val);
if (val & (1 << 5))
vars->link_status |=
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
elink_cl45_read(sc, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_LEGACY_AN_EXPANSION,
&val);
if ((val & (1 << 0)) == 0)
vars->link_status |=
- LINK_STATUS_PARALLEL_DETECTION_USED;
+ LINK_STATUS_PARALLEL_DETECTION_USED;
}
}
if (link_up) {
- PMD_DRV_LOG(DEBUG, sc, "BNX2X848x3: link speed is %d",
- vars->line_speed);
+ ELINK_DEBUG_P1(sc, "BNX2X848x3: link speed is %d",
+ vars->line_speed);
elink_ext_phy_resolve_fc(phy, params, vars);
/* Read LP advertised speeds */
@@ -9791,48 +11521,47 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
MDIO_AN_REG_CL37_FC_LP, &val);
if (val & (1 << 5))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
if (val & (1 << 6))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
if (val & (1 << 7))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
if (val & (1 << 8))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
if (val & (1 << 9))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_1000T_STATUS, &val);
if (val & (1 << 10))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
if (val & (1 << 11))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_MASTER_STATUS, &val);
if (val & (1 << 11))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
/* Determine if EEE was negotiated */
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834))
+ if (elink_is_8483x_8485x(phy))
elink_eee_an_resolve(phy, params, vars);
}
return link_up;
}
-static uint8_t elink_848xx_format_ver(uint32_t raw_ver, uint8_t * str,
- uint16_t * len)
+static elink_status_t elink_848xx_format_ver(uint32_t raw_ver, uint8_t *str,
+ uint16_t *len)
{
elink_status_t status = ELINK_STATUS_OK;
uint32_t spirom_ver;
@@ -9845,17 +11574,18 @@ static void elink_8481_hw_reset(__rte_unused struct elink_phy *phy,
struct elink_params *params)
{
elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, 0);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, 0);
elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, 1);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, 1);
}
static void elink_8481_link_reset(struct elink_phy *phy,
- struct elink_params *params)
+ struct elink_params *params)
{
elink_cl45_write(params->sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000);
- elink_cl45_write(params->sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1);
+ elink_cl45_write(params->sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1);
}
static void elink_848x3_link_reset(struct elink_phy *phy,
@@ -9872,7 +11602,8 @@ static void elink_848x3_link_reset(struct elink_phy *phy,
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW,
+ port);
} else {
elink_cl45_read(sc, phy,
MDIO_CTL_DEVAD,
@@ -9889,48 +11620,52 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
{
struct bnx2x_softc *sc = params->sc;
uint16_t val;
- __rte_unused uint8_t port;
+ uint8_t port;
if (!(CHIP_IS_E1x(sc)))
port = SC_PATH(sc);
else
port = params->port;
-
switch (mode) {
case ELINK_LED_MODE_OFF:
- PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OFF", port);
+ ELINK_DEBUG_P1(sc, "Port 0x%x: LED MODE OFF", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
/* Set LED masks */
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x0);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED2_MASK, 0x0);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED2_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_MASK, 0x0);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED3_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED5_MASK, 0x0);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED5_MASK,
+ 0x0);
} else {
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x0);
}
break;
case ELINK_LED_MODE_FRONT_PANEL_OFF:
- PMD_DRV_LOG(DEBUG, sc,
- "Port 0x%x: LED MODE FRONT PANEL OFF", port);
+ ELINK_DEBUG_P1(sc, "Port 0x%x: LED MODE FRONT PANEL OFF",
+ port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -9938,25 +11673,31 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
/* Set LED masks */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED2_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED2_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED3_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED5_MASK, 0x20);
+ MDIO_PMA_REG_8481_LED5_MASK,
+ 0x20);
} else {
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x0);
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x0);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
/* Disable MI_INT interrupt before setting LED4
* source to constant off.
*/
@@ -9964,12 +11705,13 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
params->port * 4) &
ELINK_NIG_MASK_MI_INT) {
params->link_flags |=
- ELINK_LINK_FLAGS_INT_DISABLED;
+ ELINK_LINK_FLAGS_INT_DISABLED;
- elink_bits_dis(sc,
- NIG_REG_MASK_INTERRUPT_PORT0
- + params->port * 4,
- ELINK_NIG_MASK_MI_INT);
+ elink_bits_dis(
+ sc,
+ NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port * 4,
+ ELINK_NIG_MASK_MI_INT);
}
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -9980,42 +11722,50 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
break;
case ELINK_LED_MODE_ON:
- PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE ON", port);
+ ELINK_DEBUG_P1(sc, "Port 0x%x: LED MODE ON", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
/* Set control reg */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ &val);
val &= 0x8000;
val |= 0x2492;
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ val);
/* Set LED masks */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x0);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED2_MASK, 0x20);
+ MDIO_PMA_REG_8481_LED2_MASK,
+ 0x20);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_MASK, 0x20);
+ MDIO_PMA_REG_8481_LED3_MASK,
+ 0x20);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED5_MASK, 0x0);
+ MDIO_PMA_REG_8481_LED5_MASK,
+ 0x0);
} else {
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x20);
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x20);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
/* Disable MI_INT interrupt before setting LED4
* source to constant on.
*/
@@ -10023,12 +11773,13 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
params->port * 4) &
ELINK_NIG_MASK_MI_INT) {
params->link_flags |=
- ELINK_LINK_FLAGS_INT_DISABLED;
+ ELINK_LINK_FLAGS_INT_DISABLED;
- elink_bits_dis(sc,
- NIG_REG_MASK_INTERRUPT_PORT0
- + params->port * 4,
- ELINK_NIG_MASK_MI_INT);
+ elink_bits_dis(
+ sc,
+ NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port * 4,
+ ELINK_NIG_MASK_MI_INT);
}
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -10040,7 +11791,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
case ELINK_LED_MODE_OPER:
- PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OPER", port);
+ ELINK_DEBUG_P1(sc, "Port 0x%x: LED MODE OPER", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -10048,14 +11799,13 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
/* Set control reg */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ &val);
if (!((val &
MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK)
- >>
- MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT))
- {
- PMD_DRV_LOG(DEBUG, sc, "Setting LINK_SIGNAL");
+ >> MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT)) {
+ ELINK_DEBUG_P0(sc, "Setting LINK_SIGNAL");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LINK_SIGNAL,
@@ -10065,19 +11815,23 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
/* Set LED masks */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, 0x10);
+ MDIO_PMA_REG_8481_LED1_MASK,
+ 0x10);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED2_MASK, 0x80);
+ MDIO_PMA_REG_8481_LED2_MASK,
+ 0x80);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_MASK, 0x98);
+ MDIO_PMA_REG_8481_LED3_MASK,
+ 0x98);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED5_MASK, 0x40);
+ MDIO_PMA_REG_8481_LED5_MASK,
+ 0x40);
} else {
/* EXTPHY2 LED mode indicate that the 100M/1G/10G LED
@@ -10090,18 +11844,22 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK, val);
+ MDIO_PMA_REG_8481_LED1_MASK,
+ val);
/* Tell LED3 to blink on source */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ &val);
val &= ~(7 << 6);
- val |= (1 << 6); /* A83B[8:6]= 1 */
+ val |= (1 << 6); /* A83B[8:6]= 1 */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, val);
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ val);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
/* Restore LED4 source to external link,
* and re-enable interrupts.
*/
@@ -10113,14 +11871,14 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
ELINK_LINK_FLAGS_INT_DISABLED) {
elink_link_int_enable(params);
params->link_flags &=
- ~ELINK_LINK_FLAGS_INT_DISABLED;
+ ~ELINK_LINK_FLAGS_INT_DISABLED;
}
}
}
break;
}
- /* This is a workaround for E3+84833 until autoneg
+ /* This is a workaround for E3 + 84833 until autoneg
* restart is fixed in f/w
*/
if (CHIP_IS_E3(sc)) {
@@ -10145,7 +11903,9 @@ static void elink_54618se_specific_func(struct elink_phy *phy,
elink_cl22_write(sc, phy,
MDIO_REG_GPHY_SHADOW,
MDIO_REG_GPHY_SHADOW_LED_SEL2);
- elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
+ elink_cl22_read(sc, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
temp &= ~(0xf << 4);
temp |= (0x6 << 4);
elink_cl22_write(sc, phy,
@@ -10160,15 +11920,15 @@ static void elink_54618se_specific_func(struct elink_phy *phy,
}
static uint8_t elink_54618se_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t port;
uint16_t autoneg_val, an_1000_val, an_10_100_val, fc_val, temp;
uint32_t cfg_pin;
- PMD_DRV_LOG(DEBUG, sc, "54618SE cfg init");
+ ELINK_DEBUG_P0(sc, "54618SE cfg init");
DELAY(1000 * 1);
/* This works with E3 only, no need to check the chip
@@ -10177,11 +11937,10 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
port = params->port;
cfg_pin = (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- e3_cmn_pin_cfg)) &
- PORT_HW_CFG_E3_PHY_RESET_MASK) >>
- PORT_HW_CFG_E3_PHY_RESET_SHIFT;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
+ PORT_HW_CFG_E3_PHY_RESET_MASK) >>
+ PORT_HW_CFG_E3_PHY_RESET_SHIFT;
/* Drive pin high to bring the GPHY out of reset. */
elink_set_cfg_pin(sc, cfg_pin, 1);
@@ -10190,63 +11949,76 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
DELAY(1000 * 50);
/* reset phy */
- elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, 0x8000);
+ elink_cl22_write(sc, phy,
+ MDIO_PMA_REG_CTRL, 0x8000);
elink_wait_reset_complete(sc, phy, params);
/* Wait for GPHY to reset */
DELAY(1000 * 50);
+
elink_54618se_specific_func(phy, params, ELINK_PHY_INIT);
/* Flip the signal detect polarity (set 0x1c.0x1e[8]). */
elink_cl22_write(sc, phy,
- MDIO_REG_GPHY_SHADOW,
- MDIO_REG_GPHY_SHADOW_AUTO_DET_MED);
- elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_AUTO_DET_MED);
+ elink_cl22_read(sc, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD;
elink_cl22_write(sc, phy,
- MDIO_REG_GPHY_SHADOW,
- MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
/* Set up fc */
/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
fc_val = 0;
if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC)
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC)
fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
/* Read all advertisement */
- elink_cl22_read(sc, phy, 0x09, &an_1000_val);
+ elink_cl22_read(sc, phy,
+ 0x09,
+ &an_1000_val);
- elink_cl22_read(sc, phy, 0x04, &an_10_100_val);
+ elink_cl22_read(sc, phy,
+ 0x04,
+ &an_10_100_val);
- elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &autoneg_val);
+ elink_cl22_read(sc, phy,
+ MDIO_PMA_REG_CTRL,
+ &autoneg_val);
/* Disable forced speed */
- autoneg_val &=
- ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13));
- an_10_100_val &=
- ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) | (1 << 10) |
- (1 << 11));
+ autoneg_val &= ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) |
+ (1 << 13));
+ an_10_100_val &= ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) |
+ (1 << 10) | (1 << 11));
if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
- (phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
- (phy->req_line_speed == ELINK_SPEED_1000)) {
+ (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+ (phy->req_line_speed == ELINK_SPEED_1000)) {
an_1000_val |= (1 << 8);
autoneg_val |= (1 << 9 | 1 << 12);
if (phy->req_duplex == DUPLEX_FULL)
an_1000_val |= (1 << 9);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 1G");
+ ELINK_DEBUG_P0(sc, "Advertising 1G");
} else
an_1000_val &= ~((1 << 8) | (1 << 9));
- elink_cl22_write(sc, phy, 0x09, an_1000_val);
- elink_cl22_read(sc, phy, 0x09, &an_1000_val);
+ elink_cl22_write(sc, phy,
+ 0x09,
+ an_1000_val);
+ elink_cl22_read(sc, phy,
+ 0x09,
+ &an_1000_val);
/* Advertise 10/100 link speed */
if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) {
@@ -10254,25 +12026,25 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
an_10_100_val |= (1 << 5);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD");
+ ELINK_DEBUG_P0(sc, "Advertising 10M-HD");
}
if (phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
an_10_100_val |= (1 << 6);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD");
+ ELINK_DEBUG_P0(sc, "Advertising 10M-FD");
}
if (phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
an_10_100_val |= (1 << 7);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD");
+ ELINK_DEBUG_P0(sc, "Advertising 100M-HD");
}
if (phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
an_10_100_val |= (1 << 8);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD");
+ ELINK_DEBUG_P0(sc, "Advertising 100M-FD");
}
}
@@ -10280,13 +12052,17 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
if (phy->req_line_speed == ELINK_SPEED_100) {
autoneg_val |= (1 << 13);
/* Enabled AUTO-MDIX when autoneg is disabled */
- elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, sc, "Setting 100M force");
+ elink_cl22_write(sc, phy,
+ 0x18,
+ (1 << 15 | 1 << 9 | 7 << 0));
+ ELINK_DEBUG_P0(sc, "Setting 100M force");
}
if (phy->req_line_speed == ELINK_SPEED_10) {
/* Enabled AUTO-MDIX when autoneg is disabled */
- elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, sc, "Setting 10M force");
+ elink_cl22_write(sc, phy,
+ 0x18,
+ (1 << 15 | 1 << 9 | 7 << 0));
+ ELINK_DEBUG_P0(sc, "Setting 10M force");
}
if ((phy->flags & ELINK_FLAGS_EEE) && elink_eee_has_cap(params)) {
@@ -10301,7 +12077,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
rc = elink_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers");
+ ELINK_DEBUG_P0(sc, "Failed to configure EEE timers");
elink_eee_disable(phy, params, vars);
} else if ((params->eee_mode & ELINK_EEE_MODE_ADV_LPI) &&
(phy->req_duplex == DUPLEX_FULL) &&
@@ -10315,38 +12091,42 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
elink_eee_advertise(phy, params, vars,
SHMEM_EEE_1G_ADV);
} else {
- PMD_DRV_LOG(DEBUG, sc, "Don't Advertise 1GBase-T EEE");
+ ELINK_DEBUG_P0(sc, "Don't Advertise 1GBase-T EEE");
elink_eee_disable(phy, params, vars);
}
} else {
- vars->eee_status &= ~SHMEM_EEE_1G_ADV <<
- SHMEM_EEE_SUPPORTED_SHIFT;
+ vars->eee_status &= ((uint32_t)(~SHMEM_EEE_1G_ADV) <<
+ SHMEM_EEE_SUPPORTED_SHIFT);
if (phy->flags & ELINK_FLAGS_EEE) {
/* Handle legacy auto-grEEEn */
if (params->feature_config_flags &
ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED) {
temp = 6;
- PMD_DRV_LOG(DEBUG, sc, "Enabling Auto-GrEEEn");
+ ELINK_DEBUG_P0(sc, "Enabling Auto-GrEEEn");
} else {
temp = 0;
- PMD_DRV_LOG(DEBUG, sc, "Don't Adv. EEE");
+ ELINK_DEBUG_P0(sc, "Don't Adv. EEE");
}
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_EEE_ADV, temp);
}
}
- elink_cl22_write(sc, phy, 0x04, an_10_100_val | fc_val);
+ elink_cl22_write(sc, phy,
+ 0x04,
+ an_10_100_val | fc_val);
if (phy->req_duplex == DUPLEX_FULL)
autoneg_val |= (1 << 8);
- elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, autoneg_val);
+ elink_cl22_write(sc, phy,
+ MDIO_PMA_REG_CTRL, autoneg_val);
return ELINK_STATUS_OK;
}
+
static void elink_5461x_set_link_led(struct elink_phy *phy,
struct elink_params *params, uint8_t mode)
{
@@ -10354,11 +12134,14 @@ static void elink_5461x_set_link_led(struct elink_phy *phy,
uint16_t temp;
elink_cl22_write(sc, phy,
- MDIO_REG_GPHY_SHADOW, MDIO_REG_GPHY_SHADOW_LED_SEL1);
- elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_LED_SEL1);
+ elink_cl22_read(sc, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
temp &= 0xff00;
- PMD_DRV_LOG(DEBUG, sc, "54618x set link led (mode=%x)", mode);
+ ELINK_DEBUG_P1(sc, "54618x set link led (mode=%x)", mode);
switch (mode) {
case ELINK_LED_MODE_FRONT_PANEL_OFF:
case ELINK_LED_MODE_OFF:
@@ -10374,11 +12157,12 @@ static void elink_5461x_set_link_led(struct elink_phy *phy,
break;
}
elink_cl22_write(sc, phy,
- MDIO_REG_GPHY_SHADOW,
- MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
return;
}
+
static void elink_54618se_link_reset(struct elink_phy *phy,
struct elink_params *params)
{
@@ -10395,19 +12179,18 @@ static void elink_54618se_link_reset(struct elink_phy *phy,
*/
port = params->port;
cfg_pin = (REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- e3_cmn_pin_cfg)) &
- PORT_HW_CFG_E3_PHY_RESET_MASK) >>
- PORT_HW_CFG_E3_PHY_RESET_SHIFT;
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
+ PORT_HW_CFG_E3_PHY_RESET_MASK) >>
+ PORT_HW_CFG_E3_PHY_RESET_SHIFT;
/* Drive pin low to put GPHY in reset. */
elink_set_cfg_pin(sc, cfg_pin, 0);
}
static uint8_t elink_54618se_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint16_t val;
@@ -10415,11 +12198,15 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
uint16_t legacy_status, legacy_speed;
/* Get speed operation status */
- elink_cl22_read(sc, phy, MDIO_REG_GPHY_AUX_STATUS, &legacy_status);
- PMD_DRV_LOG(DEBUG, sc, "54618SE read_status: 0x%x", legacy_status);
+ elink_cl22_read(sc, phy,
+ MDIO_REG_GPHY_AUX_STATUS,
+ &legacy_status);
+ ELINK_DEBUG_P1(sc, "54618SE read_status: 0x%x", legacy_status);
/* Read status to clear the PHY interrupt. */
- elink_cl22_read(sc, phy, MDIO_REG_INTR_STATUS, &val);
+ elink_cl22_read(sc, phy,
+ MDIO_REG_INTR_STATUS,
+ &val);
link_up = ((legacy_status & (1 << 2)) == (1 << 2));
@@ -10445,25 +12232,30 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
} else if (legacy_speed == (1 << 8)) {
vars->line_speed = ELINK_SPEED_10;
vars->duplex = DUPLEX_HALF;
- } else /* Should not happen */
+ } else /* Should not happen */
vars->line_speed = 0;
- PMD_DRV_LOG(DEBUG, sc,
- "Link is up in %dMbps, is_duplex_full= %d",
- vars->line_speed, (vars->duplex == DUPLEX_FULL));
+ ELINK_DEBUG_P2(sc,
+ "Link is up in %dMbps, is_duplex_full= %d",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
- elink_cl22_read(sc, phy, 0x01, &val);
+ elink_cl22_read(sc, phy,
+ 0x01,
+ &val);
if (val & (1 << 5))
vars->link_status |=
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
- elink_cl22_read(sc, phy, 0x06, &val);
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ elink_cl22_read(sc, phy,
+ 0x06,
+ &val);
if ((val & (1 << 0)) == 0)
vars->link_status |=
- LINK_STATUS_PARALLEL_DETECTION_USED;
+ LINK_STATUS_PARALLEL_DETECTION_USED;
- PMD_DRV_LOG(DEBUG, sc, "BNX2X54618SE: link speed is %d",
- vars->line_speed);
+ ELINK_DEBUG_P1(sc, "BNX2X4618SE: link speed is %d",
+ vars->line_speed);
elink_ext_phy_resolve_fc(phy, params, vars);
@@ -10473,27 +12265,27 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
if (val & (1 << 5))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
if (val & (1 << 6))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
if (val & (1 << 7))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
if (val & (1 << 8))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
if (val & (1 << 9))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;
elink_cl22_read(sc, phy, 0xa, &val);
if (val & (1 << 10))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
if (val & (1 << 11))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
if ((phy->flags & ELINK_FLAGS_EEE) &&
elink_eee_has_cap(params))
@@ -10510,7 +12302,7 @@ static void elink_54618se_config_loopback(struct elink_phy *phy,
uint16_t val;
uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
- PMD_DRV_LOG(DEBUG, sc, "2PMA/PMD ext_phy_loopback: 54618se");
+ ELINK_DEBUG_P0(sc, "2PMA/PMD ext_phy_loopback: 54618se");
/* Enable master/slave manual mmode and set to master */
/* mii write 9 [bits set 11 12] */
@@ -10556,30 +12348,33 @@ static void elink_7101_config_loopback(struct elink_phy *phy,
}
static uint8_t elink_7101_config_init(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
uint16_t fw_ver1, fw_ver2, val;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LASI indication");
+ ELINK_DEBUG_P0(sc, "Setting the SFX7101 LASI indication");
- /* Restore normal power mode */
+ /* Restore normal power mode*/
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
elink_ext_phy_hw_reset(sc, params->port);
elink_wait_reset_complete(sc, phy, params);
- elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1);
- PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LED to blink on traffic");
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1);
+ ELINK_DEBUG_P0(sc, "Setting the SFX7101 LED to blink on traffic");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1 << 3));
elink_ext_phy_set_pause(params, phy, vars);
/* Restart autoneg */
- elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val);
+ elink_cl45_read(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val);
val |= 0x200;
- elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val);
+ elink_cl45_write(sc, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val);
/* Save spirom version */
elink_cl45_read(sc, phy,
@@ -10588,24 +12383,30 @@ static uint8_t elink_7101_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2);
elink_save_spirom_version(sc, params->port,
- (uint32_t) (fw_ver1 << 16 | fw_ver2),
+ (uint32_t)(fw_ver1 << 16 | fw_ver2),
phy->ver_addr);
return ELINK_STATUS_OK;
}
static uint8_t elink_7101_read_status(struct elink_phy *phy,
- struct elink_params *params,
- struct elink_vars *vars)
+ struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
uint8_t link_up;
uint16_t val1, val2;
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, sc, "10G-base-T LASI status 0x%x->0x%x", val2, val1);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
- elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, sc, "10G-base-T PMA status 0x%x->0x%x", val2, val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
+ ELINK_DEBUG_P2(sc, "10G-base-T LASI status 0x%x->0x%x",
+ val2, val1);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
+ ELINK_DEBUG_P2(sc, "10G-base-T PMA status 0x%x->0x%x",
+ val2, val1);
link_up = ((val1 & 4) == 4);
/* If link is up print the AN outcome of the SFX7101 PHY */
if (link_up) {
@@ -10614,21 +12415,21 @@ static uint8_t elink_7101_read_status(struct elink_phy *phy,
&val2);
vars->line_speed = ELINK_SPEED_10000;
vars->duplex = DUPLEX_FULL;
- PMD_DRV_LOG(DEBUG, sc, "SFX7101 AN status 0x%x->Master=%x",
- val2, (val2 & (1 << 14)));
+ ELINK_DEBUG_P2(sc, "SFX7101 AN status 0x%x->Master=%x",
+ val2, (val2 & (1 << 14)));
elink_ext_phy_10G_an_resolve(sc, phy, vars);
elink_ext_phy_resolve_fc(phy, params, vars);
/* Read LP advertised speeds */
if (val2 & (1 << 11))
vars->link_status |=
- LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
+ LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
}
return link_up;
}
-static uint8_t elink_7101_format_ver(uint32_t spirom_ver, uint8_t * str,
- uint16_t * len)
+static elink_status_t elink_7101_format_ver(uint32_t spirom_ver, uint8_t *str,
+ uint16_t *len)
{
if (*len < 5)
return ELINK_STATUS_ERROR;
@@ -10641,15 +12442,39 @@ static uint8_t elink_7101_format_ver(uint32_t spirom_ver, uint8_t * str,
return ELINK_STATUS_OK;
}
-static void elink_7101_hw_reset(__rte_unused struct elink_phy *phy,
- struct elink_params *params)
+void elink_sfx7101_sp_sw_reset(struct bnx2x_softc *sc, struct elink_phy *phy)
{
+ uint16_t val, cnt;
+
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_7101_RESET, &val);
+
+ for (cnt = 0; cnt < 10; cnt++) {
+ DELAY(1000 * 50);
+ /* Writes a self-clearing reset */
+ elink_cl45_write(sc, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_7101_RESET,
+ (val | (1 << 15)));
+ /* Wait for clear */
+ elink_cl45_read(sc, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_7101_RESET, &val);
+
+ if ((val & (1 << 15)) == 0)
+ break;
+ }
+}
+
+static void elink_7101_hw_reset(__rte_unused struct elink_phy *phy,
+ struct elink_params *params) {
/* Low power mode is controlled by GPIO 2 */
elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
/* The PHY reset is controlled by GPIO 1 */
elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
}
static void elink_7101_set_link_led(struct elink_phy *phy,
@@ -10670,7 +12495,9 @@ static void elink_7101_set_link_led(struct elink_phy *phy,
break;
}
elink_cl45_write(sc, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LINK_LED_CNTL, val);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_7107_LINK_LED_CNTL,
+ val);
}
/******************************************************************/
@@ -10678,482 +12505,532 @@ static void elink_7101_set_link_led(struct elink_phy *phy,
/******************************************************************/
static const struct elink_phy phy_null = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN,
- .addr = 0,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = 0,
- .media_type = ELINK_ETH_PHY_NOT_PRESENT,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = NULL,
- .read_status = NULL,
- .link_reset = NULL,
- .config_loopback = NULL,
- .format_fw_ver = NULL,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN,
+ .addr = 0,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = 0,
+ .media_type = ELINK_ETH_PHY_NOT_PRESENT,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)NULL,
+ .read_status = (read_status_t)NULL,
+ .link_reset = (link_reset_t)NULL,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static const struct elink_phy phy_serdes = {
- .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = 0,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_2500baseX_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_xgxs_config_init,
- .read_status = elink_link_settings_status,
- .link_reset = elink_int_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = NULL,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = 0,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_2500baseX_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_xgxs_config_init,
+ .read_status = (read_status_t)elink_link_settings_status,
+ .link_reset = (link_reset_t)elink_int_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static const struct elink_phy phy_xgxs = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = 0,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_2500baseX_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_CX4,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_xgxs_config_init,
- .read_status = elink_link_settings_status,
- .link_reset = elink_int_link_reset,
- .config_loopback = elink_set_xgxs_loopback,
- .format_fw_ver = NULL,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = elink_xgxs_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = 0,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_2500baseX_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_CX4,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_xgxs_config_init,
+ .read_status = (read_status_t)elink_link_settings_status,
+ .link_reset = (link_reset_t)elink_int_link_reset,
+ .config_loopback = (config_loopback_t)elink_set_xgxs_loopback,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)elink_xgxs_specific_func
};
-
static const struct elink_phy phy_warpcore = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_TX_ERROR_CHECK,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_20000baseKR2_Full |
- ELINK_SUPPORTED_20000baseMLD2_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_UNSPECIFIED,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- /* req_duplex = */ 0,
- /* rsrv = */ 0,
- .config_init = elink_warpcore_config_init,
- .read_status = elink_warpcore_read_status,
- .link_reset = elink_warpcore_link_reset,
- .config_loopback = elink_set_warpcore_loopback,
- .format_fw_ver = NULL,
- .hw_reset = elink_warpcore_hw_reset,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_TX_ERROR_CHECK,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_1000baseKX_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_10000baseKR_Full |
+ ELINK_SUPPORTED_20000baseKR2_Full |
+ ELINK_SUPPORTED_20000baseMLD2_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_UNSPECIFIED,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ /* req_duplex = */0,
+ /* rsrv = */0,
+ .config_init = (config_init_t)elink_warpcore_config_init,
+ .read_status = (read_status_t)elink_warpcore_read_status,
+ .link_reset = (link_reset_t)elink_warpcore_link_reset,
+ .config_loopback = (config_loopback_t)elink_set_warpcore_loopback,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)elink_warpcore_hw_reset,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
+
static const struct elink_phy phy_7101 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_7101_config_init,
- .read_status = elink_7101_read_status,
- .link_reset = elink_common_ext_link_reset,
- .config_loopback = elink_7101_config_loopback,
- .format_fw_ver = elink_7101_format_ver,
- .hw_reset = elink_7101_hw_reset,
- .set_link_led = elink_7101_set_link_led,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_7101_config_init,
+ .read_status = (read_status_t)elink_7101_read_status,
+ .link_reset = (link_reset_t)elink_common_ext_link_reset,
+ .config_loopback = (config_loopback_t)elink_7101_config_loopback,
+ .format_fw_ver = (format_fw_ver_t)elink_7101_format_ver,
+ .hw_reset = (hw_reset_t)elink_7101_hw_reset,
+ .set_link_led = (set_link_led_t)elink_7101_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
-
static const struct elink_phy phy_8073 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = 0,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_2500baseX_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_KR,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8073_config_init,
- .read_status = elink_8073_read_status,
- .link_reset = elink_8073_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_format_ver,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = elink_8073_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = 0,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_2500baseX_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_KR,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8073_config_init,
+ .read_status = (read_status_t)elink_8073_read_status,
+ .link_reset = (link_reset_t)elink_8073_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)elink_8073_specific_func
};
-
static const struct elink_phy phy_8705 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_XFP_FIBER,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8705_config_init,
- .read_status = elink_8705_read_status,
- .link_reset = elink_common_ext_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_null_format_ver,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_XFP_FIBER,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8705_config_init,
+ .read_status = (read_status_t)elink_8705_read_status,
+ .link_reset = (link_reset_t)elink_common_ext_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_null_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
-
static const struct elink_phy phy_8706 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_SFPP_10G_FIBER,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8706_config_init,
- .read_status = elink_8706_read_status,
- .link_reset = elink_common_ext_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_format_ver,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_SFPP_10G_FIBER,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8706_config_init,
+ .read_status = (read_status_t)elink_8706_read_status,
+ .link_reset = (link_reset_t)elink_common_ext_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static const struct elink_phy phy_8726 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = (ELINK_FLAGS_INIT_XGXS_FIRST | ELINK_FLAGS_TX_ERROR_CHECK),
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_NOT_PRESENT,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8726_config_init,
- .read_status = elink_8726_read_status,
- .link_reset = elink_8726_link_reset,
- .config_loopback = elink_8726_config_loopback,
- .format_fw_ver = elink_format_ver,
- .hw_reset = NULL,
- .set_link_led = NULL,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = (ELINK_FLAGS_INIT_XGXS_FIRST |
+ ELINK_FLAGS_TX_ERROR_CHECK),
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_NOT_PRESENT,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8726_config_init,
+ .read_status = (read_status_t)elink_8726_read_status,
+ .link_reset = (link_reset_t)elink_8726_link_reset,
+ .config_loopback = (config_loopback_t)elink_8726_config_loopback,
+ .format_fw_ver = (format_fw_ver_t)elink_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static const struct elink_phy phy_8727 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ | ELINK_FLAGS_TX_ERROR_CHECK),
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_FIBRE |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_NOT_PRESENT,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8727_config_init,
- .read_status = elink_8727_read_status,
- .link_reset = elink_8727_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_format_ver,
- .hw_reset = elink_8727_hw_reset,
- .set_link_led = elink_8727_set_link_led,
- .phy_specific_func = elink_8727_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_TX_ERROR_CHECK),
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_NOT_PRESENT,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8727_config_init,
+ .read_status = (read_status_t)elink_8727_read_status,
+ .link_reset = (link_reset_t)elink_8727_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_format_ver,
+ .hw_reset = (hw_reset_t)elink_8727_hw_reset,
+ .set_link_led = (set_link_led_t)elink_8727_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_8727_specific_func
};
-
static const struct elink_phy phy_8481 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
- ELINK_FLAGS_REARM_LATCH_SIGNAL,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_8481_config_init,
- .read_status = elink_848xx_read_status,
- .link_reset = elink_8481_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_848xx_format_ver,
- .hw_reset = elink_8481_hw_reset,
- .set_link_led = elink_848xx_set_link_led,
- .phy_specific_func = NULL
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_REARM_LATCH_SIGNAL,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_8481_config_init,
+ .read_status = (read_status_t)elink_848xx_read_status,
+ .link_reset = (link_reset_t)elink_8481_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_848xx_format_ver,
+ .hw_reset = (hw_reset_t)elink_8481_hw_reset,
+ .set_link_led = (set_link_led_t)elink_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static const struct elink_phy phy_84823 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
- ELINK_FLAGS_REARM_LATCH_SIGNAL | ELINK_FLAGS_TX_ERROR_CHECK),
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_848x3_config_init,
- .read_status = elink_848xx_read_status,
- .link_reset = elink_848x3_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_848xx_format_ver,
- .hw_reset = NULL,
- .set_link_led = elink_848xx_set_link_led,
- .phy_specific_func = elink_848xx_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_REARM_LATCH_SIGNAL |
+ ELINK_FLAGS_TX_ERROR_CHECK),
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_848x3_config_init,
+ .read_status = (read_status_t)elink_848xx_read_status,
+ .link_reset = (link_reset_t)elink_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_848xx_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)elink_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_848xx_specific_func
};
static const struct elink_phy phy_84833 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
- ELINK_FLAGS_REARM_LATCH_SIGNAL |
- ELINK_FLAGS_TX_ERROR_CHECK | ELINK_FLAGS_TEMPERATURE),
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_848x3_config_init,
- .read_status = elink_848xx_read_status,
- .link_reset = elink_848x3_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_848xx_format_ver,
- .hw_reset = elink_84833_hw_reset_phy,
- .set_link_led = elink_848xx_set_link_led,
- .phy_specific_func = elink_848xx_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_REARM_LATCH_SIGNAL |
+ ELINK_FLAGS_TX_ERROR_CHECK |
+ ELINK_FLAGS_TEMPERATURE),
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_848x3_config_init,
+ .read_status = (read_status_t)elink_848xx_read_status,
+ .link_reset = (link_reset_t)elink_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_848xx_format_ver,
+ .hw_reset = (hw_reset_t)elink_84833_hw_reset_phy,
+ .set_link_led = (set_link_led_t)elink_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_848xx_specific_func
};
static const struct elink_phy phy_84834 = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
- ELINK_FLAGS_REARM_LATCH_SIGNAL,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- .req_duplex = 0,
- .rsrv = 0,
- .config_init = elink_848x3_config_init,
- .read_status = elink_848xx_read_status,
- .link_reset = elink_848x3_link_reset,
- .config_loopback = NULL,
- .format_fw_ver = elink_848xx_format_ver,
- .hw_reset = elink_84833_hw_reset_phy,
- .set_link_led = elink_848xx_set_link_led,
- .phy_specific_func = elink_848xx_specific_func
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_REARM_LATCH_SIGNAL,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_848x3_config_init,
+ .read_status = (read_status_t)elink_848xx_read_status,
+ .link_reset = (link_reset_t)elink_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_848xx_format_ver,
+ .hw_reset = (hw_reset_t)elink_84833_hw_reset_phy,
+ .set_link_led = (set_link_led_t)elink_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_848xx_specific_func
};
-static const struct elink_phy phy_54618se = {
- .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE,
- .addr = 0xff,
- .def_md_devad = 0,
- .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
- .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
- .mdio_ctrl = 0,
- .supported = (ELINK_SUPPORTED_10baseT_Half |
- ELINK_SUPPORTED_10baseT_Full |
- ELINK_SUPPORTED_100baseT_Half |
- ELINK_SUPPORTED_100baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_TP |
- ELINK_SUPPORTED_Autoneg |
- ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
- .media_type = ELINK_ETH_PHY_BASE_T,
- .ver_addr = 0,
- .req_flow_ctrl = 0,
- .req_line_speed = 0,
- .speed_cap_mask = 0,
- /* req_duplex = */ 0,
- /* rsrv = */ 0,
- .config_init = elink_54618se_config_init,
- .read_status = elink_54618se_read_status,
- .link_reset = elink_54618se_link_reset,
- .config_loopback = elink_54618se_config_loopback,
- .format_fw_ver = NULL,
- .hw_reset = NULL,
- .set_link_led = elink_5461x_set_link_led,
- .phy_specific_func = elink_54618se_specific_func
+static const struct elink_phy phy_84858 = {
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
+ ELINK_FLAGS_REARM_LATCH_SIGNAL,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)elink_848x3_config_init,
+ .read_status = (read_status_t)elink_848xx_read_status,
+ .link_reset = (link_reset_t)elink_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)elink_848xx_format_ver,
+ .hw_reset = (hw_reset_t)elink_84833_hw_reset_phy,
+ .set_link_led = (set_link_led_t)elink_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_848xx_specific_func
};
+
+static const struct elink_phy phy_54618se = {
+ .type = PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause),
+ .media_type = ELINK_ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ /* req_duplex = */0,
+ /* rsrv = */0,
+ .config_init = (config_init_t)elink_54618se_config_init,
+ .read_status = (read_status_t)elink_54618se_read_status,
+ .link_reset = (link_reset_t)elink_54618se_link_reset,
+ .config_loopback = (config_loopback_t)elink_54618se_config_loopback,
+ .format_fw_ver = (format_fw_ver_t)NULL,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)elink_5461x_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)elink_54618se_specific_func
+};
/*****************************************************************/
/* */
/* Populate the phy according. Main function: elink_populate_phy */
@@ -11161,9 +13038,9 @@ static const struct elink_phy phy_54618se = {
/*****************************************************************/
static void elink_populate_preemphasis(struct bnx2x_softc *sc,
- uint32_t shmem_base,
- struct elink_phy *phy, uint8_t port,
- uint8_t phy_index)
+ uint32_t shmem_base,
+ struct elink_phy *phy, uint8_t port,
+ uint8_t phy_index)
{
/* Get the 4 lanes xgxs config rx and tx */
uint32_t rx = 0, tx = 0, i;
@@ -11175,23 +13052,19 @@ static void elink_populate_preemphasis(struct bnx2x_softc *sc,
if (phy_index == ELINK_INT_PHY || phy_index == ELINK_EXT_PHY1) {
rx = REG_RD(sc, shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- xgxs_config_rx[i << 1]));
+ dev_info.port_hw_config[port].xgxs_config_rx[i << 1]));
tx = REG_RD(sc, shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- xgxs_config_tx[i << 1]));
+ dev_info.port_hw_config[port].xgxs_config_tx[i << 1]));
} else {
rx = REG_RD(sc, shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- xgxs_config2_rx[i << 1]));
+ dev_info.port_hw_config[port].xgxs_config2_rx[i << 1]));
tx = REG_RD(sc, shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- xgxs_config2_rx[i << 1]));
+ dev_info.port_hw_config[port].xgxs_config2_rx[i << 1]));
}
phy->rx_preemphasis[i << 1] = ((rx >> 16) & 0xffff);
@@ -11199,65 +13072,62 @@ static void elink_populate_preemphasis(struct bnx2x_softc *sc,
phy->tx_preemphasis[i << 1] = ((tx >> 16) & 0xffff);
phy->tx_preemphasis[(i << 1) + 1] = (tx & 0xffff);
+ ELINK_DEBUG_P2(sc, "phy->rx_preemphasis = %x, phy->tx_preemphasis = %x",
+ phy->rx_preemphasis[i << 1],
+ phy->tx_preemphasis[i << 1]);
}
}
static uint32_t elink_get_ext_phy_config(struct bnx2x_softc *sc,
- uint32_t shmem_base, uint8_t phy_index,
- uint8_t port)
+ uint32_t shmem_base,
+ uint8_t phy_index, uint8_t port)
{
uint32_t ext_phy_config = 0;
switch (phy_index) {
case ELINK_EXT_PHY1:
ext_phy_config = REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- external_phy_config));
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].external_phy_config));
break;
case ELINK_EXT_PHY2:
ext_phy_config = REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- external_phy_config2));
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].external_phy_config2));
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Invalid phy_index %d", phy_index);
+ ELINK_DEBUG_P1(sc, "Invalid phy_index %d", phy_index);
return ELINK_STATUS_ERROR;
}
return ext_phy_config;
}
-
static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
- uint32_t shmem_base, uint8_t port,
- struct elink_phy *phy)
+ uint32_t shmem_base, uint8_t port,
+ struct elink_phy *phy)
{
uint32_t phy_addr;
- __rte_unused uint32_t chip_id;
+ uint32_t chip_id;
uint32_t switch_cfg = (REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.
- port_feature_config[port].
- link_config)) &
- PORT_FEATURE_CONNECTED_SWITCH_MASK);
- chip_id =
- (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
- ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);
-
- PMD_DRV_LOG(DEBUG, sc, ":chip_id = 0x%x", chip_id);
+ offsetof(struct shmem_region,
+ dev_info.port_feature_config[port].link_config)) &
+ PORT_FEATURE_CONNECTED_SWITCH_MASK);
+ chip_id = (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
+ ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);
+
+ ELINK_DEBUG_P1(sc, ":chip_id = 0x%x", chip_id);
if (USES_WARPCORE(sc)) {
uint32_t serdes_net_if;
- phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
+ phy_addr = REG_RD(sc,
+ MISC_REG_WC0_CTRL_PHY_ADDR);
*phy = phy_warpcore;
if (REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR) == 0x3)
phy->flags |= ELINK_FLAGS_4_PORT_MODE;
else
phy->flags &= ~ELINK_FLAGS_4_PORT_MODE;
- /* Check Dual mode */
+ /* Check Dual mode */
serdes_net_if = (REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- default_cfg)) &
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[port].default_cfg)) &
PORT_HW_CFG_NET_SERDES_IF_MASK);
/* Set the appropriate supported and flags indications per
* interface type of the chip
@@ -11293,8 +13163,8 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
break;
case PORT_HW_CFG_NET_SERDES_IF_KR:
phy->media_type = ELINK_ETH_PHY_KR;
- phy->supported &= (ELINK_SUPPORTED_1000baseT_Full |
- ELINK_SUPPORTED_10000baseT_Full |
+ phy->supported &= (ELINK_SUPPORTED_1000baseKX_Full |
+ ELINK_SUPPORTED_10000baseKR_Full |
ELINK_SUPPORTED_FIBRE |
ELINK_SUPPORTED_Autoneg |
ELINK_SUPPORTED_Pause |
@@ -11312,8 +13182,8 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
phy->media_type = ELINK_ETH_PHY_KR;
phy->flags |= ELINK_FLAGS_WC_DUAL_MODE;
phy->supported &= (ELINK_SUPPORTED_20000baseKR2_Full |
- ELINK_SUPPORTED_10000baseT_Full |
- ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_10000baseKR_Full |
+ ELINK_SUPPORTED_1000baseKX_Full |
ELINK_SUPPORTED_Autoneg |
ELINK_SUPPORTED_FIBRE |
ELINK_SUPPORTED_Pause |
@@ -11321,8 +13191,8 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK;
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Unknown WC interface type 0x%x",
- serdes_net_if);
+ ELINK_DEBUG_P1(sc, "Unknown WC interface type 0x%x",
+ serdes_net_if);
break;
}
@@ -11334,6 +13204,8 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
phy->flags |= ELINK_FLAGS_MDC_MDIO_WA;
else
phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_B0;
+ ELINK_DEBUG_P3(sc, "media_type = %x, flags = %x, supported = %x",
+ phy->media_type, phy->flags, phy->supported);
} else {
switch (switch_cfg) {
case ELINK_SWITCH_CFG_1G:
@@ -11349,32 +13221,32 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
*phy = phy_xgxs;
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Invalid switch_cfg");
+ ELINK_DEBUG_P0(sc, "Invalid switch_cfg");
return ELINK_STATUS_ERROR;
}
}
- phy->addr = (uint8_t) phy_addr;
+ phy->addr = (uint8_t)phy_addr;
phy->mdio_ctrl = elink_get_emac_base(sc,
- SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH,
- port);
+ SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH,
+ port);
if (CHIP_IS_E2(sc))
phy->def_md_devad = ELINK_E2_DEFAULT_PHY_DEV_ADDR;
else
phy->def_md_devad = ELINK_DEFAULT_PHY_DEV_ADDR;
- PMD_DRV_LOG(DEBUG, sc, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x",
- port, phy->addr, phy->mdio_ctrl);
+ ELINK_DEBUG_P3(sc, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x",
+ port, phy->addr, phy->mdio_ctrl);
elink_populate_preemphasis(sc, shmem_base, phy, port, ELINK_INT_PHY);
return ELINK_STATUS_OK;
}
static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
- uint8_t phy_index,
- uint32_t shmem_base,
- uint32_t shmem2_base,
- uint8_t port,
- struct elink_phy *phy)
+ uint8_t phy_index,
+ uint32_t shmem_base,
+ uint32_t shmem2_base,
+ uint8_t port,
+ struct elink_phy *phy)
{
uint32_t ext_phy_config, phy_type, config2;
uint32_t mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH;
@@ -11420,10 +13292,13 @@ static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834:
*phy = phy_84834;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858:
+ *phy = phy_84858;
+ break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54616:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE:
+ case PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE:
*phy = phy_54618se;
- if (phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
+ if (phy_type == PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BNX2X54618SE)
phy->flags |= ELINK_FLAGS_EEE;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -11449,21 +13324,20 @@ static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
* the address
*/
config2 = REG_RD(sc, shmem_base + offsetof(struct shmem_region,
- dev_info.shared_hw_config.
- config2));
+ dev_info.shared_hw_config.config2));
if (phy_index == ELINK_EXT_PHY1) {
phy->ver_addr = shmem_base + offsetof(struct shmem_region,
- port_mb[port].
- ext_phy_fw_version);
+ port_mb[port].ext_phy_fw_version);
/* Check specific mdc mdio settings */
if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK)
mdc_mdio_access = config2 &
- SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK;
+ SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK;
} else {
uint32_t size = REG_RD(sc, shmem2_base);
- if (size > offsetof(struct shmem2_region, ext_phy_fw_version2)) {
+ if (size >
+ offsetof(struct shmem2_region, ext_phy_fw_version2)) {
phy->ver_addr = shmem2_base +
offsetof(struct shmem2_region,
ext_phy_fw_version2[port]);
@@ -11471,35 +13345,34 @@ static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
/* Check specific mdc mdio settings */
if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK)
mdc_mdio_access = (config2 &
- SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK)
- >> (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT -
- SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT);
+ SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) >>
+ (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT -
+ SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT);
}
phy->mdio_ctrl = elink_get_emac_base(sc, mdc_mdio_access, port);
- if (((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) &&
- (phy->ver_addr)) {
+ if (elink_is_8483x_8485x(phy) && (phy->ver_addr)) {
/* Remove 100Mb link supported for BNX2X84833/4 when phy fw
* version lower than or equal to 1.39
*/
uint32_t raw_ver = REG_RD(sc, phy->ver_addr);
- if (((raw_ver & 0x7F) <= 39) && (((raw_ver & 0xF80) >> 7) <= 1))
+ if (((raw_ver & 0x7F) <= 39) &&
+ (((raw_ver & 0xF80) >> 7) <= 1))
phy->supported &= ~(ELINK_SUPPORTED_100baseT_Half |
ELINK_SUPPORTED_100baseT_Full);
}
- PMD_DRV_LOG(DEBUG, sc, "phy_type 0x%x port %d found in index %d",
- phy_type, port, phy_index);
- PMD_DRV_LOG(DEBUG, sc, " addr=0x%x, mdio_ctl=0x%x",
- phy->addr, phy->mdio_ctrl);
+ ELINK_DEBUG_P3(sc, "phy_type 0x%x port %d found in index %d",
+ phy_type, port, phy_index);
+ ELINK_DEBUG_P2(sc, " addr=0x%x, mdio_ctl=0x%x",
+ phy->addr, phy->mdio_ctrl);
return ELINK_STATUS_OK;
}
static elink_status_t elink_populate_phy(struct bnx2x_softc *sc,
- uint8_t phy_index, uint32_t shmem_base,
- uint32_t shmem2_base, uint8_t port,
- struct elink_phy *phy)
+ uint8_t phy_index, uint32_t shmem_base,
+ uint32_t shmem2_base, uint8_t port,
+ struct elink_phy *phy)
{
elink_status_t status = ELINK_STATUS_OK;
phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN;
@@ -11511,50 +13384,44 @@ static elink_status_t elink_populate_phy(struct bnx2x_softc *sc,
}
static void elink_phy_def_cfg(struct elink_params *params,
- struct elink_phy *phy, uint8_t phy_index)
+ struct elink_phy *phy,
+ uint8_t phy_index)
{
struct bnx2x_softc *sc = params->sc;
uint32_t link_config;
/* Populate the default phy configuration for MF mode */
if (phy_index == ELINK_EXT_PHY2) {
link_config = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config
- [params->port].link_config2));
- phy->speed_cap_mask =
- REG_RD(sc,
- params->shmem_base + offsetof(struct shmem_region,
- dev_info.port_hw_config
- [params->port].
- speed_capability_mask2));
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].link_config2));
+ phy->speed_cap_mask = REG_RD(sc, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.
+ port_hw_config[params->port].speed_capability_mask2));
} else {
link_config = REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_feature_config
- [params->port].link_config));
- phy->speed_cap_mask =
- REG_RD(sc,
- params->shmem_base + offsetof(struct shmem_region,
- dev_info.port_hw_config
- [params->port].
- speed_capability_mask));
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].link_config));
+ phy->speed_cap_mask = REG_RD(sc, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.
+ port_hw_config[params->port].speed_capability_mask));
}
-
- PMD_DRV_LOG(DEBUG, sc,
- "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x",
- phy_index, link_config, phy->speed_cap_mask);
+ ELINK_DEBUG_P3(sc,
+ "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x",
+ phy_index, link_config, phy->speed_cap_mask);
phy->req_duplex = DUPLEX_FULL;
- switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
+ switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_10M_HALF:
phy->req_duplex = DUPLEX_HALF;
- /* fall-through */
+ /* fallthrough */
case PORT_FEATURE_LINK_SPEED_10M_FULL:
phy->req_line_speed = ELINK_SPEED_10;
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
phy->req_duplex = DUPLEX_HALF;
- /* fall-through */
+ /* fallthrough */
case PORT_FEATURE_LINK_SPEED_100M_FULL:
phy->req_line_speed = ELINK_SPEED_100;
break;
@@ -11572,7 +13439,10 @@ static void elink_phy_def_cfg(struct elink_params *params,
break;
}
- switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) {
+ ELINK_DEBUG_P2(sc, "Default config phy idx %x, req_duplex config %x",
+ phy_index, phy->req_duplex);
+
+ switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) {
case PORT_FEATURE_FLOW_CONTROL_AUTO:
phy->req_flow_ctrl = ELINK_FLOW_CTRL_AUTO;
break;
@@ -11589,6 +13459,9 @@ static void elink_phy_def_cfg(struct elink_params *params,
phy->req_flow_ctrl = ELINK_FLOW_CTRL_NONE;
break;
}
+ ELINK_DEBUG_P3(sc, "Requested Duplex = %x, line_speed = %x, flow_ctrl = %x",
+ phy->req_duplex, phy->req_line_speed,
+ phy->req_flow_ctrl);
}
uint32_t elink_phy_selection(struct elink_params *params)
@@ -11597,25 +13470,24 @@ uint32_t elink_phy_selection(struct elink_params *params)
uint32_t return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT;
phy_config_swapped = params->multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
- prio_cfg = params->multi_phy_config & PORT_HW_CFG_PHY_SELECTION_MASK;
+ prio_cfg = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SELECTION_MASK;
if (phy_config_swapped) {
switch (prio_cfg) {
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
- return_cfg =
- PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY;
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY;
break;
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
- return_cfg =
- PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY;
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY;
break;
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
- return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
break;
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
- return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
break;
}
} else
@@ -11624,19 +13496,23 @@ uint32_t elink_phy_selection(struct elink_params *params)
return return_cfg;
}
-elink_status_t elink_phy_probe(struct elink_params * params)
+elink_status_t elink_phy_probe(struct elink_params *params)
{
uint8_t phy_index, actual_phy_idx;
uint32_t phy_config_swapped, sync_offset, media_types;
struct bnx2x_softc *sc = params->sc;
struct elink_phy *phy;
params->num_phys = 0;
- PMD_DRV_LOG(DEBUG, sc, "Begin phy probe");
-
+ ELINK_DEBUG_P0(sc, "Begin phy probe");
+#ifdef ELINK_INCLUDE_EMUL
+ if (CHIP_REV_IS_EMUL(sc))
+ return ELINK_STATUS_OK;
+#endif
phy_config_swapped = params->multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
- for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) {
+ for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS;
+ phy_index++) {
actual_phy_idx = phy_index;
if (phy_config_swapped) {
if (phy_index == ELINK_EXT_PHY1)
@@ -11644,18 +13520,19 @@ elink_status_t elink_phy_probe(struct elink_params * params)
else if (phy_index == ELINK_EXT_PHY2)
actual_phy_idx = ELINK_EXT_PHY1;
}
- PMD_DRV_LOG(DEBUG, sc, "phy_config_swapped %x, phy_index %x,"
- " actual_phy_idx %x", phy_config_swapped,
- phy_index, actual_phy_idx);
+ ELINK_DEBUG_P3(sc, "phy_config_swapped %x, phy_index %x,"
+ " actual_phy_idx %x", phy_config_swapped,
+ phy_index, actual_phy_idx);
phy = &params->phy[actual_phy_idx];
if (elink_populate_phy(sc, phy_index, params->shmem_base,
params->shmem2_base, params->port,
phy) != ELINK_STATUS_OK) {
params->num_phys = 0;
- PMD_DRV_LOG(DEBUG, sc, "phy probe failed in phy index %d",
- phy_index);
+ ELINK_DEBUG_P1(sc, "phy probe failed in phy index %d",
+ phy_index);
for (phy_index = ELINK_INT_PHY;
- phy_index < ELINK_MAX_PHYS; phy_index++)
+ phy_index < ELINK_MAX_PHYS;
+ phy_index++)
*phy = phy_null;
return ELINK_STATUS_ERROR;
}
@@ -11671,8 +13548,8 @@ elink_status_t elink_phy_probe(struct elink_params * params)
phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_G;
sync_offset = params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].media_type);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].media_type);
media_types = REG_RD(sc, sync_offset);
/* Update media type for non-PMF sync only for the first time
@@ -11683,9 +13560,9 @@ elink_status_t elink_phy_probe(struct elink_params * params)
(PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
actual_phy_idx))) == 0) {
media_types |= ((phy->media_type &
- PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
- (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
- actual_phy_idx));
+ PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
+ (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
+ actual_phy_idx));
}
REG_WR(sc, sync_offset, media_types);
@@ -11693,48 +13570,231 @@ elink_status_t elink_phy_probe(struct elink_params * params)
params->num_phys++;
}
- PMD_DRV_LOG(DEBUG, sc,
- "End phy probe. #phys found %x", params->num_phys);
+ ELINK_DEBUG_P1(sc, "End phy probe. #phys found %x", params->num_phys);
return ELINK_STATUS_OK;
}
-static void elink_init_bmac_loopback(struct elink_params *params,
- struct elink_vars *vars)
+#ifdef ELINK_INCLUDE_EMUL
+static elink_status_t elink_init_e3_emul_mac(struct elink_params *params,
+ struct elink_vars *vars)
+{
+ struct bnx2x_softc *sc = params->sc;
+ vars->line_speed = params->req_line_speed[0];
+ /* In case link speed is auto, set speed the highest as possible */
+ if (params->req_line_speed[0] == ELINK_SPEED_AUTO_NEG) {
+ if (params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC)
+ vars->line_speed = ELINK_SPEED_2500;
+ else if (elink_is_4_port_mode(sc))
+ vars->line_speed = ELINK_SPEED_10000;
+ else
+ vars->line_speed = ELINK_SPEED_20000;
+ }
+ if (vars->line_speed < ELINK_SPEED_10000) {
+ if ((params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC)) {
+ ELINK_DEBUG_P1(sc, "Invalid line speed %d while UMAC is"
+ " disabled!", params->req_line_speed[0]);
+ return ELINK_STATUS_ERROR;
+ }
+ switch (vars->line_speed) {
+ case ELINK_SPEED_10:
+ vars->link_status = ELINK_LINK_10TFD;
+ break;
+ case ELINK_SPEED_100:
+ vars->link_status = ELINK_LINK_100TXFD;
+ break;
+ case ELINK_SPEED_1000:
+ vars->link_status = ELINK_LINK_1000TFD;
+ break;
+ case ELINK_SPEED_2500:
+ vars->link_status = ELINK_LINK_2500TFD;
+ break;
+ default:
+ ELINK_DEBUG_P1(sc, "Invalid line speed %d for UMAC",
+ vars->line_speed);
+ return ELINK_STATUS_ERROR;
+ }
+ vars->link_status |= LINK_STATUS_LINK_UP;
+
+ if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
+ elink_umac_enable(params, vars, 1);
+ else
+ elink_umac_enable(params, vars, 0);
+ } else {
+ /* Link speed >= 10000 requires XMAC enabled */
+ if (params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC) {
+ ELINK_DEBUG_P1(sc, "Invalid line speed %d while XMAC is"
+ " disabled!", params->req_line_speed[0]);
+ return ELINK_STATUS_ERROR;
+ }
+ /* Check link speed */
+ switch (vars->line_speed) {
+ case ELINK_SPEED_10000:
+ vars->link_status = ELINK_LINK_10GTFD;
+ break;
+ case ELINK_SPEED_20000:
+ vars->link_status = ELINK_LINK_20GTFD;
+ break;
+ default:
+ ELINK_DEBUG_P1(sc, "Invalid line speed %d for XMAC",
+ vars->line_speed);
+ return ELINK_STATUS_ERROR;
+ }
+ vars->link_status |= LINK_STATUS_LINK_UP;
+ if (params->loopback_mode == ELINK_LOOPBACK_XMAC)
+ elink_xmac_enable(params, vars, 1);
+ else
+ elink_xmac_enable(params, vars, 0);
+ }
+ return ELINK_STATUS_OK;
+}
+
+static elink_status_t elink_init_emul(struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
+ if (CHIP_IS_E3(sc)) {
+ if (elink_init_e3_emul_mac(params, vars) !=
+ ELINK_STATUS_OK)
+ return ELINK_STATUS_ERROR;
+ } else {
+ if (params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC) {
+ vars->line_speed = ELINK_SPEED_1000;
+ vars->link_status = (LINK_STATUS_LINK_UP |
+ ELINK_LINK_1000XFD);
+ if (params->loopback_mode ==
+ ELINK_LOOPBACK_EMAC)
+ elink_emac_enable(params, vars, 1);
+ else
+ elink_emac_enable(params, vars, 0);
+ } else {
+ vars->line_speed = ELINK_SPEED_10000;
+ vars->link_status = (LINK_STATUS_LINK_UP |
+ ELINK_LINK_10GTFD);
+ if (params->loopback_mode ==
+ ELINK_LOOPBACK_BMAC)
+ elink_bmac_enable(params, vars, 1, 1);
+ else
+ elink_bmac_enable(params, vars, 0, 1);
+ }
+ }
vars->link_up = 1;
- vars->line_speed = ELINK_SPEED_10000;
vars->duplex = DUPLEX_FULL;
vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
- vars->mac_type = ELINK_MAC_TYPE_BMAC;
- vars->phy_flags = PHY_XGXS_FLAG;
-
- elink_xgxs_deassert(params);
+ if (CHIP_IS_E1x(sc))
+ elink_pbf_update(params, vars->flow_ctrl,
+ vars->line_speed);
+ /* Disable drain */
+ REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
- /* Set bmac loopback */
- elink_bmac_enable(params, vars, 1, 1);
+ /* update shared memory */
+ elink_update_mng(params, vars->link_status);
+ return ELINK_STATUS_OK;
+}
+#endif
+#ifdef ELINK_INCLUDE_FPGA
+static elink_status_t elink_init_fpga(struct elink_params *params,
+ struct elink_vars *vars)
+{
+ /* Enable on E1.5 FPGA */
+ struct bnx2x_softc *sc = params->sc;
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
+ if (!(CHIP_IS_E1(sc))) {
+ vars->flow_ctrl = (ELINK_FLOW_CTRL_TX |
+ ELINK_FLOW_CTRL_RX);
+ vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
+ LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
+ }
+ if (CHIP_IS_E3(sc)) {
+ vars->line_speed = params->req_line_speed[0];
+ switch (vars->line_speed) {
+ case ELINK_SPEED_AUTO_NEG:
+ vars->line_speed = ELINK_SPEED_2500;
+ case ELINK_SPEED_2500:
+ vars->link_status = ELINK_LINK_2500TFD;
+ break;
+ case ELINK_SPEED_1000:
+ vars->link_status = ELINK_LINK_1000XFD;
+ break;
+ case ELINK_SPEED_100:
+ vars->link_status = ELINK_LINK_100TXFD;
+ break;
+ case ELINK_SPEED_10:
+ vars->link_status = ELINK_LINK_10TFD;
+ break;
+ default:
+ ELINK_DEBUG_P1(sc, "Invalid link speed %d",
+ params->req_line_speed[0]);
+ return ELINK_STATUS_ERROR;
+ }
+ vars->link_status |= LINK_STATUS_LINK_UP;
+ if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
+ elink_umac_enable(params, vars, 1);
+ else
+ elink_umac_enable(params, vars, 0);
+ } else {
+ vars->line_speed = ELINK_SPEED_10000;
+ vars->link_status = (LINK_STATUS_LINK_UP | ELINK_LINK_10GTFD);
+ if (params->loopback_mode == ELINK_LOOPBACK_EMAC)
+ elink_emac_enable(params, vars, 1);
+ else
+ elink_emac_enable(params, vars, 0);
+ }
+ vars->link_up = 1;
+ if (CHIP_IS_E1x(sc))
+ elink_pbf_update(params, vars->flow_ctrl,
+ vars->line_speed);
+ /* Disable drain */
REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
+
+ /* Update shared memory */
+ elink_update_mng(params, vars->link_status);
+ return ELINK_STATUS_OK;
+}
+#endif
+static void elink_init_bmac_loopback(struct elink_params *params,
+ struct elink_vars *vars)
+{
+ struct bnx2x_softc *sc = params->sc;
+ vars->link_up = 1;
+ vars->line_speed = ELINK_SPEED_10000;
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
+ vars->mac_type = ELINK_MAC_TYPE_BMAC;
+
+ vars->phy_flags = PHY_XGXS_FLAG;
+
+ elink_xgxs_deassert(params);
+
+ /* Set bmac loopback */
+ elink_bmac_enable(params, vars, 1, 1);
+
+ REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}
static void elink_init_emac_loopback(struct elink_params *params,
struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
- vars->link_up = 1;
- vars->line_speed = ELINK_SPEED_1000;
- vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
- vars->mac_type = ELINK_MAC_TYPE_EMAC;
+ vars->link_up = 1;
+ vars->line_speed = ELINK_SPEED_1000;
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
+ vars->mac_type = ELINK_MAC_TYPE_EMAC;
- vars->phy_flags = PHY_XGXS_FLAG;
+ vars->phy_flags = PHY_XGXS_FLAG;
- elink_xgxs_deassert(params);
- /* Set bmac loopback */
- elink_emac_enable(params, vars, 1);
- elink_emac_program(params, vars);
- REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
+ elink_xgxs_deassert(params);
+ /* Set bmac loopback */
+ elink_emac_enable(params, vars, 1);
+ elink_emac_program(params, vars);
+ REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}
static void elink_init_xmac_loopback(struct elink_params *params,
@@ -11755,8 +13815,9 @@ static void elink_init_xmac_loopback(struct elink_params *params,
*/
elink_set_aer_mmd(params, &params->phy[0]);
elink_warpcore_reset_lane(sc, &params->phy[0], 0);
- params->phy[ELINK_INT_PHY].config_loopback(&params->phy[ELINK_INT_PHY],
- params);
+ params->phy[ELINK_INT_PHY].config_loopback(
+ &params->phy[ELINK_INT_PHY],
+ params);
elink_xmac_enable(params, vars, 1);
REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
@@ -11818,12 +13879,11 @@ static void elink_init_xgxs_loopback(struct elink_params *params,
/* Set external phy loopback */
uint8_t phy_index;
for (phy_index = ELINK_EXT_PHY1;
- phy_index < params->num_phys; phy_index++)
+ phy_index < params->num_phys; phy_index++)
if (params->phy[phy_index].config_loopback)
- params->phy[phy_index].config_loopback(&params->
- phy
- [phy_index],
- params);
+ params->phy[phy_index].config_loopback(
+ &params->phy[phy_index],
+ params);
}
REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
@@ -11840,12 +13900,14 @@ void elink_set_rx_filter(struct elink_params *params, uint8_t en)
val |= en * 0x20;
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + params->port * 4, val);
- REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + params->port * 4, en * 0x3);
+ if (!CHIP_IS_E1(sc)) {
+ REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + params->port * 4,
+ en * 0x3);
+ }
REG_WR(sc, (params->port ? NIG_REG_LLH1_BRB1_NOT_MCP :
NIG_REG_LLH0_BRB1_NOT_MCP), en);
}
-
static elink_status_t elink_avoid_link_flap(struct elink_params *params,
struct elink_vars *vars)
{
@@ -11853,6 +13915,7 @@ static elink_status_t elink_avoid_link_flap(struct elink_params *params,
uint32_t dont_clear_stat, lfa_sts;
struct bnx2x_softc *sc = params->sc;
+ elink_set_mdio_emac_per_phy(sc, params);
/* Sync the link parameters */
elink_link_status_update(params, vars);
@@ -11864,7 +13927,7 @@ static elink_status_t elink_avoid_link_flap(struct elink_params *params,
for (phy_idx = ELINK_INT_PHY; phy_idx < params->num_phys; phy_idx++) {
struct elink_phy *phy = &params->phy[phy_idx];
if (phy->phy_specific_func) {
- PMD_DRV_LOG(DEBUG, sc, "Calling PHY specific func");
+ ELINK_DEBUG_P0(sc, "Calling PHY specific func");
phy->phy_specific_func(phy, params, ELINK_PHY_INIT);
}
if ((phy->media_type == ELINK_ETH_PHY_SFPP_10G_FIBER) ||
@@ -11873,7 +13936,8 @@ static elink_status_t elink_avoid_link_flap(struct elink_params *params,
elink_verify_sfp_module(phy, params);
}
lfa_sts = REG_RD(sc, params->lfa_base +
- offsetof(struct shmem_lfa, lfa_sts));
+ offsetof(struct shmem_lfa,
+ lfa_sts));
dont_clear_stat = lfa_sts & SHMEM_LFA_DONT_CLEAR_STAT;
@@ -11984,13 +14048,12 @@ elink_status_t elink_phy_init(struct elink_params *params,
{
int lfa_status;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, sc, "Phy Initialization started");
- PMD_DRV_LOG(DEBUG, sc, "(1) req_speed %d, req_flowctrl %d",
- params->req_line_speed[0], params->req_flow_ctrl[0]);
- PMD_DRV_LOG(DEBUG, sc, "(2) req_speed %d, req_flowctrl %d",
- params->req_line_speed[1], params->req_flow_ctrl[1]);
- PMD_DRV_LOG(DEBUG, sc,
- "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv);
+ ELINK_DEBUG_P0(sc, "Phy Initialization started");
+ ELINK_DEBUG_P2(sc, "(1) req_speed %d, req_flowctrl %d",
+ params->req_line_speed[0], params->req_flow_ctrl[0]);
+ ELINK_DEBUG_P2(sc, "(2) req_speed %d, req_flowctrl %d",
+ params->req_line_speed[1], params->req_flow_ctrl[1]);
+ ELINK_DEBUG_P1(sc, "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv);
vars->link_status = 0;
vars->phy_link_up = 0;
vars->link_up = 0;
@@ -12003,17 +14066,33 @@ elink_status_t elink_phy_init(struct elink_params *params,
params->link_flags = ELINK_PHY_INITIALIZED;
/* Driver opens NIG-BRB filters */
elink_set_rx_filter(params, 1);
+ elink_chng_link_count(params, 1);
/* Check if link flap can be avoided */
lfa_status = elink_check_lfa(params);
+ ELINK_DEBUG_P3(sc, " params : port = %x, loopback_mode = %x req_duplex = %x",
+ params->port, params->loopback_mode,
+ params->req_duplex[0]);
+ ELINK_DEBUG_P3(sc, " params : switch_cfg = %x, lane_config = %x req_duplex[1] = %x",
+ params->switch_cfg, params->lane_config,
+ params->req_duplex[1]);
+ ELINK_DEBUG_P3(sc, " params : chip_id = %x, feature_config_flags = %x, num_phys = %x",
+ params->chip_id, params->feature_config_flags,
+ params->num_phys);
+ ELINK_DEBUG_P3(sc, " params : rsrv = %x, eee_mode = %x, hw_led_mode = %x",
+ params->rsrv, params->eee_mode, params->hw_led_mode);
+ ELINK_DEBUG_P3(sc, " params : multi_phy = %x, req_fc_auto_adv = %x, link_flags = %x",
+ params->multi_phy_config, params->req_fc_auto_adv,
+ params->link_flags);
+ ELINK_DEBUG_P2(sc, " params : lfa_base = %x, link_attr = %x",
+ params->lfa_base, params->link_attr_sync);
if (lfa_status == 0) {
- PMD_DRV_LOG(DEBUG, sc,
- "Link Flap Avoidance in progress");
+ ELINK_DEBUG_P0(sc, "Link Flap Avoidance in progress");
return elink_avoid_link_flap(params, vars);
}
- PMD_DRV_LOG(DEBUG, sc,
- "Cannot avoid link flap lfa_sta=0x%x", lfa_status);
+ ELINK_DEBUG_P1(sc, "Cannot avoid link flap lfa_sta=0x%x",
+ lfa_status);
elink_cannot_avoid_link_flap(params, vars, lfa_status);
/* Disable attentions */
@@ -12022,20 +14101,34 @@ elink_status_t elink_phy_init(struct elink_params *params,
ELINK_NIG_MASK_XGXS0_LINK10G |
ELINK_NIG_MASK_SERDES0_LINK_STATUS |
ELINK_NIG_MASK_MI_INT));
+#ifdef ELINK_INCLUDE_EMUL
+ if (!(params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC))
+#endif
- elink_emac_init(params);
+ elink_emac_init(params, vars);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
vars->link_status |= LINK_STATUS_PFC_ENABLED;
- if ((params->num_phys == 0) && !CHIP_REV_IS_SLOW(sc)) {
- PMD_DRV_LOG(DEBUG, sc, "No phy found for initialization !!");
+ if ((params->num_phys == 0) &&
+ !CHIP_REV_IS_SLOW(sc)) {
+ ELINK_DEBUG_P0(sc, "No phy found for initialization !!");
return ELINK_STATUS_ERROR;
}
set_phy_vars(params, vars);
- PMD_DRV_LOG(DEBUG, sc, "Num of phys on board: %d", params->num_phys);
-
+ ELINK_DEBUG_P1(sc, "Num of phys on board: %d", params->num_phys);
+#ifdef ELINK_INCLUDE_FPGA
+ if (CHIP_REV_IS_FPGA(sc)) {
+ return elink_init_fpga(params, vars);
+ } else
+#endif
+#ifdef ELINK_INCLUDE_EMUL
+ if (CHIP_REV_IS_EMUL(sc)) {
+ return elink_init_emul(params, vars);
+ } else
+#endif
switch (params->loopback_mode) {
case ELINK_LOOPBACK_BMAC:
elink_init_bmac_loopback(params, vars);
@@ -12071,15 +14164,16 @@ elink_status_t elink_phy_init(struct elink_params *params,
return ELINK_STATUS_OK;
}
-static elink_status_t elink_link_reset(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t reset_ext_phy)
+elink_status_t elink_link_reset(struct elink_params *params,
+ struct elink_vars *vars,
+ uint8_t reset_ext_phy)
{
struct bnx2x_softc *sc = params->sc;
uint8_t phy_index, port = params->port, clear_latch_ind = 0;
- PMD_DRV_LOG(DEBUG, sc, "Resetting the link of port %d", port);
+ ELINK_DEBUG_P1(sc, "Resetting the link of port %d", port);
/* Disable attentions */
vars->link_status = 0;
+ elink_chng_link_count(params, 1);
elink_update_mng(params, vars->link_status);
vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK |
SHMEM_EEE_ACTIVE_BIT);
@@ -12098,12 +14192,24 @@ static elink_status_t elink_link_reset(struct elink_params *params,
REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0);
REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0);
}
- if (!CHIP_IS_E3(sc))
- elink_set_bmac_rx(sc, port, 0);
- if (CHIP_IS_E3(sc) && !CHIP_REV_IS_FPGA(sc)) {
- elink_set_xmac_rxtx(params, 0);
- elink_set_umac_rxtx(params, 0);
- }
+
+#ifdef ELINK_INCLUDE_EMUL
+ /* Stop BigMac rx */
+ if (!(params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC))
+#endif
+ if (!CHIP_IS_E3(sc))
+ elink_set_bmac_rx(sc, params->chip_id, port, 0);
+#ifdef ELINK_INCLUDE_EMUL
+ /* Stop XMAC/UMAC rx */
+ if (!(params->feature_config_flags &
+ ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC))
+#endif
+ if (CHIP_IS_E3(sc) &&
+ !CHIP_REV_IS_FPGA(sc)) {
+ elink_set_xmac_rxtx(params, 0);
+ elink_set_umac_rxtx(params, 0);
+ }
/* Disable emac */
if (!CHIP_IS_E3(sc))
REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0);
@@ -12112,20 +14218,19 @@ static elink_status_t elink_link_reset(struct elink_params *params,
/* The PHY reset is controlled by GPIO 1
* Hold it as vars low
*/
- /* Clear link led */
+ /* Clear link led */
elink_set_mdio_emac_per_phy(sc, params);
elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0);
if (reset_ext_phy && (!CHIP_REV_IS_SLOW(sc))) {
for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
- phy_index++) {
+ phy_index++) {
if (params->phy[phy_index].link_reset) {
elink_set_aer_mmd(params,
&params->phy[phy_index]);
- params->phy[phy_index].link_reset(&params->
- phy
- [phy_index],
- params);
+ params->phy[phy_index].link_reset(
+ &params->phy[phy_index],
+ params);
}
if (params->phy[phy_index].flags &
ELINK_FLAGS_REARM_LATCH_SIGNAL)
@@ -12139,11 +14244,12 @@ static elink_status_t elink_link_reset(struct elink_params *params,
elink_bits_dis(sc, NIG_REG_LATCH_BC_0 + port * 4,
1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT);
}
+#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
+ if (!CHIP_REV_IS_SLOW(sc))
+#endif
if (params->phy[ELINK_INT_PHY].link_reset)
- params->phy[ELINK_INT_PHY].link_reset(&params->
- phy
- [ELINK_INT_PHY],
- params);
+ params->phy[ELINK_INT_PHY].link_reset(
+ &params->phy[ELINK_INT_PHY], params);
/* Disable nig ingress interface */
if (!CHIP_IS_E3(sc)) {
@@ -12153,8 +14259,8 @@ static elink_status_t elink_link_reset(struct elink_params *params,
REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0);
REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0);
} else {
- uint32_t xmac_base =
- (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+ uint32_t xmac_base = (params->port) ? GRCBASE_XMAC1 :
+ GRCBASE_XMAC0;
elink_set_xumac_nig(params, 0, 0);
if (REG_RD(sc, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)
@@ -12165,9 +14271,8 @@ static elink_status_t elink_link_reset(struct elink_params *params,
vars->phy_flags = 0;
return ELINK_STATUS_OK;
}
-
-elink_status_t elink_lfa_reset(struct elink_params * params,
- struct elink_vars * vars)
+elink_status_t elink_lfa_reset(struct elink_params *params,
+ struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
vars->link_up = 0;
@@ -12186,13 +14291,13 @@ elink_status_t elink_lfa_reset(struct elink_params * params,
* are passed.
*/
if (!CHIP_IS_E3(sc))
- elink_set_bmac_rx(sc, params->port, 0);
+ elink_set_bmac_rx(sc, params->chip_id, params->port, 0);
if (CHIP_IS_E3(sc)) {
elink_set_xmac_rxtx(params, 0);
elink_set_umac_rxtx(params, 0);
}
- /* Wait 10ms for the pipe to clean up */
+ /* Wait 10ms for the pipe to clean up*/
DELAY(1000 * 10);
/* Clean the NIG-BRB using the network filters in a way that will
@@ -12207,7 +14312,7 @@ elink_status_t elink_lfa_reset(struct elink_params * params,
* minimum management protocol down time.
*/
if (!CHIP_IS_E3(sc))
- elink_set_bmac_rx(sc, params->port, 1);
+ elink_set_bmac_rx(sc, params->chip_id, params->port, 1);
if (CHIP_IS_E3(sc)) {
elink_set_xmac_rxtx(params, 1);
@@ -12222,10 +14327,10 @@ elink_status_t elink_lfa_reset(struct elink_params * params,
/* Common function */
/****************************************************************************/
static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[],
- uint8_t phy_index,
- __rte_unused uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ uint32_t shmem2_base_path[],
+ uint8_t phy_index,
+ __rte_unused uint32_t chip_id)
{
struct elink_phy phy[PORT_MAX];
struct elink_phy *phy_blk[PORT_MAX];
@@ -12233,8 +14338,8 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
int8_t port = 0;
int8_t port_of_path = 0;
uint32_t swap_val, swap_override;
- swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
- swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
+ swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
+ swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
port ^= (swap_val && swap_override);
elink_ext_phy_hw_reset(sc, port);
/* PART1 - Reset both phys */
@@ -12255,7 +14360,7 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port_of_path, &phy[port]) !=
ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "populate_phy failed");
+ ELINK_DEBUG_P0(sc, "populate_phy failed");
return ELINK_STATUS_ERROR;
}
/* Disable attentions */
@@ -12270,11 +14375,14 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
* to write to access its registers
*/
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+ port);
/* Reset the phy */
elink_cl45_write(sc, &phy[port],
- MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL,
+ 1 << 15);
}
/* Add delay of 150ms after reset */
@@ -12295,8 +14403,8 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
else
port_of_path = 0;
- PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x",
- phy_blk[port]->addr);
+ ELINK_DEBUG_P1(sc, "Loading spirom for phy address 0x%x",
+ phy_blk[port]->addr);
if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
port_of_path))
return ELINK_STATUS_ERROR;
@@ -12309,7 +14417,8 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
/* Phase1 of TX_POWER_DOWN reset */
elink_cl45_write(sc, phy_blk[port],
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_POWER_DOWN, (val | 1 << 10));
+ MDIO_PMA_REG_TX_POWER_DOWN,
+ (val | 1 << 10));
}
/* Toggle Transmitter: Power down and then up with 600ms delay
@@ -12326,9 +14435,9 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
MDIO_PMA_REG_TX_POWER_DOWN, &val);
elink_cl45_write(sc, phy_blk[port],
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_POWER_DOWN,
- (val & (~(1 << 10))));
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_POWER_DOWN,
+ (val & (~(1 << 10))));
DELAY(1000 * 15);
/* Read modify write the SPI-ROM version select register */
@@ -12341,16 +14450,15 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
/* set GPIO2 back to LOW */
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
}
return ELINK_STATUS_OK;
}
-
static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[],
- uint8_t phy_index,
- __rte_unused uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ uint32_t shmem2_base_path[],
+ uint8_t phy_index,
+ __rte_unused uint32_t chip_id)
{
uint32_t val;
int8_t port;
@@ -12359,8 +14467,8 @@ static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc,
/* Enable the module detection interrupt */
val = REG_RD(sc, MISC_REG_GPIO_EVENT_EN);
val |= ((1 << MISC_REGISTERS_GPIO_3) |
- (1 <<
- (MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
+ (1 << (MISC_REGISTERS_GPIO_3 +
+ MISC_REGISTERS_GPIO_PORT_SHIFT)));
REG_WR(sc, MISC_REG_GPIO_EVENT_EN, val);
elink_ext_phy_hw_reset(sc, 0);
@@ -12378,33 +14486,33 @@ static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc,
}
/* Extract the ext phy address for the port */
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
- port, &phy) != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
+ port, &phy) !=
+ ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc, "populate phy failed");
return ELINK_STATUS_ERROR;
}
- /* Reset phy */
+ /* Reset phy*/
elink_cl45_write(sc, &phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);
+
/* Set fault module detected LED on */
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_0,
- MISC_REGISTERS_GPIO_HIGH, port);
+ MISC_REGISTERS_GPIO_HIGH,
+ port);
}
return ELINK_STATUS_OK;
}
-
static void elink_get_ext_phy_reset_gpio(struct bnx2x_softc *sc,
- uint32_t shmem_base, uint8_t * io_gpio,
- uint8_t * io_port)
+ uint32_t shmem_base,
+ uint8_t *io_gpio, uint8_t *io_port)
{
uint32_t phy_gpio_reset = REG_RD(sc, shmem_base +
- offsetof(struct shmem_region,
- dev_info.
- port_hw_config[PORT_0].
- default_cfg));
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[PORT_0].default_cfg));
switch (phy_gpio_reset) {
case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0:
*io_gpio = 0;
@@ -12445,10 +14553,10 @@ static void elink_get_ext_phy_reset_gpio(struct bnx2x_softc *sc,
}
static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[],
- uint8_t phy_index,
- __rte_unused uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ uint32_t shmem2_base_path[],
+ uint8_t phy_index,
+ __rte_unused uint32_t chip_id)
{
int8_t port, reset_gpio;
uint32_t swap_val, swap_override;
@@ -12465,18 +14573,17 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
* Default is GPIO1, PORT1
*/
elink_get_ext_phy_reset_gpio(sc, shmem_base_path[0],
- (uint8_t *) & reset_gpio,
- (uint8_t *) & port);
+ (uint8_t *)&reset_gpio, (uint8_t *)&port);
/* Calculate the port based on port swap */
port ^= (swap_val && swap_override);
- /* Initiate PHY reset */
+ /* Initiate PHY reset*/
elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW,
- port);
+ port);
DELAY(1000 * 1);
elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH,
- port);
+ port);
DELAY(1000 * 5);
@@ -12498,8 +14605,8 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
/* Extract the ext phy address for the port */
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port_of_path, &phy[port]) !=
- ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
+ ELINK_STATUS_OK) {
+ ELINK_DEBUG_P0(sc, "populate phy failed");
return ELINK_STATUS_ERROR;
}
/* disable attentions */
@@ -12510,6 +14617,7 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
ELINK_NIG_MASK_SERDES0_LINK_STATUS |
ELINK_NIG_MASK_MI_INT));
+
/* Reset the phy */
elink_cl45_write(sc, &phy[port],
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
@@ -12530,25 +14638,25 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
port_of_path = port;
else
port_of_path = 0;
- PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x",
- phy_blk[port]->addr);
+ ELINK_DEBUG_P1(sc, "Loading spirom for phy address 0x%x",
+ phy_blk[port]->addr);
if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
port_of_path))
return ELINK_STATUS_ERROR;
/* Disable PHY transmitter output */
elink_cl45_write(sc, phy_blk[port],
- MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, 1);
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_DISABLE, 1);
}
return ELINK_STATUS_OK;
}
static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- __rte_unused uint32_t
- shmem2_base_path[],
- __rte_unused uint8_t
- phy_index, uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ __rte_unused uint32_t shmem2_base_path[],
+ __rte_unused uint8_t phy_index,
+ uint32_t chip_id)
{
uint8_t reset_gpios;
reset_gpios = elink_84833_get_reset_gpios(sc, shmem_base_path, chip_id);
@@ -12557,17 +14665,15 @@ static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc,
DELAY(10);
elink_cb_gpio_mult_write(sc, reset_gpios,
MISC_REGISTERS_GPIO_OUTPUT_HIGH);
- PMD_DRV_LOG(DEBUG, sc,
- "84833 reset pulse on pin values 0x%x", reset_gpios);
+ ELINK_DEBUG_P1(sc, "84833 reset pulse on pin values 0x%x",
+ reset_gpios);
return ELINK_STATUS_OK;
}
-
static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc,
- uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[],
- uint8_t phy_index,
- uint32_t ext_phy_type,
- uint32_t chip_id)
+ uint32_t shmem_base_path[],
+ uint32_t shmem2_base_path[],
+ uint8_t phy_index,
+ uint32_t ext_phy_type, uint32_t chip_id)
{
elink_status_t rc = ELINK_STATUS_OK;
@@ -12595,44 +14701,50 @@ static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84858:
/* GPIO3's are linked, and so both need to be toggled
* to obtain required 2us pulse.
*/
rc = elink_84833_common_init_phy(sc, shmem_base_path,
- shmem2_base_path,
- phy_index, chip_id);
+ shmem2_base_path,
+ phy_index, chip_id);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
rc = ELINK_STATUS_ERROR;
break;
default:
- PMD_DRV_LOG(DEBUG, sc,
- "ext_phy 0x%x common init not required",
- ext_phy_type);
+ ELINK_DEBUG_P1(sc,
+ "ext_phy 0x%x common init not required",
+ ext_phy_type);
break;
}
if (rc != ELINK_STATUS_OK)
- elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, 0); // "Warning: PHY was not initialized,"
- // " Port %d",
+ elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, 0);
+ /* "Warning: PHY was not initialized,"
+ * " Port %d",
+ */
return rc;
}
-elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
- uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[],
- uint32_t chip_id,
- __rte_unused uint8_t one_port_enabled)
+elink_status_t elink_common_init_phy(struct bnx2x_softc *sc,
+ uint32_t shmem_base_path[],
+ uint32_t shmem2_base_path[], uint32_t chip_id,
+ __rte_unused uint8_t one_port_enabled)
{
elink_status_t rc = ELINK_STATUS_OK;
uint32_t phy_ver, val;
uint8_t phy_index = 0;
uint32_t ext_phy_type, ext_phy_config;
+#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
+ if (CHIP_REV_IS_EMUL(sc) || CHIP_REV_IS_FPGA(sc))
+ return ELINK_STATUS_OK;
+#endif
- elink_set_mdio_clk(sc, GRCBASE_EMAC0);
- elink_set_mdio_clk(sc, GRCBASE_EMAC1);
- PMD_DRV_LOG(DEBUG, sc, "Begin common phy init");
+ elink_set_mdio_clk(sc, chip_id, GRCBASE_EMAC0);
+ elink_set_mdio_clk(sc, chip_id, GRCBASE_EMAC1);
+ ELINK_DEBUG_P0(sc, "Begin common phy init");
if (CHIP_IS_E3(sc)) {
/* Enable EPIO */
val = REG_RD(sc, MISC_REG_GEN_PURP_HWG);
@@ -12643,14 +14755,14 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
offsetof(struct shmem_region,
port_mb[PORT_0].ext_phy_fw_version));
if (phy_ver) {
- PMD_DRV_LOG(DEBUG, sc, "Not doing common init; phy ver is 0x%x",
- phy_ver);
+ ELINK_DEBUG_P1(sc, "Not doing common init; phy ver is 0x%x",
+ phy_ver);
return ELINK_STATUS_OK;
}
/* Read the ext_phy_type for arbitrary port(0) */
for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
- phy_index++) {
+ phy_index++) {
ext_phy_config = elink_get_ext_phy_config(sc,
shmem_base_path[0],
phy_index, 0);
@@ -12673,10 +14785,9 @@ static void elink_check_over_curr(struct elink_params *params,
cfg_pin = (REG_RD(sc, params->shmem_base +
offsetof(struct shmem_region,
- dev_info.port_hw_config[port].
- e3_cmn_pin_cfg1)) &
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg1)) &
PORT_HW_CFG_E3_OVER_CURRENT_MASK) >>
- PORT_HW_CFG_E3_OVER_CURRENT_SHIFT;
+ PORT_HW_CFG_E3_OVER_CURRENT_SHIFT;
/* Ignore check if no external input PIN available */
if (elink_get_cfg_pin(sc, cfg_pin, &pin_val) != ELINK_STATUS_OK)
@@ -12684,13 +14795,16 @@ static void elink_check_over_curr(struct elink_params *params,
if (!pin_val) {
if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) {
- elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, params->port); //"Error: Power fault on Port %d has"
- // " been detected and the power to "
- // "that SFP+ module has been removed"
- // " to prevent failure of the card."
- // " Please remove the SFP+ module and"
- // " restart the system to clear this"
- // " error.",
+ elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT,
+ params->port);
+ /* "Error: Power fault on Port %d has"
+ * " been detected and the power to "
+ * "that SFP+ module has been removed"
+ * " to prevent failure of the card."
+ * " Please remove the SFP+ module and"
+ * " restart the system to clear this"
+ * " error.",
+ */
vars->phy_flags |= PHY_OVER_CURRENT_FLAG;
elink_warpcore_power_module(params, 0);
}
@@ -12700,9 +14814,9 @@ static void elink_check_over_curr(struct elink_params *params,
/* Returns 0 if no change occurred since last check; 1 otherwise. */
static uint8_t elink_analyze_link_error(struct elink_params *params,
- struct elink_vars *vars,
- uint32_t status, uint32_t phy_flag,
- uint32_t link_flag, uint8_t notify)
+ struct elink_vars *vars, uint32_t status,
+ uint32_t phy_flag, uint32_t link_flag,
+ uint8_t notify)
{
struct bnx2x_softc *sc = params->sc;
/* Compare new value with previous value */
@@ -12715,16 +14829,20 @@ static uint8_t elink_analyze_link_error(struct elink_params *params,
/* If values differ */
switch (phy_flag) {
case PHY_HALF_OPEN_CONN_FLAG:
- PMD_DRV_LOG(DEBUG, sc, "Analyze Remote Fault");
+ ELINK_DEBUG_P0(sc, "Analyze Remote Fault");
break;
case PHY_SFP_TX_FAULT_FLAG:
- PMD_DRV_LOG(DEBUG, sc, "Analyze TX Fault");
+ ELINK_DEBUG_P0(sc, "Analyze TX Fault");
break;
default:
- PMD_DRV_LOG(DEBUG, sc, "Analyze UNKNOWN");
+ ELINK_DEBUG_P0(sc, "Analyze UNKNOWN");
}
- PMD_DRV_LOG(DEBUG, sc, "Link changed:[%x %x]->%x", vars->link_up,
- old_status, status);
+ ELINK_DEBUG_P3(sc, "Link changed:[%x %x]->%x", vars->link_up,
+ old_status, status);
+
+ /* Do not touch the link in case physical link down */
+ if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
+ return 1;
/* a. Update shmem->link_status accordingly
* b. Update elink_vars->link_up
@@ -12767,17 +14885,18 @@ static uint8_t elink_analyze_link_error(struct elink_params *params,
}
/******************************************************************************
-* Description:
-* This function checks for half opened connection change indication.
-* When such change occurs, it calls the elink_analyze_link_error
-* to check if Remote Fault is set or cleared. Reception of remote fault
-* status message in the MAC indicates that the peer's MAC has detected
-* a fault, for example, due to break in the TX side of fiber.
-*
-******************************************************************************/
-static elink_status_t elink_check_half_open_conn(struct elink_params *params,
- struct elink_vars *vars,
- uint8_t notify)
+ * Description:
+ * This function checks for half opened connection change indication.
+ * When such change occurs, it calls the elink_analyze_link_error
+ * to check if Remote Fault is set or cleared. Reception of remote fault
+ * status message in the MAC indicates that the peer's MAC has detected
+ * a fault, for example, due to break in the TX side of fiber.
+ *
+ ******************************************************************************/
+static
+elink_status_t elink_check_half_open_conn(struct elink_params *params,
+ struct elink_vars *vars,
+ uint8_t notify)
{
struct bnx2x_softc *sc = params->sc;
uint32_t lss_status = 0;
@@ -12789,7 +14908,7 @@ static elink_status_t elink_check_half_open_conn(struct elink_params *params,
if (CHIP_IS_E3(sc) &&
(REG_RD(sc, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_XMAC))) {
+ (MISC_REGISTERS_RESET_REG_2_XMAC))) {
/* Check E3 XMAC */
/* Note that link speed cannot be queried here, since it may be
* zero while link is down. In case UMAC is active, LSS will
@@ -12814,7 +14933,7 @@ static elink_status_t elink_check_half_open_conn(struct elink_params *params,
uint32_t lss_status_reg;
uint32_t wb_data[2];
mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
+ NIG_REG_INGRESS_BMAC0_MEM;
/* Read BIGMAC_REGISTER_RX_LSS_STATUS */
if (CHIP_IS_E2(sc))
lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT;
@@ -12830,7 +14949,6 @@ static elink_status_t elink_check_half_open_conn(struct elink_params *params,
}
return ELINK_STATUS_OK;
}
-
static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
struct elink_params *params,
struct elink_vars *vars)
@@ -12841,15 +14959,12 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
/* Get The SFP+ TX_Fault controlling pin ([eg]pio) */
cfg_pin = (REG_RD(sc, params->shmem_base + offsetof(struct shmem_region,
- dev_info.
- port_hw_config
- [port].
- e3_cmn_pin_cfg)) &
+ dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
PORT_HW_CFG_E3_TX_FAULT_MASK) >>
- PORT_HW_CFG_E3_TX_FAULT_SHIFT;
+ PORT_HW_CFG_E3_TX_FAULT_SHIFT;
if (elink_get_cfg_pin(sc, cfg_pin, &value)) {
- PMD_DRV_LOG(DEBUG, sc, "Failed to read pin 0x%02x", cfg_pin);
+ ELINK_DEBUG_P1(sc, "Failed to read pin 0x%02x", cfg_pin);
return;
}
@@ -12871,24 +14986,25 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
/* If module is unapproved, led should be on regardless */
if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
- PMD_DRV_LOG(DEBUG, sc, "Change TX_Fault LED: ->%x",
- led_mode);
+ ELINK_DEBUG_P1(sc, "Change TX_Fault LED: ->%x",
+ led_mode);
elink_set_e3_module_fault_led(params, led_mode);
}
}
}
-
static void elink_kr2_recovery(struct elink_params *params,
- struct elink_vars *vars, struct elink_phy *phy)
+ struct elink_vars *vars,
+ struct elink_phy *phy)
{
- PMD_DRV_LOG(DEBUG, params->sc, "KR2 recovery");
-
+ struct bnx2x_softc *sc = params->sc;
+ ELINK_DEBUG_P0(sc, "KR2 recovery");
elink_warpcore_enable_AN_KR2(phy, params, vars);
elink_warpcore_restart_AN_KR(phy, params);
}
static void elink_check_kr2_wa(struct elink_params *params,
- struct elink_vars *vars, struct elink_phy *phy)
+ struct elink_vars *vars,
+ struct elink_phy *phy)
{
struct bnx2x_softc *sc = params->sc;
uint16_t base_page, next_page, not_kr2_device, lane;
@@ -12906,14 +15022,14 @@ static void elink_check_kr2_wa(struct elink_params *params,
sigdet = elink_warpcore_get_sigdet(phy, params);
if (!sigdet) {
- if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+ if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
elink_kr2_recovery(params, vars, phy);
- PMD_DRV_LOG(DEBUG, sc, "No sigdet");
+ ELINK_DEBUG_P0(sc, "No sigdet");
}
return;
}
- lane = elink_get_warpcore_lane(params);
+ lane = elink_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
@@ -12924,9 +15040,9 @@ static void elink_check_kr2_wa(struct elink_params *params,
/* CL73 has not begun yet */
if (base_page == 0) {
- if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+ if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
elink_kr2_recovery(params, vars, phy);
- PMD_DRV_LOG(DEBUG, sc, "No BP");
+ ELINK_DEBUG_P0(sc, "No BP");
}
return;
}
@@ -12940,10 +15056,10 @@ static void elink_check_kr2_wa(struct elink_params *params,
((next_page & 0xe0) == 0x20))));
/* In case KR2 is already disabled, check if we need to re-enable it */
- if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+ if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
if (!not_kr2_device) {
- PMD_DRV_LOG(DEBUG, sc, "BP=0x%x, NP=0x%x", base_page,
- next_page);
+ ELINK_DEBUG_P2(sc, "BP=0x%x, NP=0x%x", base_page,
+ next_page);
elink_kr2_recovery(params, vars, phy);
}
return;
@@ -12951,8 +15067,7 @@ static void elink_check_kr2_wa(struct elink_params *params,
/* KR2 is enabled, but not KR2 device */
if (not_kr2_device) {
/* Disable KR2 on both lanes */
- PMD_DRV_LOG(DEBUG, sc,
- "BP=0x%x, NP=0x%x", base_page, next_page);
+ ELINK_DEBUG_P2(sc, "BP=0x%x, NP=0x%x", base_page, next_page);
elink_disable_kr2(params, vars, phy);
/* Restart AN on leading lane */
elink_warpcore_restart_AN_KR(phy, params);
@@ -12968,9 +15083,8 @@ void elink_period_func(struct elink_params *params, struct elink_vars *vars)
if (params->phy[phy_idx].flags & ELINK_FLAGS_TX_ERROR_CHECK) {
elink_set_aer_mmd(params, &params->phy[phy_idx]);
if (elink_check_half_open_conn(params, vars, 1) !=
- ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "Fault detection failed");
- }
+ ELINK_STATUS_OK)
+ ELINK_DEBUG_P0(sc, "Fault detection failed");
break;
}
}
@@ -12978,22 +15092,24 @@ void elink_period_func(struct elink_params *params, struct elink_vars *vars)
if (CHIP_IS_E3(sc)) {
struct elink_phy *phy = &params->phy[ELINK_INT_PHY];
elink_set_aer_mmd(params, phy);
- if ((phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) &&
- (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
+ if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
+ (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
+ (phy->req_line_speed == ELINK_SPEED_20000))
elink_check_kr2_wa(params, vars, phy);
elink_check_over_curr(params, vars);
if (vars->rx_tx_asic_rst)
elink_warpcore_config_runtime(phy, params, vars);
if ((REG_RD(sc, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].
- default_cfg))
- & PORT_HW_CFG_NET_SERDES_IF_MASK) ==
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg))
+ & PORT_HW_CFG_NET_SERDES_IF_MASK) ==
PORT_HW_CFG_NET_SERDES_IF_SFI) {
- if (elink_is_sfp_module_plugged(params)) {
+ if (elink_is_sfp_module_plugged(phy, params)) {
elink_sfp_tx_fault_detection(phy, params, vars);
- } else if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) {
+ } else if (vars->link_status &
+ LINK_STATUS_SFP_TX_FAULT) {
/* Clean trail, interrupt corrects the leds */
vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT;
vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG;
@@ -13005,17 +15121,18 @@ void elink_period_func(struct elink_params *params, struct elink_vars *vars)
}
uint8_t elink_fan_failure_det_req(struct bnx2x_softc *sc,
- uint32_t shmem_base,
- uint32_t shmem2_base, uint8_t port)
+ uint32_t shmem_base,
+ uint32_t shmem2_base,
+ uint8_t port)
{
uint8_t phy_index, fan_failure_det_req = 0;
struct elink_phy phy;
for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
- phy_index++) {
+ phy_index++) {
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port, &phy)
!= ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
+ ELINK_DEBUG_P0(sc, "populate phy failed");
return 0;
}
fan_failure_det_req |= (phy.flags &
@@ -13035,24 +15152,27 @@ void elink_hw_reset_phy(struct elink_params *params)
ELINK_NIG_MASK_SERDES0_LINK_STATUS |
ELINK_NIG_MASK_MI_INT));
- for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) {
+ for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS;
+ phy_index++) {
if (params->phy[phy_index].hw_reset) {
- params->phy[phy_index].hw_reset(&params->phy[phy_index],
- params);
+ params->phy[phy_index].hw_reset(
+ &params->phy[phy_index],
+ params);
params->phy[phy_index] = phy_null;
}
}
}
void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
- __rte_unused uint32_t chip_id, uint32_t shmem_base,
- uint32_t shmem2_base, uint8_t port)
+ uint32_t chip_id, uint32_t shmem_base,
+ uint32_t shmem2_base,
+ uint8_t port)
{
uint8_t gpio_num = 0xff, gpio_port = 0xff, phy_index;
uint32_t val;
uint32_t offset, aeu_mask, swap_val, swap_override, sync_offset;
if (CHIP_IS_E3(sc)) {
- if (elink_get_mod_abs_int_cfg(sc,
+ if (elink_get_mod_abs_int_cfg(sc, chip_id,
shmem_base,
port,
&gpio_num,
@@ -13061,11 +15181,11 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
} else {
struct elink_phy phy;
for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
- phy_index++) {
+ phy_index++) {
if (elink_populate_phy(sc, phy_index, shmem_base,
shmem2_base, port, &phy)
!= ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
+ ELINK_DEBUG_P0(sc, "populate phy failed");
return;
}
if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726) {
@@ -13088,15 +15208,15 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
gpio_port ^= (swap_val && swap_override);
vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 <<
- (gpio_num + (gpio_port << 2));
+ (gpio_num + (gpio_port << 2));
sync_offset = shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].aeu_int_mask);
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].aeu_int_mask);
REG_WR(sc, sync_offset, vars->aeu_int_mask);
- PMD_DRV_LOG(DEBUG, sc, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x",
- gpio_num, gpio_port, vars->aeu_int_mask);
+ ELINK_DEBUG_P3(sc, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x",
+ gpio_num, gpio_port, vars->aeu_int_mask);
if (port == 0)
offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
diff --git a/drivers/net/bnx2x/elink.h b/drivers/net/bnx2x/elink.h
index 40000c2..c8b08bc 100644
--- a/drivers/net/bnx2x/elink.h
+++ b/drivers/net/bnx2x/elink.h
@@ -14,7 +14,7 @@
#ifndef ELINK_H
#define ELINK_H
-#define ELINK_DEBUG
+#include "bnx2x_logs.h"
@@ -29,6 +29,11 @@ struct bnx2x_softc;
extern uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr);
extern void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val);
+/* wb_write - pointer to 2 32 bits vars to be passed to the DMAE*/
+extern void elink_cb_reg_wb_write(struct bnx2x_softc *sc, uint32_t offset,
+ uint32_t *wb_write, uint16_t len);
+extern void elink_cb_reg_wb_read(struct bnx2x_softc *sc, uint32_t offset,
+ uint32_t *wb_write, uint16_t len);
/* mode - 0( LOW ) /1(HIGH)*/
extern uint8_t elink_cb_gpio_write(struct bnx2x_softc *sc,
@@ -45,6 +50,9 @@ extern uint8_t elink_cb_gpio_int_write(struct bnx2x_softc *sc,
extern uint32_t elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param);
+/* Delay */
+extern void elink_cb_udelay(struct bnx2x_softc *sc, uint32_t microsecond);
+
/* This function is called every 1024 bytes downloading of phy firmware.
Driver can use it to print to screen indication for download progress */
extern void elink_cb_download_progress(struct bnx2x_softc *sc, uint32_t cur, uint32_t total);
@@ -69,6 +77,8 @@ typedef enum elink_status {
extern void elink_cb_event_log(struct bnx2x_softc *sc, const elink_log_id_t log_id, ...);
extern void elink_cb_load_warpcore_microcode(void);
+extern uint8_t elink_cb_path_id(struct bnx2x_softc *sc);
+
extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc);
#define ELINK_EVENT_LOG_LEVEL_ERROR 1
@@ -78,6 +88,32 @@ extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc);
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
/* Debug prints */
+#ifdef ELINK_DEBUG
+
+extern void elink_cb_dbg(struct bnx2x_softc *sc, const char *fmt);
+extern void elink_cb_dbg1(struct bnx2x_softc *sc, const char *fmt,
+ uint32_t arg1);
+extern void elink_cb_dbg2(struct bnx2x_softc *sc, const char *fmt,
+ uint32_t arg1, uint32_t arg2);
+extern void elink_cb_dbg3(struct bnx2x_softc *sc, const char *fmt,
+ uint32_t arg1, uint32_t arg2,
+ uint32_t arg3);
+
+#define ELINK_DEBUG_P0(sc, fmt) elink_cb_dbg(sc, fmt)
+#define ELINK_DEBUG_P1(sc, fmt, arg1) elink_cb_dbg1(sc, fmt, arg1)
+#define ELINK_DEBUG_P2(sc, fmt, arg1, arg2) \
+ elink_cb_dbg2(sc, fmt, arg1, arg2)
+#define ELINK_DEBUG_P3(sc, fmt, arg1, arg2, arg3) \
+ elink_cb_dbg3(sc, fmt, arg1, arg2, arg3)
+#else
+#define ELINK_DEBUG_P0(sc, fmt) PMD_DRV_LOG(DEBUG, sc, fmt)
+#define ELINK_DEBUG_P1(sc, fmt, arg1) \
+ PMD_DRV_LOG(DEBUG, sc, fmt, arg1)
+#define ELINK_DEBUG_P2(sc, fmt, arg1, arg2) \
+ PMD_DRV_LOG(DEBUG, sc, fmt, arg1, arg2)
+#define ELINK_DEBUG_P3(sc, fmt, arg1, arg2, arg3) \
+ PMD_DRV_LOG(DEBUG, sc, fmt, arg1, arg2, arg3)
+#endif
/***********************************************************/
/* Defines */
@@ -126,9 +162,12 @@ extern void elink_cb_notify_link_changed(struct bnx2x_softc *sc);
#define ELINK_SFP_EEPROM_DATE_SIZE 6
#define ELINK_SFP_EEPROM_DIAG_TYPE_ADDR 0x5c
#define ELINK_SFP_EEPROM_DIAG_TYPE_SIZE 1
-#define ELINK_SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1<<2)
+#define ELINK_SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1 << 2)
#define ELINK_SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e
#define ELINK_SFP_EEPROM_SFF_8472_COMP_SIZE 1
+#define ELINK_SFP_EEPROM_VENDOR_SPECIFIC_ADDR 0x60
+#define ELINK_SFP_EEPROM_VENDOR_SPECIFIC_SIZE 16
+
#define ELINK_SFP_EEPROM_A2_CHECKSUM_RANGE 0x5e
#define ELINK_SFP_EEPROM_A2_CC_DMI_ADDR 0x5f
@@ -199,7 +238,7 @@ typedef void (*link_reset_t)(struct elink_phy *phy,
struct elink_params *params);
typedef void (*config_loopback_t)(struct elink_phy *phy,
struct elink_params *params);
-typedef uint8_t (*format_fw_ver_t)(uint32_t raw, uint8_t *str, uint16_t *len);
+typedef elink_status_t (*format_fw_ver_t)(uint32_t raw, uint8_t *str, uint16_t *len);
typedef void (*hw_reset_t)(struct elink_phy *phy, struct elink_params *params);
typedef void (*set_link_led_t)(struct elink_phy *phy,
struct elink_params *params, uint8_t mode);
@@ -219,23 +258,23 @@ struct elink_phy {
uint8_t def_md_devad;
uint16_t flags;
/* No Over-Current detection */
-#define ELINK_FLAGS_NOC (1<<1)
+#define ELINK_FLAGS_NOC (1 << 1)
/* Fan failure detection required */
-#define ELINK_FLAGS_FAN_FAILURE_DET_REQ (1<<2)
+#define ELINK_FLAGS_FAN_FAILURE_DET_REQ (1 << 2)
/* Initialize first the XGXS and only then the phy itself */
-#define ELINK_FLAGS_INIT_XGXS_FIRST (1<<3)
-#define ELINK_FLAGS_WC_DUAL_MODE (1<<4)
-#define ELINK_FLAGS_4_PORT_MODE (1<<5)
-#define ELINK_FLAGS_REARM_LATCH_SIGNAL (1<<6)
-#define ELINK_FLAGS_SFP_NOT_APPROVED (1<<7)
-#define ELINK_FLAGS_MDC_MDIO_WA (1<<8)
-#define ELINK_FLAGS_DUMMY_READ (1<<9)
-#define ELINK_FLAGS_MDC_MDIO_WA_B0 (1<<10)
-#define ELINK_FLAGS_SFP_MODULE_PLUGGED_IN_WC (1<<11)
-#define ELINK_FLAGS_TX_ERROR_CHECK (1<<12)
-#define ELINK_FLAGS_EEE (1<<13)
-#define ELINK_FLAGS_TEMPERATURE (1<<14)
-#define ELINK_FLAGS_MDC_MDIO_WA_G (1<<15)
+#define ELINK_FLAGS_INIT_XGXS_FIRST (1 << 3)
+#define ELINK_FLAGS_WC_DUAL_MODE (1 << 4)
+#define ELINK_FLAGS_4_PORT_MODE (1 << 5)
+#define ELINK_FLAGS_REARM_LATCH_SIGNAL (1 << 6)
+#define ELINK_FLAGS_SFP_NOT_APPROVED (1 << 7)
+#define ELINK_FLAGS_MDC_MDIO_WA (1 << 8)
+#define ELINK_FLAGS_DUMMY_READ (1 << 9)
+#define ELINK_FLAGS_MDC_MDIO_WA_B0 (1 << 10)
+#define ELINK_FLAGS_SFP_MODULE_PLUGGED_IN_WC (1 << 11)
+#define ELINK_FLAGS_TX_ERROR_CHECK (1 << 12)
+#define ELINK_FLAGS_EEE (1 << 13)
+#define ELINK_FLAGS_TEMPERATURE (1 << 14)
+#define ELINK_FLAGS_MDC_MDIO_WA_G (1 << 15)
/* preemphasis values for the rx side */
uint16_t rx_preemphasis[4];
@@ -247,20 +286,22 @@ struct elink_phy {
uint32_t mdio_ctrl;
uint32_t supported;
-#define ELINK_SUPPORTED_10baseT_Half (1<<0)
-#define ELINK_SUPPORTED_10baseT_Full (1<<1)
-#define ELINK_SUPPORTED_100baseT_Half (1<<2)
-#define ELINK_SUPPORTED_100baseT_Full (1<<3)
-#define ELINK_SUPPORTED_1000baseT_Full (1<<4)
-#define ELINK_SUPPORTED_2500baseX_Full (1<<5)
-#define ELINK_SUPPORTED_10000baseT_Full (1<<6)
-#define ELINK_SUPPORTED_TP (1<<7)
-#define ELINK_SUPPORTED_FIBRE (1<<8)
-#define ELINK_SUPPORTED_Autoneg (1<<9)
-#define ELINK_SUPPORTED_Pause (1<<10)
-#define ELINK_SUPPORTED_Asym_Pause (1<<11)
-#define ELINK_SUPPORTED_20000baseMLD2_Full (1<<21)
-#define ELINK_SUPPORTED_20000baseKR2_Full (1<<22)
+#define ELINK_SUPPORTED_10baseT_Half (1 << 0)
+#define ELINK_SUPPORTED_10baseT_Full (1 << 1)
+#define ELINK_SUPPORTED_100baseT_Half (1 << 2)
+#define ELINK_SUPPORTED_100baseT_Full (1 << 3)
+#define ELINK_SUPPORTED_1000baseT_Full (1 << 4)
+#define ELINK_SUPPORTED_2500baseX_Full (1 << 5)
+#define ELINK_SUPPORTED_10000baseT_Full (1 << 6)
+#define ELINK_SUPPORTED_TP (1 << 7)
+#define ELINK_SUPPORTED_FIBRE (1 << 8)
+#define ELINK_SUPPORTED_Autoneg (1 << 9)
+#define ELINK_SUPPORTED_Pause (1 << 10)
+#define ELINK_SUPPORTED_Asym_Pause (1 << 11)
+#define ELINK_SUPPORTED_1000baseKX_Full (1 << 17)
+#define ELINK_SUPPORTED_10000baseKR_Full (1 << 19)
+#define ELINK_SUPPORTED_20000baseMLD2_Full (1 << 21)
+#define ELINK_SUPPORTED_20000baseKR2_Full (1 << 22)
uint32_t media_type;
#define ELINK_ETH_PHY_UNSPECIFIED 0x0
@@ -353,17 +394,22 @@ struct elink_params {
/* features */
uint32_t feature_config_flags;
-#define ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define ELINK_FEATURE_CONFIG_PFC_ENABLED (1<<1)
-#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
-#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
-#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX (1<<8)
-#define ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9)
-#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10)
-#define ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET (1<<11)
-#define ELINK_FEATURE_CONFIG_IEEE_PHY_TEST (1<<12)
-#define ELINK_FEATURE_CONFIG_MT_SUPPORT (1<<13)
-#define ELINK_FEATURE_CONFIG_BOOT_FROM_SAN (1<<14)
+#define ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1 << 0)
+#define ELINK_FEATURE_CONFIG_PFC_ENABLED (1 << 1)
+#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1 << 2)
+#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1 << 3)
+#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC (1 << 4)
+#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC (1 << 5)
+#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC (1 << 6)
+#define ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC (1 << 7)
+#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX (1 << 8)
+#define ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED (1 << 9)
+#define ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1 << 10)
+#define ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET (1 << 11)
+#define ELINK_FEATURE_CONFIG_IEEE_PHY_TEST (1 << 12)
+#define ELINK_FEATURE_CONFIG_MT_SUPPORT (1 << 13)
+#define ELINK_FEATURE_CONFIG_BOOT_FROM_SAN (1 << 14)
+#define ELINK_FEATURE_CONFIG_DISABLE_PD (1 << 15)
/* Will be populated during common init */
struct elink_phy phy[ELINK_MAX_PHYS];
@@ -391,10 +437,10 @@ struct elink_params {
#define ELINK_EEE_MODE_NVRAM_LATENCY_TIME (0x6000)
#define ELINK_EEE_MODE_NVRAM_MASK (0x3)
#define ELINK_EEE_MODE_TIMER_MASK (0xfffff)
-#define ELINK_EEE_MODE_OUTPUT_TIME (1<<28)
-#define ELINK_EEE_MODE_OVERRIDE_NVRAM (1<<29)
-#define ELINK_EEE_MODE_ENABLE_LPI (1<<30)
-#define ELINK_EEE_MODE_ADV_LPI (1<<31)
+#define ELINK_EEE_MODE_OUTPUT_TIME (1 << 28)
+#define ELINK_EEE_MODE_OVERRIDE_NVRAM (1 << 29)
+#define ELINK_EEE_MODE_ENABLE_LPI (1 << 30)
+#define ELINK_EEE_MODE_ADV_LPI (1 << 31)
uint16_t hw_led_mode; /* part of the hw_config read from the shmem */
uint32_t multi_phy_config;
@@ -404,20 +450,23 @@ struct elink_params {
uint16_t req_fc_auto_adv; /* Should be set to TX / BOTH when
req_flow_ctrl is set to AUTO */
uint16_t link_flags;
-#define ELINK_LINK_FLAGS_INT_DISABLED (1<<0)
-#define ELINK_PHY_INITIALIZED (1<<1)
+#define ELINK_LINK_FLAGS_INT_DISABLED (1 << 0)
+#define ELINK_PHY_INITIALIZED (1 << 1)
uint32_t lfa_base;
+
+ /* The same definitions as the shmem2 parameter */
+ uint32_t link_attr_sync;
};
/* Output parameters */
struct elink_vars {
uint8_t phy_flags;
-#define PHY_XGXS_FLAG (1<<0)
-#define PHY_SGMII_FLAG (1<<1)
-#define PHY_PHYSICAL_LINK_FLAG (1<<2)
-#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
-#define PHY_OVER_CURRENT_FLAG (1<<4)
-#define PHY_SFP_TX_FAULT_FLAG (1<<5)
+#define PHY_XGXS_FLAG (1 << 0)
+#define PHY_SGMII_FLAG (1 << 1)
+#define PHY_PHYSICAL_LINK_FLAG (1 << 2)
+#define PHY_HALF_OPEN_CONN_FLAG (1 << 3)
+#define PHY_OVER_CURRENT_FLAG (1 << 4)
+#define PHY_SFP_TX_FAULT_FLAG (1 << 5)
uint8_t mac_type;
#define ELINK_MAC_TYPE_NONE 0
@@ -448,8 +497,7 @@ struct elink_vars {
uint8_t rx_tx_asic_rst;
uint8_t turn_to_run_wc_rt;
uint16_t rsrv2;
- /* The same definitions as the shmem2 parameter */
- uint32_t link_attr_sync;
+
};
/***********************************************************/
@@ -460,14 +508,32 @@ elink_status_t elink_phy_init(struct elink_params *params, struct elink_vars *va
/* Reset the link. Should be called when driver or interface goes down
Before calling phy firmware upgrade, the reset_ext_phy should be set
to 0 */
+elink_status_t elink_link_reset(struct elink_params *params,
+ struct elink_vars *vars,
+ uint8_t reset_ext_phy);
elink_status_t elink_lfa_reset(struct elink_params *params, struct elink_vars *vars);
/* elink_link_update should be called upon link interrupt */
elink_status_t elink_link_update(struct elink_params *params, struct elink_vars *vars);
+/* use the following phy functions to read/write from external_phy
+ * In order to use it to read/write internal phy registers, use
+ * ELINK_DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
+ * the register
+ */
+elink_status_t elink_phy_read(struct elink_params *params, uint8_t phy_addr,
+ uint8_t devad, uint16_t reg, uint16_t *ret_val);
+
+elink_status_t elink_phy_write(struct elink_params *params, uint8_t phy_addr,
+ uint8_t devad, uint16_t reg, uint16_t val);
+
/* Reads the link_status from the shmem,
and update the link vars accordingly */
void elink_link_status_update(struct elink_params *input,
struct elink_vars *output);
+/* returns string representing the fw_version of the external phy */
+elink_status_t elink_get_ext_phy_fw_version(struct elink_params *params,
+ uint8_t *version,
+ uint16_t len);
/* Set/Unset the led
Basically, the CLC takes care of the led for the link, but in case one needs
@@ -481,12 +547,34 @@ elink_status_t elink_set_led(struct elink_params *params,
#define ELINK_LED_MODE_FRONT_PANEL_OFF 3
/* elink_handle_module_detect_int should be called upon module detection
- interrupt */
+ * interrupt
+ */
void elink_handle_module_detect_int(struct elink_params *params);
+/* Get the actual link status. In case it returns ELINK_STATUS_OK, link is up,
+ * otherwise link is down
+ */
+elink_status_t elink_test_link(struct elink_params *params,
+ struct elink_vars *vars,
+ uint8_t is_serdes);
+
+
/* One-time initialization for external phy after power up */
elink_status_t elink_common_init_phy(struct bnx2x_softc *sc, uint32_t shmem_base_path[],
- uint32_t shmem2_base_path[], uint32_t chip_id, uint8_t one_port_enabled);
+ uint32_t shmem2_base_path[], uint32_t chip_id,
+ uint8_t one_port_enabled);
+
+/* Reset the external PHY using GPIO */
+void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port);
+
+/* Reset the external of SFX7101 */
+void elink_sfx7101_sp_sw_reset(struct bnx2x_softc *sc, struct elink_phy *phy);
+
+/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
+elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
+ struct elink_params *params, uint8_t dev_addr,
+ uint16_t addr, uint16_t byte_cnt,
+ uint8_t *o_buf);
void elink_hw_reset_phy(struct elink_params *params);
@@ -569,12 +657,42 @@ elink_status_t elink_update_pfc(struct elink_params *params,
struct elink_vars *vars,
struct elink_nig_brb_pfc_port_params *pfc_params);
+
+/* Used to configure the ETS to disable */
+elink_status_t elink_ets_disabled(struct elink_params *params,
+ struct elink_vars *vars);
+
+/* Used to configure the ETS to BW limited */
+void elink_ets_bw_limit(const struct elink_params *params,
+ const uint32_t cos0_bw,
+ const uint32_t cos1_bw);
+
+/* Used to configure the ETS to strict */
+elink_status_t elink_ets_strict(const struct elink_params *params,
+ const uint8_t strict_cos);
+
+
+/* Configure the COS to ETS according to BW and SP settings.*/
+elink_status_t elink_ets_e3b0_config(const struct elink_params *params,
+ const struct elink_vars *vars,
+ struct elink_ets_params *ets_params);
+/* Read pfc statistic*/
+void elink_pfc_statistic(struct elink_params *params, struct elink_vars *vars,
+ uint32_t pfc_frames_sent[2],
+ uint32_t pfc_frames_received[2]);
void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
uint32_t chip_id, uint32_t shmem_base, uint32_t shmem2_base,
uint8_t port);
+/* elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
+ * struct elink_params *params);
+ */
void elink_period_func(struct elink_params *params, struct elink_vars *vars);
+/*elink_status_t elink_check_half_open_conn(struct elink_params *params,
+ * struct elink_vars *vars, uint8_t notify);
+ */
+
void elink_enable_pmd_tx(struct elink_params *params);