move kernel modules directories

This patch moves the kernel modules code from EAL to a common place.
 - Separate the kernel module code from user space code.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>

76 files changed, 67384 insertions, 0 deletions

diff --git a/kernel/Makefile b/kernel/Makefile
new file mode 100644
index 0000000..8948d04
--- /dev/null
+++ b/kernel/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+# Copyright 2017 NXP
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linux
+DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
+
+include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/kernel/freebsd/BSDmakefile.meson b/kernel/freebsd/BSDmakefile.meson
new file mode 100644
index 0000000..42f5b2b
--- /dev/null
+++ b/kernel/freebsd/BSDmakefile.meson
@@ -0,0 +1,43 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# makefile for building kernel modules using meson
+# takes parameters from the environment
+
+# source file is passed via KMOD_SRC as full path, we only use final
+# component of it, as VPATH is used to find actual file, so as to
+# have the .o files placed in the build, not source directory
+VPATH = ${KMOD_SRC:H}
+SRCS = ${KMOD_SRC:T} device_if.h bus_if.h pci_if.h
+CFLAGS += $(KMOD_CFLAGS)
+
+.include <bsd.kmod.mk>
diff --git a/kernel/freebsd/Makefile b/kernel/freebsd/Makefile
new file mode 100644
index 0000000..c93d7a6
--- /dev/null
+++ b/kernel/freebsd/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2017 NXP
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += contigmem
+DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += nic_uio
+
+include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/kernel/freebsd/contigmem/BSDmakefile b/kernel/freebsd/contigmem/BSDmakefile
new file mode 100644
index 0000000..33ce83e
--- /dev/null
+++ b/kernel/freebsd/contigmem/BSDmakefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+#
+
+KMOD=	contigmem
+SRCS=	contigmem.c device_if.h bus_if.h
+
+.include <bsd.kmod.mk>
diff --git a/kernel/freebsd/contigmem/Makefile b/kernel/freebsd/contigmem/Makefile
new file mode 100644
index 0000000..428a7ed
--- /dev/null
+++ b/kernel/freebsd/contigmem/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# module name and path
+#
+MODULE = contigmem
+
+#
+# CFLAGS
+#
+MODULE_CFLAGS += -I$(SRCDIR)
+MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
+MODULE_CFLAGS += -Winline -Wall -Werror
+MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y := contigmem.c
+
+include $(RTE_SDK)/mk/rte.bsdmodule.mk
diff --git a/kernel/freebsd/contigmem/contigmem.c b/kernel/freebsd/contigmem/contigmem.c
new file mode 100644
index 0000000..1715b5d
--- /dev/null
+++ b/kernel/freebsd/contigmem/contigmem.c
@@ -0,0 +1,353 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/bio.h>
+#include <sys/bus.h>
+#include <sys/conf.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/module.h>
+#include <sys/proc.h>
+#include <sys/rwlock.h>
+#include <sys/systm.h>
+#include <sys/sysctl.h>
+#include <sys/vmmeter.h>
+
+#include <machine/bus.h>
+
+#include <vm/vm.h>
+#include <vm/pmap.h>
+#include <vm/vm_param.h>
+#include <vm/vm_object.h>
+#include <vm/vm_page.h>
+#include <vm/vm_pager.h>
+#include <vm/vm_phys.h>
+
+struct contigmem_buffer {
+	void           *addr;
+	int             refcnt;
+	struct mtx      mtx;
+};
+
+struct contigmem_vm_handle {
+	int             buffer_index;
+};
+
+static int              contigmem_load(void);
+static int              contigmem_unload(void);
+static int              contigmem_physaddr(SYSCTL_HANDLER_ARGS);
+
+static d_mmap_single_t  contigmem_mmap_single;
+static d_open_t         contigmem_open;
+static d_close_t        contigmem_close;
+
+static int              contigmem_num_buffers = RTE_CONTIGMEM_DEFAULT_NUM_BUFS;
+static int64_t          contigmem_buffer_size = RTE_CONTIGMEM_DEFAULT_BUF_SIZE;
+
+static eventhandler_tag contigmem_eh_tag;
+static struct contigmem_buffer contigmem_buffers[RTE_CONTIGMEM_MAX_NUM_BUFS];
+static struct cdev     *contigmem_cdev = NULL;
+static int              contigmem_refcnt;
+
+TUNABLE_INT("hw.contigmem.num_buffers", &contigmem_num_buffers);
+TUNABLE_QUAD("hw.contigmem.buffer_size", &contigmem_buffer_size);
+
+static SYSCTL_NODE(_hw, OID_AUTO, contigmem, CTLFLAG_RD, 0, "contigmem");
+
+SYSCTL_INT(_hw_contigmem, OID_AUTO, num_buffers, CTLFLAG_RD,
+	&contigmem_num_buffers, 0, "Number of contigmem buffers allocated");
+SYSCTL_QUAD(_hw_contigmem, OID_AUTO, buffer_size, CTLFLAG_RD,
+	&contigmem_buffer_size, 0, "Size of each contiguous buffer");
+SYSCTL_INT(_hw_contigmem, OID_AUTO, num_references, CTLFLAG_RD,
+	&contigmem_refcnt, 0, "Number of references to contigmem");
+
+static SYSCTL_NODE(_hw_contigmem, OID_AUTO, physaddr, CTLFLAG_RD, 0,
+	"physaddr");
+
+MALLOC_DEFINE(M_CONTIGMEM, "contigmem", "contigmem(4) allocations");
+
+static int contigmem_modevent(module_t mod, int type, void *arg)
+{
+	int error = 0;
+
+	switch (type) {
+	case MOD_LOAD:
+		error = contigmem_load();
+		break;
+	case MOD_UNLOAD:
+		error = contigmem_unload();
+		break;
+	default:
+		break;
+	}
+
+	return error;
+}
+
+moduledata_t contigmem_mod = {
+	"contigmem",
+	(modeventhand_t)contigmem_modevent,
+	0
+};
+
+DECLARE_MODULE(contigmem, contigmem_mod, SI_SUB_DRIVERS, SI_ORDER_ANY);
+MODULE_VERSION(contigmem, 1);
+
+static struct cdevsw contigmem_ops = {
+	.d_name         = "contigmem",
+	.d_version      = D_VERSION,
+	.d_flags        = D_TRACKCLOSE,
+	.d_mmap_single  = contigmem_mmap_single,
+	.d_open         = contigmem_open,
+	.d_close        = contigmem_close,
+};
+
+static int
+contigmem_load()
+{
+	char index_string[8], description[32];
+	int  i, error = 0;
+	void *addr;
+
+	if (contigmem_num_buffers > RTE_CONTIGMEM_MAX_NUM_BUFS) {
+		printf("%d buffers requested is greater than %d allowed\n",
+				contigmem_num_buffers, RTE_CONTIGMEM_MAX_NUM_BUFS);
+		error = EINVAL;
+		goto error;
+	}
+
+	if (contigmem_buffer_size < PAGE_SIZE ||
+			(contigmem_buffer_size & (contigmem_buffer_size - 1)) != 0) {
+		printf("buffer size 0x%lx is not greater than PAGE_SIZE and "
+				"power of two\n", contigmem_buffer_size);
+		error = EINVAL;
+		goto error;
+	}
+
+	for (i = 0; i < contigmem_num_buffers; i++) {
+		addr = contigmalloc(contigmem_buffer_size, M_CONTIGMEM, M_ZERO,
+			0, BUS_SPACE_MAXADDR, contigmem_buffer_size, 0);
+		if (addr == NULL) {
+			printf("contigmalloc failed for buffer %d\n", i);
+			error = ENOMEM;
+			goto error;
+		}
+
+		printf("%2u: virt=%p phys=%p\n", i, addr,
+			(void *)pmap_kextract((vm_offset_t)addr));
+
+		mtx_init(&contigmem_buffers[i].mtx, "contigmem", NULL, MTX_DEF);
+		contigmem_buffers[i].addr = addr;
+		contigmem_buffers[i].refcnt = 0;
+
+		snprintf(index_string, sizeof(index_string), "%d", i);
+		snprintf(description, sizeof(description),
+				"phys addr for buffer %d", i);
+		SYSCTL_ADD_PROC(NULL,
+				&SYSCTL_NODE_CHILDREN(_hw_contigmem, physaddr), OID_AUTO,
+				index_string, CTLTYPE_U64 | CTLFLAG_RD,
+				(void *)(uintptr_t)i, 0, contigmem_physaddr, "LU",
+				description);
+	}
+
+	contigmem_cdev = make_dev_credf(0, &contigmem_ops, 0, NULL, UID_ROOT,
+			GID_WHEEL, 0600, "contigmem");
+
+	return 0;
+
+error:
+	for (i = 0; i < contigmem_num_buffers; i++) {
+		if (contigmem_buffers[i].addr != NULL)
+			contigfree(contigmem_buffers[i].addr,
+				contigmem_buffer_size, M_CONTIGMEM);
+		if (mtx_initialized(&contigmem_buffers[i].mtx))
+			mtx_destroy(&contigmem_buffers[i].mtx);
+	}
+
+	return error;
+}
+
+static int
+contigmem_unload()
+{
+	int i;
+
+	if (contigmem_refcnt > 0)
+		return EBUSY;
+
+	if (contigmem_cdev != NULL)
+		destroy_dev(contigmem_cdev);
+
+	if (contigmem_eh_tag != NULL)
+		EVENTHANDLER_DEREGISTER(process_exit, contigmem_eh_tag);
+
+	for (i = 0; i < RTE_CONTIGMEM_MAX_NUM_BUFS; i++) {
+		if (contigmem_buffers[i].addr != NULL)
+			contigfree(contigmem_buffers[i].addr,
+				contigmem_buffer_size, M_CONTIGMEM);
+		if (mtx_initialized(&contigmem_buffers[i].mtx))
+			mtx_destroy(&contigmem_buffers[i].mtx);
+	}
+
+	return 0;
+}
+
+static int
+contigmem_physaddr(SYSCTL_HANDLER_ARGS)
+{
+	uint64_t	physaddr;
+	int		index = (int)(uintptr_t)arg1;
+
+	physaddr = (uint64_t)vtophys(contigmem_buffers[index].addr);
+	return sysctl_handle_64(oidp, &physaddr, 0, req);
+}
+
+static int
+contigmem_open(struct cdev *cdev, int fflags, int devtype,
+		struct thread *td)
+{
+
+	atomic_add_int(&contigmem_refcnt, 1);
+
+	return 0;
+}
+
+static int
+contigmem_close(struct cdev *cdev, int fflags, int devtype,
+		struct thread *td)
+{
+
+	atomic_subtract_int(&contigmem_refcnt, 1);
+
+	return 0;
+}
+
+static int
+contigmem_cdev_pager_ctor(void *handle, vm_ooffset_t size, vm_prot_t prot,
+		vm_ooffset_t foff, struct ucred *cred, u_short *color)
+{
+	struct contigmem_vm_handle *vmh = handle;
+	struct contigmem_buffer *buf;
+
+	buf = &contigmem_buffers[vmh->buffer_index];
+
+	atomic_add_int(&contigmem_refcnt, 1);
+
+	mtx_lock(&buf->mtx);
+	if (buf->refcnt == 0)
+		memset(buf->addr, 0, contigmem_buffer_size);
+	buf->refcnt++;
+	mtx_unlock(&buf->mtx);
+
+	return 0;
+}
+
+static void
+contigmem_cdev_pager_dtor(void *handle)
+{
+	struct contigmem_vm_handle *vmh = handle;
+	struct contigmem_buffer *buf;
+
+	buf = &contigmem_buffers[vmh->buffer_index];
+
+	mtx_lock(&buf->mtx);
+	buf->refcnt--;
+	mtx_unlock(&buf->mtx);
+
+	free(vmh, M_CONTIGMEM);
+
+	atomic_subtract_int(&contigmem_refcnt, 1);
+}
+
+static int
+contigmem_cdev_pager_fault(vm_object_t object, vm_ooffset_t offset, int prot,
+		vm_page_t *mres)
+{
+	vm_paddr_t paddr;
+	vm_page_t m_paddr, page;
+	vm_memattr_t memattr, memattr1;
+
+	memattr = object->memattr;
+
+	VM_OBJECT_WUNLOCK(object);
+
+	paddr = offset;
+
+	m_paddr = vm_phys_paddr_to_vm_page(paddr);
+	if (m_paddr != NULL) {
+		memattr1 = pmap_page_get_memattr(m_paddr);
+		if (memattr1 != memattr)
+			memattr = memattr1;
+	}
+
+	if (((*mres)->flags & PG_FICTITIOUS) != 0) {
+		/*
+		 * If the passed in result page is a fake page, update it with
+		 * the new physical address.
+		 */
+		page = *mres;
+		VM_OBJECT_WLOCK(object);
+		vm_page_updatefake(page, paddr, memattr);
+	} else {
+		vm_page_t mret;
+		/*
+		 * Replace the passed in reqpage page with our own fake page and
+		 * free up the original page.
+		 */
+		page = vm_page_getfake(paddr, memattr);
+		VM_OBJECT_WLOCK(object);
+		mret = vm_page_replace(page, object, (*mres)->pindex);
+		KASSERT(mret == *mres,
+		    ("invalid page replacement, old=%p, ret=%p", *mres, mret));
+		vm_page_lock(mret);
+		vm_page_free(mret);
+		vm_page_unlock(mret);
+		*mres = page;
+	}
+
+	page->valid = VM_PAGE_BITS_ALL;
+
+	return VM_PAGER_OK;
+}
+
+static struct cdev_pager_ops contigmem_cdev_pager_ops = {
+	.cdev_pg_ctor = contigmem_cdev_pager_ctor,
+	.cdev_pg_dtor = contigmem_cdev_pager_dtor,
+	.cdev_pg_fault = contigmem_cdev_pager_fault,
+};
+
+static int
+contigmem_mmap_single(struct cdev *cdev, vm_ooffset_t *offset, vm_size_t size,
+		struct vm_object **obj, int nprot)
+{
+	struct contigmem_vm_handle *vmh;
+	uint64_t buffer_index;
+
+	/*
+	 * The buffer index is encoded in the offset.  Divide the offset by
+	 *  PAGE_SIZE to get the index of the buffer requested by the user
+	 *  app.
+	 */
+	buffer_index = *offset / PAGE_SIZE;
+	if (buffer_index >= contigmem_num_buffers)
+		return EINVAL;
+
+	if (size > contigmem_buffer_size)
+		return EINVAL;
+
+	vmh = malloc(sizeof(*vmh), M_CONTIGMEM, M_NOWAIT | M_ZERO);
+	if (vmh == NULL)
+		return ENOMEM;
+	vmh->buffer_index = buffer_index;
+
+	*offset = (vm_ooffset_t)vtophys(contigmem_buffers[buffer_index].addr);
+	*obj = cdev_pager_allocate(vmh, OBJT_DEVICE, &contigmem_cdev_pager_ops,
+			size, nprot, *offset, curthread->td_ucred);
+
+	return 0;
+}
diff --git a/kernel/freebsd/contigmem/meson.build b/kernel/freebsd/contigmem/meson.build
new file mode 100644
index 0000000..8fb2ab7
--- /dev/null
+++ b/kernel/freebsd/contigmem/meson.build
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+sources = files('contigmem.c')
diff --git a/kernel/freebsd/nic_uio/BSDmakefile b/kernel/freebsd/nic_uio/BSDmakefile
new file mode 100644
index 0000000..b6f92d5
--- /dev/null
+++ b/kernel/freebsd/nic_uio/BSDmakefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+#
+
+KMOD=	nic_uio
+SRCS=	nic_uio.c device_if.h bus_if.h pci_if.h
+
+.include <bsd.kmod.mk>
diff --git a/kernel/freebsd/nic_uio/Makefile b/kernel/freebsd/nic_uio/Makefile
new file mode 100644
index 0000000..376ef3a
--- /dev/null
+++ b/kernel/freebsd/nic_uio/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# module name and path
+#
+MODULE = nic_uio
+
+#
+# CFLAGS
+#
+MODULE_CFLAGS += -I$(SRCDIR)
+MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
+MODULE_CFLAGS += -Winline -Wall -Werror
+MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y := nic_uio.c
+
+include $(RTE_SDK)/mk/rte.bsdmodule.mk
diff --git a/kernel/freebsd/nic_uio/meson.build b/kernel/freebsd/nic_uio/meson.build
new file mode 100644
index 0000000..4bdaf96
--- /dev/null
+++ b/kernel/freebsd/nic_uio/meson.build
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+sources = files('nic_uio.c')
diff --git a/kernel/freebsd/nic_uio/nic_uio.c b/kernel/freebsd/nic_uio/nic_uio.c
new file mode 100644
index 0000000..401b487
--- /dev/null
+++ b/kernel/freebsd/nic_uio/nic_uio.c
@@ -0,0 +1,350 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h> /* defines used in kernel.h */
+#include <sys/module.h>
+#include <sys/kernel.h> /* types used in module initialization */
+#include <sys/conf.h> /* cdevsw struct */
+#include <sys/bus.h> /* structs, prototypes for pci bus stuff and DEVMETHOD */
+#include <sys/rman.h>
+#include <sys/systm.h>
+#include <sys/rwlock.h>
+#include <sys/proc.h>
+
+#include <machine/bus.h>
+#include <dev/pci/pcivar.h> /* For pci_get macros! */
+#include <dev/pci/pcireg.h> /* The softc holds our per-instance data. */
+#include <vm/vm.h>
+#include <vm/uma.h>
+#include <vm/vm_object.h>
+#include <vm/vm_page.h>
+#include <vm/vm_pager.h>
+
+
+#define MAX_BARS (PCIR_MAX_BAR_0 + 1)
+
+#define MAX_DETACHED_DEVICES	128
+static device_t detached_devices[MAX_DETACHED_DEVICES] = {};
+static int num_detached = 0;
+
+struct nic_uio_softc {
+	device_t        dev_t;
+	struct cdev     *my_cdev;
+	int              bar_id[MAX_BARS];
+	struct resource *bar_res[MAX_BARS];
+	u_long           bar_start[MAX_BARS];
+	u_long           bar_size[MAX_BARS];
+};
+
+/* Function prototypes */
+static d_open_t         nic_uio_open;
+static d_close_t        nic_uio_close;
+static d_mmap_t         nic_uio_mmap;
+static d_mmap_single_t  nic_uio_mmap_single;
+static int              nic_uio_probe(device_t dev);
+static int              nic_uio_attach(device_t dev);
+static int              nic_uio_detach(device_t dev);
+static int              nic_uio_shutdown(void);
+static int              nic_uio_modevent(module_t mod, int type, void *arg);
+
+static struct cdevsw uio_cdevsw = {
+		.d_name        = "nic_uio",
+		.d_version     = D_VERSION,
+		.d_open        = nic_uio_open,
+		.d_close       = nic_uio_close,
+		.d_mmap        = nic_uio_mmap,
+		.d_mmap_single = nic_uio_mmap_single,
+};
+
+static device_method_t nic_uio_methods[] = {
+	DEVMETHOD(device_probe,    nic_uio_probe),
+	DEVMETHOD(device_attach,   nic_uio_attach),
+	DEVMETHOD(device_detach,   nic_uio_detach),
+	DEVMETHOD_END
+};
+
+struct device {
+    int vend;
+    int dev;
+};
+
+struct pci_bdf {
+	uint32_t bus;
+	uint32_t devid;
+	uint32_t function;
+};
+
+static devclass_t nic_uio_devclass;
+
+DEFINE_CLASS_0(nic_uio, nic_uio_driver, nic_uio_methods, sizeof(struct nic_uio_softc));
+DRIVER_MODULE(nic_uio, pci, nic_uio_driver, nic_uio_devclass, nic_uio_modevent, 0);
+
+static int
+nic_uio_mmap(struct cdev *cdev, vm_ooffset_t offset, vm_paddr_t *paddr,
+		int prot, vm_memattr_t *memattr)
+{
+	*paddr = offset;
+	return 0;
+}
+
+static int
+nic_uio_mmap_single(struct cdev *cdev, vm_ooffset_t *offset, vm_size_t size,
+		struct vm_object **obj, int nprot)
+{
+	/*
+	 * The BAR index is encoded in the offset.  Divide the offset by
+	 *  PAGE_SIZE to get the index of the bar requested by the user
+	 *  app.
+	 */
+	unsigned bar = *offset/PAGE_SIZE;
+	struct nic_uio_softc *sc = cdev->si_drv1;
+
+	if (bar >= MAX_BARS)
+		return EINVAL;
+
+	if (sc->bar_res[bar] == NULL) {
+		sc->bar_id[bar] = PCIR_BAR(bar);
+
+		if (PCI_BAR_IO(pci_read_config(sc->dev_t, sc->bar_id[bar], 4)))
+			sc->bar_res[bar] = bus_alloc_resource_any(sc->dev_t, SYS_RES_IOPORT,
+					&sc->bar_id[bar], RF_ACTIVE);
+		else
+			sc->bar_res[bar] = bus_alloc_resource_any(sc->dev_t, SYS_RES_MEMORY,
+					&sc->bar_id[bar], RF_ACTIVE);
+	}
+	if (sc->bar_res[bar] == NULL)
+		return ENXIO;
+
+	sc->bar_start[bar] = rman_get_start(sc->bar_res[bar]);
+	sc->bar_size[bar] = rman_get_size(sc->bar_res[bar]);
+
+	device_printf(sc->dev_t, "Bar %u @ %lx, size %lx\n", bar,
+			sc->bar_start[bar], sc->bar_size[bar]);
+
+	*offset = sc->bar_start[bar];
+	*obj = vm_pager_allocate(OBJT_DEVICE, cdev, size, nprot, *offset,
+				curthread->td_ucred);
+	return 0;
+}
+
+
+int
+nic_uio_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
+{
+	return 0;
+}
+
+int
+nic_uio_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
+{
+	return 0;
+}
+
+static int
+nic_uio_probe (device_t dev)
+{
+	int i;
+	unsigned int bus = pci_get_bus(dev);
+	unsigned int device = pci_get_slot(dev);
+	unsigned int function = pci_get_function(dev);
+
+	char bdf_str[256];
+	char *token, *remaining;
+
+	/* First check if we found this on load */
+	for (i = 0; i < num_detached; i++)
+		if (bus == pci_get_bus(detached_devices[i]) &&
+		    device == pci_get_slot(detached_devices[i]) &&
+		    function == pci_get_function(detached_devices[i])) {
+			device_set_desc(dev, "DPDK PCI Device");
+			return BUS_PROBE_SPECIFIC;
+		}
+
+	/* otherwise check if it's a new device and if it matches the BDF */
+	memset(bdf_str, 0, sizeof(bdf_str));
+	TUNABLE_STR_FETCH("hw.nic_uio.bdfs", bdf_str, sizeof(bdf_str));
+	remaining = bdf_str;
+	while (1) {
+		if (remaining == NULL || remaining[0] == '\0')
+			break;
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		bus = strtol(token, NULL, 10);
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		device = strtol(token, NULL, 10);
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		function = strtol(token, NULL, 10);
+
+		if (bus == pci_get_bus(dev) &&
+				device == pci_get_slot(dev) &&
+				function == pci_get_function(dev)) {
+
+			if (num_detached < MAX_DETACHED_DEVICES) {
+				printf("%s: probed dev=%p\n",
+					       __func__, dev);
+				detached_devices[num_detached++] = dev;
+				device_set_desc(dev, "DPDK PCI Device");
+				return BUS_PROBE_SPECIFIC;
+			} else {
+				printf("%s: reached MAX_DETACHED_DEVICES=%d. dev=%p won't be reattached\n",
+						__func__, MAX_DETACHED_DEVICES,
+						dev);
+				break;
+			}
+		}
+	}
+
+	return ENXIO;
+}
+
+static int
+nic_uio_attach(device_t dev)
+{
+	int i;
+	struct nic_uio_softc *sc;
+
+	sc = device_get_softc(dev);
+	sc->dev_t = dev;
+	sc->my_cdev = make_dev(&uio_cdevsw, device_get_unit(dev),
+			UID_ROOT, GID_WHEEL, 0600, "uio@pci:%u:%u:%u",
+			pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev));
+	if (sc->my_cdev == NULL)
+		return ENXIO;
+	sc->my_cdev->si_drv1 = sc;
+
+	for (i = 0; i < MAX_BARS; i++)
+		sc->bar_res[i] = NULL;
+
+	pci_enable_busmaster(dev);
+
+	return 0;
+}
+
+static int
+nic_uio_detach(device_t dev)
+{
+	int i;
+	struct nic_uio_softc *sc;
+	sc = device_get_softc(dev);
+
+	for (i = 0; i < MAX_BARS; i++)
+		if (sc->bar_res[i] != NULL) {
+
+			if (PCI_BAR_IO(pci_read_config(dev, sc->bar_id[i], 4)))
+				bus_release_resource(dev, SYS_RES_IOPORT, sc->bar_id[i],
+						sc->bar_res[i]);
+			else
+				bus_release_resource(dev, SYS_RES_MEMORY, sc->bar_id[i],
+						sc->bar_res[i]);
+		}
+
+	if (sc->my_cdev != NULL)
+		destroy_dev(sc->my_cdev);
+	return 0;
+}
+
+static void
+nic_uio_load(void)
+{
+	uint32_t bus, device, function;
+	device_t dev;
+	char bdf_str[256];
+	char *token, *remaining;
+
+	memset(bdf_str, 0, sizeof(bdf_str));
+	TUNABLE_STR_FETCH("hw.nic_uio.bdfs", bdf_str, sizeof(bdf_str));
+	remaining = bdf_str;
+	printf("nic_uio: hw.nic_uio.bdfs = '%s'\n", bdf_str);
+	/*
+	 * Users should specify PCI BDFs in the format "b:d:f,b:d:f,b:d:f".
+	 *  But the code below does not try differentiate between : and ,
+	 *  and just blindly uses 3 tokens at a time to construct a
+	 *  bus/device/function tuple.
+	 *
+	 * There is no checking on strtol() return values, but this should
+	 *  be OK.  Worst case is it cannot convert and returns 0.  This
+	 *  could give us a different BDF than intended, but as long as the
+	 *  PCI device/vendor ID does not match it will not matter.
+	 */
+	while (1) {
+		if (remaining == NULL || remaining[0] == '\0')
+			break;
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		bus = strtol(token, NULL, 10);
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		device = strtol(token, NULL, 10);
+		token = strsep(&remaining, ",:");
+		if (token == NULL)
+			break;
+		function = strtol(token, NULL, 10);
+
+		dev = pci_find_bsf(bus, device, function);
+		if (dev == NULL)
+			continue;
+
+		if (num_detached < MAX_DETACHED_DEVICES) {
+			printf("nic_uio_load: detaching and storing dev=%p\n",
+			       dev);
+			detached_devices[num_detached++] = dev;
+		} else {
+			printf("nic_uio_load: reached MAX_DETACHED_DEVICES=%d. dev=%p won't be reattached\n",
+			       MAX_DETACHED_DEVICES, dev);
+		}
+		device_detach(dev);
+	}
+}
+
+static void
+nic_uio_unload(void)
+{
+	int i;
+	printf("nic_uio_unload: entered...\n");
+
+	for (i = 0; i < num_detached; i++) {
+		printf("nic_uio_unload: calling to device_probe_and_attach for dev=%p...\n",
+			detached_devices[i]);
+		device_probe_and_attach(detached_devices[i]);
+		printf("nic_uio_unload: done.\n");
+	}
+
+	printf("nic_uio_unload: leaving...\n");
+}
+
+static int
+nic_uio_shutdown(void)
+{
+	return 0;
+}
+
+static int
+nic_uio_modevent(module_t mod, int type, void *arg)
+{
+
+	switch (type) {
+	case MOD_LOAD:
+		nic_uio_load();
+		break;
+	case MOD_UNLOAD:
+		nic_uio_unload();
+		break;
+	case MOD_SHUTDOWN:
+		nic_uio_shutdown();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
diff --git a/kernel/linux/Makefile b/kernel/linux/Makefile
new file mode 100644
index 0000000..c2c45a3
--- /dev/null
+++ b/kernel/linux/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2017 NXP
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+DIRS-$(CONFIG_RTE_EAL_IGB_UIO) += igb_uio
+DIRS-$(CONFIG_RTE_KNI_KMOD) += kni
+
+include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/kernel/linux/igb_uio/Kbuild b/kernel/linux/igb_uio/Kbuild
new file mode 100644
index 0000000..98c98fe
--- /dev/null
+++ b/kernel/linux/igb_uio/Kbuild
@@ -0,0 +1 @@
+obj-m := igb_uio.o
diff --git a/kernel/linux/igb_uio/Makefile b/kernel/linux/igb_uio/Makefile
new file mode 100644
index 0000000..f83bcc7
--- /dev/null
+++ b/kernel/linux/igb_uio/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# module name and path
+#
+MODULE = igb_uio
+MODULE_PATH = drivers/net/igb_uio
+
+#
+# CFLAGS
+#
+MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=100
+MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
+MODULE_CFLAGS += -Winline -Wall -Werror
+MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y := igb_uio.c
+
+include $(RTE_SDK)/mk/rte.module.mk
diff --git a/kernel/linux/igb_uio/compat.h b/kernel/linux/igb_uio/compat.h
new file mode 100644
index 0000000..ce456d4
--- /dev/null
+++ b/kernel/linux/igb_uio/compat.h
@@ -0,0 +1,134 @@
+/*
+ * Minimal wrappers to allow compiling igb_uio on older kernels.
+ */
+
+#ifndef RHEL_RELEASE_VERSION
+#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b))
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
+#define pci_cfg_access_lock   pci_block_user_cfg_access
+#define pci_cfg_access_unlock pci_unblock_user_cfg_access
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
+#define HAVE_PTE_MASK_PAGE_IOMAP
+#endif
+
+#ifndef PCI_MSIX_ENTRY_SIZE
+#define PCI_MSIX_ENTRY_SIZE            16
+#define PCI_MSIX_ENTRY_VECTOR_CTRL     12
+#define PCI_MSIX_ENTRY_CTRL_MASKBIT    1
+#endif
+
+/*
+ * for kernels < 2.6.38 and backported patch that moves MSI-X entry definition
+ * to pci_regs.h Those kernels has PCI_MSIX_ENTRY_SIZE defined but not
+ * PCI_MSIX_ENTRY_CTRL_MASKBIT
+ */
+#ifndef PCI_MSIX_ENTRY_CTRL_MASKBIT
+#define PCI_MSIX_ENTRY_CTRL_MASKBIT    1
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) && \
+	(!(defined(RHEL_RELEASE_CODE) && \
+	 RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5, 9)))
+
+static int pci_num_vf(struct pci_dev *dev)
+{
+	struct iov {
+		int pos;
+		int nres;
+		u32 cap;
+		u16 ctrl;
+		u16 total;
+		u16 initial;
+		u16 nr_virtfn;
+	} *iov = (struct iov *)dev->sriov;
+
+	if (!dev->is_physfn)
+		return 0;
+
+	return iov->nr_virtfn;
+}
+
+#endif /* < 2.6.34 */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \
+	(!(defined(RHEL_RELEASE_CODE) && \
+	   RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4)))
+
+#define kstrtoul strict_strtoul
+
+#endif /* < 2.6.39 */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0) && \
+	(!(defined(RHEL_RELEASE_CODE) && \
+	   RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 3)))
+
+/* Check if INTX works to control irq's.
+ * Set's INTX_DISABLE flag and reads it back
+ */
+static bool pci_intx_mask_supported(struct pci_dev *pdev)
+{
+	bool mask_supported = false;
+	uint16_t orig, new;
+
+	pci_block_user_cfg_access(pdev);
+	pci_read_config_word(pdev, PCI_COMMAND, &orig);
+	pci_write_config_word(pdev, PCI_COMMAND,
+			      orig ^ PCI_COMMAND_INTX_DISABLE);
+	pci_read_config_word(pdev, PCI_COMMAND, &new);
+
+	if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
+		dev_err(&pdev->dev, "Command register changed from "
+			"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
+	} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
+		mask_supported = true;
+		pci_write_config_word(pdev, PCI_COMMAND, orig);
+	}
+	pci_unblock_user_cfg_access(pdev);
+
+	return mask_supported;
+}
+
+static bool pci_check_and_mask_intx(struct pci_dev *pdev)
+{
+	bool pending;
+	uint32_t status;
+
+	pci_block_user_cfg_access(pdev);
+	pci_read_config_dword(pdev, PCI_COMMAND, &status);
+
+	/* interrupt is not ours, goes to out */
+	pending = (((status >> 16) & PCI_STATUS_INTERRUPT) != 0);
+	if (pending) {
+		uint16_t old, new;
+
+		old = status;
+		if (status != 0)
+			new = old & (~PCI_COMMAND_INTX_DISABLE);
+		else
+			new = old | PCI_COMMAND_INTX_DISABLE;
+
+		if (old != new)
+			pci_write_config_word(pdev, PCI_COMMAND, new);
+	}
+	pci_unblock_user_cfg_access(pdev);
+
+	return pending;
+}
+
+#endif /* < 3.3.0 */
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 8, 0)
+#define HAVE_ALLOC_IRQ_VECTORS 1
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+#define HAVE_MSI_LIST_IN_GENERIC_DEVICE 1
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 5, 0)
+#define HAVE_PCI_MSI_MASK_IRQ 1
+#endif
diff --git a/kernel/linux/igb_uio/igb_uio.c b/kernel/linux/igb_uio/igb_uio.c
new file mode 100644
index 0000000..4cae4dd
--- /dev/null
+++ b/kernel/linux/igb_uio/igb_uio.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0
+/*-
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/msi.h>
+#include <linux/version.h>
+#include <linux/slab.h>
+
+#include <rte_pci_dev_features.h>
+
+#include "compat.h"
+
+/**
+ * A structure describing the private information for a uio device.
+ */
+struct rte_uio_pci_dev {
+	struct uio_info info;
+	struct pci_dev *pdev;
+	enum rte_intr_mode mode;
+	struct mutex lock;
+	int refcnt;
+};
+
+static char *intr_mode;
+static enum rte_intr_mode igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
+/* sriov sysfs */
+static ssize_t
+show_max_vfs(struct device *dev, struct device_attribute *attr,
+	     char *buf)
+{
+	return snprintf(buf, 10, "%u\n", dev_num_vf(dev));
+}
+
+static ssize_t
+store_max_vfs(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	int err = 0;
+	unsigned long max_vfs;
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (0 != kstrtoul(buf, 0, &max_vfs))
+		return -EINVAL;
+
+	if (0 == max_vfs)
+		pci_disable_sriov(pdev);
+	else if (0 == pci_num_vf(pdev))
+		err = pci_enable_sriov(pdev, max_vfs);
+	else /* do nothing if change max_vfs number */
+		err = -EINVAL;
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
+
+static struct attribute *dev_attrs[] = {
+	&dev_attr_max_vfs.attr,
+	NULL,
+};
+
+static const struct attribute_group dev_attr_grp = {
+	.attrs = dev_attrs,
+};
+
+#ifndef HAVE_PCI_MSI_MASK_IRQ
+/*
+ * It masks the msix on/off of generating MSI-X messages.
+ */
+static void
+igbuio_msix_mask_irq(struct msi_desc *desc, s32 state)
+{
+	u32 mask_bits = desc->masked;
+	unsigned int offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
+						PCI_MSIX_ENTRY_VECTOR_CTRL;
+
+	if (state != 0)
+		mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
+	else
+		mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
+
+	if (mask_bits != desc->masked) {
+		writel(mask_bits, desc->mask_base + offset);
+		readl(desc->mask_base);
+		desc->masked = mask_bits;
+	}
+}
+
+/*
+ * It masks the msi on/off of generating MSI messages.
+ */
+static void
+igbuio_msi_mask_irq(struct pci_dev *pdev, struct msi_desc *desc, int32_t state)
+{
+	u32 mask_bits = desc->masked;
+	u32 offset = desc->irq - pdev->irq;
+	u32 mask = 1 << offset;
+
+	if (!desc->msi_attrib.maskbit)
+		return;
+
+	if (state != 0)
+		mask_bits &= ~mask;
+	else
+		mask_bits |= mask;
+
+	if (mask_bits != desc->masked) {
+		pci_write_config_dword(pdev, desc->mask_pos, mask_bits);
+		desc->masked = mask_bits;
+	}
+}
+
+static void
+igbuio_mask_irq(struct pci_dev *pdev, enum rte_intr_mode mode, s32 irq_state)
+{
+	struct msi_desc *desc;
+	struct list_head *msi_list;
+
+#ifdef HAVE_MSI_LIST_IN_GENERIC_DEVICE
+	msi_list = &pdev->dev.msi_list;
+#else
+	msi_list = &pdev->msi_list;
+#endif
+
+	if (mode == RTE_INTR_MODE_MSIX) {
+		list_for_each_entry(desc, msi_list, list)
+			igbuio_msix_mask_irq(desc, irq_state);
+	} else if (mode == RTE_INTR_MODE_MSI) {
+		list_for_each_entry(desc, msi_list, list)
+			igbuio_msi_mask_irq(pdev, desc, irq_state);
+	}
+}
+#endif
+
+/**
+ * This is the irqcontrol callback to be registered to uio_info.
+ * It can be used to disable/enable interrupt from user space processes.
+ *
+ * @param info
+ *  pointer to uio_info.
+ * @param irq_state
+ *  state value. 1 to enable interrupt, 0 to disable interrupt.
+ *
+ * @return
+ *  - On success, 0.
+ *  - On failure, a negative value.
+ */
+static int
+igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
+{
+	struct rte_uio_pci_dev *udev = info->priv;
+	struct pci_dev *pdev = udev->pdev;
+
+#ifdef HAVE_PCI_MSI_MASK_IRQ
+	struct irq_data *irq = irq_get_irq_data(udev->info.irq);
+#endif
+
+	pci_cfg_access_lock(pdev);
+
+	if (udev->mode == RTE_INTR_MODE_MSIX || udev->mode == RTE_INTR_MODE_MSI) {
+#ifdef HAVE_PCI_MSI_MASK_IRQ
+		if (irq_state == 1)
+			pci_msi_unmask_irq(irq);
+		else
+			pci_msi_mask_irq(irq);
+#else
+		igbuio_mask_irq(pdev, udev->mode, irq_state);
+#endif
+	}
+
+	if (udev->mode == RTE_INTR_MODE_LEGACY)
+		pci_intx(pdev, !!irq_state);
+
+	pci_cfg_access_unlock(pdev);
+
+	return 0;
+}
+
+/**
+ * This is interrupt handler which will check if the interrupt is for the right device.
+ * If yes, disable it here and will be enable later.
+ */
+static irqreturn_t
+igbuio_pci_irqhandler(int irq, void *dev_id)
+{
+	struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
+	struct uio_info *info = &udev->info;
+
+	/* Legacy mode need to mask in hardware */
+	if (udev->mode == RTE_INTR_MODE_LEGACY &&
+	    !pci_check_and_mask_intx(udev->pdev))
+		return IRQ_NONE;
+
+	uio_event_notify(info);
+
+	/* Message signal mode, no share IRQ and automasked */
+	return IRQ_HANDLED;
+}
+
+static int
+igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
+{
+	int err = 0;
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+	struct msix_entry msix_entry;
+#endif
+
+	switch (igbuio_intr_mode_preferred) {
+	case RTE_INTR_MODE_MSIX:
+		/* Only 1 msi-x vector needed */
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+		msix_entry.entry = 0;
+		if (pci_enable_msix(udev->pdev, &msix_entry, 1) == 0) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = msix_entry.vector;
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#else
+		if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSIX) == 1) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = pci_irq_vector(udev->pdev, 0);
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#endif
+
+	/* fall back to MSI */
+	case RTE_INTR_MODE_MSI:
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+		if (pci_enable_msi(udev->pdev) == 0) {
+			dev_dbg(&udev->pdev->dev, "using MSI");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = udev->pdev->irq;
+			udev->mode = RTE_INTR_MODE_MSI;
+			break;
+		}
+#else
+		if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSI) == 1) {
+			dev_dbg(&udev->pdev->dev, "using MSI");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = pci_irq_vector(udev->pdev, 0);
+			udev->mode = RTE_INTR_MODE_MSI;
+			break;
+		}
+#endif
+	/* fall back to INTX */
+	case RTE_INTR_MODE_LEGACY:
+		if (pci_intx_mask_supported(udev->pdev)) {
+			dev_dbg(&udev->pdev->dev, "using INTX");
+			udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
+			udev->info.irq = udev->pdev->irq;
+			udev->mode = RTE_INTR_MODE_LEGACY;
+			break;
+		}
+		dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n");
+	/* fall back to no IRQ */
+	case RTE_INTR_MODE_NONE:
+		udev->mode = RTE_INTR_MODE_NONE;
+		udev->info.irq = UIO_IRQ_NONE;
+		break;
+
+	default:
+		dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
+			igbuio_intr_mode_preferred);
+		udev->info.irq = UIO_IRQ_NONE;
+		err = -EINVAL;
+	}
+
+	if (udev->info.irq != UIO_IRQ_NONE)
+		err = request_irq(udev->info.irq, igbuio_pci_irqhandler,
+				  udev->info.irq_flags, udev->info.name,
+				  udev);
+	dev_info(&udev->pdev->dev, "uio device registered with irq %ld\n",
+		 udev->info.irq);
+
+	return err;
+}
+
+static void
+igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
+{
+	if (udev->info.irq) {
+		free_irq(udev->info.irq, udev);
+		udev->info.irq = 0;
+	}
+
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+	if (udev->mode == RTE_INTR_MODE_MSIX)
+		pci_disable_msix(udev->pdev);
+	if (udev->mode == RTE_INTR_MODE_MSI)
+		pci_disable_msi(udev->pdev);
+#else
+	if (udev->mode == RTE_INTR_MODE_MSIX ||
+	    udev->mode == RTE_INTR_MODE_MSI)
+		pci_free_irq_vectors(udev->pdev);
+#endif
+}
+
+
+/**
+ * This gets called while opening uio device file.
+ */
+static int
+igbuio_pci_open(struct uio_info *info, struct inode *inode)
+{
+	struct rte_uio_pci_dev *udev = info->priv;
+	struct pci_dev *dev = udev->pdev;
+	int err;
+
+	mutex_lock(&udev->lock);
+	if (++udev->refcnt > 1) {
+		mutex_unlock(&udev->lock);
+		return 0;
+	}
+
+	/* set bus master, which was cleared by the reset function */
+	pci_set_master(dev);
+
+	/* enable interrupts */
+	err = igbuio_pci_enable_interrupts(udev);
+	mutex_unlock(&udev->lock);
+	if (err) {
+		dev_err(&dev->dev, "Enable interrupt fails\n");
+		return err;
+	}
+	return 0;
+}
+
+static int
+igbuio_pci_release(struct uio_info *info, struct inode *inode)
+{
+	struct rte_uio_pci_dev *udev = info->priv;
+	struct pci_dev *dev = udev->pdev;
+
+	mutex_lock(&udev->lock);
+	if (--udev->refcnt > 0) {
+		mutex_unlock(&udev->lock);
+		return 0;
+	}
+
+	/* disable interrupts */
+	igbuio_pci_disable_interrupts(udev);
+
+	/* stop the device from further DMA */
+	pci_clear_master(dev);
+
+	mutex_unlock(&udev->lock);
+	return 0;
+}
+
+/* Remap pci resources described by bar #pci_bar in uio resource n. */
+static int
+igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
+		       int n, int pci_bar, const char *name)
+{
+	unsigned long addr, len;
+	void *internal_addr;
+
+	if (n >= ARRAY_SIZE(info->mem))
+		return -EINVAL;
+
+	addr = pci_resource_start(dev, pci_bar);
+	len = pci_resource_len(dev, pci_bar);
+	if (addr == 0 || len == 0)
+		return -1;
+	internal_addr = ioremap(addr, len);
+	if (internal_addr == NULL)
+		return -1;
+	info->mem[n].name = name;
+	info->mem[n].addr = addr;
+	info->mem[n].internal_addr = internal_addr;
+	info->mem[n].size = len;
+	info->mem[n].memtype = UIO_MEM_PHYS;
+	return 0;
+}
+
+/* Get pci port io resources described by bar #pci_bar in uio resource n. */
+static int
+igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
+		int n, int pci_bar, const char *name)
+{
+	unsigned long addr, len;
+
+	if (n >= ARRAY_SIZE(info->port))
+		return -EINVAL;
+
+	addr = pci_resource_start(dev, pci_bar);
+	len = pci_resource_len(dev, pci_bar);
+	if (addr == 0 || len == 0)
+		return -EINVAL;
+
+	info->port[n].name = name;
+	info->port[n].start = addr;
+	info->port[n].size = len;
+	info->port[n].porttype = UIO_PORT_X86;
+
+	return 0;
+}
+
+/* Unmap previously ioremap'd resources */
+static void
+igbuio_pci_release_iomem(struct uio_info *info)
+{
+	int i;
+
+	for (i = 0; i < MAX_UIO_MAPS; i++) {
+		if (info->mem[i].internal_addr)
+			iounmap(info->mem[i].internal_addr);
+	}
+}
+
+static int
+igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
+{
+	int i, iom, iop, ret;
+	unsigned long flags;
+	static const char *bar_names[PCI_STD_RESOURCE_END + 1]  = {
+		"BAR0",
+		"BAR1",
+		"BAR2",
+		"BAR3",
+		"BAR4",
+		"BAR5",
+	};
+
+	iom = 0;
+	iop = 0;
+
+	for (i = 0; i < ARRAY_SIZE(bar_names); i++) {
+		if (pci_resource_len(dev, i) != 0 &&
+				pci_resource_start(dev, i) != 0) {
+			flags = pci_resource_flags(dev, i);
+			if (flags & IORESOURCE_MEM) {
+				ret = igbuio_pci_setup_iomem(dev, info, iom,
+							     i, bar_names[i]);
+				if (ret != 0)
+					return ret;
+				iom++;
+			} else if (flags & IORESOURCE_IO) {
+				ret = igbuio_pci_setup_ioport(dev, info, iop,
+							      i, bar_names[i]);
+				if (ret != 0)
+					return ret;
+				iop++;
+			}
+		}
+	}
+
+	return (iom != 0 || iop != 0) ? ret : -ENOENT;
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
+static int __devinit
+#else
+static int
+#endif
+igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct rte_uio_pci_dev *udev;
+	dma_addr_t map_dma_addr;
+	void *map_addr;
+	int err;
+
+	udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
+	if (!udev)
+		return -ENOMEM;
+
+	mutex_init(&udev->lock);
+	/*
+	 * enable device: ask low-level code to enable I/O and
+	 * memory
+	 */
+	err = pci_enable_device(dev);
+	if (err != 0) {
+		dev_err(&dev->dev, "Cannot enable PCI device\n");
+		goto fail_free;
+	}
+
+	/* enable bus mastering on the device */
+	pci_set_master(dev);
+
+	/* remap IO memory */
+	err = igbuio_setup_bars(dev, &udev->info);
+	if (err != 0)
+		goto fail_release_iomem;
+
+	/* set 64-bit DMA mask */
+	err = pci_set_dma_mask(dev,  DMA_BIT_MASK(64));
+	if (err != 0) {
+		dev_err(&dev->dev, "Cannot set DMA mask\n");
+		goto fail_release_iomem;
+	}
+
+	err = pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64));
+	if (err != 0) {
+		dev_err(&dev->dev, "Cannot set consistent DMA mask\n");
+		goto fail_release_iomem;
+	}
+
+	/* fill uio infos */
+	udev->info.name = "igb_uio";
+	udev->info.version = "0.1";
+	udev->info.irqcontrol = igbuio_pci_irqcontrol;
+	udev->info.open = igbuio_pci_open;
+	udev->info.release = igbuio_pci_release;
+	udev->info.priv = udev;
+	udev->pdev = dev;
+
+	err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
+	if (err != 0)
+		goto fail_release_iomem;
+
+	/* register uio driver */
+	err = uio_register_device(&dev->dev, &udev->info);
+	if (err != 0)
+		goto fail_remove_group;
+
+	pci_set_drvdata(dev, udev);
+
+	/*
+	 * Doing a harmless dma mapping for attaching the device to
+	 * the iommu identity mapping if kernel boots with iommu=pt.
+	 * Note this is not a problem if no IOMMU at all.
+	 */
+	map_addr = dma_alloc_coherent(&dev->dev, 1024, &map_dma_addr,
+			GFP_KERNEL);
+	if (map_addr)
+		memset(map_addr, 0, 1024);
+
+	if (!map_addr)
+		dev_info(&dev->dev, "dma mapping failed\n");
+	else {
+		dev_info(&dev->dev, "mapping 1K dma=%#llx host=%p\n",
+			 (unsigned long long)map_dma_addr, map_addr);
+
+		dma_free_coherent(&dev->dev, 1024, map_addr, map_dma_addr);
+		dev_info(&dev->dev, "unmapping 1K dma=%#llx host=%p\n",
+			 (unsigned long long)map_dma_addr, map_addr);
+	}
+
+	return 0;
+
+fail_remove_group:
+	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
+fail_release_iomem:
+	igbuio_pci_release_iomem(&udev->info);
+	pci_disable_device(dev);
+fail_free:
+	kfree(udev);
+
+	return err;
+}
+
+static void
+igbuio_pci_remove(struct pci_dev *dev)
+{
+	struct rte_uio_pci_dev *udev = pci_get_drvdata(dev);
+
+	mutex_destroy(&udev->lock);
+	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
+	uio_unregister_device(&udev->info);
+	igbuio_pci_release_iomem(&udev->info);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	kfree(udev);
+}
+
+static int
+igbuio_config_intr_mode(char *intr_str)
+{
+	if (!intr_str) {
+		pr_info("Use MSIX interrupt by default\n");
+		return 0;
+	}
+
+	if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) {
+		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
+		pr_info("Use MSIX interrupt\n");
+	} else if (!strcmp(intr_str, RTE_INTR_MODE_MSI_NAME)) {
+		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSI;
+		pr_info("Use MSI interrupt\n");
+	} else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) {
+		igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY;
+		pr_info("Use legacy interrupt\n");
+	} else {
+		pr_info("Error: bad parameter - %s\n", intr_str);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct pci_driver igbuio_pci_driver = {
+	.name = "igb_uio",
+	.id_table = NULL,
+	.probe = igbuio_pci_probe,
+	.remove = igbuio_pci_remove,
+};
+
+static int __init
+igbuio_pci_init_module(void)
+{
+	int ret;
+
+	ret = igbuio_config_intr_mode(intr_mode);
+	if (ret < 0)
+		return ret;
+
+	return pci_register_driver(&igbuio_pci_driver);
+}
+
+static void __exit
+igbuio_pci_exit_module(void)
+{
+	pci_unregister_driver(&igbuio_pci_driver);
+}
+
+module_init(igbuio_pci_init_module);
+module_exit(igbuio_pci_exit_module);
+
+module_param(intr_mode, charp, S_IRUGO);
+MODULE_PARM_DESC(intr_mode,
+"igb_uio interrupt mode (default=msix):\n"
+"    " RTE_INTR_MODE_MSIX_NAME "       Use MSIX interrupt\n"
+"    " RTE_INTR_MODE_MSI_NAME "        Use MSI interrupt\n"
+"    " RTE_INTR_MODE_LEGACY_NAME "     Use Legacy interrupt\n"
+"\n");
+
+MODULE_DESCRIPTION("UIO driver for Intel IGB PCI cards");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Intel Corporation");
diff --git a/kernel/linux/igb_uio/meson.build b/kernel/linux/igb_uio/meson.build
new file mode 100644
index 0000000..356f4ab
--- /dev/null
+++ b/kernel/linux/igb_uio/meson.build
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+kernel_dir = get_option('kernel_dir')
+if kernel_dir == ''
+	kernel_version = run_command('uname', '-r').stdout().strip()
+	kernel_dir = '/lib/modules/' + kernel_version + '/build'
+endif
+
+mkfile = custom_target('igb_uio_makefile',
+	output: 'Makefile',
+	command: ['touch', '@OUTPUT@'])
+
+custom_target('igb_uio',
+	input: ['igb_uio.c', 'Kbuild'],
+	output: 'igb_uio.ko',
+	command: ['make', '-C', kernel_dir,
+		'M=' + meson.current_build_dir(),
+		'src=' + meson.current_source_dir(),
+		'EXTRA_CFLAGS=-I' + meson.current_source_dir() +
+			'/../../../lib/librte_eal/common/include',
+		'modules'],
+	depends: mkfile,
+	build_by_default: get_option('enable_kmods'))
diff --git a/kernel/linux/kni/Makefile b/kernel/linux/kni/Makefile
new file mode 100644
index 0000000..282be7b
--- /dev/null
+++ b/kernel/linux/kni/Makefile
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# module name and path
+#
+MODULE = rte_kni
+
+#
+# CFLAGS
+#
+MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=50
+MODULE_CFLAGS += -I$(RTE_OUTPUT)/include -I$(SRCDIR)/ethtool/ixgbe -I$(SRCDIR)/ethtool/igb
+MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
+MODULE_CFLAGS += -Wall -Werror
+
+-include /etc/lsb-release
+
+ifeq ($(DISTRIB_ID),Ubuntu)
+MODULE_CFLAGS += -DUBUNTU_RELEASE_CODE=$(subst .,,$(DISTRIB_RELEASE))
+UBUNTU_KERNEL_CODE := $(shell echo `grep UTS_RELEASE $(RTE_KERNELDIR)/include/generated/utsrelease.h \
+	 | cut -d '"' -f2 | cut -d- -f1,2 | tr .- ,`,1)
+MODULE_CFLAGS += -D"UBUNTU_KERNEL_CODE=UBUNTU_KERNEL_VERSION($(UBUNTU_KERNEL_CODE))"
+endif
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y := kni_misc.c
+SRCS-y += kni_net.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += kni_ethtool.c
+
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_main.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_api.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_common.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_ethtool.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82599.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82598.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_x540.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_phy.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/kcompat.c
+
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_82575.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_i210.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_api.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mac.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_manage.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mbx.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_nvm.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_phy.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_ethtool.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_main.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_param.c
+SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_vmdq.c
+
+include $(RTE_SDK)/mk/rte.module.mk
diff --git a/kernel/linux/kni/compat.h b/kernel/linux/kni/compat.h
new file mode 100644
index 0000000..3f8c0bc
--- /dev/null
+++ b/kernel/linux/kni/compat.h
@@ -0,0 +1,106 @@
+/*
+ * Minimal wrappers to allow compiling kni on older kernels.
+ */
+
+#include <linux/version.h>
+
+#ifndef RHEL_RELEASE_VERSION
+#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b))
+#endif
+
+/* SuSE version macro is the same as Linux kernel version */
+#ifndef SLE_VERSION
+#define SLE_VERSION(a, b, c) KERNEL_VERSION(a, b, c)
+#endif
+#ifdef CONFIG_SUSE_KERNEL
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57))
+/* SLES12SP3 is at least 4.4.57+ based */
+#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0)
+#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 12, 28))
+/* SLES12 is at least 3.12.28+ based */
+#define SLE_VERSION_CODE SLE_VERSION(12, 0, 0)
+#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3, 0, 61)) && \
+	(LINUX_VERSION_CODE < KERNEL_VERSION(3, 1, 0)))
+/* SLES11 SP3 is at least 3.0.61+ based */
+#define SLE_VERSION_CODE SLE_VERSION(11, 3, 0)
+#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 32))
+/* SLES11 SP1 is 2.6.32 based */
+#define SLE_VERSION_CODE SLE_VERSION(11, 1, 0)
+#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 27))
+/* SLES11 GA is 2.6.27 based */
+#define SLE_VERSION_CODE SLE_VERSION(11, 0, 0)
+#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */
+#endif /* CONFIG_SUSE_KERNEL */
+#ifndef SLE_VERSION_CODE
+#define SLE_VERSION_CODE 0
+#endif /* SLE_VERSION_CODE */
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \
+	(!(defined(RHEL_RELEASE_CODE) && \
+	   RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4)))
+
+#define kstrtoul strict_strtoul
+
+#endif /* < 2.6.39 */
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 33)
+#define HAVE_SIMPLIFIED_PERNET_OPERATIONS
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35)
+#define sk_sleep(s) ((s)->sk_sleep)
+#else
+#define HAVE_SOCKET_WQ
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 7, 0)
+#define HAVE_STATIC_SOCK_MAP_FD
+#else
+#define kni_sock_map_fd(s) sock_map_fd(s, 0)
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0)
+#define HAVE_CHANGE_CARRIER_CB
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0)
+#define ether_addr_copy(dst, src) memcpy(dst, src, ETH_ALEN)
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0)
+#define HAVE_IOV_ITER_MSGHDR
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)
+#define HAVE_KIOCB_MSG_PARAM
+#define HAVE_REBUILD_HEADER
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+#define HAVE_SK_ALLOC_KERN_PARAM
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0) || \
+	(defined(RHEL_RELEASE_CODE) && \
+	 RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) || \
+	(SLE_VERSION_CODE && SLE_VERSION_CODE == SLE_VERSION(12, 3, 0))
+#define HAVE_TRANS_START_HELPER
+#endif
+
+/*
+ * KNI uses NET_NAME_UNKNOWN macro to select correct version of alloc_netdev()
+ * For old kernels just backported the commit that enables the macro
+ * (685343fc3ba6) but still uses old API, it is required to undefine macro to
+ * select correct version of API, this is safe since KNI doesn't use the value.
+ * This fix is specific to RedHat/CentOS kernels.
+ */
+#if (defined(RHEL_RELEASE_CODE) && \
+	(RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8)) && \
+	(LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)))
+#undef NET_NAME_UNKNOWN
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
+#define HAVE_SIGNAL_FUNCTIONS_OWN_HEADER
+#endif
diff --git a/kernel/linux/kni/ethtool/README b/kernel/linux/kni/ethtool/README
new file mode 100644
index 0000000..af36738
--- /dev/null
+++ b/kernel/linux/kni/ethtool/README
@@ -0,0 +1,71 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2010-2014 Intel Corporation.
+
+Description
+
+In order to support ethtool in Kernel NIC Interface, the standard Linux kernel
+drivers of ixgbe/igb are needed to be reused here. ixgbe-3.9.17 is the version
+modified from in kernel NIC interface kernel module to support ixgbe NIC, and
+igb-3.4.8 is the version modified from in kernel NIC interface kernel module to
+support igb NIC.
+
+The source code package of ixgbe can be downloaded from sourceforge.net as below.
+http://sourceforge.net/projects/e1000/files/ixgbe%20stable/
+Below source files are copied or modified from ixgbe.
+
+ixgbe_82598.h
+ixgbe_82599.c
+ixgbe_82599.h
+ixgbe_api.c
+ixgbe_api.h
+ixgbe_common.c
+ixgbe_common.h
+ixgbe_dcb.h
+ixgbe_ethtool.c
+ixgbe_fcoe.h
+ixgbe.h
+ixgbe_main.c
+ixgbe_mbx.h
+ixgbe_osdep.h
+ixgbe_phy.c
+ixgbe_phy.h
+ixgbe_sriov.h
+ixgbe_type.h
+kcompat.c
+kcompat.h
+
+The source code package of igb can be downloaded from sourceforge.net as below.
+http://sourceforge.net/projects/e1000/files/igb%20stable/
+Below source files are copied or modified from igb.
+
+e1000_82575.c
+e1000_82575.h
+e1000_api.c
+e1000_api.h
+e1000_defines.h
+e1000_hw.h
+e1000_mac.c
+e1000_mac.h
+e1000_manage.c
+e1000_manage.h
+e1000_mbx.c
+e1000_mbx.h
+e1000_nvm.c
+e1000_nvm.h
+e1000_osdep.h
+e1000_phy.c
+e1000_phy.h
+e1000_regs.h
+igb_ethtool.c
+igb.h
+igb_main.c
+igb_param.c
+igb_procfs.c
+igb_regtest.h
+igb_sysfs.c
+igb_vmdq.c
+igb_vmdq.h
+kcompat.c
+kcompat_ethtool.c
+kcompat.h
+
diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.c b/kernel/linux/kni/ethtool/igb/e1000_82575.c
new file mode 100644
index 0000000..9834670
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_82575.c
@@ -0,0 +1,3650 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * 82575EB Gigabit Network Connection
+ * 82575EB Gigabit Backplane Connection
+ * 82575GB Gigabit Network Connection
+ * 82576 Gigabit Network Connection
+ * 82576 Quad Port Gigabit Mezzanine Adapter
+ * 82580 Gigabit Network Connection
+ * I350 Gigabit Network Connection
+ */
+
+#include "e1000_api.h"
+#include "e1000_i210.h"
+
+static s32  e1000_init_phy_params_82575(struct e1000_hw *hw);
+static s32  e1000_init_mac_params_82575(struct e1000_hw *hw);
+static s32  e1000_acquire_phy_82575(struct e1000_hw *hw);
+static void e1000_release_phy_82575(struct e1000_hw *hw);
+static s32  e1000_acquire_nvm_82575(struct e1000_hw *hw);
+static void e1000_release_nvm_82575(struct e1000_hw *hw);
+static s32  e1000_check_for_link_82575(struct e1000_hw *hw);
+static s32  e1000_check_for_link_media_swap(struct e1000_hw *hw);
+static s32  e1000_get_cfg_done_82575(struct e1000_hw *hw);
+static s32  e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
+					 u16 *duplex);
+static s32  e1000_init_hw_82575(struct e1000_hw *hw);
+static s32  e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw);
+static s32  e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+					   u16 *data);
+static s32  e1000_reset_hw_82575(struct e1000_hw *hw);
+static s32  e1000_reset_hw_82580(struct e1000_hw *hw);
+static s32  e1000_read_phy_reg_82580(struct e1000_hw *hw,
+				     u32 offset, u16 *data);
+static s32  e1000_write_phy_reg_82580(struct e1000_hw *hw,
+				      u32 offset, u16 data);
+static s32  e1000_set_d0_lplu_state_82580(struct e1000_hw *hw,
+					  bool active);
+static s32  e1000_set_d3_lplu_state_82580(struct e1000_hw *hw,
+					  bool active);
+static s32  e1000_set_d0_lplu_state_82575(struct e1000_hw *hw,
+					  bool active);
+static s32  e1000_setup_copper_link_82575(struct e1000_hw *hw);
+static s32  e1000_setup_serdes_link_82575(struct e1000_hw *hw);
+static s32  e1000_get_media_type_82575(struct e1000_hw *hw);
+static s32  e1000_set_sfp_media_type_82575(struct e1000_hw *hw);
+static s32  e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data);
+static s32  e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw,
+					    u32 offset, u16 data);
+static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw);
+static s32  e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
+static s32  e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
+						 u16 *speed, u16 *duplex);
+static s32  e1000_get_phy_id_82575(struct e1000_hw *hw);
+static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
+static bool e1000_sgmii_active_82575(struct e1000_hw *hw);
+static s32  e1000_reset_init_script_82575(struct e1000_hw *hw);
+static s32  e1000_read_mac_addr_82575(struct e1000_hw *hw);
+static void e1000_config_collision_dist_82575(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw);
+static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw);
+static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw);
+static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw);
+static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw);
+static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw,
+						 u16 offset);
+static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+						   u16 offset);
+static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw);
+static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw);
+static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value);
+static void e1000_clear_vfta_i350(struct e1000_hw *hw);
+
+static void e1000_i2c_start(struct e1000_hw *hw);
+static void e1000_i2c_stop(struct e1000_hw *hw);
+static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data);
+static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data);
+static s32 e1000_get_i2c_ack(struct e1000_hw *hw);
+static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data);
+static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data);
+static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl);
+static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl);
+static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data);
+static bool e1000_get_i2c_data(u32 *i2cctl);
+
+static const u16 e1000_82580_rxpbs_table[] = {
+	36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
+#define E1000_82580_RXPBS_TABLE_SIZE \
+	(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+
+
+/**
+ *  e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
+ *  @hw: pointer to the HW structure
+ *
+ *  Called to determine if the I2C pins are being used for I2C or as an
+ *  external MDIO interface since the two options are mutually exclusive.
+ **/
+static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw)
+{
+	u32 reg = 0;
+	bool ext_mdio = false;
+
+	DEBUGFUNC("e1000_sgmii_uses_mdio_82575");
+
+	switch (hw->mac.type) {
+	case e1000_82575:
+	case e1000_82576:
+		reg = E1000_READ_REG(hw, E1000_MDIC);
+		ext_mdio = !!(reg & E1000_MDIC_DEST);
+		break;
+	case e1000_82580:
+	case e1000_i350:
+	case e1000_i354:
+	case e1000_i210:
+	case e1000_i211:
+		reg = E1000_READ_REG(hw, E1000_MDICNFG);
+		ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
+		break;
+	default:
+		break;
+	}
+	return ext_mdio;
+}
+
+/**
+ *  e1000_init_phy_params_82575 - Init PHY func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u32 ctrl_ext;
+
+	DEBUGFUNC("e1000_init_phy_params_82575");
+
+	phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic;
+	phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic;
+
+	if (hw->phy.media_type != e1000_media_type_copper) {
+		phy->type = e1000_phy_none;
+		goto out;
+	}
+
+	phy->ops.power_up   = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_82575;
+
+	phy->autoneg_mask	= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us	= 100;
+
+	phy->ops.acquire	= e1000_acquire_phy_82575;
+	phy->ops.check_reset_block = e1000_check_reset_block_generic;
+	phy->ops.commit		= e1000_phy_sw_reset_generic;
+	phy->ops.get_cfg_done	= e1000_get_cfg_done_82575;
+	phy->ops.release	= e1000_release_phy_82575;
+
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+
+	if (e1000_sgmii_active_82575(hw)) {
+		phy->ops.reset = e1000_phy_hw_reset_sgmii_82575;
+		ctrl_ext |= E1000_CTRL_I2C_ENA;
+	} else {
+		phy->ops.reset = e1000_phy_hw_reset_generic;
+		ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+	}
+
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+	e1000_reset_mdicnfg_82580(hw);
+
+	if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) {
+		phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575;
+		phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575;
+	} else {
+		switch (hw->mac.type) {
+		case e1000_82580:
+		case e1000_i350:
+		case e1000_i354:
+			phy->ops.read_reg = e1000_read_phy_reg_82580;
+			phy->ops.write_reg = e1000_write_phy_reg_82580;
+			break;
+		case e1000_i210:
+		case e1000_i211:
+			phy->ops.read_reg = e1000_read_phy_reg_gs40g;
+			phy->ops.write_reg = e1000_write_phy_reg_gs40g;
+			break;
+		default:
+			phy->ops.read_reg = e1000_read_phy_reg_igp;
+			phy->ops.write_reg = e1000_write_phy_reg_igp;
+		}
+	}
+
+	/* Set phy->phy_addr and phy->id. */
+	ret_val = e1000_get_phy_id_82575(hw);
+
+	/* Verify phy id and set remaining function pointers */
+	switch (phy->id) {
+	case M88E1543_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
+	case M88E1112_E_PHY_ID:
+	case M88E1340M_E_PHY_ID:
+	case M88E1111_I_PHY_ID:
+		phy->type		= e1000_phy_m88;
+		phy->ops.check_polarity	= e1000_check_polarity_m88;
+		phy->ops.get_info	= e1000_get_phy_info_m88;
+		if (phy->id == I347AT4_E_PHY_ID ||
+		    phy->id == M88E1112_E_PHY_ID ||
+		    phy->id == M88E1340M_E_PHY_ID)
+			phy->ops.get_cable_length =
+					 e1000_get_cable_length_m88_gen2;
+		else if (phy->id == M88E1543_E_PHY_ID)
+			phy->ops.get_cable_length =
+					 e1000_get_cable_length_m88_gen2;
+		else
+			phy->ops.get_cable_length = e1000_get_cable_length_m88;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
+		/* Check if this PHY is configured for media swap. */
+		if (phy->id == M88E1112_E_PHY_ID) {
+			u16 data;
+
+			ret_val = phy->ops.write_reg(hw,
+						     E1000_M88E1112_PAGE_ADDR,
+						     2);
+			if (ret_val)
+				goto out;
+
+			ret_val = phy->ops.read_reg(hw,
+						    E1000_M88E1112_MAC_CTRL_1,
+						    &data);
+			if (ret_val)
+				goto out;
+
+			data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >>
+			       E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT;
+			if (data == E1000_M88E1112_AUTO_COPPER_SGMII ||
+			    data == E1000_M88E1112_AUTO_COPPER_BASEX)
+				hw->mac.ops.check_for_link =
+						e1000_check_for_link_media_swap;
+		}
+		break;
+	case IGP03E1000_E_PHY_ID:
+	case IGP04E1000_E_PHY_ID:
+		phy->type = e1000_phy_igp_3;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.get_info = e1000_get_phy_info_igp;
+		phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp;
+		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575;
+		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic;
+		break;
+	case I82580_I_PHY_ID:
+	case I350_I_PHY_ID:
+		phy->type = e1000_phy_82580;
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+					 e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580;
+		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580;
+		break;
+	case I210_I_PHY_ID:
+		phy->type		= e1000_phy_i210;
+		phy->ops.check_polarity	= e1000_check_polarity_m88;
+		phy->ops.get_info	= e1000_get_phy_info_m88;
+		phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2;
+		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580;
+		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params_82575 - Init NVM func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_init_nvm_params_82575(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u16 size;
+
+	DEBUGFUNC("e1000_init_nvm_params_82575");
+
+	size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+		     E1000_EECD_SIZE_EX_SHIFT);
+	/*
+	 * Added to a constant, "size" becomes the left-shift value
+	 * for setting word_size.
+	 */
+	size += NVM_WORD_SIZE_BASE_SHIFT;
+
+	/* Just in case size is out of range, cap it to the largest
+	 * EEPROM size supported
+	 */
+	if (size > 15)
+		size = 15;
+
+	nvm->word_size = 1 << size;
+	if (hw->mac.type < e1000_i210) {
+		nvm->opcode_bits = 8;
+		nvm->delay_usec = 1;
+
+		switch (nvm->override) {
+		case e1000_nvm_override_spi_large:
+			nvm->page_size = 32;
+			nvm->address_bits = 16;
+			break;
+		case e1000_nvm_override_spi_small:
+			nvm->page_size = 8;
+			nvm->address_bits = 8;
+			break;
+		default:
+			nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+			nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ?
+					    16 : 8;
+			break;
+		}
+		if (nvm->word_size == (1 << 15))
+			nvm->page_size = 128;
+
+		nvm->type = e1000_nvm_eeprom_spi;
+	} else {
+		nvm->type = e1000_nvm_flash_hw;
+	}
+
+	/* Function Pointers */
+	nvm->ops.acquire = e1000_acquire_nvm_82575;
+	nvm->ops.release = e1000_release_nvm_82575;
+	if (nvm->word_size < (1 << 15))
+		nvm->ops.read = e1000_read_nvm_eerd;
+	else
+		nvm->ops.read = e1000_read_nvm_spi;
+
+	nvm->ops.write = e1000_write_nvm_spi;
+	nvm->ops.validate = e1000_validate_nvm_checksum_generic;
+	nvm->ops.update = e1000_update_nvm_checksum_generic;
+	nvm->ops.valid_led_default = e1000_valid_led_default_82575;
+
+	/* override generic family function pointers for specific descendants */
+	switch (hw->mac.type) {
+	case e1000_82580:
+		nvm->ops.validate = e1000_validate_nvm_checksum_82580;
+		nvm->ops.update = e1000_update_nvm_checksum_82580;
+		break;
+	case e1000_i350:
+	//case e1000_i354:
+		nvm->ops.validate = e1000_validate_nvm_checksum_i350;
+		nvm->ops.update = e1000_update_nvm_checksum_i350;
+		break;
+	default:
+		break;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_init_mac_params_82575 - Init MAC func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_82575(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+
+	DEBUGFUNC("e1000_init_mac_params_82575");
+
+	/* Derives media type */
+	e1000_get_media_type_82575(hw);
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set uta register count */
+	mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+	if (mac->type == e1000_82576)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+	if (mac->type == e1000_82580)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+	if (mac->type == e1000_i350 || mac->type == e1000_i354)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+
+	/* Enable EEE default settings for EEE supported devices */
+	if (mac->type >= e1000_i350)
+		dev_spec->eee_disable = false;
+
+	/* Allow a single clear of the SW semaphore on I210 and newer */
+	if (mac->type >= e1000_i210)
+		dev_spec->clear_semaphore_once = true;
+
+	/* Set if part includes ASF firmware */
+	mac->asf_firmware_present = true;
+	/* FWSM register */
+	mac->has_fwsm = true;
+	/* ARC supported; valid only if manageability features are enabled. */
+	mac->arc_subsystem_valid =
+		!!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK);
+
+	/* Function pointers */
+
+	/* bus type/speed/width */
+	mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;
+	/* reset */
+	if (mac->type >= e1000_82580)
+		mac->ops.reset_hw = e1000_reset_hw_82580;
+	else
+	mac->ops.reset_hw = e1000_reset_hw_82575;
+	/* hw initialization */
+	mac->ops.init_hw = e1000_init_hw_82575;
+	/* link setup */
+	mac->ops.setup_link = e1000_setup_link_generic;
+	/* physical interface link setup */
+	mac->ops.setup_physical_interface =
+		(hw->phy.media_type == e1000_media_type_copper)
+		? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575;
+	/* physical interface shutdown */
+	mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575;
+	/* physical interface power up */
+	mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575;
+	/* check for link */
+	mac->ops.check_for_link = e1000_check_for_link_82575;
+	/* read mac address */
+	mac->ops.read_mac_addr = e1000_read_mac_addr_82575;
+	/* configure collision distance */
+	mac->ops.config_collision_dist = e1000_config_collision_dist_82575;
+	/* multicast address update */
+	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
+	if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) {
+		/* writing VFTA */
+		mac->ops.write_vfta = e1000_write_vfta_i350;
+		/* clearing VFTA */
+		mac->ops.clear_vfta = e1000_clear_vfta_i350;
+	} else {
+		/* writing VFTA */
+		mac->ops.write_vfta = e1000_write_vfta_generic;
+		/* clearing VFTA */
+		mac->ops.clear_vfta = e1000_clear_vfta_generic;
+	}
+	if (hw->mac.type >= e1000_82580)
+		mac->ops.validate_mdi_setting =
+				e1000_validate_mdi_setting_crossover_generic;
+	/* ID LED init */
+	mac->ops.id_led_init = e1000_id_led_init_generic;
+	/* blink LED */
+	mac->ops.blink_led = e1000_blink_led_generic;
+	/* setup LED */
+	mac->ops.setup_led = e1000_setup_led_generic;
+	/* cleanup LED */
+	mac->ops.cleanup_led = e1000_cleanup_led_generic;
+	/* turn on/off LED */
+	mac->ops.led_on = e1000_led_on_generic;
+	mac->ops.led_off = e1000_led_off_generic;
+	/* clear hardware counters */
+	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575;
+	/* link info */
+	mac->ops.get_link_up_info = e1000_get_link_up_info_82575;
+	/* get thermal sensor data */
+	mac->ops.get_thermal_sensor_data =
+				e1000_get_thermal_sensor_data_generic;
+	mac->ops.init_thermal_sensor_thresh =
+				e1000_init_thermal_sensor_thresh_generic;
+	/* acquire SW_FW sync */
+	mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575;
+	mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575;
+	if (mac->type >= e1000_i210) {
+		mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210;
+		mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210;
+	}
+
+	/* set lan id for port to determine which phy lock to use */
+	hw->mac.ops.set_lan_id(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_init_function_pointers_82575 - Init func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_82575(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_init_function_pointers_82575");
+
+	hw->mac.ops.init_params = e1000_init_mac_params_82575;
+	hw->nvm.ops.init_params = e1000_init_nvm_params_82575;
+	hw->phy.ops.init_params = e1000_init_phy_params_82575;
+	hw->mbx.ops.init_params = e1000_init_mbx_params_pf;
+}
+
+/**
+ *  e1000_acquire_phy_82575 - Acquire rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire access rights to the correct PHY.
+ **/
+static s32 e1000_acquire_phy_82575(struct e1000_hw *hw)
+{
+	u16 mask = E1000_SWFW_PHY0_SM;
+
+	DEBUGFUNC("e1000_acquire_phy_82575");
+
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_SWFW_PHY2_SM;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_SWFW_PHY3_SM;
+
+	return hw->mac.ops.acquire_swfw_sync(hw, mask);
+}
+
+/**
+ *  e1000_release_phy_82575 - Release rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  A wrapper to release access rights to the correct PHY.
+ **/
+static void e1000_release_phy_82575(struct e1000_hw *hw)
+{
+	u16 mask = E1000_SWFW_PHY0_SM;
+
+	DEBUGFUNC("e1000_release_phy_82575");
+
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_SWFW_PHY2_SM;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_SWFW_PHY3_SM;
+
+	hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+/**
+ *  e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the serial gigabit media independent
+ *  interface and stores the retrieved information in data.
+ **/
+static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+					  u16 *data)
+{
+	s32 ret_val = -E1000_ERR_PARAM;
+
+	DEBUGFUNC("e1000_read_phy_reg_sgmii_82575");
+
+	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+		DEBUGOUT1("PHY Address %u is out of range\n", offset);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_read_phy_reg_i2c(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the serial gigabit
+ *  media independent interface.
+ **/
+static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+					   u16 data)
+{
+	s32 ret_val = -E1000_ERR_PARAM;
+
+	DEBUGFUNC("e1000_write_phy_reg_sgmii_82575");
+
+	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+		DEBUGOUT1("PHY Address %d is out of range\n", offset);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_write_phy_reg_i2c(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_id_82575 - Retrieve PHY addr and id
+ *  @hw: pointer to the HW structure
+ *
+ *  Retrieves the PHY address and ID for both PHY's which do and do not use
+ *  sgmi interface.
+ **/
+static s32 e1000_get_phy_id_82575(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32  ret_val = E1000_SUCCESS;
+	u16 phy_id;
+	u32 ctrl_ext;
+	u32 mdic;
+
+	DEBUGFUNC("e1000_get_phy_id_82575");
+
+	/* i354 devices can have a PHY that needs an extra read for id */
+	if (hw->mac.type == e1000_i354)
+		e1000_get_phy_id(hw);
+
+
+	/*
+	 * For SGMII PHYs, we try the list of possible addresses until
+	 * we find one that works.  For non-SGMII PHYs
+	 * (e.g. integrated copper PHYs), an address of 1 should
+	 * work.  The result of this function should mean phy->phy_addr
+	 * and phy->id are set correctly.
+	 */
+	if (!e1000_sgmii_active_82575(hw)) {
+		phy->addr = 1;
+		ret_val = e1000_get_phy_id(hw);
+		goto out;
+	}
+
+	if (e1000_sgmii_uses_mdio_82575(hw)) {
+		switch (hw->mac.type) {
+		case e1000_82575:
+		case e1000_82576:
+			mdic = E1000_READ_REG(hw, E1000_MDIC);
+			mdic &= E1000_MDIC_PHY_MASK;
+			phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
+			break;
+		case e1000_82580:
+		case e1000_i350:
+		case e1000_i354:
+		case e1000_i210:
+		case e1000_i211:
+			mdic = E1000_READ_REG(hw, E1000_MDICNFG);
+			mdic &= E1000_MDICNFG_PHY_MASK;
+			phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
+			break;
+		default:
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+			break;
+		}
+		ret_val = e1000_get_phy_id(hw);
+		goto out;
+	}
+
+	/* Power on sgmii phy if it is disabled */
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT,
+			ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+	E1000_WRITE_FLUSH(hw);
+	msec_delay(300);
+
+	/*
+	 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
+	 * Therefore, we need to test 1-7
+	 */
+	for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+		ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+		if (ret_val == E1000_SUCCESS) {
+			DEBUGOUT2("Vendor ID 0x%08X read at address %u\n",
+				  phy_id, phy->addr);
+			/*
+			 * At the time of this writing, The M88 part is
+			 * the only supported SGMII PHY product.
+			 */
+			if (phy_id == M88_VENDOR)
+				break;
+		} else {
+			DEBUGOUT1("PHY address %u was unreadable\n",
+				  phy->addr);
+		}
+	}
+
+	/* A valid PHY type couldn't be found. */
+	if (phy->addr == 8) {
+		phy->addr = 0;
+		ret_val = -E1000_ERR_PHY;
+	} else {
+		ret_val = e1000_get_phy_id(hw);
+	}
+
+	/* restore previous sfp cage power state */
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575");
+
+	/*
+	 * This isn't a true "hard" reset, but is the only reset
+	 * available to us at this time.
+	 */
+
+	DEBUGOUT("Soft resetting SGMII attached PHY...\n");
+
+	if (!(hw->phy.ops.write_reg))
+		goto out;
+
+	/*
+	 * SFP documentation requires the following to configure the SPF module
+	 * to work on SGMII.  No further documentation is given.
+	 */
+	ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
+	if (ret_val)
+		goto out;
+
+	ret_val = hw->phy.ops.commit(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When
+ *  activating LPLU this function also disables smart speed
+ *  and vice versa.  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u16 data;
+
+	DEBUGFUNC("e1000_set_d0_lplu_state_82575");
+
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		goto out;
+
+	if (active) {
+		data |= IGP02E1000_PM_D0_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			goto out;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					    &data);
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					     data);
+		if (ret_val)
+			goto out;
+	} else {
+		data &= ~IGP02E1000_PM_D0_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					     data);
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				goto out;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				goto out;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When
+ *  activating LPLU this function also disables smart speed
+ *  and vice versa.  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u32 data;
+
+	DEBUGFUNC("e1000_set_d0_lplu_state_82580");
+
+	data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
+
+	if (active) {
+		data |= E1000_82580_PM_D0_LPLU;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		data &= ~E1000_82580_PM_SPD;
+	} else {
+		data &= ~E1000_82580_PM_D0_LPLU;
+
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on)
+			data |= E1000_82580_PM_SPD;
+		else if (phy->smart_speed == e1000_smart_speed_off)
+			data &= ~E1000_82580_PM_SPD;
+	}
+
+	E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
+	return ret_val;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u32 data;
+
+	DEBUGFUNC("e1000_set_d3_lplu_state_82580");
+
+	data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
+
+	if (!active) {
+		data &= ~E1000_82580_PM_D3_LPLU;
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on)
+			data |= E1000_82580_PM_SPD;
+		else if (phy->smart_speed == e1000_smart_speed_off)
+			data &= ~E1000_82580_PM_SPD;
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= E1000_82580_PM_D3_LPLU;
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		data &= ~E1000_82580_PM_SPD;
+	}
+
+	E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
+	return ret_val;
+}
+
+/**
+ *  e1000_acquire_nvm_82575 - Request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the necessary semaphores for exclusive access to the EEPROM.
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_acquire_nvm_82575");
+
+	ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Check if there is some access
+	 * error this access may hook on
+	 */
+	if (hw->mac.type == e1000_i350) {
+		u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+		if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT |
+		    E1000_EECD_TIMEOUT)) {
+			/* Clear all access error flags */
+			E1000_WRITE_REG(hw, E1000_EECD, eecd |
+					E1000_EECD_ERROR_CLR);
+			DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
+		}
+	}
+	if (hw->mac.type == e1000_82580) {
+		u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+		if (eecd & E1000_EECD_BLOCKED) {
+			/* Clear access error flag */
+			E1000_WRITE_REG(hw, E1000_EECD, eecd |
+					E1000_EECD_BLOCKED);
+			DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
+		}
+	}
+
+
+	ret_val = e1000_acquire_nvm_generic(hw);
+	if (ret_val)
+		e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_release_nvm_82575 - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ *  then release the semaphores acquired.
+ **/
+static void e1000_release_nvm_82575(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_release_nvm_82575");
+
+	e1000_release_nvm_generic(hw);
+
+	e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ *  e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
+ *  will also specify which port we're acquiring the lock for.
+ **/
+static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	s32 ret_val = E1000_SUCCESS;
+	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+	DEBUGFUNC("e1000_acquire_swfw_sync_82575");
+
+	while (i < timeout) {
+		if (e1000_get_hw_semaphore_generic(hw)) {
+			ret_val = -E1000_ERR_SWFW_SYNC;
+			goto out;
+		}
+
+		swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask)))
+			break;
+
+		/*
+		 * Firmware currently using resource (fwmask)
+		 * or other software thread using resource (swmask)
+		 */
+		e1000_put_hw_semaphore_generic(hw);
+		msec_delay_irq(5);
+		i++;
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+		ret_val = -E1000_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	swfw_sync |= swmask;
+	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
+
+	e1000_put_hw_semaphore_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_release_swfw_sync_82575 - Release SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
+ *  will also specify which port we're releasing the lock for.
+ **/
+static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+
+	DEBUGFUNC("e1000_release_swfw_sync_82575");
+
+	while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS)
+		; /* Empty */
+
+	swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
+
+	e1000_put_hw_semaphore_generic(hw);
+}
+
+/**
+ *  e1000_get_cfg_done_82575 - Read config done bit
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the management control register for the config done bit for
+ *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ *  to read the config done bit, so an error is *ONLY* logged and returns
+ *  E1000_SUCCESS.  If we were to return with error, EEPROM-less silicon
+ *  would not be able to be reset or change link.
+ **/
+static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = E1000_SUCCESS;
+	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+	DEBUGFUNC("e1000_get_cfg_done_82575");
+
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_NVM_CFG_DONE_PORT_1;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_NVM_CFG_DONE_PORT_2;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_NVM_CFG_DONE_PORT_3;
+	while (timeout) {
+		if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask)
+			break;
+		msec_delay(1);
+		timeout--;
+	}
+	if (!timeout)
+		DEBUGOUT("MNG configuration cycle has not completed.\n");
+
+	/* If EEPROM is not marked present, init the PHY manually */
+	if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) &&
+	    (hw->phy.type == e1000_phy_igp_3))
+		e1000_phy_init_script_igp3(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_link_up_info_82575 - Get link speed/duplex info
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  This is a wrapper function, if using the serial gigabit media independent
+ *  interface, use PCS to retrieve the link speed and duplex information.
+ *  Otherwise, use the generic function to get the link speed and duplex info.
+ **/
+static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
+					u16 *duplex)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_get_link_up_info_82575");
+
+	if (hw->phy.media_type != e1000_media_type_copper)
+		ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed,
+							       duplex);
+	else
+		ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed,
+								    duplex);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_link_82575 - Check for link
+ *  @hw: pointer to the HW structure
+ *
+ *  If sgmii is enabled, then use the pcs register to determine link, otherwise
+ *  use the generic interface for determining link.
+ **/
+static s32 e1000_check_for_link_82575(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 speed, duplex;
+
+	DEBUGFUNC("e1000_check_for_link_82575");
+
+	if (hw->phy.media_type != e1000_media_type_copper) {
+		ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed,
+							       &duplex);
+		/*
+		 * Use this flag to determine if link needs to be checked or
+		 * not.  If we have link clear the flag so that we do not
+		 * continue to check for link.
+		 */
+		hw->mac.get_link_status = !hw->mac.serdes_has_link;
+
+		/*
+		 * Configure Flow Control now that Auto-Neg has completed.
+		 * First, we need to restore the desired flow control
+		 * settings because we may have had to re-autoneg with a
+		 * different link partner.
+		 */
+		ret_val = e1000_config_fc_after_link_up_generic(hw);
+		if (ret_val)
+			DEBUGOUT("Error configuring flow control\n");
+	} else {
+		ret_val = e1000_check_for_copper_link_generic(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_link_media_swap - Check which M88E1112 interface linked
+ *  @hw: pointer to the HW structure
+ *
+ *  Poll the M88E1112 interfaces to see which interface achieved link.
+ */
+static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	u8 port = 0;
+
+	DEBUGFUNC("e1000_check_for_link_media_swap");
+
+	/* Check the copper medium. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (data & E1000_M88E1112_STATUS_LINK)
+		port = E1000_MEDIA_PORT_COPPER;
+
+	/* Check the other medium. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (data & E1000_M88E1112_STATUS_LINK)
+		port = E1000_MEDIA_PORT_OTHER;
+
+	/* Determine if a swap needs to happen. */
+	if (port && (hw->dev_spec._82575.media_port != port)) {
+		hw->dev_spec._82575.media_port = port;
+		hw->dev_spec._82575.media_changed = true;
+	} else {
+		ret_val = e1000_check_for_link_82575(hw);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ *  @hw: pointer to the HW structure
+ **/
+static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("e1000_power_up_serdes_link_82575");
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !e1000_sgmii_active_82575(hw))
+		return;
+
+	/* Enable PCS to turn on link */
+	reg = E1000_READ_REG(hw, E1000_PCS_CFG0);
+	reg |= E1000_PCS_CFG_PCS_EN;
+	E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg);
+
+	/* Power up the laser */
+	reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
+
+	/* flush the write to verify completion */
+	E1000_WRITE_FLUSH(hw);
+	msec_delay(1);
+}
+
+/**
+ *  e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Using the physical coding sub-layer (PCS), retrieve the current speed and
+ *  duplex, then store the values in the pointers provided.
+ **/
+static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
+						u16 *speed, u16 *duplex)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 pcs;
+	u32 status;
+
+	DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575");
+
+	/*
+	 * Read the PCS Status register for link state. For non-copper mode,
+	 * the status register is not accurate. The PCS status register is
+	 * used instead.
+	 */
+	pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT);
+
+	/*
+	 * The link up bit determines when link is up on autoneg.
+	 */
+	if (pcs & E1000_PCS_LSTS_LINK_OK) {
+		mac->serdes_has_link = true;
+
+		/* Detect and store PCS speed */
+		if (pcs & E1000_PCS_LSTS_SPEED_1000)
+			*speed = SPEED_1000;
+		else if (pcs & E1000_PCS_LSTS_SPEED_100)
+			*speed = SPEED_100;
+		else
+			*speed = SPEED_10;
+
+		/* Detect and store PCS duplex */
+		if (pcs & E1000_PCS_LSTS_DUPLEX_FULL)
+			*duplex = FULL_DUPLEX;
+		else
+			*duplex = HALF_DUPLEX;
+
+		/* Check if it is an I354 2.5Gb backplane connection. */
+		if (mac->type == e1000_i354) {
+			status = E1000_READ_REG(hw, E1000_STATUS);
+			if ((status & E1000_STATUS_2P5_SKU) &&
+			    !(status & E1000_STATUS_2P5_SKU_OVER)) {
+				*speed = SPEED_2500;
+				*duplex = FULL_DUPLEX;
+				DEBUGOUT("2500 Mbs, ");
+				DEBUGOUT("Full Duplex\n");
+			}
+		}
+
+	} else {
+		mac->serdes_has_link = false;
+		*speed = 0;
+		*duplex = 0;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_shutdown_serdes_link_82575 - Remove link during power down
+ *  @hw: pointer to the HW structure
+ *
+ *  In the case of serdes shut down sfp and PCS on driver unload
+ *  when management pass through is not enabled.
+ **/
+void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	DEBUGFUNC("e1000_shutdown_serdes_link_82575");
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !e1000_sgmii_active_82575(hw))
+		return;
+
+	if (!e1000_enable_mng_pass_thru(hw)) {
+		/* Disable PCS to turn off link */
+		reg = E1000_READ_REG(hw, E1000_PCS_CFG0);
+		reg &= ~E1000_PCS_CFG_PCS_EN;
+		E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg);
+
+		/* shutdown the laser */
+		reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
+		reg |= E1000_CTRL_EXT_SDP3_DATA;
+		E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
+
+		/* flush the write to verify completion */
+		E1000_WRITE_FLUSH(hw);
+		msec_delay(1);
+	}
+
+	return;
+}
+
+/**
+ *  e1000_reset_hw_82575 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state.
+ **/
+static s32 e1000_reset_hw_82575(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_reset_hw_82575");
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000_disable_pcie_master_generic(hw);
+	if (ret_val)
+		DEBUGOUT("PCI-E Master disable polling has failed.\n");
+
+	/* set the completion timeout for interface */
+	ret_val = e1000_set_pcie_completion_timeout(hw);
+	if (ret_val)
+		DEBUGOUT("PCI-E Set completion timeout has failed.\n");
+
+	DEBUGOUT("Masking off all interrupts\n");
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+
+	E1000_WRITE_REG(hw, E1000_RCTL, 0);
+	E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
+	E1000_WRITE_FLUSH(hw);
+
+	msec_delay(10);
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+	DEBUGOUT("Issuing a global reset to MAC\n");
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+	ret_val = e1000_get_auto_rd_done_generic(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		DEBUGOUT("Auto Read Done did not complete\n");
+	}
+
+	/* If EEPROM is not present, run manual init scripts */
+	if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES))
+		e1000_reset_init_script_82575(hw);
+
+	/* Clear any pending interrupt events. */
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+	E1000_READ_REG(hw, E1000_ICR);
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_hw_82575 - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation.
+ **/
+static s32 e1000_init_hw_82575(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	u16 i, rar_count = mac->rar_entry_count;
+
+	DEBUGFUNC("e1000_init_hw_82575");
+
+	/* Initialize identification LED */
+	ret_val = mac->ops.id_led_init(hw);
+	if (ret_val) {
+		DEBUGOUT("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
+	}
+
+	/* Disabling VLAN filtering */
+	DEBUGOUT("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
+
+	/* Setup the receive address */
+	e1000_init_rx_addrs_generic(hw, rar_count);
+
+	/* Zero out the Multicast HASH table */
+	DEBUGOUT("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+	/* Zero out the Unicast HASH table */
+	DEBUGOUT("Zeroing the UTA\n");
+	for (i = 0; i < mac->uta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+
+	/* Set the default MTU size */
+	hw->dev_spec._82575.mtu = 1500;
+
+	/*
+	 * Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_82575(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_setup_copper_link_82575 - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the link for auto-neg or forced speed and duplex.  Then we check
+ *  for link, once link is established calls to configure collision distance
+ *  and flow control are called.
+ **/
+static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+	u32 phpm_reg;
+
+	DEBUGFUNC("e1000_setup_copper_link_82575");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+	/* Clear Go Link Disconnect bit on supported devices */
+	switch (hw->mac.type) {
+	case e1000_82580:
+	case e1000_i350:
+	case e1000_i210:
+	case e1000_i211:
+		phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
+		phpm_reg &= ~E1000_82580_PM_GO_LINKD;
+		E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg);
+		break;
+	default:
+		break;
+	}
+
+	ret_val = e1000_setup_serdes_link_82575(hw);
+	if (ret_val)
+		goto out;
+
+	if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+		/* allow time for SFP cage time to power up phy */
+		msec_delay(300);
+
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			DEBUGOUT("Error resetting the PHY.\n");
+			goto out;
+		}
+	}
+	switch (hw->phy.type) {
+	case e1000_phy_i210:
+	case e1000_phy_m88:
+		switch (hw->phy.id) {
+		case I347AT4_E_PHY_ID:
+		case M88E1112_E_PHY_ID:
+		case M88E1340M_E_PHY_ID:
+		case M88E1543_E_PHY_ID:
+		case I210_I_PHY_ID:
+			ret_val = e1000_copper_link_setup_m88_gen2(hw);
+			break;
+		default:
+			ret_val = e1000_copper_link_setup_m88(hw);
+			break;
+		}
+		break;
+	case e1000_phy_igp_3:
+		ret_val = e1000_copper_link_setup_igp(hw);
+		break;
+	case e1000_phy_82580:
+		ret_val = e1000_copper_link_setup_82577(hw);
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_setup_copper_link_generic(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_setup_serdes_link_82575 - Setup link for serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
+ *  used on copper connections where the serialized gigabit media independent
+ *  interface (sgmii), or serdes fiber is being used.  Configures the link
+ *  for auto-negotiation or forces speed/duplex.
+ **/
+static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 ctrl_ext, ctrl_reg, reg, anadv_reg;
+	bool pcs_autoneg;
+	s32 ret_val = E1000_SUCCESS;
+	u16 data;
+
+	DEBUGFUNC("e1000_setup_serdes_link_82575");
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !e1000_sgmii_active_82575(hw))
+		return ret_val;
+
+	/*
+	 * On the 82575, SerDes loopback mode persists until it is
+	 * explicitly turned off or a power cycle is performed.  A read to
+	 * the register does not indicate its status.  Therefore, we ensure
+	 * loopback mode is disabled during initialization.
+	 */
+	E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+	/* power on the sfp cage if present */
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+
+	ctrl_reg = E1000_READ_REG(hw, E1000_CTRL);
+	ctrl_reg |= E1000_CTRL_SLU;
+
+	/* set both sw defined pins on 82575/82576*/
+	if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576)
+		ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+	reg = E1000_READ_REG(hw, E1000_PCS_LCTL);
+
+	/* default pcs_autoneg to the same setting as mac autoneg */
+	pcs_autoneg = hw->mac.autoneg;
+
+	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+		/* sgmii mode lets the phy handle forcing speed/duplex */
+		pcs_autoneg = true;
+		/* autoneg time out should be disabled for SGMII mode */
+		reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+		/* disable PCS autoneg and support parallel detect only */
+		pcs_autoneg = false;
+		/* fall through to default case */
+	default:
+		if (hw->mac.type == e1000_82575 ||
+		    hw->mac.type == e1000_82576) {
+			ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+			if (ret_val) {
+				DEBUGOUT("NVM Read Error\n");
+				return ret_val;
+			}
+
+			if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+				pcs_autoneg = false;
+		}
+
+		/*
+		 * non-SGMII modes only supports a speed of 1000/Full for the
+		 * link so it is best to just force the MAC and let the pcs
+		 * link either autoneg or be forced to 1000/Full
+		 */
+		ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+			    E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+		/* set speed of 1000/Full if speed/duplex is forced */
+		reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+		break;
+	}
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg);
+
+	/*
+	 * New SerDes mode allows for forcing speed or autonegotiating speed
+	 * at 1gb. Autoneg should be default set by most drivers. This is the
+	 * mode that will be compatible with older link partners and switches.
+	 * However, both are supported by the hardware and some drivers/tools.
+	 */
+	reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+		 E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+	if (pcs_autoneg) {
+		/* Set PCS register for autoneg */
+		reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+		       E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+
+		/* Disable force flow control for autoneg */
+		reg &= ~E1000_PCS_LCTL_FORCE_FCTRL;
+
+		/* Configure flow control advertisement for autoneg */
+		anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV);
+		anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE);
+
+		switch (hw->fc.requested_mode) {
+		case e1000_fc_full:
+		case e1000_fc_rx_pause:
+			anadv_reg |= E1000_TXCW_ASM_DIR;
+			anadv_reg |= E1000_TXCW_PAUSE;
+			break;
+		case e1000_fc_tx_pause:
+			anadv_reg |= E1000_TXCW_ASM_DIR;
+			break;
+		default:
+			break;
+		}
+
+		E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg);
+
+		DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
+	} else {
+		/* Set PCS register for forced link */
+		reg |= E1000_PCS_LCTL_FSD;	/* Force Speed */
+
+		/* Force flow control for forced link */
+		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+		DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
+	}
+
+	E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg);
+
+	if (!pcs_autoneg && !e1000_sgmii_active_82575(hw))
+		e1000_force_mac_fc_generic(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_media_type_82575 - derives current media type.
+ *  @hw: pointer to the HW structure
+ *
+ *  The media type is chosen reflecting few settings.
+ *  The following are taken into account:
+ *  - link mode set in the current port Init Control Word #3
+ *  - current link mode settings in CSR register
+ *  - MDIO vs. I2C PHY control interface chosen
+ *  - SFP module media type
+ **/
+static s32 e1000_get_media_type_82575(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+	s32 ret_val = E1000_SUCCESS;
+	u32 ctrl_ext = 0;
+	u32 link_mode = 0;
+
+	/* Set internal phy as default */
+	dev_spec->sgmii_active = false;
+	dev_spec->module_plugged = false;
+
+	/* Get CSR setting */
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+
+	/* extract link mode setting */
+	link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK;
+
+	switch (link_mode) {
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+		hw->phy.media_type = e1000_media_type_internal_serdes;
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_GMII:
+		hw->phy.media_type = e1000_media_type_copper;
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+		/* Get phy control interface type set (MDIO vs. I2C)*/
+		if (e1000_sgmii_uses_mdio_82575(hw)) {
+			hw->phy.media_type = e1000_media_type_copper;
+			dev_spec->sgmii_active = true;
+			break;
+		}
+		/* fall through for I2C based SGMII */
+	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+		/* read media type from SFP EEPROM */
+		ret_val = e1000_set_sfp_media_type_82575(hw);
+		if ((ret_val != E1000_SUCCESS) ||
+		    (hw->phy.media_type == e1000_media_type_unknown)) {
+			/*
+			 * If media type was not identified then return media
+			 * type defined by the CTRL_EXT settings.
+			 */
+			hw->phy.media_type = e1000_media_type_internal_serdes;
+
+			if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) {
+				hw->phy.media_type = e1000_media_type_copper;
+				dev_spec->sgmii_active = true;
+			}
+
+			break;
+		}
+
+		/* do not change link mode for 100BaseFX */
+		if (dev_spec->eth_flags.e100_base_fx)
+			break;
+
+		/* change current link mode setting */
+		ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
+
+		if (hw->phy.media_type == e1000_media_type_copper)
+			ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII;
+		else
+			ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+
+		E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_set_sfp_media_type_82575 - derives SFP module media type.
+ *  @hw: pointer to the HW structure
+ *
+ *  The media type is chosen based on SFP module.
+ *  compatibility flags retrieved from SFP ID EEPROM.
+ **/
+static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_ERR_CONFIG;
+	u32 ctrl_ext = 0;
+	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+	struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags;
+	u8 tranceiver_type = 0;
+	s32 timeout = 3;
+
+	/* Turn I2C interface ON and power on sfp cage */
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA);
+
+	E1000_WRITE_FLUSH(hw);
+
+	/* Read SFP module data */
+	while (timeout) {
+		ret_val = e1000_read_sfp_data_byte(hw,
+			E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET),
+			&tranceiver_type);
+		if (ret_val == E1000_SUCCESS)
+			break;
+		msec_delay(100);
+		timeout--;
+	}
+	if (ret_val != E1000_SUCCESS)
+		goto out;
+
+	ret_val = e1000_read_sfp_data_byte(hw,
+			E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET),
+			(u8 *)eth_flags);
+	if (ret_val != E1000_SUCCESS)
+		goto out;
+
+	/* Check if there is some SFP module plugged and powered */
+	if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) ||
+	    (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) {
+		dev_spec->module_plugged = true;
+		if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) {
+			hw->phy.media_type = e1000_media_type_internal_serdes;
+		} else if (eth_flags->e100_base_fx) {
+			dev_spec->sgmii_active = true;
+			hw->phy.media_type = e1000_media_type_internal_serdes;
+		} else if (eth_flags->e1000_base_t) {
+			dev_spec->sgmii_active = true;
+			hw->phy.media_type = e1000_media_type_copper;
+		} else {
+			hw->phy.media_type = e1000_media_type_unknown;
+			DEBUGOUT("PHY module has not been recognized\n");
+			goto out;
+		}
+	} else {
+		hw->phy.media_type = e1000_media_type_unknown;
+	}
+	ret_val = E1000_SUCCESS;
+out:
+	/* Restore I2C interface setting */
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+	return ret_val;
+}
+
+/**
+ *  e1000_valid_led_default_82575 - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_valid_led_default_82575");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+		switch (hw->phy.media_type) {
+		case e1000_media_type_internal_serdes:
+			*data = ID_LED_DEFAULT_82575_SERDES;
+			break;
+		case e1000_media_type_copper:
+		default:
+			*data = ID_LED_DEFAULT;
+			break;
+		}
+	}
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_sgmii_active_82575 - Return sgmii state
+ *  @hw: pointer to the HW structure
+ *
+ *  82575 silicon has a serialized gigabit media independent interface (sgmii)
+ *  which can be enabled for use in the embedded applications.  Simply
+ *  return the current state of the sgmii interface.
+ **/
+static bool e1000_sgmii_active_82575(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+	return dev_spec->sgmii_active;
+}
+
+/**
+ *  e1000_reset_init_script_82575 - Inits HW defaults after reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Inits recommended HW defaults after a reset when there is no EEPROM
+ *  detected. This is only for the 82575.
+ **/
+static s32 e1000_reset_init_script_82575(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_reset_init_script_82575");
+
+	if (hw->mac.type == e1000_82575) {
+		DEBUGOUT("Running reset init script for 82575\n");
+		/* SerDes configuration via SERDESCTRL */
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15);
+
+		/* CCM configuration via CCMCTL register */
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00);
+
+		/* PCIe lanes configuration */
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+		/* PCIe PLL Configuration */
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00);
+		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_mac_addr_82575 - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_read_mac_addr_82575");
+
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_config_collision_dist_82575 - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+static void e1000_config_collision_dist_82575(struct e1000_hw *hw)
+{
+	u32 tctl_ext;
+
+	DEBUGFUNC("e1000_config_collision_dist_82575");
+
+	tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT);
+
+	tctl_ext &= ~E1000_TCTL_EXT_COLD;
+	tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT;
+
+	E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ * e1000_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+
+	if (!(phy->ops.check_reset_block))
+		return;
+
+	/* If the management interface is not enabled, then power down */
+	if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
+ *  e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_clear_hw_cntrs_82575");
+
+	e1000_clear_hw_cntrs_base_generic(hw);
+
+	E1000_READ_REG(hw, E1000_PRC64);
+	E1000_READ_REG(hw, E1000_PRC127);
+	E1000_READ_REG(hw, E1000_PRC255);
+	E1000_READ_REG(hw, E1000_PRC511);
+	E1000_READ_REG(hw, E1000_PRC1023);
+	E1000_READ_REG(hw, E1000_PRC1522);
+	E1000_READ_REG(hw, E1000_PTC64);
+	E1000_READ_REG(hw, E1000_PTC127);
+	E1000_READ_REG(hw, E1000_PTC255);
+	E1000_READ_REG(hw, E1000_PTC511);
+	E1000_READ_REG(hw, E1000_PTC1023);
+	E1000_READ_REG(hw, E1000_PTC1522);
+
+	E1000_READ_REG(hw, E1000_ALGNERRC);
+	E1000_READ_REG(hw, E1000_RXERRC);
+	E1000_READ_REG(hw, E1000_TNCRS);
+	E1000_READ_REG(hw, E1000_CEXTERR);
+	E1000_READ_REG(hw, E1000_TSCTC);
+	E1000_READ_REG(hw, E1000_TSCTFC);
+
+	E1000_READ_REG(hw, E1000_MGTPRC);
+	E1000_READ_REG(hw, E1000_MGTPDC);
+	E1000_READ_REG(hw, E1000_MGTPTC);
+
+	E1000_READ_REG(hw, E1000_IAC);
+	E1000_READ_REG(hw, E1000_ICRXOC);
+
+	E1000_READ_REG(hw, E1000_ICRXPTC);
+	E1000_READ_REG(hw, E1000_ICRXATC);
+	E1000_READ_REG(hw, E1000_ICTXPTC);
+	E1000_READ_REG(hw, E1000_ICTXATC);
+	E1000_READ_REG(hw, E1000_ICTXQEC);
+	E1000_READ_REG(hw, E1000_ICTXQMTC);
+	E1000_READ_REG(hw, E1000_ICRXDMTC);
+
+	E1000_READ_REG(hw, E1000_CBTMPC);
+	E1000_READ_REG(hw, E1000_HTDPMC);
+	E1000_READ_REG(hw, E1000_CBRMPC);
+	E1000_READ_REG(hw, E1000_RPTHC);
+	E1000_READ_REG(hw, E1000_HGPTC);
+	E1000_READ_REG(hw, E1000_HTCBDPC);
+	E1000_READ_REG(hw, E1000_HGORCL);
+	E1000_READ_REG(hw, E1000_HGORCH);
+	E1000_READ_REG(hw, E1000_HGOTCL);
+	E1000_READ_REG(hw, E1000_HGOTCH);
+	E1000_READ_REG(hw, E1000_LENERRS);
+
+	/* This register should not be read in copper configurations */
+	if ((hw->phy.media_type == e1000_media_type_internal_serdes) ||
+	    e1000_sgmii_active_82575(hw))
+		E1000_READ_REG(hw, E1000_SCVPC);
+}
+
+/**
+ *  e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable
+ *  @hw: pointer to the HW structure
+ *
+ *  After rx enable if managability is enabled then there is likely some
+ *  bad data at the start of the fifo and possibly in the DMA fifo.  This
+ *  function clears the fifos and flushes any packets that came in as rx was
+ *  being enabled.
+ **/
+void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+	int i, ms_wait;
+
+	DEBUGFUNC("e1000_rx_fifo_workaround_82575");
+	if (hw->mac.type != e1000_82575 ||
+	    !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+		return;
+
+	/* Disable all Rx queues */
+	for (i = 0; i < 4; i++) {
+		rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i));
+		E1000_WRITE_REG(hw, E1000_RXDCTL(i),
+				rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+	}
+	/* Poll all queues to verify they have shut down */
+	for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+		msec_delay(1);
+		rx_enabled = 0;
+		for (i = 0; i < 4; i++)
+			rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i));
+		if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+			break;
+	}
+
+	if (ms_wait == 10)
+		DEBUGOUT("Queue disable timed out after 10ms\n");
+
+	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+	 * incoming packets are rejected.  Set enable and wait 2ms so that
+	 * any packet that was coming in as RCTL.EN was set is flushed
+	 */
+	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
+	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+	rlpml = E1000_READ_REG(hw, E1000_RLPML);
+	E1000_WRITE_REG(hw, E1000_RLPML, 0);
+
+	rctl = E1000_READ_REG(hw, E1000_RCTL);
+	temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+	temp_rctl |= E1000_RCTL_LPE;
+
+	E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl);
+	E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+	E1000_WRITE_FLUSH(hw);
+	msec_delay(2);
+
+	/* Enable Rx queues that were previously enabled and restore our
+	 * previous state
+	 */
+	for (i = 0; i < 4; i++)
+		E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]);
+	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+	E1000_WRITE_FLUSH(hw);
+
+	E1000_WRITE_REG(hw, E1000_RLPML, rlpml);
+	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
+
+	/* Flush receive errors generated by workaround */
+	E1000_READ_REG(hw, E1000_ROC);
+	E1000_READ_REG(hw, E1000_RNBC);
+	E1000_READ_REG(hw, E1000_MPC);
+}
+
+/**
+ *  e1000_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 200ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+	u32 gcr = E1000_READ_REG(hw, E1000_GCR);
+	s32 ret_val = E1000_SUCCESS;
+	u16 pcie_devctl2;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 200ms through the GCR register
+	 */
+	if (!(gcr & E1000_GCR_CAP_VER2)) {
+		gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+					  &pcie_devctl2);
+	if (ret_val)
+		goto out;
+
+	pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+	ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+					   &pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+	E1000_WRITE_REG(hw, E1000_GCR, gcr);
+	return ret_val;
+}
+
+/**
+ *  e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *  @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ *  enables/disables L2 switch anti-spoofing functionality.
+ **/
+void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+	u32 reg_val, reg_offset;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+		reg_offset = E1000_DTXSWC;
+		break;
+	case e1000_i350:
+	case e1000_i354:
+		reg_offset = E1000_TXSWC;
+		break;
+	default:
+		return;
+	}
+
+	reg_val = E1000_READ_REG(hw, reg_offset);
+	if (enable) {
+		reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+			     E1000_DTXSWC_VLAN_SPOOF_MASK);
+		/* The PF can spoof - it has to in order to
+		 * support emulation mode NICs
+		 */
+		reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+	} else {
+		reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+			     E1000_DTXSWC_VLAN_SPOOF_MASK);
+	}
+	E1000_WRITE_REG(hw, reg_offset, reg_val);
+}
+
+/**
+ *  e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *
+ *  enables/disables L2 switch loopback functionality.
+ **/
+void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
+{
+	u32 dtxswc;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+		dtxswc = E1000_READ_REG(hw, E1000_DTXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc);
+		break;
+	case e1000_i350:
+	case e1000_i354:
+		dtxswc = E1000_READ_REG(hw, E1000_TXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc);
+		break;
+	default:
+		/* Currently no other hardware supports loopback */
+		break;
+	}
+
+
+}
+
+/**
+ *  e1000_vmdq_set_replication_pf - enable or disable vmdq replication
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *
+ *  enables/disables replication of packets across multiple pools.
+ **/
+void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
+{
+	u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL);
+
+	if (enable)
+		vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
+	else
+		vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
+
+	E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl);
+}
+
+/**
+ *  e1000_read_phy_reg_82580 - Read 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_read_phy_reg_82580");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_read_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_82580 - Write 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_write_phy_reg_82580");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_write_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ *  the values found in the EEPROM.  This addresses an issue in which these
+ *  bits are not restored from EEPROM after reset.
+ **/
+static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u32 mdicnfg;
+	u16 nvm_data = 0;
+
+	DEBUGFUNC("e1000_reset_mdicnfg_82580");
+
+	if (hw->mac.type != e1000_82580)
+		goto out;
+	if (!e1000_sgmii_active_82575(hw))
+		goto out;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+				   NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+				   &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG);
+	if (nvm_data & NVM_WORD24_EXT_MDIO)
+		mdicnfg |= E1000_MDICNFG_EXT_MDIO;
+	if (nvm_data & NVM_WORD24_COM_MDIO)
+		mdicnfg |= E1000_MDICNFG_COM_MDIO;
+	E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_reset_hw_82580 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets function or entire device (all ports, etc.)
+ *  to a known state.
+ **/
+static s32 e1000_reset_hw_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	/* BH SW mailbox bit in SW_FW_SYNC */
+	u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+	u32 ctrl;
+	bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+	DEBUGFUNC("e1000_reset_hw_82580");
+
+	hw->dev_spec._82575.global_device_reset = false;
+
+	/* 82580 does not reliably do global_device_reset due to hw errata */
+	if (hw->mac.type == e1000_82580)
+		global_device_reset = false;
+
+	/* Get current control state. */
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000_disable_pcie_master_generic(hw);
+	if (ret_val)
+		DEBUGOUT("PCI-E Master disable polling has failed.\n");
+
+	DEBUGOUT("Masking off all interrupts\n");
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+	E1000_WRITE_REG(hw, E1000_RCTL, 0);
+	E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
+	E1000_WRITE_FLUSH(hw);
+
+	msec_delay(10);
+
+	/* Determine whether or not a global dev reset is requested */
+	if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw,
+	    swmbsw_mask))
+			global_device_reset = false;
+
+	if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) &
+	    E1000_STAT_DEV_RST_SET))
+		ctrl |= E1000_CTRL_DEV_RST;
+	else
+		ctrl |= E1000_CTRL_RST;
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+	E1000_WRITE_FLUSH(hw);
+
+	/* Add delay to insure DEV_RST has time to complete */
+	if (global_device_reset)
+		msec_delay(5);
+
+	ret_val = e1000_get_auto_rd_done_generic(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		DEBUGOUT("Auto Read Done did not complete\n");
+	}
+
+	/* clear global device reset status bit */
+	E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+	/* Clear any pending interrupt events. */
+	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+	E1000_READ_REG(hw, E1000_ICR);
+
+	ret_val = e1000_reset_mdicnfg_82580(hw);
+	if (ret_val)
+		DEBUGOUT("Could not reset MDICNFG based on EEPROM\n");
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+
+	/* Release semaphore */
+	if (global_device_reset)
+		hw->mac.ops.release_swfw_sync(hw, swmbsw_mask);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size
+ *  @data: data received by reading RXPBS register
+ *
+ *  The 82580 uses a table based approach for packet buffer allocation sizes.
+ *  This function converts the retrieved value into the correct table value
+ *     0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ *  0x0 36  72 144   1   2   4   8  16
+ *  0x8 35  70 140 rsv rsv rsv rsv rsv
+ */
+u16 e1000_rxpbs_adjust_82580(u32 data)
+{
+	u16 ret_val = 0;
+
+	if (data < E1000_82580_RXPBS_TABLE_SIZE)
+		ret_val = e1000_82580_rxpbs_table[data];
+
+	return ret_val;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_with_offset - Validate EEPROM
+ *  checksum
+ *  @hw: pointer to the HW structure
+ *  @offset: offset in words of the checksum protected region
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_with_offset");
+
+	for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16) NVM_SUM) {
+		DEBUGOUT("NVM Checksum Invalid\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_with_offset - Update EEPROM
+ *  checksum
+ *  @hw: pointer to the HW structure
+ *  @offset: offset in words of the checksum protected region
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_update_nvm_checksum_with_offset");
+
+	for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error while updating checksum.\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16) NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
+				    &checksum);
+	if (ret_val)
+		DEBUGOUT("NVM Write Error while updating checksum.\n");
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM section checksum by reading/adding each word of
+ *  the EEPROM and then verifies that the sum of the EEPROM is
+ *  equal to 0xBABA.
+ **/
+static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 eeprom_regions_count = 1;
+	u16 j, nvm_data;
+	u16 nvm_offset;
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_82580");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
+		/* if chekcsums compatibility bit is set validate checksums
+		 * for all 4 ports. */
+		eeprom_regions_count = 4;
+	}
+
+	for (j = 0; j < eeprom_regions_count; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = e1000_validate_nvm_checksum_with_offset(hw,
+								  nvm_offset);
+		if (ret_val != E1000_SUCCESS)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_82580 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM section checksums for all 4 ports by reading/adding
+ *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
+ *  checksum and writes the value to the EEPROM.
+ **/
+static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 j, nvm_data;
+	u16 nvm_offset;
+
+	DEBUGFUNC("e1000_update_nvm_checksum_82580");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n");
+		goto out;
+	}
+
+	if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) {
+		/* set compatibility bit to validate checksums appropriately */
+		nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
+		ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
+					    &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n");
+			goto out;
+		}
+	}
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM section checksum by reading/adding each word of
+ *  the EEPROM and then verifies that the sum of the EEPROM is
+ *  equal to 0xBABA.
+ **/
+static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 j;
+	u16 nvm_offset;
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_i350");
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = e1000_validate_nvm_checksum_with_offset(hw,
+								  nvm_offset);
+		if (ret_val != E1000_SUCCESS)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_i350 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM section checksums for all 4 ports by reading/adding
+ *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
+ *  checksum and writes the value to the EEPROM.
+ **/
+static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 j;
+	u16 nvm_offset;
+
+	DEBUGFUNC("e1000_update_nvm_checksum_i350");
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset);
+		if (ret_val != E1000_SUCCESS)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  __e1000_access_emi_reg - Read/write EMI register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: pointer to value to read/write from/to the EMI address
+ *  @read: boolean flag to indicate read or write
+ **/
+static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address,
+				  u16 *data, bool read)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("__e1000_access_emi_reg");
+
+	ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address);
+	if (ret_val)
+		return ret_val;
+
+	if (read)
+		ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data);
+	else
+		ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_emi_reg - Read Extended Management Interface register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: value to be read from the EMI address
+ **/
+s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
+{
+	DEBUGFUNC("e1000_read_emi_reg");
+
+	return __e1000_access_emi_reg(hw, addr, data, true);
+}
+
+/**
+ *  e1000_set_eee_i350 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 e1000_set_eee_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u32 ipcnfg, eeer;
+
+	DEBUGFUNC("e1000_set_eee_i350");
+
+	if ((hw->mac.type < e1000_i350) ||
+	    (hw->phy.media_type != e1000_media_type_copper))
+		goto out;
+	ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG);
+	eeer = E1000_READ_REG(hw, E1000_EEER);
+
+	/* enable or disable per user setting */
+	if (!(hw->dev_spec._82575.eee_disable)) {
+		u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU);
+
+		ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
+		eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
+			 E1000_EEER_LPI_FC);
+
+		/* This bit should not be set in normal operation. */
+		if (eee_su & E1000_EEE_SU_LPI_CLK_STP)
+			DEBUGOUT("LPI Clock Stop Bit should not be set!\n");
+	} else {
+		ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
+		eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
+			  E1000_EEER_LPI_FC);
+	}
+	E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg);
+	E1000_WRITE_REG(hw, E1000_EEER, eeer);
+	E1000_READ_REG(hw, E1000_IPCNFG);
+	E1000_READ_REG(hw, E1000_EEER);
+out:
+
+	return ret_val;
+}
+
+/**
+ *  e1000_set_eee_i354 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
+ *
+ **/
+s32 e1000_set_eee_i354(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_set_eee_i354");
+
+	if ((hw->phy.media_type != e1000_media_type_copper) ||
+	    ((phy->id != M88E1543_E_PHY_ID)))
+		goto out;
+
+	if (!hw->dev_spec._82575.eee_disable) {
+		/* Switch to PHY page 18. */
+		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+					    &phy_data);
+		if (ret_val)
+			goto out;
+
+		phy_data |= E1000_M88E1543_EEE_CTRL_1_MS;
+		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+					     phy_data);
+		if (ret_val)
+			goto out;
+
+		/* Return the PHY to page 0. */
+		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+		if (ret_val)
+			goto out;
+
+		/* Turn on EEE advertisement. */
+		ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+					       E1000_EEE_ADV_DEV_I354,
+					       &phy_data);
+		if (ret_val)
+			goto out;
+
+		phy_data |= E1000_EEE_ADV_100_SUPPORTED |
+			    E1000_EEE_ADV_1000_SUPPORTED;
+		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+						E1000_EEE_ADV_DEV_I354,
+						phy_data);
+	} else {
+		/* Turn off EEE advertisement. */
+		ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+					       E1000_EEE_ADV_DEV_I354,
+					       &phy_data);
+		if (ret_val)
+			goto out;
+
+		phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED |
+			      E1000_EEE_ADV_1000_SUPPORTED);
+		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+						E1000_EEE_ADV_DEV_I354,
+						phy_data);
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_eee_status_i354 - Get EEE status
+ *  @hw: pointer to the HW structure
+ *  @status: EEE status
+ *
+ *  Get EEE status by guessing based on whether Tx or Rx LPI indications have
+ *  been received.
+ **/
+s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_get_eee_status_i354");
+
+	/* Check if EEE is supported on this device. */
+	if ((hw->phy.media_type != e1000_media_type_copper) ||
+	    ((phy->id != M88E1543_E_PHY_ID)))
+		goto out;
+
+	ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
+				       E1000_PCS_STATUS_DEV_I354,
+				       &phy_data);
+	if (ret_val)
+		goto out;
+
+	*status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD |
+			      E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false;
+
+out:
+	return ret_val;
+}
+
+/* Due to a hw errata, if the host tries to  configure the VFTA register
+ * while performing queries from the BMC or DMA, then the VFTA in some
+ * cases won't be written.
+ */
+
+/**
+ *  e1000_clear_vfta_i350 - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void e1000_clear_vfta_i350(struct e1000_hw *hw)
+{
+	u32 offset;
+	int i;
+
+	DEBUGFUNC("e1000_clear_vfta_350");
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		for (i = 0; i < 10; i++)
+			E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+
+		E1000_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  e1000_write_vfta_i350 - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	int i;
+
+	DEBUGFUNC("e1000_write_vfta_350");
+
+	for (i = 0; i < 10; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
+
+	E1000_WRITE_FLUSH(hw);
+}
+
+
+/**
+ *  e1000_set_i2c_bb - Enable I2C bit-bang
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable I2C bit-bang interface
+ *
+ **/
+s32 e1000_set_i2c_bb(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u32 ctrl_ext, i2cparams;
+
+	DEBUGFUNC("e1000_set_i2c_bb");
+
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_I2C_ENA;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+	E1000_WRITE_FLUSH(hw);
+
+	i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS);
+	i2cparams |= E1000_I2CBB_EN;
+	i2cparams |= E1000_I2C_DATA_OE_N;
+	i2cparams |= E1000_I2C_CLK_OE_N;
+	E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams);
+	E1000_WRITE_FLUSH(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_i2c_byte_generic - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
+ *  @data: value read
+ *
+ *  Performs byte read operation over I2C interface at
+ *  a specified device address.
+ **/
+s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	s32 status = E1000_SUCCESS;
+	u32 max_retry = 10;
+	u32 retry = 1;
+	u16 swfw_mask = 0;
+
+	bool nack = true;
+
+	DEBUGFUNC("e1000_read_i2c_byte_generic");
+
+	swfw_mask = E1000_SWFW_PHY0_SM;
+
+	do {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+		    != E1000_SUCCESS) {
+			status = E1000_ERR_SWFW_SYNC;
+			goto read_byte_out;
+		}
+
+		e1000_i2c_start(hw);
+
+		/* Device Address and write indication */
+		status = e1000_clock_out_i2c_byte(hw, dev_addr);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_clock_out_i2c_byte(hw, byte_offset);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		e1000_i2c_start(hw);
+
+		/* Device Address and read indication */
+		status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_clock_in_i2c_byte(hw, data);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_clock_out_i2c_bit(hw, nack);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		e1000_i2c_stop(hw);
+		break;
+
+fail:
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		msec_delay(100);
+		e1000_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte read error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte read error.\n");
+
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+read_byte_out:
+
+	return status;
+}
+
+/**
+ *  e1000_write_i2c_byte_generic - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: value to write
+ *
+ *  Performs byte write operation over I2C interface at
+ *  a specified device address.
+ **/
+s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	s32 status = E1000_SUCCESS;
+	u32 max_retry = 1;
+	u32 retry = 0;
+	u16 swfw_mask = 0;
+
+	DEBUGFUNC("e1000_write_i2c_byte_generic");
+
+	swfw_mask = E1000_SWFW_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) {
+		status = E1000_ERR_SWFW_SYNC;
+		goto write_byte_out;
+	}
+
+	do {
+		e1000_i2c_start(hw);
+
+		status = e1000_clock_out_i2c_byte(hw, dev_addr);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_clock_out_i2c_byte(hw, byte_offset);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_clock_out_i2c_byte(hw, data);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		status = e1000_get_i2c_ack(hw);
+		if (status != E1000_SUCCESS)
+			goto fail;
+
+		e1000_i2c_stop(hw);
+		break;
+
+fail:
+		e1000_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte write error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte write error.\n");
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+write_byte_out:
+
+	return status;
+}
+
+/**
+ *  e1000_i2c_start - Sets I2C start condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C start condition (High -> Low on SDA while SCL is High)
+ **/
+static void e1000_i2c_start(struct e1000_hw *hw)
+{
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+
+	DEBUGFUNC("e1000_i2c_start");
+
+	/* Start condition must begin with data and clock high */
+	e1000_set_i2c_data(hw, &i2cctl, 1);
+	e1000_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for start condition (4.7us) */
+	usec_delay(E1000_I2C_T_SU_STA);
+
+	e1000_set_i2c_data(hw, &i2cctl, 0);
+
+	/* Hold time for start condition (4us) */
+	usec_delay(E1000_I2C_T_HD_STA);
+
+	e1000_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(E1000_I2C_T_LOW);
+
+}
+
+/**
+ *  e1000_i2c_stop - Sets I2C stop condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ **/
+static void e1000_i2c_stop(struct e1000_hw *hw)
+{
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+
+	DEBUGFUNC("e1000_i2c_stop");
+
+	/* Stop condition must begin with data low and clock high */
+	e1000_set_i2c_data(hw, &i2cctl, 0);
+	e1000_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for stop condition (4us) */
+	usec_delay(E1000_I2C_T_SU_STO);
+
+	e1000_set_i2c_data(hw, &i2cctl, 1);
+
+	/* bus free time between stop and start (4.7us)*/
+	usec_delay(E1000_I2C_T_BUF);
+}
+
+/**
+ *  e1000_clock_in_i2c_byte - Clocks in one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte to clock in
+ *
+ *  Clocks in one byte data via I2C data/clock
+ **/
+static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data)
+{
+	s32 i;
+	bool bit = 0;
+
+	DEBUGFUNC("e1000_clock_in_i2c_byte");
+
+	*data = 0;
+	for (i = 7; i >= 0; i--) {
+		e1000_clock_in_i2c_bit(hw, &bit);
+		*data |= bit << i;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_clock_out_i2c_byte - Clocks out one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte clocked out
+ *
+ *  Clocks out one byte data via I2C data/clock
+ **/
+static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data)
+{
+	s32 status = E1000_SUCCESS;
+	s32 i;
+	u32 i2cctl;
+	bool bit = 0;
+
+	DEBUGFUNC("e1000_clock_out_i2c_byte");
+
+	for (i = 7; i >= 0; i--) {
+		bit = (data >> i) & 0x1;
+		status = e1000_clock_out_i2c_bit(hw, bit);
+
+		if (status != E1000_SUCCESS)
+			break;
+	}
+
+	/* Release SDA line (set high) */
+	i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+
+	i2cctl |= E1000_I2C_DATA_OE_N;
+	E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl);
+	E1000_WRITE_FLUSH(hw);
+
+	return status;
+}
+
+/**
+ *  e1000_get_i2c_ack - Polls for I2C ACK
+ *  @hw: pointer to hardware structure
+ *
+ *  Clocks in/out one bit via I2C data/clock
+ **/
+static s32 e1000_get_i2c_ack(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	u32 i = 0;
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+	u32 timeout = 10;
+	bool ack = true;
+
+	DEBUGFUNC("e1000_get_i2c_ack");
+
+	e1000_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(E1000_I2C_T_HIGH);
+
+	/* Wait until SCL returns high */
+	for (i = 0; i < timeout; i++) {
+		usec_delay(1);
+		i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+		if (i2cctl & E1000_I2C_CLK_IN)
+			break;
+	}
+	if (!(i2cctl & E1000_I2C_CLK_IN))
+		return E1000_ERR_I2C;
+
+	ack = e1000_get_i2c_data(&i2cctl);
+	if (ack) {
+		DEBUGOUT("I2C ack was not received.\n");
+		status = E1000_ERR_I2C;
+	}
+
+	e1000_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(E1000_I2C_T_LOW);
+
+	return status;
+}
+
+/**
+ *  e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: read data value
+ *
+ *  Clocks in one bit via I2C data/clock
+ **/
+static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data)
+{
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+
+	DEBUGFUNC("e1000_clock_in_i2c_bit");
+
+	e1000_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(E1000_I2C_T_HIGH);
+
+	i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+	*data = e1000_get_i2c_data(&i2cctl);
+
+	e1000_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(E1000_I2C_T_LOW);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: data value to write
+ *
+ *  Clocks out one bit via I2C data/clock
+ **/
+static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data)
+{
+	s32 status;
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+
+	DEBUGFUNC("e1000_clock_out_i2c_bit");
+
+	status = e1000_set_i2c_data(hw, &i2cctl, data);
+	if (status == E1000_SUCCESS) {
+		e1000_raise_i2c_clk(hw, &i2cctl);
+
+		/* Minimum high period of clock is 4us */
+		usec_delay(E1000_I2C_T_HIGH);
+
+		e1000_lower_i2c_clk(hw, &i2cctl);
+
+		/* Minimum low period of clock is 4.7 us.
+		 * This also takes care of the data hold time.
+		 */
+		usec_delay(E1000_I2C_T_LOW);
+	} else {
+		status = E1000_ERR_I2C;
+		DEBUGOUT1("I2C data was not set to %X\n", data);
+	}
+
+	return status;
+}
+/**
+ *  e1000_raise_i2c_clk - Raises the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Raises the I2C clock line '0'->'1'
+ **/
+static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl)
+{
+	DEBUGFUNC("e1000_raise_i2c_clk");
+
+	*i2cctl |= E1000_I2C_CLK_OUT;
+	*i2cctl &= ~E1000_I2C_CLK_OE_N;
+	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
+	E1000_WRITE_FLUSH(hw);
+
+	/* SCL rise time (1000ns) */
+	usec_delay(E1000_I2C_T_RISE);
+}
+
+/**
+ *  e1000_lower_i2c_clk - Lowers the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Lowers the I2C clock line '1'->'0'
+ **/
+static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl)
+{
+
+	DEBUGFUNC("e1000_lower_i2c_clk");
+
+	*i2cctl &= ~E1000_I2C_CLK_OUT;
+	*i2cctl &= ~E1000_I2C_CLK_OE_N;
+	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
+	E1000_WRITE_FLUSH(hw);
+
+	/* SCL fall time (300ns) */
+	usec_delay(E1000_I2C_T_FALL);
+}
+
+/**
+ *  e1000_set_i2c_data - Sets the I2C data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *  @data: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ **/
+static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data)
+{
+	s32 status = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_set_i2c_data");
+
+	if (data)
+		*i2cctl |= E1000_I2C_DATA_OUT;
+	else
+		*i2cctl &= ~E1000_I2C_DATA_OUT;
+
+	*i2cctl &= ~E1000_I2C_DATA_OE_N;
+	*i2cctl |= E1000_I2C_CLK_OE_N;
+	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
+	E1000_WRITE_FLUSH(hw);
+
+	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+	usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA);
+
+	*i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+	if (data != e1000_get_i2c_data(i2cctl)) {
+		status = E1000_ERR_I2C;
+		DEBUGOUT1("Error - I2C data was not set to %X.\n", data);
+	}
+
+	return status;
+}
+
+/**
+ *  e1000_get_i2c_data - Reads the I2C SDA data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ **/
+static bool e1000_get_i2c_data(u32 *i2cctl)
+{
+	bool data;
+
+	DEBUGFUNC("e1000_get_i2c_data");
+
+	if (*i2cctl & E1000_I2C_DATA_IN)
+		data = 1;
+	else
+		data = 0;
+
+	return data;
+}
+
+/**
+ *  e1000_i2c_bus_clear - Clears the I2C bus
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the I2C bus by sending nine clock pulses.
+ *  Used when data line is stuck low.
+ **/
+void e1000_i2c_bus_clear(struct e1000_hw *hw)
+{
+	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
+	u32 i;
+
+	DEBUGFUNC("e1000_i2c_bus_clear");
+
+	e1000_i2c_start(hw);
+
+	e1000_set_i2c_data(hw, &i2cctl, 1);
+
+	for (i = 0; i < 9; i++) {
+		e1000_raise_i2c_clk(hw, &i2cctl);
+
+		/* Min high period of clock is 4us */
+		usec_delay(E1000_I2C_T_HIGH);
+
+		e1000_lower_i2c_clk(hw, &i2cctl);
+
+		/* Min low period of clock is 4.7us*/
+		usec_delay(E1000_I2C_T_LOW);
+	}
+
+	e1000_i2c_start(hw);
+
+	/* Put the i2c bus back to default state */
+	e1000_i2c_stop(hw);
+}
+
+static const u8 e1000_emc_temp_data[4] = {
+	E1000_EMC_INTERNAL_DATA,
+	E1000_EMC_DIODE1_DATA,
+	E1000_EMC_DIODE2_DATA,
+	E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+	E1000_EMC_INTERNAL_THERM_LIMIT,
+	E1000_EMC_DIODE1_THERM_LIMIT,
+	E1000_EMC_DIODE2_THERM_LIMIT,
+	E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  i;
+	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("e1000_get_thermal_sensor_data_generic");
+
+	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+		return E1000_NOT_IMPLEMENTED;
+
+	data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF);
+
+	/* Return the internal sensor only if ETS is unsupported */
+	e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset);
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+		return status;
+
+	e1000_read_nvm(hw, ets_offset, 1, &ets_cfg);
+	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+	    != NVM_ETS_TYPE_EMC)
+		return E1000_NOT_IMPLEMENTED;
+
+	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > E1000_MAX_SENSORS)
+		num_sensors = E1000_MAX_SENSORS;
+
+	for (i = 1; i < num_sensors; i++) {
+		e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor);
+		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+				NVM_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+				   NVM_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0)
+			hw->phy.ops.read_i2c_byte(hw,
+					e1000_emc_temp_data[sensor_index],
+					E1000_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+	}
+	return status;
+}
+
+/**
+ *  e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the thermal sensor thresholds according to the NVM map
+ *  and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  therm_limit;
+	u8  i;
+	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic");
+
+	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+		return E1000_NOT_IMPLEMENTED;
+
+	memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+	data->sensor[0].location = 0x1;
+	data->sensor[0].caution_thresh =
+		(E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF);
+	data->sensor[0].max_op_thresh =
+		(E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF);
+
+	/* Return the internal sensor only if ETS is unsupported */
+	e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset);
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+		return status;
+
+	e1000_read_nvm(hw, ets_offset, 1, &ets_cfg);
+	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+	    != NVM_ETS_TYPE_EMC)
+		return E1000_NOT_IMPLEMENTED;
+
+	low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+			    NVM_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+	for (i = 1; i <= num_sensors; i++) {
+		e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor);
+		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+				NVM_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+				   NVM_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			e1000_emc_therm_limit[sensor_index],
+			E1000_I2C_THERMAL_SENSOR_ADDR,
+			therm_limit);
+
+		if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+			data->sensor[i].location = sensor_location;
+			data->sensor[i].caution_thresh = therm_limit;
+			data->sensor[i].max_op_thresh = therm_limit -
+							low_thresh_delta;
+		}
+	}
+	return status;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.h b/kernel/linux/kni/ethtool/igb/e1000_82575.h
new file mode 100644
index 0000000..2e0dbb2
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_82575.h
@@ -0,0 +1,494 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+#define ID_LED_DEFAULT_82575_SERDES	((ID_LED_DEF1_DEF2 << 12) | \
+					 (ID_LED_DEF1_DEF2 <<  8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_ON2))
+/*
+ * Receive Address Register Count
+ * Number of high/low register pairs in the RAR.  The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * These entries are also used for MAC-based filtering.
+ */
+/*
+ * For 82576, there are an additional set of RARs that begin at an offset
+ * separate from the first set of RARs.
+ */
+#define E1000_RAR_ENTRIES_82575	16
+#define E1000_RAR_ENTRIES_82576	24
+#define E1000_RAR_ENTRIES_82580	24
+#define E1000_RAR_ENTRIES_I350	32
+#define E1000_SW_SYNCH_MB	0x00000100
+#define E1000_STAT_DEV_RST_SET	0x00100000
+#define E1000_CTRL_DEV_RST	0x20000000
+
+struct e1000_adv_data_desc {
+	__le64 buffer_addr;    /* Address of the descriptor's data buffer */
+	union {
+		u32 data;
+		struct {
+			u32 datalen:16; /* Data buffer length */
+			u32 rsvd:4;
+			u32 dtyp:4;  /* Descriptor type */
+			u32 dcmd:8;  /* Descriptor command */
+		} config;
+	} lower;
+	union {
+		u32 data;
+		struct {
+			u32 status:4;  /* Descriptor status */
+			u32 idx:4;
+			u32 popts:6;  /* Packet Options */
+			u32 paylen:18; /* Payload length */
+		} options;
+	} upper;
+};
+
+#define E1000_TXD_DTYP_ADV_C	0x2  /* Advanced Context Descriptor */
+#define E1000_TXD_DTYP_ADV_D	0x3  /* Advanced Data Descriptor */
+#define E1000_ADV_TXD_CMD_DEXT	0x20 /* Descriptor extension (0 = legacy) */
+#define E1000_ADV_TUCMD_IPV4	0x2  /* IP Packet Type: 1=IPv4 */
+#define E1000_ADV_TUCMD_IPV6	0x0  /* IP Packet Type: 0=IPv6 */
+#define E1000_ADV_TUCMD_L4T_UDP	0x0  /* L4 Packet TYPE of UDP */
+#define E1000_ADV_TUCMD_L4T_TCP	0x4  /* L4 Packet TYPE of TCP */
+#define E1000_ADV_TUCMD_MKRREQ	0x10 /* Indicates markers are required */
+#define E1000_ADV_DCMD_EOP	0x1  /* End of Packet */
+#define E1000_ADV_DCMD_IFCS	0x2  /* Insert FCS (Ethernet CRC) */
+#define E1000_ADV_DCMD_RS	0x8  /* Report Status */
+#define E1000_ADV_DCMD_VLE	0x40 /* Add VLAN tag */
+#define E1000_ADV_DCMD_TSE	0x80 /* TCP Seg enable */
+/* Extended Device Control */
+#define E1000_CTRL_EXT_NSICR	0x00000001 /* Disable Intr Clear all on read */
+
+struct e1000_adv_context_desc {
+	union {
+		u32 ip_config;
+		struct {
+			u32 iplen:9;
+			u32 maclen:7;
+			u32 vlan_tag:16;
+		} fields;
+	} ip_setup;
+	u32 seq_num;
+	union {
+		u64 l4_config;
+		struct {
+			u32 mkrloc:9;
+			u32 tucmd:11;
+			u32 dtyp:4;
+			u32 adv:8;
+			u32 rsvd:4;
+			u32 idx:4;
+			u32 l4len:8;
+			u32 mss:16;
+		} fields;
+	} l4_setup;
+};
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT		10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK		0x00000F00
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT		2  /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_LEGACY		0x00000000
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF	0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT		0x04000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS	0x0A000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION	0x06000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define E1000_SRRCTL_DESCTYPE_MASK		0x0E000000
+#define E1000_SRRCTL_TIMESTAMP			0x40000000
+#define E1000_SRRCTL_DROP_EN			0x80000000
+
+#define E1000_SRRCTL_BSIZEPKT_MASK		0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK		0x00003F00
+
+#define E1000_TX_HEAD_WB_ENABLE		0x1
+#define E1000_TX_SEQNUM_WB_ENABLE	0x2
+
+#define E1000_MRQC_ENABLE_RSS_4Q		0x00000002
+#define E1000_MRQC_ENABLE_VMDQ			0x00000003
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q		0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP		0x00400000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP		0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX	0x01000000
+#define E1000_MRQC_ENABLE_RSS_8Q		0x00000002
+
+#define E1000_VMRCTL_MIRROR_PORT_SHIFT		8
+#define E1000_VMRCTL_MIRROR_DSTPORT_MASK	(7 << \
+						 E1000_VMRCTL_MIRROR_PORT_SHIFT)
+#define E1000_VMRCTL_POOL_MIRROR_ENABLE		(1 << 0)
+#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE	(1 << 1)
+#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE	(1 << 2)
+
+#define E1000_EICR_TX_QUEUE ( \
+	E1000_EICR_TX_QUEUE0 |    \
+	E1000_EICR_TX_QUEUE1 |    \
+	E1000_EICR_TX_QUEUE2 |    \
+	E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+	E1000_EICR_RX_QUEUE0 |    \
+	E1000_EICR_RX_QUEUE1 |    \
+	E1000_EICR_RX_QUEUE2 |    \
+	E1000_EICR_RX_QUEUE3)
+
+#define E1000_EIMS_RX_QUEUE	E1000_EICR_RX_QUEUE
+#define E1000_EIMS_TX_QUEUE	E1000_EICR_TX_QUEUE
+
+#define EIMS_ENABLE_MASK ( \
+	E1000_EIMS_RX_QUEUE  | \
+	E1000_EIMS_TX_QUEUE  | \
+	E1000_EIMS_TCP_TIMER | \
+	E1000_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIR_PORT_IM_EN	0x00010000  /* TCP port enable */
+#define E1000_IMIR_PORT_BP	0x00020000  /* TCP port check bypass */
+#define E1000_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_URG	0x00002000  /* Check URG bit in header */
+#define E1000_IMIREXT_CTRL_ACK	0x00004000  /* Check ACK bit in header */
+#define E1000_IMIREXT_CTRL_PSH	0x00008000  /* Check PSH bit in header */
+#define E1000_IMIREXT_CTRL_RST	0x00010000  /* Check RST bit in header */
+#define E1000_IMIREXT_CTRL_SYN	0x00020000  /* Check SYN bit in header */
+#define E1000_IMIREXT_CTRL_FIN	0x00040000  /* Check FIN bit in header */
+#define E1000_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /*RSS type, Pkt type*/
+					/* Split Header, header buffer len */
+					__le16 hdr_info;
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+#define E1000_RXDADV_RSSTYPE_MASK	0x0000000F
+#define E1000_RXDADV_RSSTYPE_SHIFT	12
+#define E1000_RXDADV_HDRBUFLEN_MASK	0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT	5
+#define E1000_RXDADV_SPLITHEADER_EN	0x00001000
+#define E1000_RXDADV_SPH		0x8000
+#define E1000_RXDADV_STAT_TS		0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_STAT_TSIP		0x08000 /* timestamp in packet */
+#define E1000_RXDADV_ERR_HBO		0x00800000
+
+/* RSS Hash results */
+#define E1000_RXDADV_RSSTYPE_NONE	0x00000000
+#define E1000_RXDADV_RSSTYPE_IPV4_TCP	0x00000001
+#define E1000_RXDADV_RSSTYPE_IPV4	0x00000002
+#define E1000_RXDADV_RSSTYPE_IPV6_TCP	0x00000003
+#define E1000_RXDADV_RSSTYPE_IPV6_EX	0x00000004
+#define E1000_RXDADV_RSSTYPE_IPV6	0x00000005
+#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define E1000_RXDADV_RSSTYPE_IPV4_UDP	0x00000007
+#define E1000_RXDADV_RSSTYPE_IPV6_UDP	0x00000008
+#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor */
+#define E1000_RXDADV_PKTTYPE_NONE	0x00000000
+#define E1000_RXDADV_PKTTYPE_IPV4	0x00000010 /* IPV4 hdr present */
+#define E1000_RXDADV_PKTTYPE_IPV4_EX	0x00000020 /* IPV4 hdr + extensions */
+#define E1000_RXDADV_PKTTYPE_IPV6	0x00000040 /* IPV6 hdr present */
+#define E1000_RXDADV_PKTTYPE_IPV6_EX	0x00000080 /* IPV6 hdr + extensions */
+#define E1000_RXDADV_PKTTYPE_TCP	0x00000100 /* TCP hdr present */
+#define E1000_RXDADV_PKTTYPE_UDP	0x00000200 /* UDP hdr present */
+#define E1000_RXDADV_PKTTYPE_SCTP	0x00000400 /* SCTP hdr present */
+#define E1000_RXDADV_PKTTYPE_NFS	0x00000800 /* NFS hdr present */
+
+#define E1000_RXDADV_PKTTYPE_IPSEC_ESP	0x00001000 /* IPSec ESP */
+#define E1000_RXDADV_PKTTYPE_IPSEC_AH	0x00002000 /* IPSec AH */
+#define E1000_RXDADV_PKTTYPE_LINKSEC	0x00004000 /* LinkSec Encap */
+#define E1000_RXDADV_PKTTYPE_ETQF	0x00008000 /* PKTTYPE is ETQF index */
+#define E1000_RXDADV_PKTTYPE_ETQF_MASK	0x00000070 /* ETQF has 8 indices */
+#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT	4 /* Right-shift 4 bits */
+
+/* LinkSec results */
+/* Security Processing bit Indication */
+#define E1000_RXDADV_LNKSEC_STATUS_SECP		0x00020000
+#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK	0x18000000
+#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH	0x08000000
+#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR	0x10000000
+#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG	0x18000000
+
+#define E1000_RXDADV_IPSEC_STATUS_SECP			0x00020000
+#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK		0x18000000
+#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL	0x08000000
+#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH		0x10000000
+#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED	0x18000000
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+	struct {
+		__le64 buffer_addr;    /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_DTYP_CTXT	0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA	0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP	0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS	0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DDTYP_ISCSI	0x10000000 /* DDP hdr type or iSCSI */
+#define E1000_ADVTXD_DCMD_DEXT	0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE	0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE	0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_MAC_LINKSEC	0x00040000 /* Apply LinkSec on pkt */
+#define E1000_ADVTXD_MAC_TSTAMP		0x00080000 /* IEEE1588 Timestamp pkt */
+#define E1000_ADVTXD_STAT_SN_CRC	0x00000002 /* NXTSEQ/SEED prsnt in WB */
+#define E1000_ADVTXD_IDX_SHIFT		4  /* Adv desc Index shift */
+#define E1000_ADVTXD_POPTS_ISCO_1ST	0x00000000 /* 1st TSO of iSCSI PDU */
+#define E1000_ADVTXD_POPTS_ISCO_MDL	0x00000800 /* Middle TSO of iSCSI PDU */
+#define E1000_ADVTXD_POPTS_ISCO_LAST	0x00001000 /* Last TSO of iSCSI PDU */
+/* 1st & Last TSO-full iSCSI PDU*/
+#define E1000_ADVTXD_POPTS_ISCO_FULL	0x00001800
+#define E1000_ADVTXD_POPTS_IPSEC	0x00000400 /* IPSec offload request */
+#define E1000_ADVTXD_PAYLEN_SHIFT	14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT	9  /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_VLAN_SHIFT		16  /* Adv ctxt vlan tag shift */
+#define E1000_ADVTXD_TUCMD_IPV4		0x00000400  /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_IPV6		0x00000000  /* IP Packet Type: 0=IPv6 */
+#define E1000_ADVTXD_TUCMD_L4T_UDP	0x00000000  /* L4 Packet TYPE of UDP */
+#define E1000_ADVTXD_TUCMD_L4T_TCP	0x00000800  /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP	0x00001000  /* L4 Packet TYPE of SCTP */
+#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP	0x00002000 /* IPSec Type ESP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN	0x00004000
+/* Req requires Markers and CRC */
+#define E1000_ADVTXD_TUCMD_MKRREQ	0x00002000
+#define E1000_ADVTXD_L4LEN_SHIFT	8  /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT		16  /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK	0x000000FF
+/* Adv ctxt IPSec ESP len mask */
+#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK		0x000000FF
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Tx Queue */
+#define E1000_TXDCTL_SWFLSH		0x04000000 /* Tx Desc. wbk flushing */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+#define E1000_TXDCTL_PRIORITY		0x08000000
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Rx Queue */
+#define E1000_RXDCTL_SWFLSH		0x04000000 /* Rx Desc. wbk flushing */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_CTRL_DCA_ENABLE	0x00000000 /* DCA Enable */
+#define E1000_DCA_CTRL_DCA_DISABLE	0x00000001 /* DCA Disable */
+
+#define E1000_DCA_CTRL_DCA_MODE_CB1	0x00 /* DCA Mode CB1 */
+#define E1000_DCA_CTRL_DCA_MODE_CB2	0x02 /* DCA Mode CB2 */
+
+#define E1000_DCA_RXCTRL_CPUID_MASK	0x0000001F /* Rx CPUID Mask */
+#define E1000_DCA_RXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Rx Desc enable */
+#define E1000_DCA_RXCTRL_HEAD_DCA_EN	(1 << 6) /* DCA Rx Desc header ena */
+#define E1000_DCA_RXCTRL_DATA_DCA_EN	(1 << 7) /* DCA Rx Desc payload ena */
+#define E1000_DCA_RXCTRL_DESC_RRO_EN	(1 << 9) /* DCA Rx Desc Relax Order */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK	0x0000001F /* Tx CPUID Mask */
+#define E1000_DCA_TXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_DESC_RRO_EN	(1 << 9) /* Tx rd Desc Relax Order */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN	(1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_DATA_RRO_EN	(1 << 13) /* Tx rd data Relax Order */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK_82576	0xFF000000 /* Tx CPUID Mask */
+#define E1000_DCA_RXCTRL_CPUID_MASK_82576	0xFF000000 /* Rx CPUID Mask */
+#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576	24 /* Tx CPUID */
+#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576	24 /* Rx CPUID */
+
+/* Additional interrupt register bit definitions */
+#define E1000_ICR_LSECPNS	0x00000020 /* PN threshold - server */
+#define E1000_IMS_LSECPNS	E1000_ICR_LSECPNS /* PN threshold - server */
+#define E1000_ICS_LSECPNS	E1000_ICR_LSECPNS /* PN threshold - server */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE	(1 << 26)
+#define E1000_ETQF_IMM_INT		(1 << 29)
+#define E1000_ETQF_1588			(1 << 30)
+#define E1000_ETQF_QUEUE_ENABLE		(1 << 31)
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ *                   to avoid filter collisions later. Add new filters
+ *                   here!!
+ *
+ * Current filters:
+ *    EAPOL 802.1x (0x888e): Filter 0
+ */
+#define E1000_ETQF_FILTER_EAPOL		0
+
+#define E1000_FTQF_VF_BP		0x00008000
+#define E1000_FTQF_1588_TIME_STAMP	0x08000000
+#define E1000_FTQF_MASK			0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP	0x10000000
+#define E1000_FTQF_MASK_SOURCE_ADDR_BP	0x20000000
+#define E1000_FTQF_MASK_DEST_ADDR_BP	0x40000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP	0x80000000
+
+#define E1000_NVM_APME_82575		0x0400
+#define MAX_NUM_VFS			7
+
+#define E1000_DTXSWC_MAC_SPOOF_MASK	0x000000FF /* Per VF MAC spoof cntrl */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK	0x0000FF00 /* Per VF VLAN spoof cntrl */
+#define E1000_DTXSWC_LLE_MASK		0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT	8
+#define E1000_DTXSWC_LLE_SHIFT		16
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN	(1 << 31)  /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT	7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK	(0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC		(1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL	(1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN		(1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK	0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE		0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE	0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE	0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE	0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE	0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM		0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME	0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
+#define E1000_VMOLR_STRCRC	0x80000000 /* CRC stripping enable */
+
+#define E1000_VMOLR_VPE		0x00800000 /* VLAN promiscuous enable */
+#define E1000_VMOLR_UPE		0x20000000 /* Unicast promisuous enable */
+#define E1000_DVMOLR_HIDVLAN	0x20000000 /* Vlan hiding enable */
+#define E1000_DVMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
+#define E1000_DVMOLR_STRCRC	0x80000000 /* CRC stripping enable */
+
+#define E1000_PBRWAC_WALPB	0x00000007 /* Wrap around event on LAN Rx PB */
+#define E1000_PBRWAC_PBE	0x00000008 /* Rx packet buffer empty */
+
+#define E1000_VLVF_ARRAY_SIZE		32
+#define E1000_VLVF_VLANID_MASK		0x00000FFF
+#define E1000_VLVF_POOLSEL_SHIFT	12
+#define E1000_VLVF_POOLSEL_MASK		(0xFF << E1000_VLVF_POOLSEL_SHIFT)
+#define E1000_VLVF_LVLAN		0x00100000
+#define E1000_VLVF_VLANID_ENABLE	0x80000000
+
+#define E1000_VMVIR_VLANA_DEFAULT	0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER		0x80000000 /* Never insert VLAN tag */
+
+#define E1000_VF_INIT_TIMEOUT	200 /* Number of retries to clear RSTI */
+
+#define E1000_IOVCTL		0x05BBC
+#define E1000_IOVCTL_REUSE_VFQ	0x00000001
+
+#define E1000_RPLOLR_STRVLAN	0x40000000
+#define E1000_RPLOLR_STRCRC	0x80000000
+
+#define E1000_TCTL_EXT_COLD	0x000FFC00
+#define E1000_TCTL_EXT_COLD_SHIFT	10
+
+#define E1000_DTXCTL_8023LL	0x0004
+#define E1000_DTXCTL_VLAN_ADDED	0x0008
+#define E1000_DTXCTL_OOS_ENABLE	0x0010
+#define E1000_DTXCTL_MDP_EN	0x0020
+#define E1000_DTXCTL_SPOOF_INT	0x0040
+
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT	(1 << 14)
+
+#define ALL_QUEUES		0xFFFF
+
+/* Rx packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576	0x0000007F
+void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable);
+void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf);
+void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable);
+s32 e1000_init_nvm_params_82575(struct e1000_hw *hw);
+
+u16 e1000_rxpbs_adjust_82580(u32 data);
+s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_set_eee_i350(struct e1000_hw *);
+s32 e1000_set_eee_i354(struct e1000_hw *);
+s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *);
+#define E1000_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define E1000_EMC_INTERNAL_DATA		0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT	0x20
+#define E1000_EMC_DIODE1_DATA		0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT	0x19
+#define E1000_EMC_DIODE2_DATA		0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT	0x1A
+#define E1000_EMC_DIODE3_DATA		0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT	0x30
+
+s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw);
+s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw);
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define E1000_I2C_T_HD_STA	4
+#define E1000_I2C_T_LOW		5
+#define E1000_I2C_T_HIGH	4
+#define E1000_I2C_T_SU_STA	5
+#define E1000_I2C_T_HD_DATA	5
+#define E1000_I2C_T_SU_DATA	1
+#define E1000_I2C_T_RISE	1
+#define E1000_I2C_T_FALL	1
+#define E1000_I2C_T_SU_STO	4
+#define E1000_I2C_T_BUF		5
+
+s32 e1000_set_i2c_bb(struct e1000_hw *hw);
+s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data);
+s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data);
+void e1000_i2c_bus_clear(struct e1000_hw *hw);
+#endif /* _E1000_82575_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.c b/kernel/linux/kni/ethtool/igb/e1000_api.c
new file mode 100644
index 0000000..3e54e50
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_api.c
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+/**
+ *  e1000_init_mac_params - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the MAC
+ *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
+ **/
+s32 e1000_init_mac_params(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	if (hw->mac.ops.init_params) {
+		ret_val = hw->mac.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("MAC Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("mac.init_mac_params was NULL\n");
+		ret_val = -E1000_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the NVM
+ *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
+ **/
+s32 e1000_init_nvm_params(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	if (hw->nvm.ops.init_params) {
+		ret_val = hw->nvm.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("NVM Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("nvm.init_nvm_params was NULL\n");
+		ret_val = -E1000_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_phy_params - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the PHY
+ *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
+ **/
+s32 e1000_init_phy_params(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	if (hw->phy.ops.init_params) {
+		ret_val = hw->phy.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("PHY Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("phy.init_phy_params was NULL\n");
+		ret_val =  -E1000_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_mbx_params - Initialize mailbox function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the PHY
+ *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
+ **/
+s32 e1000_init_mbx_params(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	if (hw->mbx.ops.init_params) {
+		ret_val = hw->mbx.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("Mailbox Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("mbx.init_mbx_params was NULL\n");
+		ret_val =  -E1000_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_set_mac_type - Sets MAC type
+ *  @hw: pointer to the HW structure
+ *
+ *  This function sets the mac type of the adapter based on the
+ *  device ID stored in the hw structure.
+ *  MUST BE FIRST FUNCTION CALLED (explicitly or through
+ *  e1000_setup_init_funcs()).
+ **/
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_set_mac_type");
+
+	switch (hw->device_id) {
+	case E1000_DEV_ID_82575EB_COPPER:
+	case E1000_DEV_ID_82575EB_FIBER_SERDES:
+	case E1000_DEV_ID_82575GB_QUAD_COPPER:
+		mac->type = e1000_82575;
+		break;
+	case E1000_DEV_ID_82576:
+	case E1000_DEV_ID_82576_FIBER:
+	case E1000_DEV_ID_82576_SERDES:
+	case E1000_DEV_ID_82576_QUAD_COPPER:
+	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+	case E1000_DEV_ID_82576_NS:
+	case E1000_DEV_ID_82576_NS_SERDES:
+	case E1000_DEV_ID_82576_SERDES_QUAD:
+		mac->type = e1000_82576;
+		break;
+	case E1000_DEV_ID_82580_COPPER:
+	case E1000_DEV_ID_82580_FIBER:
+	case E1000_DEV_ID_82580_SERDES:
+	case E1000_DEV_ID_82580_SGMII:
+	case E1000_DEV_ID_82580_COPPER_DUAL:
+	case E1000_DEV_ID_82580_QUAD_FIBER:
+	case E1000_DEV_ID_DH89XXCC_SGMII:
+	case E1000_DEV_ID_DH89XXCC_SERDES:
+	case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+	case E1000_DEV_ID_DH89XXCC_SFP:
+		mac->type = e1000_82580;
+		break;
+	case E1000_DEV_ID_I350_COPPER:
+	case E1000_DEV_ID_I350_FIBER:
+	case E1000_DEV_ID_I350_SERDES:
+	case E1000_DEV_ID_I350_SGMII:
+	case E1000_DEV_ID_I350_DA4:
+		mac->type = e1000_i350;
+		break;
+	case E1000_DEV_ID_I210_COPPER_FLASHLESS:
+	case E1000_DEV_ID_I210_SERDES_FLASHLESS:
+	case E1000_DEV_ID_I210_COPPER:
+	case E1000_DEV_ID_I210_COPPER_OEM1:
+	case E1000_DEV_ID_I210_COPPER_IT:
+	case E1000_DEV_ID_I210_FIBER:
+	case E1000_DEV_ID_I210_SERDES:
+	case E1000_DEV_ID_I210_SGMII:
+		mac->type = e1000_i210;
+		break;
+	case E1000_DEV_ID_I211_COPPER:
+		mac->type = e1000_i211;
+		break;
+
+	case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
+	case E1000_DEV_ID_I354_SGMII:
+	case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
+		mac->type = e1000_i354;
+		break;
+	default:
+		/* Should never have loaded on this device */
+		ret_val = -E1000_ERR_MAC_INIT;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_setup_init_funcs - Initializes function pointers
+ *  @hw: pointer to the HW structure
+ *  @init_device: true will initialize the rest of the function pointers
+ *		  getting the device ready for use.  false will only set
+ *		  MAC type and the function pointers for the other init
+ *		  functions.  Passing false will not generate any hardware
+ *		  reads or writes.
+ *
+ *  This function must be called by a driver in order to use the rest
+ *  of the 'shared' code files. Called by drivers only.
+ **/
+s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device)
+{
+	s32 ret_val;
+
+	/* Can't do much good without knowing the MAC type. */
+	ret_val = e1000_set_mac_type(hw);
+	if (ret_val) {
+		DEBUGOUT("ERROR: MAC type could not be set properly.\n");
+		goto out;
+	}
+
+	if (!hw->hw_addr) {
+		DEBUGOUT("ERROR: Registers not mapped\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Init function pointers to generic implementations. We do this first
+	 * allowing a driver module to override it afterward.
+	 */
+	e1000_init_mac_ops_generic(hw);
+	e1000_init_phy_ops_generic(hw);
+	e1000_init_nvm_ops_generic(hw);
+	e1000_init_mbx_ops_generic(hw);
+
+	/*
+	 * Set up the init function pointers. These are functions within the
+	 * adapter family file that sets up function pointers for the rest of
+	 * the functions in that family.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82575:
+	case e1000_82576:
+	case e1000_82580:
+	case e1000_i350:
+	case e1000_i354:
+		e1000_init_function_pointers_82575(hw);
+		break;
+	case e1000_i210:
+	case e1000_i211:
+		e1000_init_function_pointers_i210(hw);
+		break;
+	default:
+		DEBUGOUT("Hardware not supported\n");
+		ret_val = -E1000_ERR_CONFIG;
+		break;
+	}
+
+	/*
+	 * Initialize the rest of the function pointers. These require some
+	 * register reads/writes in some cases.
+	 */
+	if (!(ret_val) && init_device) {
+		ret_val = e1000_init_mac_params(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = e1000_init_nvm_params(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = e1000_init_phy_params(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = e1000_init_mbx_params(hw);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_bus_info - Obtain bus information for adapter
+ *  @hw: pointer to the HW structure
+ *
+ *  This will obtain information about the HW bus for which the
+ *  adapter is attached and stores it in the hw structure. This is a
+ *  function pointer entry point called by drivers.
+ **/
+s32 e1000_get_bus_info(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.get_bus_info)
+		return hw->mac.ops.get_bus_info(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  This clears the VLAN filter table on the adapter. This is a function
+ *  pointer entry point called by drivers.
+ **/
+void e1000_clear_vfta(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.clear_vfta)
+		hw->mac.ops.clear_vfta(hw);
+}
+
+/**
+ *  e1000_write_vfta - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: the 32-bit offset in which to write the value to.
+ *  @value: the 32-bit value to write at location offset.
+ *
+ *  This writes a 32-bit value to a 32-bit offset in the VLAN filter
+ *  table. This is a function pointer entry point called by drivers.
+ **/
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	if (hw->mac.ops.write_vfta)
+		hw->mac.ops.write_vfta(hw, offset, value);
+}
+
+/**
+ *  e1000_update_mc_addr_list - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates the Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
+			       u32 mc_addr_count)
+{
+	if (hw->mac.ops.update_mc_addr_list)
+		hw->mac.ops.update_mc_addr_list(hw, mc_addr_list,
+						mc_addr_count);
+}
+
+/**
+ *  e1000_force_mac_fc - Force MAC flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings. Currently no func pointer exists
+ *  and all implementations are handled in the generic version of this
+ *  function.
+ **/
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+	return e1000_force_mac_fc_generic(hw);
+}
+
+/**
+ *  e1000_check_for_link - Check/Store link connection
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks the link condition of the adapter and stores the
+ *  results in the hw->mac structure. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.check_for_link)
+		return hw->mac.ops.check_for_link(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_check_mng_mode - Check management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has manageability enabled.
+ *  This is a function pointer entry point called by drivers.
+ **/
+bool e1000_check_mng_mode(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.check_mng_mode)
+		return hw->mac.ops.check_mng_mode(hw);
+
+	return false;
+}
+
+/**
+ *  e1000_mng_write_dhcp_info - Writes DHCP info to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface
+ *  @length: size of the buffer
+ *
+ *  Writes the DHCP information to the host interface.
+ **/
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+	return e1000_mng_write_dhcp_info_generic(hw, buffer, length);
+}
+
+/**
+ *  e1000_reset_hw - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.reset_hw)
+		return hw->mac.ops.reset_hw(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_init_hw - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation. This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.init_hw)
+		return hw->mac.ops.init_hw(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_setup_link - Configures link and flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  This configures link and flow control settings for the adapter. This
+ *  is a function pointer entry point called by drivers. While modules can
+ *  also call this, they probably call their own version of this function.
+ **/
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.setup_link)
+		return hw->mac.ops.setup_link(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_get_speed_and_duplex - Returns current speed and duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: pointer to a 16-bit value to store the speed
+ *  @duplex: pointer to a 16-bit value to store the duplex.
+ *
+ *  This returns the speed and duplex of the adapter in the two 'out'
+ *  variables passed in. This is a function pointer entry point called
+ *  by drivers.
+ **/
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+	if (hw->mac.ops.get_link_up_info)
+		return hw->mac.ops.get_link_up_info(hw, speed, duplex);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_setup_led - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.setup_led)
+		return hw->mac.ops.setup_led(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_cleanup_led - Restores SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This restores the SW controllable LED to the value saved off by
+ *  e1000_setup_led. This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.cleanup_led)
+		return hw->mac.ops.cleanup_led(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_blink_led - Blink SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This starts the adapter LED blinking. Request the LED to be setup first
+ *  and cleaned up after. This is a function pointer entry point called by
+ *  drivers.
+ **/
+s32 e1000_blink_led(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.blink_led)
+		return hw->mac.ops.blink_led(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_id_led_init - store LED configurations in SW
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the LED config in SW. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.id_led_init)
+		return hw->mac.ops.id_led_init(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_led_on - Turn on SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Turns the SW defined LED on. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.led_on)
+		return hw->mac.ops.led_on(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_led_off - Turn off SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Turns the SW defined LED off. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.led_off)
+		return hw->mac.ops.led_off(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_reset_adaptive - Reset adaptive IFS
+ *  @hw: pointer to the HW structure
+ *
+ *  Resets the adaptive IFS. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+	e1000_reset_adaptive_generic(hw);
+}
+
+/**
+ *  e1000_update_adaptive - Update adaptive IFS
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates adapter IFS. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+	e1000_update_adaptive_generic(hw);
+}
+
+/**
+ *  e1000_disable_pcie_master - Disable PCI-Express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. Currently no func pointer exists and all implementations are
+ *  handled in the generic version of this function.
+ **/
+s32 e1000_disable_pcie_master(struct e1000_hw *hw)
+{
+	return e1000_disable_pcie_master_generic(hw);
+}
+
+/**
+ *  e1000_config_collision_dist - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.config_collision_dist)
+		hw->mac.ops.config_collision_dist(hw);
+}
+
+/**
+ *  e1000_rar_set - Sets a receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: address to set the RAR to
+ *  @index: the RAR to set
+ *
+ *  Sets a Receive Address Register (RAR) to the specified address.
+ **/
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	if (hw->mac.ops.rar_set)
+		hw->mac.ops.rar_set(hw, addr, index);
+}
+
+/**
+ *  e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state
+ *  @hw: pointer to the HW structure
+ *
+ *  Ensures that the MDI/MDIX SW state is valid.
+ **/
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.validate_mdi_setting)
+		return hw->mac.ops.validate_mdi_setting(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_hash_mc_addr - Determines address location in multicast table
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: Multicast address to hash.
+ *
+ *  This hashes an address to determine its location in the multicast
+ *  table. Currently no func pointer exists and all implementations
+ *  are handled in the generic version of this function.
+ **/
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+	return e1000_hash_mc_addr_generic(hw, mc_addr);
+}
+
+/**
+ *  e1000_enable_tx_pkt_filtering - Enable packet filtering on TX
+ *  @hw: pointer to the HW structure
+ *
+ *  Enables packet filtering on transmit packets if manageability is enabled
+ *  and host interface is enabled.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+	return e1000_enable_tx_pkt_filtering_generic(hw);
+}
+
+/**
+ *  e1000_mng_host_if_write - Writes to the manageability host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface buffer
+ *  @length: size of the buffer
+ *  @offset: location in the buffer to write to
+ *  @sum: sum of the data (not checksum)
+ *
+ *  This function writes the buffer content at the offset given on the host if.
+ *  It also does alignment considerations to do the writes in most efficient
+ *  way.  Also fills up the sum of the buffer in *buffer parameter.
+ **/
+s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+			    u16 offset, u8 *sum)
+{
+	return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum);
+}
+
+/**
+ *  e1000_mng_write_cmd_header - Writes manageability command header
+ *  @hw: pointer to the HW structure
+ *  @hdr: pointer to the host interface command header
+ *
+ *  Writes the command header after does the checksum calculation.
+ **/
+s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+			       struct e1000_host_mng_command_header *hdr)
+{
+	return e1000_mng_write_cmd_header_generic(hw, hdr);
+}
+
+/**
+ *  e1000_mng_enable_host_if - Checks host interface is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
+ *
+ *  This function checks whether the HOST IF is enabled for command operation
+ *  and also checks whether the previous command is completed.  It busy waits
+ *  in case of previous command is not completed.
+ **/
+s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+	return e1000_mng_enable_host_if_generic(hw);
+}
+
+/**
+ *  e1000_check_reset_block - Verifies PHY can be reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks if the PHY is in a state that can be reset or if manageability
+ *  has it tied up. This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_check_reset_block(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.check_reset_block)
+		return hw->phy.ops.check_reset_block(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_phy_reg - Reads PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to read
+ *  @data: the buffer to store the 16-bit read.
+ *
+ *  Reads the PHY register and returns the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	if (hw->phy.ops.read_reg)
+		return hw->phy.ops.read_reg(hw, offset, data);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_phy_reg - Writes PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes the PHY register at offset with the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	if (hw->phy.ops.write_reg)
+		return hw->phy.ops.write_reg(hw, offset, data);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_release_phy - Generic release PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Return if silicon family does not require a semaphore when accessing the
+ *  PHY.
+ **/
+void e1000_release_phy(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.release)
+		hw->phy.ops.release(hw);
+}
+
+/**
+ *  e1000_acquire_phy - Generic acquire PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Return success if silicon family does not require a semaphore when
+ *  accessing the PHY.
+ **/
+s32 e1000_acquire_phy(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.acquire)
+		return hw->phy.ops.acquire(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_kmrn_reg - Reads register using Kumeran interface
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to read
+ *  @data: the location to store the 16-bit value read.
+ *
+ *  Reads a register out of the Kumeran interface. Currently no func pointer
+ *  exists and all implementations are handled in the generic version of
+ *  this function.
+ **/
+s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return e1000_read_kmrn_reg_generic(hw, offset, data);
+}
+
+/**
+ *  e1000_write_kmrn_reg - Writes register using Kumeran interface
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes a register to the Kumeran interface. Currently no func pointer
+ *  exists and all implementations are handled in the generic version of
+ *  this function.
+ **/
+s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return e1000_write_kmrn_reg_generic(hw, offset, data);
+}
+
+/**
+ *  e1000_get_cable_length - Retrieves cable length estimation
+ *  @hw: pointer to the HW structure
+ *
+ *  This function estimates the cable length and stores them in
+ *  hw->phy.min_length and hw->phy.max_length. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 e1000_get_cable_length(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.get_cable_length)
+		return hw->phy.ops.get_cable_length(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_phy_info - Retrieves PHY information from registers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function gets some information from various PHY registers and
+ *  populates hw->phy values with it. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 e1000_get_phy_info(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.get_info)
+		return hw->phy.ops.get_info(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_hw_reset - Hard PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs a hard PHY reset. This is a function pointer entry point called
+ *  by drivers.
+ **/
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.reset)
+		return hw->phy.ops.reset(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_commit - Soft PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs a soft PHY reset on those that apply. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 e1000_phy_commit(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.commit)
+		return hw->phy.ops.commit(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_set_d0_lplu_state - Sets low power link up state for D0
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D0
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D0
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.  This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
+{
+	if (hw->phy.ops.set_d0_lplu_state)
+		return hw->phy.ops.set_d0_lplu_state(hw, active);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_set_d3_lplu_state - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.  This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+	if (hw->phy.ops.set_d3_lplu_state)
+		return hw->phy.ops.set_d3_lplu_state(hw, active);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_mac_addr - Reads MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MAC address out of the adapter and stores it in the HW structure.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.read_mac_addr)
+		return hw->mac.ops.read_mac_addr(hw);
+
+	return e1000_read_mac_addr_generic(hw);
+}
+
+/**
+ *  e1000_read_pba_string - Read device part number string
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size)
+{
+	return e1000_read_pba_string_generic(hw, pba_num, pba_num_size);
+}
+
+/**
+ *  e1000_read_pba_length - Read device part number string length
+ *  @hw: pointer to the HW structure
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number length from the EEPROM and
+ *  stores the value in pba_num.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size)
+{
+	return e1000_read_pba_length_generic(hw, pba_num_size);
+}
+
+/**
+ *  e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Validates the NVM checksum is correct. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
+{
+	if (hw->nvm.ops.validate)
+		return hw->nvm.ops.validate(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the NVM checksum. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+s32 e1000_update_nvm_checksum(struct e1000_hw *hw)
+{
+	if (hw->nvm.ops.update)
+		return hw->nvm.ops.update(hw);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_reload_nvm - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+void e1000_reload_nvm(struct e1000_hw *hw)
+{
+	if (hw->nvm.ops.reload)
+		hw->nvm.ops.reload(hw);
+}
+
+/**
+ *  e1000_read_nvm - Reads NVM (EEPROM)
+ *  @hw: pointer to the HW structure
+ *  @offset: the word offset to read
+ *  @words: number of 16-bit words to read
+ *  @data: pointer to the properly sized buffer for the data.
+ *
+ *  Reads 16-bit chunks of data from the NVM (EEPROM). This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	if (hw->nvm.ops.read)
+		return hw->nvm.ops.read(hw, offset, words, data);
+
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_write_nvm - Writes to NVM (EEPROM)
+ *  @hw: pointer to the HW structure
+ *  @offset: the word offset to read
+ *  @words: number of 16-bit words to write
+ *  @data: pointer to the properly sized buffer for the data.
+ *
+ *  Writes 16-bit chunks of data to the NVM (EEPROM). This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	if (hw->nvm.ops.write)
+		return hw->nvm.ops.write(hw, offset, words, data);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_8bit_ctrl_reg - Writes 8bit Control register
+ *  @hw: pointer to the HW structure
+ *  @reg: 32bit register offset
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes the PHY register at offset with the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset,
+			      u8 data)
+{
+	return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data);
+}
+
+/**
+ * e1000_power_up_phy - Restores link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * The phy may be powered down to save power, to turn off link when the
+ * driver is unloaded, or wake on lan is not enabled (among others).
+ **/
+void e1000_power_up_phy(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.power_up)
+		hw->phy.ops.power_up(hw);
+
+	e1000_setup_link(hw);
+}
+
+/**
+ * e1000_power_down_phy - Power down PHY
+ * @hw: pointer to the HW structure
+ *
+ * The phy may be powered down to save power, to turn off link when the
+ * driver is unloaded, or wake on lan is not enabled (among others).
+ **/
+void e1000_power_down_phy(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.power_down)
+		hw->phy.ops.power_down(hw);
+}
+
+/**
+ *  e1000_power_up_fiber_serdes_link - Power up serdes link
+ *  @hw: pointer to the HW structure
+ *
+ *  Power on the optics and PCS.
+ **/
+void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.power_up_serdes)
+		hw->mac.ops.power_up_serdes(hw);
+}
+
+/**
+ *  e1000_shutdown_fiber_serdes_link - Remove link during power down
+ *  @hw: pointer to the HW structure
+ *
+ *  Shutdown the optics and PCS on driver unload.
+ **/
+void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.shutdown_serdes)
+		hw->mac.ops.shutdown_serdes(hw);
+}
+
+/**
+ *  e1000_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.get_thermal_sensor_data)
+		return hw->mac.ops.get_thermal_sensor_data(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_init_thermal_sensor_thresh - Sets thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the thermal sensor thresholds according to the NVM map
+ **/
+s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.init_thermal_sensor_thresh)
+		return hw->mac.ops.init_thermal_sensor_thresh(hw);
+
+	return E1000_SUCCESS;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.h b/kernel/linux/kni/ethtool/igb/e1000_api.h
new file mode 100644
index 0000000..0bc00ac
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_api.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_API_H_
+#define _E1000_API_H_
+
+#include "e1000_hw.h"
+
+extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw);
+extern void e1000_init_function_pointers_vf(struct e1000_hw *hw);
+extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw);
+extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw);
+extern void e1000_init_function_pointers_i210(struct e1000_hw *hw);
+
+s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device);
+s32 e1000_init_mac_params(struct e1000_hw *hw);
+s32 e1000_init_nvm_params(struct e1000_hw *hw);
+s32 e1000_init_phy_params(struct e1000_hw *hw);
+s32 e1000_init_mbx_params(struct e1000_hw *hw);
+s32 e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_clear_vfta(struct e1000_hw *hw);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_disable_pcie_master(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
+void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
+			       u32 mc_addr_count);
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_check_reset_block(struct e1000_hw *hw);
+s32 e1000_blink_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_id_led_init(struct e1000_hw *hw);
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+s32 e1000_get_cable_length(struct e1000_hw *hw);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset,
+			      u8 data);
+s32 e1000_get_phy_info(struct e1000_hw *hw);
+void e1000_release_phy(struct e1000_hw *hw);
+s32 e1000_acquire_phy(struct e1000_hw *hw);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_commit(struct e1000_hw *hw);
+void e1000_power_up_phy(struct e1000_hw *hw);
+void e1000_power_down_phy(struct e1000_hw *hw);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
+s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size);
+s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size);
+void e1000_reload_nvm(struct e1000_hw *hw);
+s32 e1000_update_nvm_checksum(struct e1000_hw *hw);
+s32 e1000_validate_nvm_checksum(struct e1000_hw *hw);
+s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+			    u16 offset, u8 *sum);
+s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+			       struct e1000_host_mng_command_header *hdr);
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw);
+s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw);
+
+
+
+/*
+ * TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ *      adapter = a pointer to struct e1000_hw
+ *      status = the 8 bit status field of the Rx descriptor with EOP set
+ *      error = the 8 bit error field of the Rx descriptor with EOP set
+ *      length = the sum of all the length fields of the Rx descriptors that
+ *               make up the current frame
+ *      last_byte = the last byte of the frame DMAed by the hardware
+ *      max_frame_length = the maximum frame length we want to accept.
+ *      min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ *  ...
+ *  if (TBI_ACCEPT) {
+ *      accept_frame = true;
+ *      e1000_tbi_adjust_stats(adapter, MacAddress);
+ *      frame_length--;
+ *  } else {
+ *      accept_frame = false;
+ *  }
+ *  ...
+ */
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION   0x0F
+
+#define TBI_ACCEPT(a, status, errors, length, last_byte, \
+		   min_frame_size, max_frame_size) \
+	(e1000_tbi_sbp_enabled_82543(a) && \
+	 (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+	 ((last_byte) == CARRIER_EXTENSION) && \
+	 (((status) & E1000_RXD_STAT_VP) ? \
+	  (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \
+	  ((length) <= (max_frame_size + 1))) : \
+	  (((length) > min_frame_size) && \
+	  ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+#ifndef E1000_MAX
+#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b))
+#endif
+#ifndef E1000_DIVIDE_ROUND_UP
+#define E1000_DIVIDE_ROUND_UP(a, b)	(((a) + (b) - 1) / (b)) /* ceil(a/b) */
+#endif
+#endif /* _E1000_API_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_defines.h b/kernel/linux/kni/ethtool/igb/e1000_defines.h
new file mode 100644
index 0000000..b39aaf8
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_defines.h
@@ -0,0 +1,1365 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define REQ_RX_DESCRIPTOR_MULTIPLE  8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME		0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN	0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS	0x00000004 /* PME Status */
+#define E1000_WUC_APMPME	0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_PHY_WAKE	0x00000100 /* if PHY supports wakeup */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC	0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG	0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX	0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC	0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC	0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP	0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4	0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_FLX0		0x00010000 /* Flexible Filter 0 Enable */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC		E1000_WUFC_LNKC
+#define E1000_WUS_MAG		E1000_WUFC_MAG
+#define E1000_WUS_EX		E1000_WUFC_EX
+#define E1000_WUS_MC		E1000_WUFC_MC
+#define E1000_WUS_BC		E1000_WUFC_BC
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP4_DATA	0x00000010 /* SW Definable Pin 4 data */
+#define E1000_CTRL_EXT_SDP6_DATA	0x00000040 /* SW Definable Pin 6 data */
+#define E1000_CTRL_EXT_SDP3_DATA	0x00000080 /* SW Definable Pin 3 data */
+#define E1000_CTRL_EXT_SDP6_DIR	0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP3_DIR	0x00000800 /* Direction of SDP3 0=in 1=out */
+#define E1000_CTRL_EXT_EE_RST	0x00002000 /* Reinitialize from EEPROM */
+/* Physical Func Reset Done Indication */
+#define E1000_CTRL_EXT_PFRSTD	0x00004000
+#define E1000_CTRL_EXT_SPD_BYPS	0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS	0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN	0x00080000 /* DMA Dynamic Clk Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK	0x00C00000
+/* Offset of the link mode field in Ctrl Ext register */
+#define E1000_CTRL_EXT_LINK_MODE_OFFSET	22
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX	0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_GMII	0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES	0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII	0x00800000
+#define E1000_CTRL_EXT_EIAME		0x01000000
+#define E1000_CTRL_EXT_IRCA		0x00000001
+#define E1000_CTRL_EXT_DRV_LOAD		0x10000000 /* Drv loaded bit for FW */
+#define E1000_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */
+#define E1000_CTRL_EXT_PBA_CLR		0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT	16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT	24
+#define E1000_I2CCMD_OPCODE_READ	0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE	0x00000000
+#define E1000_I2CCMD_READY		0x20000000
+#define E1000_I2CCMD_ERROR		0x80000000
+#define E1000_I2CCMD_SFP_DATA_ADDR(a)	(0x0000 + (a))
+#define E1000_I2CCMD_SFP_DIAG_ADDR(a)	(0x0100 + (a))
+#define E1000_MAX_SGMII_PHY_REG_ADDR	255
+#define E1000_I2CCMD_PHY_TIMEOUT	200
+#define E1000_IVAR_VALID	0x80
+#define E1000_GPIE_NSICR	0x00000001
+#define E1000_GPIE_MSIX_MODE	0x00000010
+#define E1000_GPIE_EIAME	0x40000000
+#define E1000_GPIE_PBA		0x80000000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD	0x01    /* Descriptor Done */
+#define E1000_RXD_STAT_EOP	0x02    /* End of Packet */
+#define E1000_RXD_STAT_IXSM	0x04    /* Ignore checksum */
+#define E1000_RXD_STAT_VP	0x08    /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS	0x10    /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS	0x20    /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS	0x40    /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF	0x80    /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV	0x200   /* IP identification valid */
+#define E1000_RXD_STAT_UDPV	0x400   /* Valid UDP checksum */
+#define E1000_RXD_STAT_DYNINT	0x800   /* Pkt caused INT via DYNINT */
+#define E1000_RXD_ERR_CE	0x01    /* CRC Error */
+#define E1000_RXD_ERR_SE	0x02    /* Symbol Error */
+#define E1000_RXD_ERR_SEQ	0x04    /* Sequence Error */
+#define E1000_RXD_ERR_CXE	0x10    /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE	0x20    /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE	0x40    /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE	0x80    /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK	0x0FFF  /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_TST	0x00000100 /* Time Stamp taken */
+#define E1000_RXDEXT_STATERR_LB		0x00040000
+#define E1000_RXDEXT_STATERR_CE		0x01000000
+#define E1000_RXDEXT_STATERR_SE		0x02000000
+#define E1000_RXDEXT_STATERR_SEQ	0x04000000
+#define E1000_RXDEXT_STATERR_CXE	0x10000000
+#define E1000_RXDEXT_STATERR_TCPE	0x20000000
+#define E1000_RXDEXT_STATERR_IPE	0x40000000
+#define E1000_RXDEXT_STATERR_RXE	0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+	E1000_RXD_ERR_CE  |		\
+	E1000_RXD_ERR_SE  |		\
+	E1000_RXD_ERR_SEQ |		\
+	E1000_RXD_ERR_CXE |		\
+	E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+	E1000_RXDEXT_STATERR_CE  |	\
+	E1000_RXDEXT_STATERR_SE  |	\
+	E1000_RXDEXT_STATERR_SEQ |	\
+	E1000_RXDEXT_STATERR_CXE |	\
+	E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_MASK		0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP		0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4		0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX	0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6		0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP		0x00200000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP		0x00008000
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN	0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN	0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_ARP_EN	0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_RCV_TCO_EN	0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE	0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER	0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST		0x00200000
+
+#define E1000_MANC2H_PORT_623		0x00000020 /* Port 0x26f */
+#define E1000_MANC2H_PORT_664		0x00000040 /* Port 0x298 */
+#define E1000_MDEF_PORT_623		0x00000800 /* Port 0x26f */
+#define E1000_MDEF_PORT_664		0x00000400 /* Port 0x298 */
+
+/* Receive Control */
+#define E1000_RCTL_RST		0x00000001 /* Software reset */
+#define E1000_RCTL_EN		0x00000002 /* enable */
+#define E1000_RCTL_SBP		0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE		0x00000008 /* unicast promisc enable */
+#define E1000_RCTL_MPE		0x00000010 /* multicast promisc enable */
+#define E1000_RCTL_LPE		0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO	0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC	0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR	0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_PS	0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF	0x00000000 /* Rx desc min thresh size */
+#define E1000_RCTL_MO_SHIFT	12 /* multicast offset shift */
+#define E1000_RCTL_MO_3		0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_BAM		0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048	0x00000000 /* Rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024	0x00010000 /* Rx buffer size 1024 */
+#define E1000_RCTL_SZ_512	0x00020000 /* Rx buffer size 512 */
+#define E1000_RCTL_SZ_256	0x00030000 /* Rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384	0x00010000 /* Rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192	0x00020000 /* Rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096	0x00030000 /* Rx buffer size 4096 */
+#define E1000_RCTL_VFE		0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN	0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI		0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF		0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF		0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX		0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC	0x04000000 /* Strip Ethernet CRC */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ *		  E1000_PSRCTL_BSIZE0_MASK) |
+ *		((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ *		  E1000_PSRCTL_BSIZE1_MASK) |
+ *		((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ *		  E1000_PSRCTL_BSIZE2_MASK) |
+ *		((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ *		  E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256],  default=256
+ *       value1 = [1024..64512], default=4096
+ *       value2 = [0..64512],    default=4096
+ *       value3 = [0..64512],    default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK	0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK	0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK	0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK	0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT	7    /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT	2    /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT	6    /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT	14   /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM	0x01
+#define E1000_SWFW_PHY0_SM	0x02
+#define E1000_SWFW_PHY1_SM	0x04
+#define E1000_SWFW_CSR_SM	0x08
+#define E1000_SWFW_PHY2_SM	0x20
+#define E1000_SWFW_PHY3_SM	0x40
+#define E1000_SWFW_SW_MNG_SM	0x400
+
+/* Device Control */
+#define E1000_CTRL_FD		0x00000001  /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_PRIOR	0x00000004  /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
+#define E1000_CTRL_LRST		0x00000008  /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE		0x00000020  /* Auto-speed detect enable */
+#define E1000_CTRL_SLU		0x00000040  /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS		0x00000080  /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL	0x00000300  /* Speed Select Mask */
+#define E1000_CTRL_SPD_10	0x00000000  /* Force 10Mb */
+#define E1000_CTRL_SPD_100	0x00000100  /* Force 100Mb */
+#define E1000_CTRL_SPD_1000	0x00000200  /* Force 1Gb */
+#define E1000_CTRL_FRCSPD	0x00000800  /* Force Speed */
+#define E1000_CTRL_FRCDPX	0x00001000  /* Force Duplex */
+#define E1000_CTRL_SWDPIN0	0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1	0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2	0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_ADVD3WUC	0x00100000 /* D3 WUC */
+#define E1000_CTRL_SWDPIN3	0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0	0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_RST		0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE		0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE		0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME		0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST	0x80000000 /* PHY Reset */
+#define E1000_CTRL_I2C_ENA	0x02000000 /* I2C enable */
+
+
+#define E1000_CONNSW_ENRGSRC		0x4
+#define E1000_CONNSW_PHYSD		0x400
+#define E1000_CONNSW_PHY_PDN		0x800
+#define E1000_CONNSW_SERDESD		0x200
+#define E1000_CONNSW_AUTOSENSE_CONF	0x2
+#define E1000_CONNSW_AUTOSENSE_EN	0x1
+#define E1000_PCS_CFG_PCS_EN		8
+#define E1000_PCS_LCTL_FLV_LINK_UP	1
+#define E1000_PCS_LCTL_FSV_10		0
+#define E1000_PCS_LCTL_FSV_100		2
+#define E1000_PCS_LCTL_FSV_1000		4
+#define E1000_PCS_LCTL_FDV_FULL		8
+#define E1000_PCS_LCTL_FSD		0x10
+#define E1000_PCS_LCTL_FORCE_LINK	0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL	0x80
+#define E1000_PCS_LCTL_AN_ENABLE	0x10000
+#define E1000_PCS_LCTL_AN_RESTART	0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT	0x40000
+#define E1000_ENABLE_SERDES_LOOPBACK	0x0410
+
+#define E1000_PCS_LSTS_LINK_OK		1
+#define E1000_PCS_LSTS_SPEED_100	2
+#define E1000_PCS_LSTS_SPEED_1000	4
+#define E1000_PCS_LSTS_DUPLEX_FULL	8
+#define E1000_PCS_LSTS_SYNK_OK		0x10
+#define E1000_PCS_LSTS_AN_COMPLETE	0x10000
+
+/* Device Status */
+#define E1000_STATUS_FD			0x00000001 /* Duplex 0=half 1=full */
+#define E1000_STATUS_LU			0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK		0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT		2
+#define E1000_STATUS_FUNC_1		0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF		0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_MASK	0x000000C0
+#define E1000_STATUS_SPEED_10		0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100		0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000		0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE	0x00000200 /* Lan Init Compltn by NVM */
+#define E1000_STATUS_PHYRA		0x00000400 /* PHY Reset Asserted */
+#define E1000_STATUS_GIO_MASTER_ENABLE	0x00080000 /* Master request status */
+#define E1000_STATUS_2P5_SKU		0x00001000 /* Val of 2.5GBE SKU strap */
+#define E1000_STATUS_2P5_SKU_OVER	0x00002000 /* Val of 2.5GBE SKU Over */
+
+#define SPEED_10	10
+#define SPEED_100	100
+#define SPEED_1000	1000
+#define SPEED_2500	2500
+#define HALF_DUPLEX	1
+#define FULL_DUPLEX	2
+
+
+#define ADVERTISE_10_HALF		0x0001
+#define ADVERTISE_10_FULL		0x0002
+#define ADVERTISE_100_HALF		0x0004
+#define ADVERTISE_100_FULL		0x0008
+#define ADVERTISE_1000_HALF		0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL		0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT		E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK	0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT	0
+#define E1000_LEDCTL_LED0_IVRT		0x00000040
+#define E1000_LEDCTL_LED0_BLINK		0x00000080
+
+#define E1000_LEDCTL_MODE_LED_ON	0xE
+#define E1000_LEDCTL_MODE_LED_OFF	0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D	0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C	0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM	0x01       /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM	0x02       /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP	0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC	0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS	0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS	0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT	0x20000000 /* Desc extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE	0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE	0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD	0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC	0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC	0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU	0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP	0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP	0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE	0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC	0x00000004 /* Tx Underrun */
+#define E1000_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */
+
+/* Transmit Control */
+#define E1000_TCTL_EN		0x00000002 /* enable Tx */
+#define E1000_TCTL_PSP		0x00000008 /* pad short packets */
+#define E1000_TCTL_CT		0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD		0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC		0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_MULR		0x10000000 /* Multiple request support */
+
+/* Transmit Arbitration Count */
+#define E1000_TARC0_ENABLE	0x00000400 /* Enable Tx Queue 0 */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK	0x0400
+#define E1000_SCTL_ENABLE_SERDES_LOOPBACK	0x0410
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL	0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL	0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_CRCOFL	0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_IPPCSE	0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD	0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_NFSW_DIS		0x00000040
+#define E1000_RFCTL_NFSR_DIS		0x00000080
+#define E1000_RFCTL_ACK_DIS		0x00001000
+#define E1000_RFCTL_EXTEN		0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS		0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS	0x00020000
+#define E1000_RFCTL_LEF			0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD	15
+#define E1000_CT_SHIFT			4
+#define E1000_COLLISION_DISTANCE	63
+#define E1000_COLD_SHIFT		12
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82543_TIPG_IPGT_FIBER	9
+#define DEFAULT_82543_TIPG_IPGT_COPPER	8
+
+#define E1000_TIPG_IPGT_MASK		0x000003FF
+
+#define DEFAULT_82543_TIPG_IPGR1	8
+#define E1000_TIPG_IPGR1_SHIFT		10
+
+#define DEFAULT_82543_TIPG_IPGR2	6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2	7
+#define E1000_TIPG_IPGR2_SHIFT		20
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE		0x8100  /* 802.3ac packet */
+
+#define ETHERNET_FCS_SIZE		4
+#define MAX_JUMBO_FRAME_SIZE		0x3F00
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP	0x00000020
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE	0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE	0x00000008
+#define E1000_EXTCNF_CTRL_SWFLAG		0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG		0x00000080
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK	0x00FF0000
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT	16
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK	0x0FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT	16
+
+#define E1000_PHY_CTRL_D0A_LPLU			0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU		0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE	0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE		0x00000040
+
+#define E1000_KABGTXD_BGSQLBIAS			0x00050000
+
+/* PBA constants */
+#define E1000_PBA_8K		0x0008    /* 8KB */
+#define E1000_PBA_10K		0x000A    /* 10KB */
+#define E1000_PBA_12K		0x000C    /* 12KB */
+#define E1000_PBA_14K		0x000E    /* 14KB */
+#define E1000_PBA_16K		0x0010    /* 16KB */
+#define E1000_PBA_18K		0x0012
+#define E1000_PBA_20K		0x0014
+#define E1000_PBA_22K		0x0016
+#define E1000_PBA_24K		0x0018
+#define E1000_PBA_26K		0x001A
+#define E1000_PBA_30K		0x001E
+#define E1000_PBA_32K		0x0020
+#define E1000_PBA_34K		0x0022
+#define E1000_PBA_35K		0x0023
+#define E1000_PBA_38K		0x0026
+#define E1000_PBA_40K		0x0028
+#define E1000_PBA_48K		0x0030    /* 48KB */
+#define E1000_PBA_64K		0x0040    /* 64KB */
+
+#define E1000_PBA_RXA_MASK	0xFFFF
+
+#define E1000_PBS_16K		E1000_PBA_16K
+
+#define IFS_MAX			80
+#define IFS_MIN			40
+#define IFS_RATIO		4
+#define IFS_STEP		10
+#define MIN_NUM_XMITS		1000
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI		0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI	0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_DRV_LOAD	0x00000008 /* Driver Loaded Bit */
+
+#define E1000_SWSM2_LOCK	0x00000002 /* Secondary driver semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW		0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE		0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC		0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ		0x00000008 /* Rx sequence error */
+#define E1000_ICR_RXDMT0	0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXO		0x00000040 /* Rx overrun */
+#define E1000_ICR_RXT0		0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_VMMB		0x00000100 /* VM MB event */
+#define E1000_ICR_RXCFG		0x00000400 /* Rx /c/ ordered set */
+#define E1000_ICR_GPI_EN0	0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1	0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2	0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3	0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW	0x00008000
+#define E1000_ICR_MNG		0x00040000 /* Manageability event */
+#define E1000_ICR_TS		0x00080000 /* Time Sync Interrupt */
+#define E1000_ICR_DRSTA		0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED	0x80000000
+#define E1000_ICR_DOUTSYNC	0x10000000 /* NIC DMA out of sync */
+#define E1000_ICR_FER		0x00400000 /* Fatal Error */
+
+#define E1000_ICR_THS		0x00800000 /* ICR.THS: Thermal Sensor Event*/
+#define E1000_ICR_MDDET		0x10000000 /* Malicious Driver Detect */
+
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0	0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1	0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2	0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3	0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0	0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1	0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2	0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3	0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_TCP_TIMER	0x40000000 /* TCP Timer */
+#define E1000_EICR_OTHER	0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+#define E1000_TCPTIMER_KS	0x00000100 /* KickStart */
+#define E1000_TCPTIMER_COUNT_ENABLE	0x00000200 /* Count Enable */
+#define E1000_TCPTIMER_COUNT_FINISH	0x00000400 /* Count finish */
+#define E1000_TCPTIMER_LOOP	0x00000800 /* Loop */
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register.  Each bit is documented below:
+ *   o RXT0   = Receiver Timer Interrupt (ring 0)
+ *   o TXDW   = Transmit Descriptor Written Back
+ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ *   o RXSEQ  = Receive Sequence Error
+ *   o LSC    = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+	E1000_IMS_RXT0   |    \
+	E1000_IMS_TXDW   |    \
+	E1000_IMS_RXDMT0 |    \
+	E1000_IMS_RXSEQ  |    \
+	E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW		E1000_ICR_TXDW    /* Tx desc written back */
+#define E1000_IMS_TXQE		E1000_ICR_TXQE    /* Transmit Queue empty */
+#define E1000_IMS_LSC		E1000_ICR_LSC     /* Link Status Change */
+#define E1000_IMS_VMMB		E1000_ICR_VMMB    /* Mail box activity */
+#define E1000_IMS_RXSEQ		E1000_ICR_RXSEQ   /* Rx sequence error */
+#define E1000_IMS_RXDMT0	E1000_ICR_RXDMT0  /* Rx desc min. threshold */
+#define E1000_IMS_RXO		E1000_ICR_RXO     /* Rx overrun */
+#define E1000_IMS_RXT0		E1000_ICR_RXT0    /* Rx timer intr */
+#define E1000_IMS_TXD_LOW	E1000_ICR_TXD_LOW
+#define E1000_IMS_TS		E1000_ICR_TS      /* Time Sync Interrupt */
+#define E1000_IMS_DRSTA		E1000_ICR_DRSTA   /* Device Reset Asserted */
+#define E1000_IMS_DOUTSYNC	E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_IMS_FER		E1000_ICR_FER /* Fatal Error */
+
+#define E1000_IMS_THS		E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/
+#define E1000_IMS_MDDET		E1000_ICR_MDDET /* Malicious Driver Detect */
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_RX_QUEUE0	E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
+#define E1000_EIMS_RX_QUEUE1	E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
+#define E1000_EIMS_RX_QUEUE2	E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
+#define E1000_EIMS_RX_QUEUE3	E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
+#define E1000_EIMS_TX_QUEUE0	E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
+#define E1000_EIMS_TX_QUEUE1	E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
+#define E1000_EIMS_TX_QUEUE2	E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
+#define E1000_EIMS_TX_QUEUE3	E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
+#define E1000_EIMS_TCP_TIMER	E1000_EICR_TCP_TIMER /* TCP Timer */
+#define E1000_EIMS_OTHER	E1000_EICR_OTHER   /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC		E1000_ICR_LSC       /* Link Status Change */
+#define E1000_ICS_RXSEQ		E1000_ICR_RXSEQ     /* Rx sequence error */
+#define E1000_ICS_RXDMT0	E1000_ICR_RXDMT0    /* Rx desc min. threshold */
+
+/* Extended Interrupt Cause Set */
+#define E1000_EICS_RX_QUEUE0	E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
+#define E1000_EICS_RX_QUEUE1	E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
+#define E1000_EICS_RX_QUEUE2	E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
+#define E1000_EICS_RX_QUEUE3	E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
+#define E1000_EICS_TX_QUEUE0	E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
+#define E1000_EICS_TX_QUEUE1	E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
+#define E1000_EICS_TX_QUEUE2	E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
+#define E1000_EICS_TX_QUEUE3	E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
+#define E1000_EICS_TCP_TIMER	E1000_EICR_TCP_TIMER /* TCP Timer */
+#define E1000_EICS_OTHER	E1000_EICR_OTHER   /* Interrupt Cause Active */
+
+#define E1000_EITR_ITR_INT_MASK	0x0000FFFF
+/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
+#define E1000_EITR_CNT_IGNR	0x80000000 /* Don't reset counters on write */
+#define E1000_EITR_INTERVAL 0x00007FFC
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH	0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH	0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH	0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN	0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_FULL_TX_DESC_WB	0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of descriptors still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC	0x00400000
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW	0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH	0x00000100
+#define FLOW_CONTROL_TYPE		0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE			4    /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE	128  /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots.  However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES	15
+#define E1000_RAH_AV		0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN	4
+#define E1000_RAH_MAC_ADDR_LEN	2
+#define E1000_RAH_QUEUE_MASK_82575	0x000C0000
+#define E1000_RAH_POOL_1	0x00040000
+
+/* Error Codes */
+#define E1000_SUCCESS			0
+#define E1000_ERR_NVM			1
+#define E1000_ERR_PHY			2
+#define E1000_ERR_CONFIG		3
+#define E1000_ERR_PARAM			4
+#define E1000_ERR_MAC_INIT		5
+#define E1000_ERR_PHY_TYPE		6
+#define E1000_ERR_RESET			9
+#define E1000_ERR_MASTER_REQUESTS_PENDING	10
+#define E1000_ERR_HOST_INTERFACE_COMMAND	11
+#define E1000_BLK_PHY_RESET		12
+#define E1000_ERR_SWFW_SYNC		13
+#define E1000_NOT_IMPLEMENTED		14
+#define E1000_ERR_MBX			15
+#define E1000_ERR_INVALID_ARGUMENT	16
+#define E1000_ERR_NO_SPACE		17
+#define E1000_ERR_NVM_PBA_SECTION	18
+#define E1000_ERR_I2C			19
+#define E1000_ERR_INVM_VALUE_NOT_FOUND	20
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT		50
+#define COPPER_LINK_UP_LIMIT		10
+#define PHY_AUTO_NEG_LIMIT		45
+#define PHY_FORCE_LIMIT			20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT		800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT			100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+#define MDIO_OWNERSHIP_TIMEOUT		10
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT		10
+
+/* Flow Control */
+#define E1000_FCRTH_RTH		0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTL_RTL		0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE	0x80000000 /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD		0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_PAUSE	0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR	0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK	0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_ANE		0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW		0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_IV		0x08000000 /* Receive config invalid */
+#define E1000_RXCW_C		0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH	0x40000000 /* Receive config synch */
+
+#define E1000_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED	0x00000010 /* enable Tx timestamping */
+
+#define E1000_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL	0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define E1000_TSYNCRXCTL_ENABLED	0x00000010 /* enable Rx timestamping */
+#define E1000_TSYNCRXCTL_SYSCFI		0x00000020 /* Sys clock frequency */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK		0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE		0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE	0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE	0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE	0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE	0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK		0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE		0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE	0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE	0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE	0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE	0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE	0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE	0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE	0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE	0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT	24
+#define E1000_TIMINCA_INCPERIOD_SHIFT	24
+#define E1000_TIMINCA_INCVALUE_MASK	0x00FFFFFF
+
+#define E1000_TSICR_TXTS		0x00000002
+#define E1000_TSIM_TXTS			0x00000002
+/* TUPLE Filtering Configuration */
+#define E1000_TTQF_DISABLE_MASK		0xF0008000 /* TTQF Disable Mask */
+#define E1000_TTQF_QUEUE_ENABLE		0x100   /* TTQF Queue Enable Bit */
+#define E1000_TTQF_PROTOCOL_MASK	0xFF    /* TTQF Protocol Mask */
+/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */
+#define E1000_TTQF_PROTOCOL_TCP		0x0
+/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */
+#define E1000_TTQF_PROTOCOL_UDP		0x1
+/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */
+#define E1000_TTQF_PROTOCOL_SCTP	0x2
+#define E1000_TTQF_PROTOCOL_SHIFT	5       /* TTQF Protocol Shift */
+#define E1000_TTQF_QUEUE_SHIFT		16      /* TTQF Queue Shfit */
+#define E1000_TTQF_RX_QUEUE_MASK	0x70000 /* TTQF Queue Mask */
+#define E1000_TTQF_MASK_ENABLE		0x10000000 /* TTQF Mask Enable Bit */
+#define E1000_IMIR_CLEAR_MASK		0xF001FFFF /* IMIR Reg Clear Mask */
+#define E1000_IMIR_PORT_BYPASS		0x20000 /* IMIR Port Bypass Bit */
+#define E1000_IMIR_PRIORITY_SHIFT	29 /* IMIR Priority Shift */
+#define E1000_IMIREXT_CLEAR_MASK	0x7FFFF /* IMIREXT Reg Clear Mask */
+
+#define E1000_MDICNFG_EXT_MDIO		0x80000000 /* MDI ext/int destination */
+#define E1000_MDICNFG_COM_MDIO		0x40000000 /* MDI shared w/ lan 0 */
+#define E1000_MDICNFG_PHY_MASK		0x03E00000
+#define E1000_MDICNFG_PHY_SHIFT		21
+
+#define E1000_MEDIA_PORT_COPPER			1
+#define E1000_MEDIA_PORT_OTHER			2
+#define E1000_M88E1112_AUTO_COPPER_SGMII	0x2
+#define E1000_M88E1112_AUTO_COPPER_BASEX	0x3
+#define E1000_M88E1112_STATUS_LINK		0x0004 /* Interface Link Bit */
+#define E1000_M88E1112_MAC_CTRL_1		0x10
+#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK	0x0380 /* Mode Select */
+#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT	7
+#define E1000_M88E1112_PAGE_ADDR		0x16
+#define E1000_M88E1112_STATUS			0x01
+
+#define E1000_THSTAT_LOW_EVENT		0x20000000 /* Low thermal threshold */
+#define E1000_THSTAT_MID_EVENT		0x00200000 /* Mid thermal threshold */
+#define E1000_THSTAT_HIGH_EVENT		0x00002000 /* High thermal threshold */
+#define E1000_THSTAT_PWR_DOWN		0x00000001 /* Power Down Event */
+#define E1000_THSTAT_LINK_THROTTLE	0x00000002 /* Link Spd Throttle Event */
+
+/* I350 EEE defines */
+#define E1000_IPCNFG_EEE_1G_AN		0x00000008 /* IPCNFG EEE Ena 1G AN */
+#define E1000_IPCNFG_EEE_100M_AN	0x00000004 /* IPCNFG EEE Ena 100M AN */
+#define E1000_EEER_TX_LPI_EN		0x00010000 /* EEER Tx LPI Enable */
+#define E1000_EEER_RX_LPI_EN		0x00020000 /* EEER Rx LPI Enable */
+#define E1000_EEER_LPI_FC		0x00040000 /* EEER Ena on Flow Cntrl */
+/* EEE status */
+#define E1000_EEER_EEE_NEG		0x20000000 /* EEE capability nego */
+#define E1000_EEER_RX_LPI_STATUS	0x40000000 /* Rx in LPI state */
+#define E1000_EEER_TX_LPI_STATUS	0x80000000 /* Tx in LPI state */
+#define E1000_EEE_LP_ADV_ADDR_I350	0x040F     /* EEE LP Advertisement */
+#define E1000_M88E1543_PAGE_ADDR	0x16       /* Page Offset Register */
+#define E1000_M88E1543_EEE_CTRL_1	0x0
+#define E1000_M88E1543_EEE_CTRL_1_MS	0x0001     /* EEE Master/Slave */
+#define E1000_EEE_ADV_DEV_I354		7
+#define E1000_EEE_ADV_ADDR_I354		60
+#define E1000_EEE_ADV_100_SUPPORTED	(1 << 1)   /* 100BaseTx EEE Supported */
+#define E1000_EEE_ADV_1000_SUPPORTED	(1 << 2)   /* 1000BaseT EEE Supported */
+#define E1000_PCS_STATUS_DEV_I354	3
+#define E1000_PCS_STATUS_ADDR_I354	1
+#define E1000_PCS_STATUS_RX_LPI_RCVD	0x0400
+#define E1000_PCS_STATUS_TX_LPI_RCVD	0x0800
+#define E1000_EEE_SU_LPI_CLK_STP	0x00800000 /* EEE LPI Clock Stop */
+#define E1000_EEE_LP_ADV_DEV_I210	7          /* EEE LP Adv Device */
+#define E1000_EEE_LP_ADV_ADDR_I210	61         /* EEE LP Adv Register */
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP		0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP	0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP	0x00000004
+#define E1000_GCR_TXD_NO_SNOOP		0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP	0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP	0x00000020
+#define E1000_GCR_CMPL_TMOUT_MASK	0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms	0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND	0x00010000
+#define E1000_GCR_CAP_VER2		0x00040000
+
+#define PCIE_NO_SNOOP_ALL	(E1000_GCR_RXD_NO_SNOOP | \
+				 E1000_GCR_RXDSCW_NO_SNOOP | \
+				 E1000_GCR_RXDSCR_NO_SNOOP | \
+				 E1000_GCR_TXD_NO_SNOOP    | \
+				 E1000_GCR_TXDSCW_NO_SNOOP | \
+				 E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define E1000_MMDAC_FUNC_DATA	0x4000 /* Data, no post increment */
+
+/* mPHY address control and data registers */
+#define E1000_MPHY_ADDR_CTL		0x0024 /* Address Control Reg */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK	0xFFFF0000
+#define E1000_MPHY_DATA			0x0E10 /* Data Register */
+
+/* AFE CSR Offset for PCS CLK */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET	0x0004
+/* Override for near end digital loopback. */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN	0x10
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB	0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE	0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX	0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG	0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE		0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN	0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB	0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK		0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET		0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000	0x0040
+#define MII_CR_SPEED_100	0x2000
+#define MII_CR_SPEED_10		0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS	0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT	0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS	0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT	0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE	0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS	0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS	0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS	0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS	0x0800 /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS	0x1000 /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS	0x2000 /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS	0x4000 /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS	0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD	0x0001   /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS	0x0020   /* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS	0x0040   /* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS	0x0080   /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS	0x0100   /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS	0x0200   /* 100T4 Capable */
+#define NWAY_AR_PAUSE		0x0400   /* Pause operation desired */
+#define NWAY_AR_ASM_DIR		0x0800   /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT	0x2000   /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE	0x8000   /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD	0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS		0x0020 /* LP 10T Half Dplx Capable */
+#define NWAY_LPAR_10T_FD_CAPS		0x0040 /* LP 10T Full Dplx Capable */
+#define NWAY_LPAR_100TX_HD_CAPS		0x0080 /* LP 100TX Half Dplx Capable */
+#define NWAY_LPAR_100TX_FD_CAPS		0x0100 /* LP 100TX Full Dplx Capable */
+#define NWAY_LPAR_100T4_CAPS		0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE			0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR		0x0800 /* LP Asym Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT		0x2000 /* LP detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE		0x4000 /* LP rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE		0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS		0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD		0x0002 /* LP 10T Half Dplx Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS		0x0004 /* LP 10T Full Dplx Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS	0x0008 /* LP 100TX Half Dplx Capable */
+#define NWAY_ER_PAR_DETECT_FAULT	0x0010 /* LP 100TX Full Dplx Capable */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE	0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS	0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS	0x0200 /* Advertise 1000T FD capability  */
+/* 1=Repeater/switch device port 0=DTE device */
+#define CR_1000T_REPEATER_DTE	0x0400
+/* 1=Configure PHY as Master 0=Configure PHY as Slave */
+#define CR_1000T_MS_VALUE	0x0800
+/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+#define CR_1000T_MS_ENABLE	0x1000
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1	0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2	0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3	0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4	0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT		0x00FF /* Num idle err since last rd */
+#define SR_1000T_ASYM_PAUSE_DIR		0x0100 /* LP asym pause direction bit */
+#define SR_1000T_LP_HD_CAPS		0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS		0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS	0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS	0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES		0x4000 /* 1=Local Tx Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT	0x8000 /* Master/Slave config fault */
+
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT	5
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL		0x00 /* Control Register */
+#define PHY_STATUS		0x01 /* Status Register */
+#define PHY_ID1			0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2			0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV		0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY		0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP		0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX	0x07 /* Next Page Tx */
+#define PHY_LP_NEXT_PAGE	0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL		0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS	0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS		0x0F /* Extended Status Reg */
+
+#define PHY_CONTROL_LB		0x4000 /* PHY Loopback bit */
+
+/* NVM Control */
+#define E1000_EECD_SK		0x00000001 /* NVM Clock */
+#define E1000_EECD_CS		0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI		0x00000004 /* NVM Data In */
+#define E1000_EECD_DO		0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ		0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT		0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES		0x00000100 /* NVM Present */
+#define E1000_EECD_SIZE		0x00000200 /* NVM Size (0=64 word 1=256 word) */
+#define E1000_EECD_BLOCKED	0x00008000 /* Bit banging access blocked flag */
+#define E1000_EECD_ABORT	0x00010000 /* NVM operation aborted flag */
+#define E1000_EECD_TIMEOUT	0x00020000 /* NVM read operation timeout flag */
+#define E1000_EECD_ERROR_CLR	0x00040000 /* NVM error status clear bit */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS	0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS	1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD		0x00000200  /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK		0x00007800  /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT	11
+#define E1000_EECD_FLUPD		0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN		0x00100000 /* Ena Auto FLASH update */
+#define E1000_EECD_SEC1VAL		0x00400000 /* Sector One Valid */
+#define E1000_EECD_SEC1VAL_VALID_MASK	(E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+#define E1000_EECD_FLUPD_I210		0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210		0x04000000 /* Update FLASH done */
+#define E1000_EECD_FLASH_DETECTED_I210	0x00080000 /* FLASH detected */
+#define E1000_EECD_SEC1VAL_I210		0x02000000 /* Sector One Valid */
+#define E1000_FLUDONE_ATTEMPTS		20000
+#define E1000_EERD_EEWR_MAX_COUNT	512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX		0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i)	(0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY	E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX	0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX	0x01
+
+#define E1000_I210_FLASH_SECTOR_SIZE	0x1000 /* 4KB FLASH sector unit size */
+/* Secure FLASH mode requires removing MSb */
+#define E1000_I210_FW_PTR_MASK		0x7FFF
+/* Firmware code revision field word offset*/
+#define E1000_I210_FW_VER_OFFSET	328
+
+#define E1000_NVM_RW_REG_DATA	16  /* Offset to data in NVM read/write regs */
+#define E1000_NVM_RW_REG_DONE	2   /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START	1   /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT	2   /* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE	1   /* Flag for polling for write complete */
+#define E1000_NVM_POLL_READ	0   /* Flag for polling for read complete */
+#define E1000_FLASH_UPDATES	2000
+
+/* NVM Word Offsets */
+#define NVM_COMPAT			0x0003
+#define NVM_ID_LED_SETTINGS		0x0004
+#define NVM_VERSION			0x0005
+#define E1000_I210_NVM_FW_MODULE_PTR	0x0010
+#define E1000_I350_NVM_FW_MODULE_PTR	0x0051
+#define NVM_FUTURE_INIT_WORD1		0x0019
+#define NVM_ETRACK_WORD			0x0042
+#define NVM_ETRACK_HIWORD		0x0043
+#define NVM_COMB_VER_OFF		0x0083
+#define NVM_COMB_VER_PTR		0x003d
+
+/* NVM version defines */
+#define NVM_MAJOR_MASK			0xF000
+#define NVM_MINOR_MASK			0x0FF0
+#define NVM_IMAGE_ID_MASK		0x000F
+#define NVM_COMB_VER_MASK		0x00FF
+#define NVM_MAJOR_SHIFT			12
+#define NVM_MINOR_SHIFT			4
+#define NVM_COMB_VER_SHFT		8
+#define NVM_VER_INVALID			0xFFFF
+#define NVM_ETRACK_SHIFT		16
+#define NVM_ETRACK_VALID		0x8000
+#define NVM_NEW_DEC_MASK		0x0F00
+#define NVM_HEX_CONV			16
+#define NVM_HEX_TENS			10
+
+/* FW version defines */
+/* Offset of "Loader patch ptr" in Firmware Header */
+#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET	0x01
+/* Patch generation hour & minutes */
+#define E1000_I350_NVM_FW_VER_WORD1_OFFSET		0x04
+/* Patch generation month & day */
+#define E1000_I350_NVM_FW_VER_WORD2_OFFSET		0x05
+/* Patch generation year */
+#define E1000_I350_NVM_FW_VER_WORD3_OFFSET		0x06
+/* Patch major & minor numbers */
+#define E1000_I350_NVM_FW_VER_WORD4_OFFSET		0x07
+
+#define NVM_MAC_ADDR			0x0000
+#define NVM_SUB_DEV_ID			0x000B
+#define NVM_SUB_VEN_ID			0x000C
+#define NVM_DEV_ID			0x000D
+#define NVM_VEN_ID			0x000E
+#define NVM_INIT_CTRL_2			0x000F
+#define NVM_INIT_CTRL_4			0x0013
+#define NVM_LED_1_CFG			0x001C
+#define NVM_LED_0_2_CFG			0x001F
+
+#define NVM_COMPAT_VALID_CSUM		0x0001
+#define NVM_FUTURE_INIT_WORD1_VALID_CSUM	0x0040
+
+#define NVM_ETS_CFG			0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK	0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT	6
+#define NVM_ETS_TYPE_MASK		0x0038
+#define NVM_ETS_TYPE_SHIFT		3
+#define NVM_ETS_TYPE_EMC		0x000
+#define NVM_ETS_NUM_SENSORS_MASK	0x0007
+#define NVM_ETS_DATA_LOC_MASK		0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT		10
+#define NVM_ETS_DATA_INDEX_MASK		0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT	8
+#define NVM_ETS_DATA_HTHRESH_MASK	0x00FF
+#define NVM_INIT_CONTROL2_REG		0x000F
+#define NVM_INIT_CONTROL3_PORT_B	0x0014
+#define NVM_INIT_3GIO_3			0x001A
+#define NVM_SWDEF_PINS_CTRL_PORT_0	0x0020
+#define NVM_INIT_CONTROL3_PORT_A	0x0024
+#define NVM_CFG				0x0012
+#define NVM_ALT_MAC_ADDR_PTR		0x0037
+#define NVM_CHECKSUM_REG		0x003F
+#define NVM_COMPATIBILITY_REG_3		0x0003
+#define NVM_COMPATIBILITY_BIT_MASK	0x8000
+
+#define E1000_NVM_CFG_DONE_PORT_0	0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1	0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2	0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3	0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a)	((a) ? (0x40 + (0x40 * (a))) : 0)
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO		0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO		0x0004 /* MDIO accesses routed extrnl */
+/* Offset of Link Mode bits for 82575/82576 */
+#define NVM_WORD24_LNK_MODE_OFFSET	8
+/* Offset of Link Mode bits for 82580 up */
+#define NVM_WORD24_82580_LNK_MODE_OFFSET	4
+
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK		0x3000
+#define NVM_WORD0F_PAUSE		0x1000
+#define NVM_WORD0F_ASM_DIR		0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+#define NVM_WORD1A_ASPM_MASK		0x000C
+
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define NVM_COMPAT_LOM			0x0800
+
+/* length of string needed to store PBA number */
+#define E1000_PBANUM_LENGTH		11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM				0xBABA
+
+/* PBA (printed board assembly) number words */
+#define NVM_PBA_OFFSET_0		8
+#define NVM_PBA_OFFSET_1		9
+#define NVM_PBA_PTR_GUARD		0xFAFA
+#define NVM_RESERVED_WORD		0xFFFF
+#define NVM_WORD_SIZE_BASE_SHIFT	6
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI	5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI	0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI	0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI	0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI	0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI	0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI	0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000	0x0000
+#define ID_LED_RESERVED_FFFF	0xFFFF
+#define ID_LED_DEFAULT		((ID_LED_OFF1_ON2  << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2	0x1
+#define ID_LED_DEF1_ON2		0x2
+#define ID_LED_DEF1_OFF2	0x3
+#define ID_LED_ON1_DEF2		0x4
+#define ID_LED_ON1_ON2		0x5
+#define ID_LED_ON1_OFF2		0x6
+#define ID_LED_OFF1_DEF2	0x7
+#define ID_LED_OFF1_ON2		0x8
+#define ID_LED_OFF1_OFF2	0x9
+
+#define IGP_ACTIVITY_LED_MASK	0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE	0x0300
+#define IGP_LED3_MODE		0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCI_HEADER_TYPE_REGISTER	0x0E
+#define PCIE_LINK_STATUS		0x12
+#define PCIE_DEVICE_CONTROL2		0x28
+
+#define PCI_HEADER_TYPE_MULTIFUNC	0x80
+#define PCIE_LINK_WIDTH_MASK		0x3F0
+#define PCIE_LINK_WIDTH_SHIFT		4
+#define PCIE_LINK_SPEED_MASK		0x0F
+#define PCIE_LINK_SPEED_2500		0x01
+#define PCIE_LINK_SPEED_5000		0x02
+#define PCIE_DEVICE_CONTROL2_16ms	0x0005
+
+#ifndef ETH_ADDR_LEN
+#define ETH_ADDR_LEN			6
+#endif
+
+#define PHY_REVISION_MASK		0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS		0x1F  /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG		0xF
+
+/* Bit definitions for valid PHY IDs.
+ * I = Integrated
+ * E = External
+ */
+#define M88E1000_E_PHY_ID	0x01410C50
+#define M88E1000_I_PHY_ID	0x01410C30
+#define M88E1011_I_PHY_ID	0x01410C20
+#define IGP01E1000_I_PHY_ID	0x02A80380
+#define M88E1111_I_PHY_ID	0x01410CC0
+#define M88E1543_E_PHY_ID	0x01410EA0
+#define M88E1112_E_PHY_ID	0x01410C90
+#define I347AT4_E_PHY_ID	0x01410DC0
+#define M88E1340M_E_PHY_ID	0x01410DF0
+#define GG82563_E_PHY_ID	0x01410CA0
+#define IGP03E1000_E_PHY_ID	0x02A80390
+#define IFE_E_PHY_ID		0x02A80330
+#define IFE_PLUS_E_PHY_ID	0x02A80320
+#define IFE_C_E_PHY_ID		0x02A80310
+#define I82580_I_PHY_ID		0x015403A0
+#define I350_I_PHY_ID		0x015403B0
+#define I210_I_PHY_ID		0x01410C00
+#define IGP04E1000_E_PHY_ID	0x02A80391
+#define M88_VENDOR		0x0141
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL		0x10  /* PHY Specific Control Reg */
+#define M88E1000_PHY_SPEC_STATUS	0x11  /* PHY Specific Status Reg */
+#define M88E1000_EXT_PHY_SPEC_CTRL	0x14  /* Extended PHY Specific Cntrl */
+#define M88E1000_RX_ERR_CNTR		0x15  /* Receive Error Counter */
+
+#define M88E1000_PHY_PAGE_SELECT	0x1D  /* Reg 29 for pg number setting */
+#define M88E1000_PHY_GEN_CONTROL	0x1E  /* meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL	0x0002 /* 1=Polarity Reverse enabled */
+/* MDI Crossover Mode bits 6:5 Manual MDI configuration */
+#define M88E1000_PSCR_MDI_MANUAL_MODE	0x0000
+#define M88E1000_PSCR_MDIX_MANUAL_MODE	0x0020  /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T	0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE	0x0060
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX	0x0800 /* 1=Assert CRS on Tx */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY	0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT		0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX		0x0040 /* 1=MDIX; 0=MDI */
+/* 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH	0x0380
+#define M88E1000_PSSR_LINK		0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED	0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_SPEED		0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS		0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT	7
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK	0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X	0x0000
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK	0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X	0x0100
+#define M88E1000_EPSCR_TX_CLK_25	0x0070 /* 25  MHz TX_CLK */
+
+/* Intel I347AT4 Registers */
+#define I347AT4_PCDL		0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC		0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT	0x16
+
+/* I347AT4 Extended PHY Specific Control Register */
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE	0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK	0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X	0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X	0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X	0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X	0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X	0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X	0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X	0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X	0x7000
+
+/* I347AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT	0x0400 /* 0=cm 1=meters */
+
+/* M88E1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE	0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK	0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X	0x0800
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT	5
+#define GG82563_REG(page, reg)	\
+	(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG	30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL		GG82563_REG(0, 16) /* PHY Spec Cntrl */
+#define GG82563_PHY_PAGE_SELECT		GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2		GG82563_REG(0, 26) /* PHY Spec Cntrl2 */
+#define GG82563_PHY_PAGE_SELECT_ALT	GG82563_REG(0, 29) /* Alt Page Select */
+
+/* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL	GG82563_REG(2, 21)
+
+#define GG82563_PHY_DSP_DISTANCE	GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+/* Kumeran Mode Control */
+#define GG82563_PHY_KMRN_MODE_CTRL	GG82563_REG(193, 16)
+#define GG82563_PHY_PWR_MGMT_CTRL	GG82563_REG(193, 20) /* Pwr Mgt Ctrl */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_INBAND_CTRL		GG82563_REG(194, 18) /* Inband Ctrl */
+
+/* MDI Control */
+#define E1000_MDIC_REG_MASK	0x001F0000
+#define E1000_MDIC_REG_SHIFT	16
+#define E1000_MDIC_PHY_MASK	0x03E00000
+#define E1000_MDIC_PHY_SHIFT	21
+#define E1000_MDIC_OP_WRITE	0x04000000
+#define E1000_MDIC_OP_READ	0x08000000
+#define E1000_MDIC_READY	0x10000000
+#define E1000_MDIC_ERROR	0x40000000
+#define E1000_MDIC_DEST		0x80000000
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY		0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT	8
+#define E1000_GEN_POLL_TIMEOUT		640
+
+/* LinkSec register fields */
+#define E1000_LSECTXCAP_SUM_MASK	0x00FF0000
+#define E1000_LSECTXCAP_SUM_SHIFT	16
+#define E1000_LSECRXCAP_SUM_MASK	0x00FF0000
+#define E1000_LSECRXCAP_SUM_SHIFT	16
+
+#define E1000_LSECTXCTRL_EN_MASK	0x00000003
+#define E1000_LSECTXCTRL_DISABLE	0x0
+#define E1000_LSECTXCTRL_AUTH		0x1
+#define E1000_LSECTXCTRL_AUTH_ENCRYPT	0x2
+#define E1000_LSECTXCTRL_AISCI		0x00000020
+#define E1000_LSECTXCTRL_PNTHRSH_MASK	0xFFFFFF00
+#define E1000_LSECTXCTRL_RSV_MASK	0x000000D8
+
+#define E1000_LSECRXCTRL_EN_MASK	0x0000000C
+#define E1000_LSECRXCTRL_EN_SHIFT	2
+#define E1000_LSECRXCTRL_DISABLE	0x0
+#define E1000_LSECRXCTRL_CHECK		0x1
+#define E1000_LSECRXCTRL_STRICT		0x2
+#define E1000_LSECRXCTRL_DROP		0x3
+#define E1000_LSECRXCTRL_PLSH		0x00000040
+#define E1000_LSECRXCTRL_RP		0x00000080
+#define E1000_LSECRXCTRL_RSV_MASK	0xFFFFFF33
+
+/* Tx Rate-Scheduler Config fields */
+#define E1000_RTTBCNRC_RS_ENA		0x80000000
+#define E1000_RTTBCNRC_RF_DEC_MASK	0x00003FFF
+#define E1000_RTTBCNRC_RF_INT_SHIFT	14
+#define E1000_RTTBCNRC_RF_INT_MASK	\
+	(E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
+
+/* DMA Coalescing register fields */
+/* DMA Coalescing Watchdog Timer */
+#define E1000_DMACR_DMACWT_MASK		0x00003FFF
+/* DMA Coalescing Rx Threshold */
+#define E1000_DMACR_DMACTHR_MASK	0x00FF0000
+#define E1000_DMACR_DMACTHR_SHIFT	16
+/* Lx when no PCIe transactions */
+#define E1000_DMACR_DMAC_LX_MASK	0x30000000
+#define E1000_DMACR_DMAC_LX_SHIFT	28
+#define E1000_DMACR_DMAC_EN		0x80000000 /* Enable DMA Coalescing */
+/* DMA Coalescing BMC-to-OS Watchdog Enable */
+#define E1000_DMACR_DC_BMC2OSW_EN	0x00008000
+
+/* DMA Coalescing Transmit Threshold */
+#define E1000_DMCTXTH_DMCTTHR_MASK	0x00000FFF
+
+#define E1000_DMCTLX_TTLX_MASK		0x00000FFF /* Time to LX request */
+
+/* Rx Traffic Rate Threshold */
+#define E1000_DMCRTRH_UTRESH_MASK	0x0007FFFF
+/* Rx packet rate in current window */
+#define E1000_DMCRTRH_LRPRCW		0x80000000
+
+/* DMA Coal Rx Traffic Current Count */
+#define E1000_DMCCNT_CCOUNT_MASK	0x01FFFFFF
+
+/* Flow ctrl Rx Threshold High val */
+#define E1000_FCRTC_RTH_COAL_MASK	0x0003FFF0
+#define E1000_FCRTC_RTH_COAL_SHIFT	4
+/* Lx power decision based on DMA coal */
+#define E1000_PCIEMISC_LX_DECISION	0x00000080
+
+#define E1000_RXPBS_CFG_TS_EN		0x80000000 /* Timestamp in Rx buffer */
+#define E1000_RXPBS_SIZE_I210_MASK	0x0000003F /* Rx packet buffer size */
+#define E1000_TXPB0S_SIZE_I210_MASK	0x0000003F /* Tx packet buffer 0 size */
+
+/* Proxy Filter Control */
+#define E1000_PROXYFC_D0		0x00000001 /* Enable offload in D0 */
+#define E1000_PROXYFC_EX		0x00000004 /* Directed exact proxy */
+#define E1000_PROXYFC_MC		0x00000008 /* Directed MC Proxy */
+#define E1000_PROXYFC_BC		0x00000010 /* Broadcast Proxy Enable */
+#define E1000_PROXYFC_ARP_DIRECTED	0x00000020 /* Directed ARP Proxy Ena */
+#define E1000_PROXYFC_IPV4		0x00000040 /* Directed IPv4 Enable */
+#define E1000_PROXYFC_IPV6		0x00000080 /* Directed IPv6 Enable */
+#define E1000_PROXYFC_NS		0x00000200 /* IPv6 Neighbor Solicitation */
+#define E1000_PROXYFC_ARP		0x00000800 /* ARP Request Proxy Ena */
+/* Proxy Status */
+#define E1000_PROXYS_CLEAR		0xFFFFFFFF /* Clear */
+
+/* Firmware Status */
+#define E1000_FWSTS_FWRI		0x80000000 /* FW Reset Indication */
+/* VF Control */
+#define E1000_VTCTRL_RST		0x04000000 /* Reset VF */
+
+#define E1000_STATUS_LAN_ID_MASK	0x00000000C /* Mask for Lan ID field */
+/* Lan ID bit field offset in status register */
+#define E1000_STATUS_LAN_ID_OFFSET	2
+#define E1000_VFTA_ENTRIES		128
+#ifndef E1000_UNUSEDARG
+#define E1000_UNUSEDARG
+#endif /* E1000_UNUSEDARG */
+#endif /* _E1000_DEFINES_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_hw.h b/kernel/linux/kni/ethtool/igb/e1000_hw.h
new file mode 100644
index 0000000..ed43ef5
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_hw.h
@@ -0,0 +1,778 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep.h"
+#include "e1000_regs.h"
+#include "e1000_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576			0x10C9
+#define E1000_DEV_ID_82576_FIBER		0x10E6
+#define E1000_DEV_ID_82576_SERDES		0x10E7
+#define E1000_DEV_ID_82576_QUAD_COPPER		0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2	0x1526
+#define E1000_DEV_ID_82576_NS			0x150A
+#define E1000_DEV_ID_82576_NS_SERDES		0x1518
+#define E1000_DEV_ID_82576_SERDES_QUAD		0x150D
+#define E1000_DEV_ID_82575EB_COPPER		0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES	0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER	0x10D6
+#define E1000_DEV_ID_82580_COPPER		0x150E
+#define E1000_DEV_ID_82580_FIBER		0x150F
+#define E1000_DEV_ID_82580_SERDES		0x1510
+#define E1000_DEV_ID_82580_SGMII		0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL		0x1516
+#define E1000_DEV_ID_82580_QUAD_FIBER		0x1527
+#define E1000_DEV_ID_I350_COPPER		0x1521
+#define E1000_DEV_ID_I350_FIBER			0x1522
+#define E1000_DEV_ID_I350_SERDES		0x1523
+#define E1000_DEV_ID_I350_SGMII			0x1524
+#define E1000_DEV_ID_I350_DA4			0x1546
+#define E1000_DEV_ID_I210_COPPER		0x1533
+#define E1000_DEV_ID_I210_COPPER_OEM1		0x1534
+#define E1000_DEV_ID_I210_COPPER_IT		0x1535
+#define E1000_DEV_ID_I210_FIBER			0x1536
+#define E1000_DEV_ID_I210_SERDES		0x1537
+#define E1000_DEV_ID_I210_SGMII			0x1538
+#define E1000_DEV_ID_I210_COPPER_FLASHLESS	0x157B
+#define E1000_DEV_ID_I210_SERDES_FLASHLESS	0x157C
+#define E1000_DEV_ID_I211_COPPER		0x1539
+#define E1000_DEV_ID_I354_BACKPLANE_1GBPS	0x1F40
+#define E1000_DEV_ID_I354_SGMII			0x1F41
+#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS	0x1F45
+#define E1000_DEV_ID_DH89XXCC_SGMII		0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES		0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE		0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP		0x0440
+
+#define E1000_REVISION_0	0
+#define E1000_REVISION_1	1
+#define E1000_REVISION_2	2
+#define E1000_REVISION_3	3
+#define E1000_REVISION_4	4
+
+#define E1000_FUNC_0		0
+#define E1000_FUNC_1		1
+#define E1000_FUNC_2		2
+#define E1000_FUNC_3		3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0	0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1	3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2	6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3	9
+
+enum e1000_mac_type {
+	e1000_undefined = 0,
+	e1000_82575,
+	e1000_82576,
+	e1000_82580,
+	e1000_i350,
+	e1000_i354,
+	e1000_i210,
+	e1000_i211,
+	e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+	e1000_media_type_unknown = 0,
+	e1000_media_type_copper = 1,
+	e1000_media_type_fiber = 2,
+	e1000_media_type_internal_serdes = 3,
+	e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+	e1000_nvm_unknown = 0,
+	e1000_nvm_none,
+	e1000_nvm_eeprom_spi,
+	e1000_nvm_flash_hw,
+	e1000_nvm_invm,
+	e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+	e1000_nvm_override_none = 0,
+	e1000_nvm_override_spi_small,
+	e1000_nvm_override_spi_large,
+};
+
+enum e1000_phy_type {
+	e1000_phy_unknown = 0,
+	e1000_phy_none,
+	e1000_phy_m88,
+	e1000_phy_igp,
+	e1000_phy_igp_2,
+	e1000_phy_gg82563,
+	e1000_phy_igp_3,
+	e1000_phy_ife,
+	e1000_phy_82580,
+	e1000_phy_vf,
+	e1000_phy_i210,
+};
+
+enum e1000_bus_type {
+	e1000_bus_type_unknown = 0,
+	e1000_bus_type_pci,
+	e1000_bus_type_pcix,
+	e1000_bus_type_pci_express,
+	e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+	e1000_bus_speed_unknown = 0,
+	e1000_bus_speed_33,
+	e1000_bus_speed_66,
+	e1000_bus_speed_100,
+	e1000_bus_speed_120,
+	e1000_bus_speed_133,
+	e1000_bus_speed_2500,
+	e1000_bus_speed_5000,
+	e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+	e1000_bus_width_unknown = 0,
+	e1000_bus_width_pcie_x1,
+	e1000_bus_width_pcie_x2,
+	e1000_bus_width_pcie_x4 = 4,
+	e1000_bus_width_pcie_x8 = 8,
+	e1000_bus_width_32,
+	e1000_bus_width_64,
+	e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+	e1000_1000t_rx_status_not_ok = 0,
+	e1000_1000t_rx_status_ok,
+	e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+	e1000_rev_polarity_normal = 0,
+	e1000_rev_polarity_reversed,
+	e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+	e1000_fc_none = 0,
+	e1000_fc_rx_pause,
+	e1000_fc_tx_pause,
+	e1000_fc_full,
+	e1000_fc_default = 0xFF
+};
+
+enum e1000_ms_type {
+	e1000_ms_hw_default = 0,
+	e1000_ms_force_master,
+	e1000_ms_force_slave,
+	e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+	e1000_smart_speed_default = 0,
+	e1000_smart_speed_on,
+	e1000_smart_speed_off
+};
+
+enum e1000_serdes_link_state {
+	e1000_serdes_link_down = 0,
+	e1000_serdes_link_autoneg_progress,
+	e1000_serdes_link_autoneg_complete,
+	e1000_serdes_link_forced_up
+};
+
+#ifndef __le16
+#define __le16 u16
+#endif
+#ifndef __le32
+#define __le32 u32
+#endif
+#ifndef __le64
+#define __le64 u64
+#endif
+/* Receive Descriptor */
+struct e1000_rx_desc {
+	__le64 buffer_addr; /* Address of the descriptor's data buffer */
+	__le16 length;      /* Length of data DMAed into data buffer */
+	__le16 csum; /* Packet checksum */
+	u8  status;  /* Descriptor status */
+	u8  errors;  /* Descriptor Errors */
+	__le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+	struct {
+		__le64 buffer_addr;
+		__le64 reserved;
+	} read;
+	struct {
+		struct {
+			__le32 mrq; /* Multiple Rx Queues */
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id;  /* IP id */
+					__le16 csum;   /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;  /* ext status/error */
+			__le16 length;
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS	(MAX_PS_BUFFERS - 1)
+
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+	struct {
+		/* one buffer for protocol header(s), three data buffers */
+		__le64 buffer_addr[MAX_PS_BUFFERS];
+	} read;
+	struct {
+		struct {
+			__le32 mrq;  /* Multiple Rx Queues */
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;  /* ext status/error */
+			__le16 length0;  /* length of buffer 0 */
+			__le16 vlan;  /* VLAN tag */
+		} middle;
+		struct {
+			__le16 header_status;
+			/* length of buffers 1-3 */
+			__le16 length[PS_PAGE_BUFFERS];
+		} upper;
+		__le64 reserved;
+	} wb; /* writeback */
+};
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+	__le64 buffer_addr;   /* Address of the descriptor's data buffer */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;  /* Data buffer length */
+			u8 cso;  /* Checksum offset */
+			u8 cmd;  /* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status; /* Descriptor status */
+			u8 css;  /* Checksum start */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+	union {
+		__le32 ip_config;
+		struct {
+			u8 ipcss;  /* IP checksum start */
+			u8 ipcso;  /* IP checksum offset */
+			__le16 ipcse;  /* IP checksum end */
+		} ip_fields;
+	} lower_setup;
+	union {
+		__le32 tcp_config;
+		struct {
+			u8 tucss;  /* TCP checksum start */
+			u8 tucso;  /* TCP checksum offset */
+			__le16 tucse;  /* TCP checksum end */
+		} tcp_fields;
+	} upper_setup;
+	__le32 cmd_and_length;
+	union {
+		__le32 data;
+		struct {
+			u8 status;  /* Descriptor status */
+			u8 hdr_len;  /* Header length */
+			__le16 mss;  /* Maximum segment size */
+		} fields;
+	} tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+	__le64 buffer_addr;  /* Address of the descriptor's buffer address */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;  /* Data buffer length */
+			u8 typ_len_ext;
+			u8 cmd;
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;  /* Descriptor status */
+			u8 popts;  /* Packet Options */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+	u64 crcerrs;
+	u64 algnerrc;
+	u64 symerrs;
+	u64 rxerrc;
+	u64 mpc;
+	u64 scc;
+	u64 ecol;
+	u64 mcc;
+	u64 latecol;
+	u64 colc;
+	u64 dc;
+	u64 tncrs;
+	u64 sec;
+	u64 cexterr;
+	u64 rlec;
+	u64 xonrxc;
+	u64 xontxc;
+	u64 xoffrxc;
+	u64 xofftxc;
+	u64 fcruc;
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc;
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mgprc;
+	u64 mgpdc;
+	u64 mgptc;
+	u64 tor;
+	u64 tot;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 tsctc;
+	u64 tsctfc;
+	u64 iac;
+	u64 icrxptc;
+	u64 icrxatc;
+	u64 ictxptc;
+	u64 ictxatc;
+	u64 ictxqec;
+	u64 ictxqmtc;
+	u64 icrxdmtc;
+	u64 icrxoc;
+	u64 cbtmpc;
+	u64 htdpmc;
+	u64 cbrdpc;
+	u64 cbrmpc;
+	u64 rpthc;
+	u64 hgptc;
+	u64 htcbdpc;
+	u64 hgorc;
+	u64 hgotc;
+	u64 lenerrs;
+	u64 scvpc;
+	u64 hrmpc;
+	u64 doosync;
+	u64 o2bgptc;
+	u64 o2bspc;
+	u64 b2ospc;
+	u64 b2ogprc;
+};
+
+
+struct e1000_phy_stats {
+	u32 idle_errors;
+	u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+	u32 signature;
+	u8  status;
+	u8  reserved0;
+	u16 vlan_id;
+	u32 reserved1;
+	u16 reserved2;
+	u8  reserved3;
+	u8  checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+	u8 command_id;
+	u8 command_length;
+	u8 command_options;
+	u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH	252
+struct e1000_host_command_info {
+	struct e1000_host_command_header command_header;
+	u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+	u8  command_id;
+	u8  checksum;
+	u16 reserved1;
+	u16 reserved2;
+	u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH	0x6F8
+struct e1000_host_mng_command_info {
+	struct e1000_host_mng_command_header command_header;
+	u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_manage.h"
+#include "e1000_mbx.h"
+
+/* Function pointers for the MAC. */
+struct e1000_mac_operations {
+	s32  (*init_params)(struct e1000_hw *);
+	s32  (*id_led_init)(struct e1000_hw *);
+	s32  (*blink_led)(struct e1000_hw *);
+	bool (*check_mng_mode)(struct e1000_hw *);
+	s32  (*check_for_link)(struct e1000_hw *);
+	s32  (*cleanup_led)(struct e1000_hw *);
+	void (*clear_hw_cntrs)(struct e1000_hw *);
+	void (*clear_vfta)(struct e1000_hw *);
+	s32  (*get_bus_info)(struct e1000_hw *);
+	void (*set_lan_id)(struct e1000_hw *);
+	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+	s32  (*led_on)(struct e1000_hw *);
+	s32  (*led_off)(struct e1000_hw *);
+	void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
+	s32  (*reset_hw)(struct e1000_hw *);
+	s32  (*init_hw)(struct e1000_hw *);
+	void (*shutdown_serdes)(struct e1000_hw *);
+	void (*power_up_serdes)(struct e1000_hw *);
+	s32  (*setup_link)(struct e1000_hw *);
+	s32  (*setup_physical_interface)(struct e1000_hw *);
+	s32  (*setup_led)(struct e1000_hw *);
+	void (*write_vfta)(struct e1000_hw *, u32, u32);
+	void (*config_collision_dist)(struct e1000_hw *);
+	void (*rar_set)(struct e1000_hw *, u8*, u32);
+	s32  (*read_mac_addr)(struct e1000_hw *);
+	s32  (*validate_mdi_setting)(struct e1000_hw *);
+	s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+	s32  (*acquire_swfw_sync)(struct e1000_hw *, u16);
+	void (*release_swfw_sync)(struct e1000_hw *, u16);
+};
+
+/* When to use various PHY register access functions:
+ *
+ *                 Func   Caller
+ *   Function      Does   Does    When to use
+ *   ~~~~~~~~~~~~  ~~~~~  ~~~~~~  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *   X_reg         L,P,A  n/a     for simple PHY reg accesses
+ *   X_reg_locked  P,A    L       for multiple accesses of different regs
+ *                                on different pages
+ *   X_reg_page    A      L,P     for multiple accesses of different regs
+ *                                on the same page
+ *
+ * Where X=[read|write], L=locking, P=sets page, A=register access
+ *
+ */
+struct e1000_phy_operations {
+	s32  (*init_params)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
+	s32  (*check_reset_block)(struct e1000_hw *);
+	s32  (*commit)(struct e1000_hw *);
+	s32  (*force_speed_duplex)(struct e1000_hw *);
+	s32  (*get_cfg_done)(struct e1000_hw *hw);
+	s32  (*get_cable_length)(struct e1000_hw *);
+	s32  (*get_info)(struct e1000_hw *);
+	s32  (*set_page)(struct e1000_hw *, u16);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_page)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
+	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
+	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_page)(struct e1000_hw *, u32, u16);
+	void (*power_up)(struct e1000_hw *);
+	void (*power_down)(struct e1000_hw *);
+	s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+	s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
+};
+
+/* Function pointers for the NVM. */
+struct e1000_nvm_operations {
+	s32  (*init_params)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	void (*reload)(struct e1000_hw *);
+	s32  (*update)(struct e1000_hw *);
+	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
+	s32  (*validate)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
+};
+
+#define E1000_MAX_SENSORS		3
+
+struct e1000_thermal_diode_data {
+	u8 location;
+	u8 temp;
+	u8 caution_thresh;
+	u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+	struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
+struct e1000_mac_info {
+	struct e1000_mac_operations ops;
+	u8 addr[ETH_ADDR_LEN];
+	u8 perm_addr[ETH_ADDR_LEN];
+
+	enum e1000_mac_type type;
+
+	u32 collision_delta;
+	u32 ledctl_default;
+	u32 ledctl_mode1;
+	u32 ledctl_mode2;
+	u32 mc_filter_type;
+	u32 tx_packet_delta;
+	u32 txcw;
+
+	u16 current_ifs_val;
+	u16 ifs_max_val;
+	u16 ifs_min_val;
+	u16 ifs_ratio;
+	u16 ifs_step_size;
+	u16 mta_reg_count;
+	u16 uta_reg_count;
+
+	/* Maximum size of the MTA register table in all supported adapters */
+	#define MAX_MTA_REG 128
+	u32 mta_shadow[MAX_MTA_REG];
+	u16 rar_entry_count;
+
+	u8  forced_speed_duplex;
+
+	bool adaptive_ifs;
+	bool has_fwsm;
+	bool arc_subsystem_valid;
+	bool asf_firmware_present;
+	bool autoneg;
+	bool autoneg_failed;
+	bool get_link_status;
+	bool in_ifs_mode;
+	enum e1000_serdes_link_state serdes_link_state;
+	bool serdes_has_link;
+	bool tx_pkt_filtering;
+	struct e1000_thermal_sensor_data thermal_sensor_data;
+};
+
+struct e1000_phy_info {
+	struct e1000_phy_operations ops;
+	enum e1000_phy_type type;
+
+	enum e1000_1000t_rx_status local_rx;
+	enum e1000_1000t_rx_status remote_rx;
+	enum e1000_ms_type ms_type;
+	enum e1000_ms_type original_ms_type;
+	enum e1000_rev_polarity cable_polarity;
+	enum e1000_smart_speed smart_speed;
+
+	u32 addr;
+	u32 id;
+	u32 reset_delay_us; /* in usec */
+	u32 revision;
+
+	enum e1000_media_type media_type;
+
+	u16 autoneg_advertised;
+	u16 autoneg_mask;
+	u16 cable_length;
+	u16 max_cable_length;
+	u16 min_cable_length;
+
+	u8 mdix;
+
+	bool disable_polarity_correction;
+	bool is_mdix;
+	bool polarity_correction;
+	bool reset_disable;
+	bool speed_downgraded;
+	bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+	struct e1000_nvm_operations ops;
+	enum e1000_nvm_type type;
+	enum e1000_nvm_override override;
+
+	u32 flash_bank_size;
+	u32 flash_base_addr;
+
+	u16 word_size;
+	u16 delay_usec;
+	u16 address_bits;
+	u16 opcode_bits;
+	u16 page_size;
+};
+
+struct e1000_bus_info {
+	enum e1000_bus_type type;
+	enum e1000_bus_speed speed;
+	enum e1000_bus_width width;
+
+	u16 func;
+	u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+	u32 high_water;  /* Flow control high-water mark */
+	u32 low_water;  /* Flow control low-water mark */
+	u16 pause_time;  /* Flow control pause timer */
+	u16 refresh_time;  /* Flow control refresh timer */
+	bool send_xon;  /* Flow control send XON */
+	bool strict_ieee;  /* Strict IEEE mode */
+	enum e1000_fc_mode current_mode;  /* FC mode in effect */
+	enum e1000_fc_mode requested_mode;  /* FC mode requested by caller */
+};
+
+struct e1000_mbx_operations {
+	s32 (*init_params)(struct e1000_hw *hw);
+	s32 (*read)(struct e1000_hw *, u32 *, u16,  u16);
+	s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+	s32 (*read_posted)(struct e1000_hw *, u32 *, u16,  u16);
+	s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+	s32 (*check_for_msg)(struct e1000_hw *, u16);
+	s32 (*check_for_ack)(struct e1000_hw *, u16);
+	s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct e1000_mbx_info {
+	struct e1000_mbx_operations ops;
+	struct e1000_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u16 size;
+};
+
+struct e1000_dev_spec_82575 {
+	bool sgmii_active;
+	bool global_device_reset;
+	bool eee_disable;
+	bool module_plugged;
+	bool clear_semaphore_once;
+	u32 mtu;
+	struct sfp_e1000_flags eth_flags;
+	u8 media_port;
+	bool media_changed;
+};
+
+struct e1000_dev_spec_vf {
+	u32 vf_number;
+	u32 v2p_mailbox;
+};
+
+struct e1000_hw {
+	void *back;
+
+	u8 __iomem *hw_addr;
+	u8 __iomem *flash_address;
+	unsigned long io_base;
+
+	struct e1000_mac_info  mac;
+	struct e1000_fc_info   fc;
+	struct e1000_phy_info  phy;
+	struct e1000_nvm_info  nvm;
+	struct e1000_bus_info  bus;
+	struct e1000_mbx_info mbx;
+	struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+	union {
+		struct e1000_dev_spec_82575 _82575;
+		struct e1000_dev_spec_vf vf;
+	} dev_spec;
+
+	u16 device_id;
+	u16 subsystem_vendor_id;
+	u16 subsystem_device_id;
+	u16 vendor_id;
+
+	u8  revision_id;
+};
+
+#include "e1000_82575.h"
+#include "e1000_i210.h"
+
+/* These functions must be implemented by drivers */
+s32  e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32  e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.c b/kernel/linux/kni/ethtool/igb/e1000_i210.c
new file mode 100644
index 0000000..a4fabc3
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_i210.c
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+
+static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw);
+static void e1000_release_nvm_i210(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw);
+static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+				u16 *data);
+static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw);
+static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
+
+/**
+ *  e1000_acquire_nvm_i210 - Request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the necessary semaphores for exclusive access to the EEPROM.
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_acquire_nvm_i210");
+
+	ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_release_nvm_i210 - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ *  then release the semaphores acquired.
+ **/
+static void e1000_release_nvm_i210(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_release_nvm_i210");
+
+	e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ *  e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
+ *  will also specify which port we're acquiring the lock for.
+ **/
+s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	s32 ret_val = E1000_SUCCESS;
+	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+	DEBUGFUNC("e1000_acquire_swfw_sync_i210");
+
+	while (i < timeout) {
+		if (e1000_get_hw_semaphore_i210(hw)) {
+			ret_val = -E1000_ERR_SWFW_SYNC;
+			goto out;
+		}
+
+		swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask)))
+			break;
+
+		/*
+		 * Firmware currently using resource (fwmask)
+		 * or other software thread using resource (swmask)
+		 */
+		e1000_put_hw_semaphore_generic(hw);
+		msec_delay_irq(5);
+		i++;
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+		ret_val = -E1000_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	swfw_sync |= swmask;
+	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
+
+	e1000_put_hw_semaphore_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_release_swfw_sync_i210 - Release SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
+ *  will also specify which port we're releasing the lock for.
+ **/
+void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+
+	DEBUGFUNC("e1000_release_swfw_sync_i210");
+
+	while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS)
+		; /* Empty */
+
+	swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
+
+	e1000_put_hw_semaphore_generic(hw);
+}
+
+/**
+ *  e1000_get_hw_semaphore_i210 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw)
+{
+	u32 swsm;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	DEBUGFUNC("e1000_get_hw_semaphore_i210");
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = E1000_READ_REG(hw, E1000_SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		usec_delay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		/* In rare circumstances, the SW semaphore may already be held
+		 * unintentionally. Clear the semaphore once before giving up.
+		 */
+		if (hw->dev_spec._82575.clear_semaphore_once) {
+			hw->dev_spec._82575.clear_semaphore_once = false;
+			e1000_put_hw_semaphore_generic(hw);
+			for (i = 0; i < timeout; i++) {
+				swsm = E1000_READ_REG(hw, E1000_SWSM);
+				if (!(swsm & E1000_SWSM_SMBI))
+					break;
+
+				usec_delay(50);
+			}
+		}
+
+		/* If we do not have the semaphore here, we have to give up. */
+		if (i == timeout) {
+			DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+			return -E1000_ERR_NVM;
+		}
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = E1000_READ_REG(hw, E1000_SWSM);
+		E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
+			break;
+
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		e1000_put_hw_semaphore_generic(hw);
+		DEBUGOUT("Driver can't access the NVM\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the Shadow Ram to read
+ *  @words: number of words to read
+ *  @data: word read from the Shadow Ram
+ *
+ *  Reads a 16 bit word from the Shadow Ram using the EERD register.
+ *  Uses necessary synchronization semaphores.
+ **/
+s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
+			     u16 *data)
+{
+	s32 status = E1000_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("e1000_read_nvm_srrd_i210");
+
+	/* We cannot hold synchronization semaphores for too long,
+	 * because of forceful takeover procedure. However it is more efficient
+	 * to read in bursts than synchronizing access for each word. */
+	for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+		count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+			E1000_EERD_EEWR_MAX_COUNT : (words - i);
+		if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+			status = e1000_read_nvm_eerd(hw, offset, count,
+						     data + i);
+			hw->nvm.ops.release(hw);
+		} else {
+			status = E1000_ERR_SWFW_SYNC;
+		}
+
+		if (status != E1000_SUCCESS)
+			break;
+	}
+
+	return status;
+}
+
+/**
+ *  e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the Shadow RAM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ *  Writes data to Shadow RAM at offset using EEWR register.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  data will not be committed to FLASH and also Shadow RAM will most likely
+ *  contain an invalid checksum.
+ *
+ *  If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ *  partially written.
+ **/
+s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	s32 status = E1000_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("e1000_write_nvm_srwr_i210");
+
+	/* We cannot hold synchronization semaphores for too long,
+	 * because of forceful takeover procedure. However it is more efficient
+	 * to write in bursts than synchronizing access for each word. */
+	for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+		count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+			E1000_EERD_EEWR_MAX_COUNT : (words - i);
+		if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+			status = e1000_write_nvm_srwr(hw, offset, count,
+						      data + i);
+			hw->nvm.ops.release(hw);
+		} else {
+			status = E1000_ERR_SWFW_SYNC;
+		}
+
+		if (status != E1000_SUCCESS)
+			break;
+	}
+
+	return status;
+}
+
+/**
+ *  e1000_write_nvm_srwr - Write to Shadow Ram using EEWR
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the Shadow Ram to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the Shadow Ram
+ *
+ *  Writes data to Shadow Ram at offset using EEWR register.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  Shadow Ram will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+				u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, k, eewr = 0;
+	u32 attempts = 100000;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_write_nvm_srwr");
+
+	/*
+	 * A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+			(data[i] << E1000_NVM_RW_REG_DATA) |
+			E1000_NVM_RW_REG_START;
+
+		E1000_WRITE_REG(hw, E1000_SRWR, eewr);
+
+		for (k = 0; k < attempts; k++) {
+			if (E1000_NVM_RW_REG_DONE &
+			    E1000_READ_REG(hw, E1000_SRWR)) {
+				ret_val = E1000_SUCCESS;
+				break;
+			}
+			usec_delay(5);
+		}
+
+		if (ret_val != E1000_SUCCESS) {
+			DEBUGOUT("Shadow RAM write EEWR timed out\n");
+			break;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/** e1000_read_invm_word_i210 - Reads OTP
+ *  @hw: pointer to the HW structure
+ *  @address: the word address (aka eeprom offset) to read
+ *  @data: pointer to the data read
+ *
+ *  Reads 16-bit words from the OTP. Return error when the word is not
+ *  stored in OTP.
+ **/
+static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
+{
+	s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+	u32 invm_dword;
+	u16 i;
+	u8 record_type, word_address;
+
+	DEBUGFUNC("e1000_read_invm_word_i210");
+
+	for (i = 0; i < E1000_INVM_SIZE; i++) {
+		invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i));
+		/* Get record type */
+		record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
+		if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
+			break;
+		if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
+			i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
+		if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
+			i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
+		if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
+			word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
+			if (word_address == address) {
+				*data = INVM_DWORD_TO_WORD_DATA(invm_dword);
+				DEBUGOUT2("Read INVM Word 0x%02x = %x",
+					  address, *data);
+				status = E1000_SUCCESS;
+				break;
+			}
+		}
+	}
+	if (status != E1000_SUCCESS)
+		DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address);
+	return status;
+}
+
+/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211
+ *  @hw: pointer to the HW structure
+ *  @address: the word address (aka eeprom offset) to read
+ *  @data: pointer to the data read
+ *
+ *  Wrapper function to return data formerly found in the NVM.
+ **/
+static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset,
+				u16 E1000_UNUSEDARG words, u16 *data)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_read_invm_i210");
+
+	/* Only the MAC addr is required to be present in the iNVM */
+	switch (offset) {
+	case NVM_MAC_ADDR:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]);
+		ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1,
+						     &data[1]);
+		ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2,
+						     &data[2]);
+		if (ret_val != E1000_SUCCESS)
+			DEBUGOUT("MAC Addr not found in iNVM\n");
+		break;
+	case NVM_INIT_CTRL_2:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
+		if (ret_val != E1000_SUCCESS) {
+			*data = NVM_INIT_CTRL_2_DEFAULT_I211;
+			ret_val = E1000_SUCCESS;
+		}
+		break;
+	case NVM_INIT_CTRL_4:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
+		if (ret_val != E1000_SUCCESS) {
+			*data = NVM_INIT_CTRL_4_DEFAULT_I211;
+			ret_val = E1000_SUCCESS;
+		}
+		break;
+	case NVM_LED_1_CFG:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
+		if (ret_val != E1000_SUCCESS) {
+			*data = NVM_LED_1_CFG_DEFAULT_I211;
+			ret_val = E1000_SUCCESS;
+		}
+		break;
+	case NVM_LED_0_2_CFG:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
+		if (ret_val != E1000_SUCCESS) {
+			*data = NVM_LED_0_2_CFG_DEFAULT_I211;
+			ret_val = E1000_SUCCESS;
+		}
+		break;
+	case NVM_ID_LED_SETTINGS:
+		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
+		if (ret_val != E1000_SUCCESS) {
+			*data = ID_LED_RESERVED_FFFF;
+			ret_val = E1000_SUCCESS;
+		}
+		break;
+	case NVM_SUB_DEV_ID:
+		*data = hw->subsystem_device_id;
+		break;
+	case NVM_SUB_VEN_ID:
+		*data = hw->subsystem_vendor_id;
+		break;
+	case NVM_DEV_ID:
+		*data = hw->device_id;
+		break;
+	case NVM_VEN_ID:
+		*data = hw->vendor_id;
+		break;
+	default:
+		DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset);
+		*data = NVM_RESERVED_WORD;
+		break;
+	}
+	return ret_val;
+}
+
+/**
+ *  e1000_read_invm_version - Reads iNVM version and image type
+ *  @hw: pointer to the HW structure
+ *  @invm_ver: version structure for the version read
+ *
+ *  Reads iNVM version and image type.
+ **/
+s32 e1000_read_invm_version(struct e1000_hw *hw,
+			    struct e1000_fw_version *invm_ver)
+{
+	u32 *record = NULL;
+	u32 *next_record = NULL;
+	u32 i = 0;
+	u32 invm_dword = 0;
+	u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
+					     E1000_INVM_RECORD_SIZE_IN_BYTES);
+	u32 buffer[E1000_INVM_SIZE];
+	s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+	u16 version = 0;
+
+	DEBUGFUNC("e1000_read_invm_version");
+
+	/* Read iNVM memory */
+	for (i = 0; i < E1000_INVM_SIZE; i++) {
+		invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i));
+		buffer[i] = invm_dword;
+	}
+
+	/* Read version number */
+	for (i = 1; i < invm_blocks; i++) {
+		record = &buffer[invm_blocks - i];
+		next_record = &buffer[invm_blocks - i + 1];
+
+		/* Check if we have first version location used */
+		if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
+			version = 0;
+			status = E1000_SUCCESS;
+			break;
+		}
+		/* Check if we have second version location used */
+		else if ((i == 1) &&
+			 ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
+			version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+			status = E1000_SUCCESS;
+			break;
+		}
+		/*
+		 * Check if we have odd version location
+		 * used and it is the last one used
+		 */
+		else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&
+			 ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
+			 (i != 1))) {
+			version = (*next_record & E1000_INVM_VER_FIELD_TWO)
+				  >> 13;
+			status = E1000_SUCCESS;
+			break;
+		}
+		/*
+		 * Check if we have even version location
+		 * used and it is the last one used
+		 */
+		else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) &&
+			 ((*record & 0x3) == 0)) {
+			version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+			status = E1000_SUCCESS;
+			break;
+		}
+	}
+
+	if (status == E1000_SUCCESS) {
+		invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK)
+					>> E1000_INVM_MAJOR_SHIFT;
+		invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK;
+	}
+	/* Read Image Type */
+	for (i = 1; i < invm_blocks; i++) {
+		record = &buffer[invm_blocks - i];
+		next_record = &buffer[invm_blocks - i + 1];
+
+		/* Check if we have image type in first location used */
+		if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) {
+			invm_ver->invm_img_type = 0;
+			status = E1000_SUCCESS;
+			break;
+		}
+		/* Check if we have image type in first location used */
+		else if ((((*record & 0x3) == 0) &&
+			 ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) ||
+			 ((((*record & 0x3) != 0) && (i != 1)))) {
+			invm_ver->invm_img_type =
+				(*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23;
+			status = E1000_SUCCESS;
+			break;
+		}
+	}
+	return status;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_i210");
+
+	if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+
+		/*
+		 * Replace the read function with semaphore grabbing with
+		 * the one that skips this for a while.
+		 * We have semaphore taken already here.
+		 */
+		read_op_ptr = hw->nvm.ops.read;
+		hw->nvm.ops.read = e1000_read_nvm_eerd;
+
+		status = e1000_validate_nvm_checksum_generic(hw);
+
+		/* Revert original read operation. */
+		hw->nvm.ops.read = read_op_ptr;
+
+		hw->nvm.ops.release(hw);
+	} else {
+		status = E1000_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+
+/**
+ *  e1000_update_nvm_checksum_i210 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM. Next commit EEPROM data onto the Flash.
+ **/
+s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_update_nvm_checksum_i210");
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data);
+	if (ret_val != E1000_SUCCESS) {
+		DEBUGOUT("EEPROM read failed\n");
+		goto out;
+	}
+
+	if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+		/*
+		 * Do not use hw->nvm.ops.write, hw->nvm.ops.read
+		 * because we do not want to take the synchronization
+		 * semaphores twice here.
+		 */
+
+		for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+			ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data);
+			if (ret_val) {
+				hw->nvm.ops.release(hw);
+				DEBUGOUT("NVM Read Error while updating checksum.\n");
+				goto out;
+			}
+			checksum += nvm_data;
+		}
+		checksum = (u16) NVM_SUM - checksum;
+		ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
+						&checksum);
+		if (ret_val != E1000_SUCCESS) {
+			hw->nvm.ops.release(hw);
+			DEBUGOUT("NVM Write Error while updating checksum.\n");
+			goto out;
+		}
+
+		hw->nvm.ops.release(hw);
+
+		ret_val = e1000_update_flash_i210(hw);
+	} else {
+		ret_val = E1000_ERR_SWFW_SYNC;
+	}
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_flash_presence_i210 - Check if flash device is detected.
+ *  @hw: pointer to the HW structure
+ *
+ **/
+bool e1000_get_flash_presence_i210(struct e1000_hw *hw)
+{
+	u32 eec = 0;
+	bool ret_val = false;
+
+	DEBUGFUNC("e1000_get_flash_presence_i210");
+
+	eec = E1000_READ_REG(hw, E1000_EECD);
+
+	if (eec & E1000_EECD_FLASH_DETECTED_I210)
+		ret_val = true;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_update_flash_i210 - Commit EEPROM to the flash
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 e1000_update_flash_i210(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u32 flup;
+
+	DEBUGFUNC("e1000_update_flash_i210");
+
+	ret_val = e1000_pool_flash_update_done_i210(hw);
+	if (ret_val == -E1000_ERR_NVM) {
+		DEBUGOUT("Flash update time out\n");
+		goto out;
+	}
+
+	flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210;
+	E1000_WRITE_REG(hw, E1000_EECD, flup);
+
+	ret_val = e1000_pool_flash_update_done_i210(hw);
+	if (ret_val == E1000_SUCCESS)
+		DEBUGOUT("Flash update complete\n");
+	else
+		DEBUGOUT("Flash update time out\n");
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_pool_flash_update_done_i210 - Pool FLUDONE status.
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_NVM;
+	u32 i, reg;
+
+	DEBUGFUNC("e1000_pool_flash_update_done_i210");
+
+	for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
+		reg = E1000_READ_REG(hw, E1000_EECD);
+		if (reg & E1000_EECD_FLUDONE_I210) {
+			ret_val = E1000_SUCCESS;
+			break;
+		}
+		usec_delay(5);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize the i210/i211 NVM parameters and function pointers.
+ **/
+static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	struct e1000_nvm_info *nvm = &hw->nvm;
+
+	DEBUGFUNC("e1000_init_nvm_params_i210");
+
+	ret_val = e1000_init_nvm_params_82575(hw);
+	nvm->ops.acquire = e1000_acquire_nvm_i210;
+	nvm->ops.release = e1000_release_nvm_i210;
+	nvm->ops.valid_led_default = e1000_valid_led_default_i210;
+	if (e1000_get_flash_presence_i210(hw)) {
+		hw->nvm.type = e1000_nvm_flash_hw;
+		nvm->ops.read    = e1000_read_nvm_srrd_i210;
+		nvm->ops.write   = e1000_write_nvm_srwr_i210;
+		nvm->ops.validate = e1000_validate_nvm_checksum_i210;
+		nvm->ops.update   = e1000_update_nvm_checksum_i210;
+	} else {
+		hw->nvm.type = e1000_nvm_invm;
+		nvm->ops.read     = e1000_read_invm_i210;
+		nvm->ops.write    = e1000_null_write_nvm;
+		nvm->ops.validate = e1000_null_ops_generic;
+		nvm->ops.update   = e1000_null_ops_generic;
+	}
+	return ret_val;
+}
+
+/**
+ *  e1000_init_function_pointers_i210 - Init func ptrs.
+ *  @hw: pointer to the HW structure
+ *
+ *  Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_i210(struct e1000_hw *hw)
+{
+	e1000_init_function_pointers_82575(hw);
+	hw->nvm.ops.init_params = e1000_init_nvm_params_i210;
+
+	return;
+}
+
+/**
+ *  e1000_valid_led_default_i210 - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_valid_led_default_i210");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+		switch (hw->phy.media_type) {
+		case e1000_media_type_internal_serdes:
+			*data = ID_LED_DEFAULT_I210_SERDES;
+			break;
+		case e1000_media_type_copper:
+		default:
+			*data = ID_LED_DEFAULT_I210;
+			break;
+		}
+	}
+out:
+	return ret_val;
+}
+
+/**
+ *  __e1000_access_xmdio_reg - Read/write XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @address: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: pointer to value to read/write from/to the XMDIO address
+ *  @read: boolean flag to indicate read or write
+ **/
+static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address,
+				    u8 dev_addr, u16 *data, bool read)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("__e1000_access_xmdio_reg");
+
+	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
+							 dev_addr);
+	if (ret_val)
+		return ret_val;
+
+	if (read)
+		ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
+	else
+		ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
+	if (ret_val)
+		return ret_val;
+
+	/* Recalibrate the device back to 0 */
+	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
+	if (ret_val)
+		return ret_val;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_xmdio_reg - Read XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @addr: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: value to be read from the EMI address
+ **/
+s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
+{
+	DEBUGFUNC("e1000_read_xmdio_reg");
+
+	return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true);
+}
+
+/**
+ *  e1000_write_xmdio_reg - Write XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @addr: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: value to be written to the XMDIO address
+ **/
+s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
+{
+	DEBUGFUNC("e1000_read_xmdio_reg");
+
+	return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false);
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.h b/kernel/linux/kni/ethtool/igb/e1000_i210.h
new file mode 100644
index 0000000..9df7c20
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_i210.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_I210_H_
+#define _E1000_I210_H_
+
+bool e1000_get_flash_presence_i210(struct e1000_hw *hw);
+s32 e1000_update_flash_i210(struct e1000_hw *hw);
+s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw);
+s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw);
+s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset,
+			      u16 words, u16 *data);
+s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset,
+			     u16 words, u16 *data);
+s32 e1000_read_invm_version(struct e1000_hw *hw,
+			    struct e1000_fw_version *invm_ver);
+s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
+			 u16 *data);
+s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
+			  u16 data);
+
+#define E1000_STM_OPCODE		0xDB00
+#define E1000_EEPROM_FLASH_SIZE_WORD	0x11
+
+#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
+	(u8)((invm_dword) & 0x7)
+#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
+	(u8)(((invm_dword) & 0x0000FE00) >> 9)
+#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
+	(u16)(((invm_dword) & 0xFFFF0000) >> 16)
+
+enum E1000_INVM_STRUCTURE_TYPE {
+	E1000_INVM_UNINITIALIZED_STRUCTURE		= 0x00,
+	E1000_INVM_WORD_AUTOLOAD_STRUCTURE		= 0x01,
+	E1000_INVM_CSR_AUTOLOAD_STRUCTURE		= 0x02,
+	E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE	= 0x03,
+	E1000_INVM_RSA_KEY_SHA256_STRUCTURE		= 0x04,
+	E1000_INVM_INVALIDATED_STRUCTURE		= 0x0F,
+};
+
+#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS	8
+#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS	1
+#define E1000_INVM_ULT_BYTES_SIZE	8
+#define E1000_INVM_RECORD_SIZE_IN_BYTES	4
+#define E1000_INVM_VER_FIELD_ONE	0x1FF8
+#define E1000_INVM_VER_FIELD_TWO	0x7FE000
+#define E1000_INVM_IMGTYPE_FIELD	0x1F800000
+
+#define E1000_INVM_MAJOR_MASK	0x3F0
+#define E1000_INVM_MINOR_MASK	0xF
+#define E1000_INVM_MAJOR_SHIFT	4
+
+#define ID_LED_DEFAULT_I210		((ID_LED_OFF1_ON2  << 8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_OFF2))
+#define ID_LED_DEFAULT_I210_SERDES	((ID_LED_DEF1_DEF2 << 8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_ON2))
+
+/* NVM offset defaults for I211 devices */
+#define NVM_INIT_CTRL_2_DEFAULT_I211	0X7243
+#define NVM_INIT_CTRL_4_DEFAULT_I211	0x00C1
+#define NVM_LED_1_CFG_DEFAULT_I211	0x0184
+#define NVM_LED_0_2_CFG_DEFAULT_I211	0x200C
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.c b/kernel/linux/kni/ethtool/igb/e1000_mac.c
new file mode 100644
index 0000000..13a4226
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_mac.c
@@ -0,0 +1,2081 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw);
+static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+static void e1000_config_collision_dist_generic(struct e1000_hw *hw);
+static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index);
+
+/**
+ *  e1000_init_mac_ops_generic - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void e1000_init_mac_ops_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	DEBUGFUNC("e1000_init_mac_ops_generic");
+
+	/* General Setup */
+	mac->ops.init_params = e1000_null_ops_generic;
+	mac->ops.init_hw = e1000_null_ops_generic;
+	mac->ops.reset_hw = e1000_null_ops_generic;
+	mac->ops.setup_physical_interface = e1000_null_ops_generic;
+	mac->ops.get_bus_info = e1000_null_ops_generic;
+	mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie;
+	mac->ops.read_mac_addr = e1000_read_mac_addr_generic;
+	mac->ops.config_collision_dist = e1000_config_collision_dist_generic;
+	mac->ops.clear_hw_cntrs = e1000_null_mac_generic;
+	/* LED */
+	mac->ops.cleanup_led = e1000_null_ops_generic;
+	mac->ops.setup_led = e1000_null_ops_generic;
+	mac->ops.blink_led = e1000_null_ops_generic;
+	mac->ops.led_on = e1000_null_ops_generic;
+	mac->ops.led_off = e1000_null_ops_generic;
+	/* LINK */
+	mac->ops.setup_link = e1000_null_ops_generic;
+	mac->ops.get_link_up_info = e1000_null_link_info;
+	mac->ops.check_for_link = e1000_null_ops_generic;
+	/* Management */
+	mac->ops.check_mng_mode = e1000_null_mng_mode;
+	/* VLAN, MC, etc. */
+	mac->ops.update_mc_addr_list = e1000_null_update_mc;
+	mac->ops.clear_vfta = e1000_null_mac_generic;
+	mac->ops.write_vfta = e1000_null_write_vfta;
+	mac->ops.rar_set = e1000_rar_set_generic;
+	mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic;
+}
+
+/**
+ *  e1000_null_ops_generic - No-op function, returns 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_ops_generic");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_mac_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_mac_generic");
+	return;
+}
+
+/**
+ *  e1000_null_link_info - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw,
+			 u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d)
+{
+	DEBUGFUNC("e1000_null_link_info");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_mng_mode - No-op function, return false
+ *  @hw: pointer to the HW structure
+ **/
+bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_mng_mode");
+	return false;
+}
+
+/**
+ *  e1000_null_update_mc - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw,
+			  u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a)
+{
+	DEBUGFUNC("e1000_null_update_mc");
+	return;
+}
+
+/**
+ *  e1000_null_write_vfta - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw,
+			   u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b)
+{
+	DEBUGFUNC("e1000_null_write_vfta");
+	return;
+}
+
+/**
+ *  e1000_null_rar_set - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw,
+			u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a)
+{
+	DEBUGFUNC("e1000_null_rar_set");
+	return;
+}
+
+/**
+ *  e1000_get_bus_info_pcie_generic - Get PCIe bus information
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines and stores the system bus information for a particular
+ *  network interface.  The following bus information is determined and stored:
+ *  bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_bus_info *bus = &hw->bus;
+	s32 ret_val;
+	u16 pcie_link_status;
+
+	DEBUGFUNC("e1000_get_bus_info_pcie_generic");
+
+	bus->type = e1000_bus_type_pci_express;
+
+	ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS,
+					  &pcie_link_status);
+	if (ret_val) {
+		bus->width = e1000_bus_width_unknown;
+		bus->speed = e1000_bus_speed_unknown;
+	} else {
+		switch (pcie_link_status & PCIE_LINK_SPEED_MASK) {
+		case PCIE_LINK_SPEED_2500:
+			bus->speed = e1000_bus_speed_2500;
+			break;
+		case PCIE_LINK_SPEED_5000:
+			bus->speed = e1000_bus_speed_5000;
+			break;
+		default:
+			bus->speed = e1000_bus_speed_unknown;
+			break;
+		}
+
+		bus->width = (enum e1000_bus_width)((pcie_link_status &
+			      PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT);
+	}
+
+	mac->ops.set_lan_id(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	/* The status register reports the correct function number
+	 * for the device regardless of function swap state.
+	 */
+	reg = E1000_READ_REG(hw, E1000_STATUS);
+	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+}
+
+/**
+ *  e1000_set_lan_id_single_port - Set LAN id for a single port device
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the LAN function id to zero for a single port device.
+ **/
+void e1000_set_lan_id_single_port(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+
+	bus->func = 0;
+}
+
+/**
+ *  e1000_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void e1000_clear_vfta_generic(struct e1000_hw *hw)
+{
+	u32 offset;
+
+	DEBUGFUNC("e1000_clear_vfta_generic");
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+		E1000_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  e1000_write_vfta_generic - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	DEBUGFUNC("e1000_write_vfta_generic");
+
+	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_init_rx_addrs_generic - Initialize receive address's
+ *  @hw: pointer to the HW structure
+ *  @rar_count: receive address registers
+ *
+ *  Setup the receive address registers by setting the base receive address
+ *  register to the devices MAC address and clearing all the other receive
+ *  address registers to 0.
+ **/
+void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count)
+{
+	u32 i;
+	u8 mac_addr[ETH_ADDR_LEN] = {0};
+
+	DEBUGFUNC("e1000_init_rx_addrs_generic");
+
+	/* Setup the receive address */
+	DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+	/* Zero out the other (rar_entry_count - 1) receive addresses */
+	DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1);
+	for (i = 1; i < rar_count; i++)
+		hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ *  e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the nvm for an alternate MAC address.  An alternate MAC address
+ *  can be setup by pre-boot software and must be treated like a permanent
+ *  address and must override the actual permanent MAC address. If an
+ *  alternate MAC address is found it is programmed into RAR0, replacing
+ *  the permanent address that was installed into RAR0 by the Si on reset.
+ *  This function will return SUCCESS unless it encounters an error while
+ *  reading the EEPROM.
+ **/
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 i;
+	s32 ret_val;
+	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+	u8 alt_mac_addr[ETH_ADDR_LEN];
+
+	DEBUGFUNC("e1000_check_alt_mac_addr_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data);
+	if (ret_val)
+		return ret_val;
+
+
+	/* Alternate MAC address is handled by the option ROM for 82580
+	 * and newer. SW support not required.
+	 */
+	if (hw->mac.type >= e1000_82580)
+		return E1000_SUCCESS;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+				   &nvm_alt_mac_addr_offset);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+	    (nvm_alt_mac_addr_offset == 0x0000))
+		/* There is no Alternate MAC Address */
+		return E1000_SUCCESS;
+
+	if (hw->bus.func == E1000_FUNC_1)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+	if (hw->bus.func == E1000_FUNC_2)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2;
+
+	if (hw->bus.func == E1000_FUNC_3)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3;
+	for (i = 0; i < ETH_ADDR_LEN; i += 2) {
+		offset = nvm_alt_mac_addr_offset + (i >> 1);
+		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+
+		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+	}
+
+	/* if multicast bit is set, the alternate address will not be used */
+	if (alt_mac_addr[0] & 0x01) {
+		DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");
+		return E1000_SUCCESS;
+	}
+
+	/* We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_rar_set_generic - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.
+ **/
+static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	DEBUGFUNC("e1000_rar_set_generic");
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+		   ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	/* Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
+	E1000_WRITE_REG(hw, E1000_RAL(index), rar_low);
+	E1000_WRITE_FLUSH(hw);
+	E1000_WRITE_REG(hw, E1000_RAH(index), rar_high);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_hash_mc_addr_generic - Generate a multicast hash value
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: pointer to a multicast address
+ *
+ *  Generates a multicast address hash value which is used to determine
+ *  the multicast filter table array address and new table value.
+ **/
+u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr)
+{
+	u32 hash_value, hash_mask;
+	u8 bit_shift = 0;
+
+	DEBUGFUNC("e1000_hash_mc_addr_generic");
+
+	/* Register count multiplied by bits per register */
+	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+	/* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+	 * where 0xFF would still fall within the hash mask.
+	 */
+	while (hash_mask >> bit_shift != 0xFF)
+		bit_shift++;
+
+	/* The portion of the address that is used for the hash table
+	 * is determined by the mc_filter_type setting.
+	 * The algorithm is such that there is a total of 8 bits of shifting.
+	 * The bit_shift for a mc_filter_type of 0 represents the number of
+	 * left-shifts where the MSB of mc_addr[5] would still fall within
+	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
+	 * of 8 bits of shifting, then mc_addr[4] will shift right the
+	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
+	 * cases are a variation of this algorithm...essentially raising the
+	 * number of bits to shift mc_addr[5] left, while still keeping the
+	 * 8-bit shifting total.
+	 *
+	 * For example, given the following Destination MAC Address and an
+	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+	 * we can see that the bit_shift for case 0 is 4.  These are the hash
+	 * values resulting from each mc_filter_type...
+	 * [0] [1] [2] [3] [4] [5]
+	 * 01  AA  00  12  34  56
+	 * LSB		 MSB
+	 *
+	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+	 */
+	switch (hw->mac.mc_filter_type) {
+	default:
+	case 0:
+		break;
+	case 1:
+		bit_shift += 1;
+		break;
+	case 2:
+		bit_shift += 2;
+		break;
+	case 3:
+		bit_shift += 4;
+		break;
+	}
+
+	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+				  (((u16) mc_addr[5]) << bit_shift)));
+
+	return hash_value;
+}
+
+/**
+ *  e1000_update_mc_addr_list_generic - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates entire Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
+				       u8 *mc_addr_list, u32 mc_addr_count)
+{
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
+
+	DEBUGFUNC("e1000_update_mc_addr_list_generic");
+
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32) i < mc_addr_count; i++) {
+		hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list);
+
+		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+		hash_bit = hash_value & 0x1F;
+
+		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+		mc_addr_list += (ETH_ADDR_LEN);
+	}
+
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_clear_hw_cntrs_base_generic - Clear base hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the base hardware counters by reading the counter registers.
+ **/
+void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_clear_hw_cntrs_base_generic");
+
+	E1000_READ_REG(hw, E1000_CRCERRS);
+	E1000_READ_REG(hw, E1000_SYMERRS);
+	E1000_READ_REG(hw, E1000_MPC);
+	E1000_READ_REG(hw, E1000_SCC);
+	E1000_READ_REG(hw, E1000_ECOL);
+	E1000_READ_REG(hw, E1000_MCC);
+	E1000_READ_REG(hw, E1000_LATECOL);
+	E1000_READ_REG(hw, E1000_COLC);
+	E1000_READ_REG(hw, E1000_DC);
+	E1000_READ_REG(hw, E1000_SEC);
+	E1000_READ_REG(hw, E1000_RLEC);
+	E1000_READ_REG(hw, E1000_XONRXC);
+	E1000_READ_REG(hw, E1000_XONTXC);
+	E1000_READ_REG(hw, E1000_XOFFRXC);
+	E1000_READ_REG(hw, E1000_XOFFTXC);
+	E1000_READ_REG(hw, E1000_FCRUC);
+	E1000_READ_REG(hw, E1000_GPRC);
+	E1000_READ_REG(hw, E1000_BPRC);
+	E1000_READ_REG(hw, E1000_MPRC);
+	E1000_READ_REG(hw, E1000_GPTC);
+	E1000_READ_REG(hw, E1000_GORCL);
+	E1000_READ_REG(hw, E1000_GORCH);
+	E1000_READ_REG(hw, E1000_GOTCL);
+	E1000_READ_REG(hw, E1000_GOTCH);
+	E1000_READ_REG(hw, E1000_RNBC);
+	E1000_READ_REG(hw, E1000_RUC);
+	E1000_READ_REG(hw, E1000_RFC);
+	E1000_READ_REG(hw, E1000_ROC);
+	E1000_READ_REG(hw, E1000_RJC);
+	E1000_READ_REG(hw, E1000_TORL);
+	E1000_READ_REG(hw, E1000_TORH);
+	E1000_READ_REG(hw, E1000_TOTL);
+	E1000_READ_REG(hw, E1000_TOTH);
+	E1000_READ_REG(hw, E1000_TPR);
+	E1000_READ_REG(hw, E1000_TPT);
+	E1000_READ_REG(hw, E1000_MPTC);
+	E1000_READ_REG(hw, E1000_BPTC);
+}
+
+/**
+ *  e1000_check_for_copper_link_generic - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	DEBUGFUNC("e1000_check_for_copper_link");
+
+	/* We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status)
+		return E1000_SUCCESS;
+
+	/* First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link)
+		return E1000_SUCCESS; /* No link detected */
+
+	mac->get_link_status = false;
+
+	/* Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000_check_downshift_generic(hw);
+
+	/* If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		return -E1000_ERR_CONFIG;
+
+	/* Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+
+	/* Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000_config_fc_after_link_up_generic(hw);
+	if (ret_val)
+		DEBUGOUT("Error configuring flow control\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_fiber_link_generic - Check for link (Fiber)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_check_for_fiber_link_generic");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	status = E1000_READ_REG(hw, E1000_STATUS);
+	rxcw = E1000_READ_REG(hw, E1000_RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), the cable is plugged in (we have signal),
+	 * and our link partner is not trying to auto-negotiate with us (we
+	 * are receiving idles or data), we need to force link up. We also
+	 * need to give auto-negotiation time to complete, in case the cable
+	 * was just plugged in. The autoneg_failed flag does this.
+	 */
+	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+	if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) &&
+	    !(rxcw & E1000_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return E1000_SUCCESS;
+		}
+		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = E1000_READ_REG(hw, E1000_CTRL);
+		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = e1000_config_fc_after_link_up_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
+		E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_check_for_serdes_link_generic");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	status = E1000_READ_REG(hw, E1000_STATUS);
+	rxcw = E1000_READ_REG(hw, E1000_RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), and our link partner is not trying to
+	 * auto-negotiate with us (we are receiving idles or data),
+	 * we need to force link up. We also need to give auto-negotiation
+	 * time to complete.
+	 */
+	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+	if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return E1000_SUCCESS;
+		}
+		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = E1000_READ_REG(hw, E1000_CTRL);
+		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = e1000_config_fc_after_link_up_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
+		E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	} else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) {
+		/* If we force link for non-auto-negotiation switch, check
+		 * link status based on MAC synchronization for internal
+		 * serdes media type.
+		 */
+		/* SYNCH bit and IV bit are sticky. */
+		usec_delay(10);
+		rxcw = E1000_READ_REG(hw, E1000_RXCW);
+		if (rxcw & E1000_RXCW_SYNCH) {
+			if (!(rxcw & E1000_RXCW_IV)) {
+				mac->serdes_has_link = true;
+				DEBUGOUT("SERDES: Link up - forced.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - force failed.\n");
+		}
+	}
+
+	if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) {
+		status = E1000_READ_REG(hw, E1000_STATUS);
+		if (status & E1000_STATUS_LU) {
+			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
+			usec_delay(10);
+			rxcw = E1000_READ_REG(hw, E1000_RXCW);
+			if (rxcw & E1000_RXCW_SYNCH) {
+				if (!(rxcw & E1000_RXCW_IV)) {
+					mac->serdes_has_link = true;
+					DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");
+				} else {
+					mac->serdes_has_link = false;
+					DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");
+				}
+			} else {
+				mac->serdes_has_link = false;
+				DEBUGOUT("SERDES: Link down - no sync.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - autoneg failed\n");
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_set_default_fc_generic - Set flow control default values
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the EEPROM for the default values for flow control and store the
+ *  values.
+ **/
+static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 nvm_data;
+
+	DEBUGFUNC("e1000_set_default_fc_generic");
+
+	/* Read and store word 0x0F of the EEPROM. This word contains bits
+	 * that determine the hardware's default PAUSE (flow control) mode,
+	 * a bit that determines whether the HW defaults to enabling or
+	 * disabling auto-negotiation, and the direction of the
+	 * SW defined pins. If there is no SW over-ride of the flow
+	 * control setting, then the variable hw->fc will
+	 * be initialized based on a value in the EEPROM.
+	 */
+	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
+		hw->fc.requested_mode = e1000_fc_none;
+	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+		 NVM_WORD0F_ASM_DIR)
+		hw->fc.requested_mode = e1000_fc_tx_pause;
+	else
+		hw->fc.requested_mode = e1000_fc_full;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_setup_link_generic - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+s32 e1000_setup_link_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_setup_link_generic");
+
+	/* In the case of the phy reset being blocked, we already have a link.
+	 * We do not need to set it up again.
+	 */
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
+		return E1000_SUCCESS;
+
+	/* If requested flow control is set to default, set flow control
+	 * based on the EEPROM flow control settings.
+	 */
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		ret_val = e1000_set_default_fc_generic(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Save off the requested flow control mode for use later.  Depending
+	 * on the link partner's capabilities, we may or may not use this mode.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+
+	DEBUGOUT1("After fix-ups FlowControl is now = %x\n",
+		hw->fc.current_mode);
+
+	/* Call the necessary media_type subroutine to configure the link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Initialize the flow control address, type, and PAUSE timer
+	 * registers to their default values.  This is done even if flow
+	 * control is disabled, because it does not hurt anything to
+	 * initialize these registers.
+	 */
+	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
+	E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE);
+	E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+	E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+	E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time);
+
+	return e1000_set_fc_watermarks_generic(hw);
+}
+
+/**
+ *  e1000_commit_fc_settings_generic - Configure flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  Write the flow control settings to the Transmit Config Word Register (TXCW)
+ *  base on the flow control settings in e1000_mac_info.
+ **/
+static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 txcw;
+
+	DEBUGFUNC("e1000_commit_fc_settings_generic");
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the device accordingly.  If auto-negotiation is enabled, then
+	 * software will have to set the "PAUSE" bits to the correct value in
+	 * the Transmit Config Word Register (TXCW) and re-start auto-
+	 * negotiation.  However, if auto-negotiation is disabled, then
+	 * software will have to manually configure the two flow control enable
+	 * bits in the CTRL register.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames,
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames but we
+	 *          do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 */
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		/* Flow control completely disabled by a software over-ride. */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+		break;
+	case e1000_fc_rx_pause:
+		/* Rx Flow control is enabled and Tx Flow control is disabled
+		 * by a software over-ride. Since there really isn't a way to
+		 * advertise that we are capable of Rx Pause ONLY, we will
+		 * advertise that we support both symmetric and asymmetric Rx
+		 * PAUSE.  Later, we will disable the adapter's ability to send
+		 * PAUSE frames.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	case e1000_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is disabled,
+		 * by a software over-ride.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+		break;
+	case e1000_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+		break;
+	}
+
+	E1000_WRITE_REG(hw, E1000_TXCW, txcw);
+	mac->txcw = txcw;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_poll_fiber_serdes_link_generic - Poll for link up
+ *  @hw: pointer to the HW structure
+ *
+ *  Polls for link up by reading the status register, if link fails to come
+ *  up with auto-negotiation, then the link is forced if a signal is detected.
+ **/
+static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 i, status;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_poll_fiber_serdes_link_generic");
+
+	/* If we have a signal (the cable is plugged in, or assumed true for
+	 * serdes media) then poll for a "Link-Up" indication in the Device
+	 * Status Register.  Time-out if a link isn't seen in 500 milliseconds
+	 * seconds (Auto-negotiation should complete in less than 500
+	 * milliseconds even if the other end is doing it in SW).
+	 */
+	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
+		msec_delay(10);
+		status = E1000_READ_REG(hw, E1000_STATUS);
+		if (status & E1000_STATUS_LU)
+			break;
+	}
+	if (i == FIBER_LINK_UP_LIMIT) {
+		DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+		mac->autoneg_failed = true;
+		/* AutoNeg failed to achieve a link, so we'll call
+		 * mac->check_for_link. This routine will force the
+		 * link up if we detect a signal. This will allow us to
+		 * communicate with non-autonegotiating link partners.
+		 */
+		ret_val = mac->ops.check_for_link(hw);
+		if (ret_val) {
+			DEBUGOUT("Error while checking for link\n");
+			return ret_val;
+		}
+		mac->autoneg_failed = false;
+	} else {
+		mac->autoneg_failed = false;
+		DEBUGOUT("Valid Link Found\n");
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures collision distance and flow control for fiber and serdes
+ *  links.  Upon successful setup, poll for link.
+ **/
+s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_setup_fiber_serdes_link_generic");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+	/* Take the link out of reset */
+	ctrl &= ~E1000_CTRL_LRST;
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	ret_val = e1000_commit_fc_settings_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Since auto-negotiation is enabled, take the link out of reset (the
+	 * link will be in reset, because we previously reset the chip). This
+	 * will restart auto-negotiation.  If auto-negotiation is successful
+	 * then the link-up status bit will be set and the flow control enable
+	 * bits (RFCE and TFCE) will be set according to their negotiated value.
+	 */
+	DEBUGOUT("Auto-negotiation enabled\n");
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+	E1000_WRITE_FLUSH(hw);
+	msec_delay(1);
+
+	/* For these adapters, the SW definable pin 1 is set when the optics
+	 * detect a signal.  If we have a signal, then poll for a "Link-Up"
+	 * indication.
+	 */
+	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+	    (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) {
+		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
+	} else {
+		DEBUGOUT("No signal detected\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_config_collision_dist_generic - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+static void e1000_config_collision_dist_generic(struct e1000_hw *hw)
+{
+	u32 tctl;
+
+	DEBUGFUNC("e1000_config_collision_dist_generic");
+
+	tctl = E1000_READ_REG(hw, E1000_TCTL);
+
+	tctl &= ~E1000_TCTL_COLD;
+	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+	E1000_WRITE_REG(hw, E1000_TCTL, tctl);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_set_fc_watermarks_generic - Set flow control high/low watermarks
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the flow control high/low threshold (watermark) registers.  If
+ *  flow control XON frame transmission is enabled, then set XON frame
+ *  transmission as well.
+ **/
+s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw)
+{
+	u32 fcrtl = 0, fcrth = 0;
+
+	DEBUGFUNC("e1000_set_fc_watermarks_generic");
+
+	/* Set the flow control receive threshold registers.  Normally,
+	 * these registers will be set to a default threshold that may be
+	 * adjusted later by the driver's runtime code.  However, if the
+	 * ability to transmit pause frames is not enabled, then these
+	 * registers will be set to 0.
+	 */
+	if (hw->fc.current_mode & e1000_fc_tx_pause) {
+		/* We need to set up the Receive Threshold high and low water
+		 * marks as well as (optionally) enabling the transmission of
+		 * XON frames.
+		 */
+		fcrtl = hw->fc.low_water;
+		if (hw->fc.send_xon)
+			fcrtl |= E1000_FCRTL_XONE;
+
+		fcrth = hw->fc.high_water;
+	}
+	E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl);
+	E1000_WRITE_REG(hw, E1000_FCRTH, fcrth);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_force_mac_fc_generic - Force the MAC's flow control settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
+ *  device control register to reflect the adapter settings.  TFCE and RFCE
+ *  need to be explicitly set by software when a copper PHY is used because
+ *  autonegotiation is managed by the PHY rather than the MAC.  Software must
+ *  also configure these bits when link is forced on a fiber connection.
+ **/
+s32 e1000_force_mac_fc_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_force_mac_fc_generic");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+	/* Because we didn't get link via the internal auto-negotiation
+	 * mechanism (we either forced link or we got link via PHY
+	 * auto-neg), we have to manually enable/disable transmit an
+	 * receive flow control.
+	 *
+	 * The "Case" statement below enables/disable flow control
+	 * according to the "hw->fc.current_mode" parameter.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause
+	 *          frames but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          frames but we do not receive pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
+	 *  other:  No other values should be possible at this point.
+	 */
+	DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+		break;
+	case e1000_fc_rx_pause:
+		ctrl &= (~E1000_CTRL_TFCE);
+		ctrl |= E1000_CTRL_RFCE;
+		break;
+	case e1000_fc_tx_pause:
+		ctrl &= (~E1000_CTRL_RFCE);
+		ctrl |= E1000_CTRL_TFCE;
+		break;
+	case e1000_fc_full:
+		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_config_fc_after_link_up_generic - Configures flow control after link
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the status of auto-negotiation after link up to ensure that the
+ *  speed and duplex were not forced.  If the link needed to be forced, then
+ *  flow control needs to be forced also.  If auto-negotiation is enabled
+ *  and did not fail, then we configure flow control based on our link
+ *  partner.
+ **/
+s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val = E1000_SUCCESS;
+	u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg;
+	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+	u16 speed, duplex;
+
+	DEBUGFUNC("e1000_config_fc_after_link_up_generic");
+
+	/* Check for the case where we have fiber media and auto-neg failed
+	 * so we had to force link.  In this case, we need to force the
+	 * configuration of the MAC to match the "fc" parameter.
+	 */
+	if (mac->autoneg_failed) {
+		if (hw->phy.media_type == e1000_media_type_fiber ||
+		    hw->phy.media_type == e1000_media_type_internal_serdes)
+			ret_val = e1000_force_mac_fc_generic(hw);
+	} else {
+		if (hw->phy.media_type == e1000_media_type_copper)
+			ret_val = e1000_force_mac_fc_generic(hw);
+	}
+
+	if (ret_val) {
+		DEBUGOUT("Error forcing flow control settings\n");
+		return ret_val;
+	}
+
+	/* Check for the case where we have copper media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+		/* Read the MII Status Register and check to see if AutoNeg
+		 * has completed.  We read this twice because this reg has
+		 * some "sticky" (latched) bits.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+			DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
+			return ret_val;
+		}
+
+		/* The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (Address 4) and the Auto_Negotiation Base
+		 * Page Ability Register (Address 5) to determine how
+		 * flow control was negotiated.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+					       &mii_nway_adv_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+					       &mii_nway_lp_ability_reg);
+		if (ret_val)
+			return ret_val;
+
+		/* Two bits in the Auto Negotiation Advertisement Register
+		 * (Address 4) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (Address 5) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
+		 *   0   |    1    |   0   |   DC    | e1000_fc_none
+		 *   0   |    1    |   1   |    0    | e1000_fc_none
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | e1000_fc_none
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *   1   |    1    |   0   |    0    | e1000_fc_none
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | E1000_fc_full
+		 *
+		 */
+		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+			/* Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise Rx
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == e1000_fc_full) {
+				hw->fc.current_mode = e1000_fc_full;
+				DEBUGOUT("Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = e1000_fc_rx_pause;
+				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+			}
+		}
+		/* For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 */
+		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_tx_pause;
+			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
+		}
+		/* For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 */
+		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+		} else {
+			/* Per the IEEE spec, at this point flow control
+			 * should be disabled.
+			 */
+			hw->fc.current_mode = e1000_fc_none;
+			DEBUGOUT("Flow Control = NONE.\n");
+		}
+
+		/* Now we need to do one last check...  If we auto-
+		 * negotiated to HALF DUPLEX, flow control should not be
+		 * enabled per IEEE 802.3 spec.
+		 */
+		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
+		if (ret_val) {
+			DEBUGOUT("Error getting link speed and duplex\n");
+			return ret_val;
+		}
+
+		if (duplex == HALF_DUPLEX)
+			hw->fc.current_mode = e1000_fc_none;
+
+		/* Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		ret_val = e1000_force_mac_fc_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	/* Check for the case where we have SerDes media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->phy.media_type == e1000_media_type_internal_serdes) &&
+	    mac->autoneg) {
+		/* Read the PCS_LSTS and check to see if AutoNeg
+		 * has completed.
+		 */
+		pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT);
+
+		if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) {
+			DEBUGOUT("PCS Auto Neg has not completed.\n");
+			return ret_val;
+		}
+
+		/* The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (PCS_ANADV) and the Auto_Negotiation Base
+		 * Page Ability Register (PCS_LPAB) to determine how
+		 * flow control was negotiated.
+		 */
+		pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV);
+		pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB);
+
+		/* Two bits in the Auto Negotiation Advertisement Register
+		 * (PCS_ANADV) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (PCS_LPAB) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
+		 *   0   |    1    |   0   |   DC    | e1000_fc_none
+		 *   0   |    1    |   1   |    0    | e1000_fc_none
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | e1000_fc_none
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *   1   |    1    |   0   |    0    | e1000_fc_none
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *
+		 */
+		if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+		    (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) {
+			/* Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise Rx
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == e1000_fc_full) {
+				hw->fc.current_mode = e1000_fc_full;
+				DEBUGOUT("Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = e1000_fc_rx_pause;
+				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+			}
+		}
+		/* For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 */
+		else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) &&
+			  (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+			  (pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+			  (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_tx_pause;
+			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
+		}
+		/* For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 */
+		else if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+			 !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+		} else {
+			/* Per the IEEE spec, at this point flow control
+			 * should be disabled.
+			 */
+			hw->fc.current_mode = e1000_fc_none;
+			DEBUGOUT("Flow Control = NONE.\n");
+		}
+
+		/* Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL);
+		pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+		E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg);
+
+		ret_val = e1000_force_mac_fc_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Read the status register for the current speed/duplex and store the current
+ *  speed and duplex for copper connections.
+ **/
+s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
+					      u16 *duplex)
+{
+	u32 status;
+
+	DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic");
+
+	status = E1000_READ_REG(hw, E1000_STATUS);
+	if (status & E1000_STATUS_SPEED_1000) {
+		*speed = SPEED_1000;
+		DEBUGOUT("1000 Mbs, ");
+	} else if (status & E1000_STATUS_SPEED_100) {
+		*speed = SPEED_100;
+		DEBUGOUT("100 Mbs, ");
+	} else {
+		*speed = SPEED_10;
+		DEBUGOUT("10 Mbs, ");
+	}
+
+	if (status & E1000_STATUS_FD) {
+		*duplex = FULL_DUPLEX;
+		DEBUGOUT("Full Duplex\n");
+	} else {
+		*duplex = HALF_DUPLEX;
+		DEBUGOUT("Half Duplex\n");
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Sets the speed and duplex to gigabit full duplex (the only possible option)
+ *  for fiber/serdes links.
+ **/
+s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw,
+						    u16 *speed, u16 *duplex)
+{
+	DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic");
+
+	*speed = SPEED_1000;
+	*duplex = FULL_DUPLEX;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_hw_semaphore_generic - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw)
+{
+	u32 swsm;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	DEBUGFUNC("e1000_get_hw_semaphore_generic");
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = E1000_READ_REG(hw, E1000_SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		usec_delay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+		return -E1000_ERR_NVM;
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = E1000_READ_REG(hw, E1000_SWSM);
+		E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
+			break;
+
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		e1000_put_hw_semaphore_generic(hw);
+		DEBUGOUT("Driver can't access the NVM\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_put_hw_semaphore_generic - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ **/
+void e1000_put_hw_semaphore_generic(struct e1000_hw *hw)
+{
+	u32 swsm;
+
+	DEBUGFUNC("e1000_put_hw_semaphore_generic");
+
+	swsm = E1000_READ_REG(hw, E1000_SWSM);
+
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+	E1000_WRITE_REG(hw, E1000_SWSM, swsm);
+}
+
+/**
+ *  e1000_get_auto_rd_done_generic - Check for auto read completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check EEPROM for Auto Read done bit.
+ **/
+s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw)
+{
+	s32 i = 0;
+
+	DEBUGFUNC("e1000_get_auto_rd_done_generic");
+
+	while (i < AUTO_READ_DONE_TIMEOUT) {
+		if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD)
+			break;
+		msec_delay(1);
+		i++;
+	}
+
+	if (i == AUTO_READ_DONE_TIMEOUT) {
+		DEBUGOUT("Auto read by HW from NVM has not completed.\n");
+		return -E1000_ERR_RESET;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_valid_led_default_generic - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_valid_led_default_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_id_led_init_generic -
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 e1000_id_led_init_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_mask = 0x000000FF;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+	u16 data, i, temp;
+	const u16 led_mask = 0x0F;
+
+	DEBUGFUNC("e1000_id_led_init_generic");
+
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		return ret_val;
+
+	mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & led_mask;
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 e1000_setup_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl;
+
+	DEBUGFUNC("e1000_setup_led_generic");
+
+	if (hw->mac.ops.setup_led != e1000_setup_led_generic)
+		return -E1000_ERR_CONFIG;
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		ledctl = E1000_READ_REG(hw, E1000_LEDCTL);
+		hw->mac.ledctl_default = ledctl;
+		/* Turn off LED0 */
+		ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK |
+			    E1000_LEDCTL_LED0_MODE_MASK);
+		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+			   E1000_LEDCTL_LED0_MODE_SHIFT);
+		E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl);
+	} else if (hw->phy.media_type == e1000_media_type_copper) {
+		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_cleanup_led_generic - Set LED config to default operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Remove the current LED configuration and set the LED configuration
+ *  to the default value, saved from the EEPROM.
+ **/
+s32 e1000_cleanup_led_generic(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_cleanup_led_generic");
+
+	E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default);
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_blink_led_generic - Blink LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Blink the LEDs which are set to be on.
+ **/
+s32 e1000_blink_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl_blink = 0;
+	u32 i;
+
+	DEBUGFUNC("e1000_blink_led_generic");
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		/* always blink LED0 for PCI-E fiber */
+		ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+		     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+	} else {
+		/* Set the blink bit for each LED that's "on" (0x0E)
+		 * (or "off" if inverted) in ledctl_mode2.  The blink
+		 * logic in hardware only works when mode is set to "on"
+		 * so it must be changed accordingly when the mode is
+		 * "off" and inverted.
+		 */
+		ledctl_blink = hw->mac.ledctl_mode2;
+		for (i = 0; i < 32; i += 8) {
+			u32 mode = (hw->mac.ledctl_mode2 >> i) &
+			    E1000_LEDCTL_LED0_MODE_MASK;
+			u32 led_default = hw->mac.ledctl_default >> i;
+
+			if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
+			     (mode == E1000_LEDCTL_MODE_LED_ON)) ||
+			    ((led_default & E1000_LEDCTL_LED0_IVRT) &&
+			     (mode == E1000_LEDCTL_MODE_LED_OFF))) {
+				ledctl_blink &=
+				    ~(E1000_LEDCTL_LED0_MODE_MASK << i);
+				ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
+						 E1000_LEDCTL_MODE_LED_ON) << i;
+			}
+		}
+	}
+
+	E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_led_on_generic - Turn LED on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED on.
+ **/
+s32 e1000_led_on_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_led_on_generic");
+
+	switch (hw->phy.media_type) {
+	case e1000_media_type_fiber:
+		ctrl = E1000_READ_REG(hw, E1000_CTRL);
+		ctrl &= ~E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+		break;
+	case e1000_media_type_copper:
+		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2);
+		break;
+	default:
+		break;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_led_off_generic - Turn LED off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED off.
+ **/
+s32 e1000_led_off_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_led_off_generic");
+
+	switch (hw->phy.media_type) {
+	case e1000_media_type_fiber:
+		ctrl = E1000_READ_REG(hw, E1000_CTRL);
+		ctrl |= E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+		break;
+	case e1000_media_type_copper:
+		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
+		break;
+	default:
+		break;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities
+ *  @hw: pointer to the HW structure
+ *  @no_snoop: bitmap of snoop events
+ *
+ *  Set the PCI-express register to snoop for events enabled in 'no_snoop'.
+ **/
+void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop)
+{
+	u32 gcr;
+
+	DEBUGFUNC("e1000_set_pcie_no_snoop_generic");
+
+	if (no_snoop) {
+		gcr = E1000_READ_REG(hw, E1000_GCR);
+		gcr &= ~(PCIE_NO_SNOOP_ALL);
+		gcr |= no_snoop;
+		E1000_WRITE_REG(hw, E1000_GCR, gcr);
+	}
+}
+
+/**
+ *  e1000_disable_pcie_master_generic - Disables PCI-express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns E1000_SUCCESS if successful, else returns -10
+ *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ *  the master requests to be disabled.
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests.
+ **/
+s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 timeout = MASTER_DISABLE_TIMEOUT;
+
+	DEBUGFUNC("e1000_disable_pcie_master_generic");
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+	while (timeout) {
+		if (!(E1000_READ_REG(hw, E1000_STATUS) &
+		      E1000_STATUS_GIO_MASTER_ENABLE))
+			break;
+		usec_delay(100);
+		timeout--;
+	}
+
+	if (!timeout) {
+		DEBUGOUT("Master requests are pending.\n");
+		return -E1000_ERR_MASTER_REQUESTS_PENDING;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
+void e1000_reset_adaptive_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("e1000_reset_adaptive_generic");
+
+	if (!mac->adaptive_ifs) {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	mac->current_ifs_val = 0;
+	mac->ifs_min_val = IFS_MIN;
+	mac->ifs_max_val = IFS_MAX;
+	mac->ifs_step_size = IFS_STEP;
+	mac->ifs_ratio = IFS_RATIO;
+
+	mac->in_ifs_mode = false;
+	E1000_WRITE_REG(hw, E1000_AIT, 0);
+}
+
+/**
+ *  e1000_update_adaptive_generic - Update Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Update the Adaptive Interframe Spacing Throttle value based on the
+ *  time between transmitted packets and time between collisions.
+ **/
+void e1000_update_adaptive_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("e1000_update_adaptive_generic");
+
+	if (!mac->adaptive_ifs) {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
+		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
+			mac->in_ifs_mode = true;
+			if (mac->current_ifs_val < mac->ifs_max_val) {
+				if (!mac->current_ifs_val)
+					mac->current_ifs_val = mac->ifs_min_val;
+				else
+					mac->current_ifs_val +=
+						mac->ifs_step_size;
+				E1000_WRITE_REG(hw, E1000_AIT,
+						mac->current_ifs_val);
+			}
+		}
+	} else {
+		if (mac->in_ifs_mode &&
+		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+			mac->current_ifs_val = 0;
+			mac->in_ifs_mode = false;
+			E1000_WRITE_REG(hw, E1000_AIT, 0);
+		}
+	}
+}
+
+/**
+ *  e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify that when not using auto-negotiation that MDI/MDIx is correctly
+ *  set, which is forced to MDI mode only.
+ **/
+static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw)
+{
+	DEBUGFUNC("e1000_validate_mdi_setting_generic");
+
+	if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+		DEBUGOUT("Invalid MDI setting detected\n");
+		hw->phy.mdix = 1;
+		return -E1000_ERR_CONFIG;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Validate the MDI/MDIx setting, allowing for auto-crossover during forced
+ *  operation.
+ **/
+s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic");
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register
+ *  @hw: pointer to the HW structure
+ *  @reg: 32bit register offset such as E1000_SCTL
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes an address/data control type register.  There are several of these
+ *  and they all have the format address << 8 | data and bit 31 is polled for
+ *  completion.
+ **/
+s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
+				      u32 offset, u8 data)
+{
+	u32 i, regvalue = 0;
+
+	DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic");
+
+	/* Set up the address and data */
+	regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+	E1000_WRITE_REG(hw, reg, regvalue);
+
+	/* Poll the ready bit to see if the MDI read completed */
+	for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+		usec_delay(5);
+		regvalue = E1000_READ_REG(hw, reg);
+		if (regvalue & E1000_GEN_CTL_READY)
+			break;
+	}
+	if (!(regvalue & E1000_GEN_CTL_READY)) {
+		DEBUGOUT1("Reg %08x did not indicate ready\n", reg);
+		return -E1000_ERR_PHY;
+	}
+
+	return E1000_SUCCESS;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.h b/kernel/linux/kni/ethtool/igb/e1000_mac.h
new file mode 100644
index 0000000..a3e7849
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_mac.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+void e1000_init_mac_ops_generic(struct e1000_hw *hw);
+void e1000_null_mac_generic(struct e1000_hw *hw);
+s32  e1000_null_ops_generic(struct e1000_hw *hw);
+s32  e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d);
+bool e1000_null_mng_mode(struct e1000_hw *hw);
+void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a);
+void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b);
+void e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a);
+s32  e1000_blink_led_generic(struct e1000_hw *hw);
+s32  e1000_check_for_copper_link_generic(struct e1000_hw *hw);
+s32  e1000_check_for_fiber_link_generic(struct e1000_hw *hw);
+s32  e1000_check_for_serdes_link_generic(struct e1000_hw *hw);
+s32  e1000_cleanup_led_generic(struct e1000_hw *hw);
+s32  e1000_config_fc_after_link_up_generic(struct e1000_hw *hw);
+s32  e1000_disable_pcie_master_generic(struct e1000_hw *hw);
+s32  e1000_force_mac_fc_generic(struct e1000_hw *hw);
+s32  e1000_get_auto_rd_done_generic(struct e1000_hw *hw);
+s32  e1000_get_bus_info_pcie_generic(struct e1000_hw *hw);
+void e1000_set_lan_id_single_port(struct e1000_hw *hw);
+s32  e1000_get_hw_semaphore_generic(struct e1000_hw *hw);
+s32  e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
+					       u16 *duplex);
+s32  e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw,
+						     u16 *speed, u16 *duplex);
+s32  e1000_id_led_init_generic(struct e1000_hw *hw);
+s32  e1000_led_on_generic(struct e1000_hw *hw);
+s32  e1000_led_off_generic(struct e1000_hw *hw);
+void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
+				       u8 *mc_addr_list, u32 mc_addr_count);
+s32  e1000_set_fc_watermarks_generic(struct e1000_hw *hw);
+s32  e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw);
+s32  e1000_setup_led_generic(struct e1000_hw *hw);
+s32  e1000_setup_link_generic(struct e1000_hw *hw);
+s32  e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw);
+s32  e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
+				       u32 offset, u8 data);
+
+u32  e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr);
+
+void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw);
+void e1000_clear_vfta_generic(struct e1000_hw *hw);
+void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count);
+void e1000_put_hw_semaphore_generic(struct e1000_hw *hw);
+s32  e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
+void e1000_reset_adaptive_generic(struct e1000_hw *hw);
+void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop);
+void e1000_update_adaptive_generic(struct e1000_hw *hw);
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.c b/kernel/linux/kni/ethtool/igb/e1000_manage.c
new file mode 100644
index 0000000..2f75bc3
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_manage.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+/**
+ *  e1000_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+u8 e1000_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	DEBUGFUNC("e1000_calculate_checksum");
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8) (0 - sum);
+}
+
+/**
+ *  e1000_mng_enable_host_if_generic - Checks host interface is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
+ *
+ *  This function checks whether the HOST IF is enabled for command operation
+ *  and also checks whether the previous command is completed.  It busy waits
+ *  in case of previous command is not completed.
+ **/
+s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw)
+{
+	u32 hicr;
+	u8 i;
+
+	DEBUGFUNC("e1000_mng_enable_host_if_generic");
+
+	if (!hw->mac.arc_subsystem_valid) {
+		DEBUGOUT("ARC subsystem not valid.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	if (!(hicr & E1000_HICR_EN)) {
+		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+	/* check the previous command is completed */
+	for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+		hicr = E1000_READ_REG(hw, E1000_HICR);
+		if (!(hicr & E1000_HICR_C))
+			break;
+		msec_delay_irq(1);
+	}
+
+	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+		DEBUGOUT("Previous command timeout failed .\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_check_mng_mode_generic - Generic check management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the firmware semaphore register and returns true (>0) if
+ *  manageability is enabled, else false (0).
+ **/
+bool e1000_check_mng_mode_generic(struct e1000_hw *hw)
+{
+	u32 fwsm = E1000_READ_REG(hw, E1000_FWSM);
+
+	DEBUGFUNC("e1000_check_mng_mode_generic");
+
+
+	return (fwsm & E1000_FWSM_MODE_MASK) ==
+		(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
+
+/**
+ *  e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx
+ *  @hw: pointer to the HW structure
+ *
+ *  Enables packet filtering on transmit packets if manageability is enabled
+ *  and host interface is enabled.
+ **/
+bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw)
+{
+	struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+	u32 *buffer = (u32 *)&hw->mng_cookie;
+	u32 offset;
+	s32 ret_val, hdr_csum, csum;
+	u8 i, len;
+
+	DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic");
+
+	hw->mac.tx_pkt_filtering = true;
+
+	/* No manageability, no filtering */
+	if (!hw->mac.ops.check_mng_mode(hw)) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* If we can't read from the host interface for whatever
+	 * reason, disable filtering.
+	 */
+	ret_val = e1000_mng_enable_host_if_generic(hw);
+	if (ret_val != E1000_SUCCESS) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Read in the header.  Length and offset are in dwords. */
+	len    = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
+	offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
+	for (i = 0; i < len; i++)
+		*(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
+							   offset + i);
+	hdr_csum = hdr->checksum;
+	hdr->checksum = 0;
+	csum = e1000_calculate_checksum((u8 *)hdr,
+					E1000_MNG_DHCP_COOKIE_LENGTH);
+	/* If either the checksums or signature don't match, then
+	 * the cookie area isn't considered valid, in which case we
+	 * take the safe route of assuming Tx filtering is enabled.
+	 */
+	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
+		hw->mac.tx_pkt_filtering = true;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Cookie area is valid, make the final check for filtering. */
+	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
+		hw->mac.tx_pkt_filtering = false;
+
+	return hw->mac.tx_pkt_filtering;
+}
+
+/**
+ *  e1000_mng_write_cmd_header_generic - Writes manageability command header
+ *  @hw: pointer to the HW structure
+ *  @hdr: pointer to the host interface command header
+ *
+ *  Writes the command header after does the checksum calculation.
+ **/
+s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
+				      struct e1000_host_mng_command_header *hdr)
+{
+	u16 i, length = sizeof(struct e1000_host_mng_command_header);
+
+	DEBUGFUNC("e1000_mng_write_cmd_header_generic");
+
+	/* Write the whole command header structure with new checksum. */
+
+	hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
+
+	length >>= 2;
+	/* Write the relevant command block into the ram area. */
+	for (i = 0; i < length; i++) {
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
+					    *((u32 *) hdr + i));
+		E1000_WRITE_FLUSH(hw);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_mng_host_if_write_generic - Write to the manageability host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface buffer
+ *  @length: size of the buffer
+ *  @offset: location in the buffer to write to
+ *  @sum: sum of the data (not checksum)
+ *
+ *  This function writes the buffer content at the offset given on the host if.
+ *  It also does alignment considerations to do the writes in most efficient
+ *  way.  Also fills up the sum of the buffer in *buffer parameter.
+ **/
+s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
+				    u16 length, u16 offset, u8 *sum)
+{
+	u8 *tmp;
+	u8 *bufptr = buffer;
+	u32 data = 0;
+	u16 remaining, i, j, prev_bytes;
+
+	DEBUGFUNC("e1000_mng_host_if_write_generic");
+
+	/* sum = only sum of the data and it is not checksum */
+
+	if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
+		return -E1000_ERR_PARAM;
+
+	tmp = (u8 *)&data;
+	prev_bytes = offset & 0x3;
+	offset >>= 2;
+
+	if (prev_bytes) {
+		data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset);
+		for (j = prev_bytes; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data);
+		length -= j - prev_bytes;
+		offset++;
+	}
+
+	remaining = length & 0x3;
+	length -= remaining;
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant command block into the
+	 * ram area.
+	 */
+	for (i = 0; i < length; i++) {
+		for (j = 0; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
+					    data);
+	}
+	if (remaining) {
+		for (j = 0; j < sizeof(u32); j++) {
+			if (j < remaining)
+				*(tmp + j) = *bufptr++;
+			else
+				*(tmp + j) = 0;
+
+			*sum += *(tmp + j);
+		}
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
+					    data);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface
+ *  @length: size of the buffer
+ *
+ *  Writes the DHCP information to the host interface.
+ **/
+s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer,
+				      u16 length)
+{
+	struct e1000_host_mng_command_header hdr;
+	s32 ret_val;
+	u32 hicr;
+
+	DEBUGFUNC("e1000_mng_write_dhcp_info_generic");
+
+	hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+	hdr.command_length = length;
+	hdr.reserved1 = 0;
+	hdr.reserved2 = 0;
+	hdr.checksum = 0;
+
+	/* Enable the host interface */
+	ret_val = e1000_mng_enable_host_if_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Populate the host interface with the contents of "buffer". */
+	ret_val = e1000_mng_host_if_write_generic(hw, buffer, length,
+						  sizeof(hdr), &(hdr.checksum));
+	if (ret_val)
+		return ret_val;
+
+	/* Write the manageability command header */
+	ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr);
+	if (ret_val)
+		return ret_val;
+
+	/* Tell the ARC a new command is pending. */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_enable_mng_pass_thru - Check if management passthrough is needed
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies the hardware needs to leave interface enabled so that frames can
+ *  be directed to and from the management interface.
+ **/
+bool e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+	u32 manc;
+	u32 fwsm, factps;
+
+	DEBUGFUNC("e1000_enable_mng_pass_thru");
+
+	if (!hw->mac.asf_firmware_present)
+		return false;
+
+	manc = E1000_READ_REG(hw, E1000_MANC);
+
+	if (!(manc & E1000_MANC_RCV_TCO_EN))
+		return false;
+
+	if (hw->mac.has_fwsm) {
+		fwsm = E1000_READ_REG(hw, E1000_FWSM);
+		factps = E1000_READ_REG(hw, E1000_FACTPS);
+
+		if (!(factps & E1000_FACTPS_MNGCG) &&
+		    ((fwsm & E1000_FWSM_MODE_MASK) ==
+		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
+			return true;
+	} else if ((manc & E1000_MANC_SMBUS_EN) &&
+		   !(manc & E1000_MANC_ASF_EN)) {
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ *  e1000_host_interface_command - Writes buffer to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains a command to write
+ *  @length: the byte length of the buffer, must be multiple of 4 bytes
+ *
+ *  Writes a buffer to the Host Interface.  Upon success, returns E1000_SUCCESS
+ *  else returns E1000_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length)
+{
+	u32 hicr, i;
+
+	DEBUGFUNC("e1000_host_interface_command");
+
+	if (!(hw->mac.arc_subsystem_valid)) {
+		DEBUGOUT("Hardware doesn't support host interface command.\n");
+		return E1000_SUCCESS;
+	}
+
+	if (!hw->mac.asf_firmware_present) {
+		DEBUGOUT("Firmware is not present.\n");
+		return E1000_SUCCESS;
+	}
+
+	if (length == 0 || length & 0x3 ||
+	    length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT("Buffer length failure.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	if (!(hicr & E1000_HICR_EN)) {
+		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < length; i++)
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
+					    *((u32 *)buffer + i));
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
+
+	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
+		hicr = E1000_READ_REG(hw, E1000_HICR);
+		if (!(hicr & E1000_HICR_C))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check command successful completion. */
+	if (i == E1000_HI_COMMAND_TIMEOUT ||
+	    (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) {
+		DEBUGOUT("Command has failed with no status valid.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	for (i = 0; i < length; i++)
+		*((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw,
+								  E1000_HOST_IF,
+								  i);
+
+	return E1000_SUCCESS;
+}
+/**
+ *  e1000_load_firmware - Writes proxy FW code buffer to host interface
+ *                        and execute.
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains a firmware to write
+ *  @length: the byte length of the buffer, must be multiple of 4 bytes
+ *
+ *  Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled
+ *  in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length)
+{
+	u32 hicr, hibba, fwsm, icr, i;
+
+	DEBUGFUNC("e1000_load_firmware");
+
+	if (hw->mac.type < e1000_i210) {
+		DEBUGOUT("Hardware doesn't support loading FW by the driver\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	if (!(hicr & E1000_HICR_EN)) {
+		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+		return -E1000_ERR_CONFIG;
+	}
+	if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) {
+		DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) {
+		DEBUGOUT("Buffer length failure.\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	/* Clear notification from ROM-FW by reading ICR register */
+	icr = E1000_READ_REG(hw, E1000_ICR_V2);
+
+	/* Reset ROM-FW */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	hicr |= E1000_HICR_FW_RESET_ENABLE;
+	E1000_WRITE_REG(hw, E1000_HICR, hicr);
+	hicr |= E1000_HICR_FW_RESET;
+	E1000_WRITE_REG(hw, E1000_HICR, hicr);
+	E1000_WRITE_FLUSH(hw);
+
+	/* Wait till MAC notifies about its readiness after ROM-FW reset */
+	for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) {
+		icr = E1000_READ_REG(hw, E1000_ICR_V2);
+		if (icr & E1000_ICR_MNG)
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for timeout */
+	if (i == E1000_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("FW reset failed.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Wait till MAC is ready to accept new FW code */
+	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
+		fwsm = E1000_READ_REG(hw, E1000_FWSM);
+		if ((fwsm & E1000_FWSM_FW_VALID) &&
+		    ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT ==
+		    E1000_FWSM_HI_EN_ONLY_MODE))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for timeout */
+	if (i == E1000_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("FW reset failed.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant FW code block
+	 * into the ram area in DWORDs via 1kB ram addressing window.
+	 */
+	for (i = 0; i < length; i++) {
+		if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) {
+			/* Point to correct 1kB ram window */
+			hibba = E1000_HI_FW_BASE_ADDRESS +
+				((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) *
+				(i / E1000_HI_FW_BLOCK_DWORD_LENGTH));
+
+			E1000_WRITE_REG(hw, E1000_HIBBA, hibba);
+		}
+
+		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
+					    i % E1000_HI_FW_BLOCK_DWORD_LENGTH,
+					    *((u32 *)buffer + i));
+	}
+
+	/* Setting this bit tells the ARC that a new FW is ready to execute. */
+	hicr = E1000_READ_REG(hw, E1000_HICR);
+	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
+
+	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
+		hicr = E1000_READ_REG(hw, E1000_HICR);
+		if (!(hicr & E1000_HICR_C))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for successful FW start. */
+	if (i == E1000_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("New FW did not start within timeout period.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return E1000_SUCCESS;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.h b/kernel/linux/kni/ethtool/igb/e1000_manage.h
new file mode 100644
index 0000000..9f27b93
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_manage.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MANAGE_H_
+#define _E1000_MANAGE_H_
+
+bool e1000_check_mng_mode_generic(struct e1000_hw *hw);
+bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw);
+s32  e1000_mng_enable_host_if_generic(struct e1000_hw *hw);
+s32  e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
+				     u16 length, u16 offset, u8 *sum);
+s32  e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
+				     struct e1000_host_mng_command_header *hdr);
+s32  e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw,
+				       u8 *buffer, u16 length);
+bool e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+u8 e1000_calculate_checksum(u8 *buffer, u32 length);
+s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length);
+s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length);
+
+enum e1000_mng_mode {
+	e1000_mng_mode_none = 0,
+	e1000_mng_mode_asf,
+	e1000_mng_mode_pt,
+	e1000_mng_mode_ipmi,
+	e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG			0x20000000
+
+#define E1000_FWSM_MODE_MASK			0xE
+#define E1000_FWSM_MODE_SHIFT			1
+#define E1000_FWSM_FW_VALID			0x00008000
+#define E1000_FWSM_HI_EN_ONLY_MODE		0x4
+
+#define E1000_MNG_IAMT_MODE			0x3
+#define E1000_MNG_DHCP_COOKIE_LENGTH		0x10
+#define E1000_MNG_DHCP_COOKIE_OFFSET		0x6F0
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT		10
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD		64
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING	0x1
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN	0x2
+
+#define E1000_VFTA_ENTRY_SHIFT			5
+#define E1000_VFTA_ENTRY_MASK			0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK		0x1F
+
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH		1792 /* Num of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH		448 /* Num of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT		500 /* Process HI cmd limit */
+#define E1000_HI_FW_BASE_ADDRESS		0x10000
+#define E1000_HI_FW_MAX_LENGTH			(64 * 1024) /* Num of bytes */
+#define E1000_HI_FW_BLOCK_DWORD_LENGTH		256 /* Num of DWORDs per page */
+#define E1000_HICR_MEMORY_BASE_EN		0x200 /* MB Enable bit - RO */
+#define E1000_HICR_EN			0x01  /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C			0x02
+#define E1000_HICR_SV			0x04  /* Status Validity */
+#define E1000_HICR_FW_RESET_ENABLE	0x40
+#define E1000_HICR_FW_RESET		0x80
+
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE		0x544D4149
+
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.c b/kernel/linux/kni/ethtool/igb/e1000_mbx.c
new file mode 100644
index 0000000..1be4434
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_mbx.h"
+
+/**
+ *  e1000_null_mbx_check_for_flag - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw,
+					 u16 E1000_UNUSEDARG mbx_id)
+{
+	DEBUGFUNC("e1000_null_mbx_check_flag");
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_mbx_transact - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw,
+				   u32 E1000_UNUSEDARG *msg,
+				   u16 E1000_UNUSEDARG size,
+				   u16 E1000_UNUSEDARG mbx_id)
+{
+	DEBUGFUNC("e1000_null_mbx_rw_msg");
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfully read message from buffer
+ **/
+s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_read_mbx");
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	if (mbx->ops.read)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_write_mbx");
+
+	if (size > mbx->size)
+		ret_val = -E1000_ERR_MBX;
+
+	else if (mbx->ops.write)
+		ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_msg");
+
+	if (mbx->ops.check_for_msg)
+		ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_ack");
+
+	if (mbx->ops.check_for_ack)
+		ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_rst");
+
+	if (mbx->ops.check_for_rst)
+		ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	DEBUGFUNC("e1000_poll_for_msg");
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		usec_delay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ *  e1000_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	DEBUGFUNC("e1000_poll_for_ack");
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		usec_delay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ *  e1000_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_read_posted_mbx");
+
+	if (!mbx->ops.read)
+		goto out;
+
+	ret_val = e1000_poll_for_msg(hw, mbx_id);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_write_posted_mbx");
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		goto out;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = e1000_poll_for_ack(hw, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_mbx_ops_generic - Initialize mbx function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the function pointers to no-op functions
+ **/
+void e1000_init_mbx_ops_generic(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	mbx->ops.init_params = e1000_null_ops_generic;
+	mbx->ops.read = e1000_null_mbx_transact;
+	mbx->ops.write = e1000_null_mbx_transact;
+	mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag;
+	mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag;
+	mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag;
+	mbx->ops.read_posted = e1000_read_posted_mbx;
+	mbx->ops.write_posted = e1000_write_posted_mbx;
+}
+
+static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
+{
+	u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR);
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (mbvficr & mask) {
+		ret_val = E1000_SUCCESS;
+		E1000_WRITE_REG(hw, E1000_MBVFICR, mask);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_msg_pf");
+
+	if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
+		ret_val = E1000_SUCCESS;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_ack_pf");
+
+	if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
+		ret_val = E1000_SUCCESS;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	u32 vflre = E1000_READ_REG(hw, E1000_VFLRE);
+	s32 ret_val = -E1000_ERR_MBX;
+
+	DEBUGFUNC("e1000_check_for_rst_pf");
+
+	if (vflre & (1 << vf_number)) {
+		ret_val = E1000_SUCCESS;
+		E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number));
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+	u32 p2v_mailbox;
+
+	DEBUGFUNC("e1000_obtain_mbx_lock_pf");
+
+	/* Take ownership of the buffer */
+	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number));
+	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+		ret_val = E1000_SUCCESS;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+			      u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	DEBUGFUNC("e1000_write_mbx_pf");
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	e1000_check_for_msg_pf(hw, vf_number);
+	e1000_check_for_ack_pf(hw, vf_number);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]);
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+	return ret_val;
+
+}
+
+/**
+ *  e1000_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+			     u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	DEBUGFUNC("e1000_read_mbx_pf");
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i);
+
+	/* Acknowledge the message and release buffer */
+	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+s32 e1000_init_mbx_params_pf(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+	case e1000_i354:
+		mbx->timeout = 0;
+		mbx->usec_delay = 0;
+
+		mbx->size = E1000_VFMAILBOX_SIZE;
+
+		mbx->ops.read = e1000_read_mbx_pf;
+		mbx->ops.write = e1000_write_mbx_pf;
+		mbx->ops.read_posted = e1000_read_posted_mbx;
+		mbx->ops.write_posted = e1000_write_posted_mbx;
+		mbx->ops.check_for_msg = e1000_check_for_msg_pf;
+		mbx->ops.check_for_ack = e1000_check_for_ack_pf;
+		mbx->ops.check_for_rst = e1000_check_for_rst_pf;
+
+		mbx->stats.msgs_tx = 0;
+		mbx->stats.msgs_rx = 0;
+		mbx->stats.reqs = 0;
+		mbx->stats.acks = 0;
+		mbx->stats.rsts = 0;
+	default:
+		return E1000_SUCCESS;
+	}
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.h b/kernel/linux/kni/ethtool/igb/e1000_mbx.h
new file mode 100644
index 0000000..5951f18
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "e1000_api.h"
+
+#define E1000_P2VMAILBOX_STS	0x00000001 /* Initiate message send to VF */
+#define E1000_P2VMAILBOX_ACK	0x00000002 /* Ack message recv'd from VF */
+#define E1000_P2VMAILBOX_VFU	0x00000004 /* VF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_PFU	0x00000008 /* PF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_RVFU	0x00000010 /* Reset VFU - used when VF stuck */
+
+#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
+#define E1000_MBVFICR_VFREQ_VF1	0x00000001 /* bit for VF 1 message */
+#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
+#define E1000_MBVFICR_VFACK_VF1	0x00010000 /* bit for VF 1 ack */
+
+#define E1000_VFMAILBOX_SIZE	16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+/* Msgs below or'd with this are the ACK */
+#define E1000_VT_MSGTYPE_ACK	0x80000000
+/* Msgs below or'd with this are the NACK */
+#define E1000_VT_MSGTYPE_NACK	0x40000000
+/* Indicates that VF is still clear to send requests */
+#define E1000_VT_MSGTYPE_CTS	0x20000000
+#define E1000_VT_MSGINFO_SHIFT	16
+/* bits 23:16 are used for extra info for certain messages */
+#define E1000_VT_MSGINFO_MASK	(0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET			0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR		0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST		0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_MULTICAST_OVERFLOW	(0x80 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_VLAN		0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_VLAN_ADD		(0x01 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_LPE		0x05 /* reqs to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC		0x06 /* reqs to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_UNICAST	(0x01 << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VF_SET_PROMISC_MULTICAST	(0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG		0x0100 /* PF control message */
+
+#define E1000_VF_MBX_INIT_TIMEOUT	2000 /* number of retries on mailbox */
+#define E1000_VF_MBX_INIT_DELAY		500  /* microseconds between retries */
+
+s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 e1000_check_for_msg(struct e1000_hw *, u16);
+s32 e1000_check_for_ack(struct e1000_hw *, u16);
+s32 e1000_check_for_rst(struct e1000_hw *, u16);
+void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
+s32 e1000_init_mbx_params_pf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.c b/kernel/linux/kni/ethtool/igb/e1000_nvm.c
new file mode 100644
index 0000000..78c3fc0
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.c
@@ -0,0 +1,950 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+static void e1000_reload_nvm_generic(struct e1000_hw *hw);
+
+/**
+ *  e1000_init_nvm_ops_generic - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	DEBUGFUNC("e1000_init_nvm_ops_generic");
+
+	/* Initialize function pointers */
+	nvm->ops.init_params = e1000_null_ops_generic;
+	nvm->ops.acquire = e1000_null_ops_generic;
+	nvm->ops.read = e1000_null_read_nvm;
+	nvm->ops.release = e1000_null_nvm_generic;
+	nvm->ops.reload = e1000_reload_nvm_generic;
+	nvm->ops.update = e1000_null_ops_generic;
+	nvm->ops.valid_led_default = e1000_null_led_default;
+	nvm->ops.validate = e1000_null_ops_generic;
+	nvm->ops.write = e1000_null_write_nvm;
+}
+
+/**
+ *  e1000_null_nvm_read - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
+			u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
+			u16 E1000_UNUSEDARG *c)
+{
+	DEBUGFUNC("e1000_null_read_nvm");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_nvm_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_nvm_generic");
+	return;
+}
+
+/**
+ *  e1000_null_led_default - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw,
+			   u16 E1000_UNUSEDARG *data)
+{
+	DEBUGFUNC("e1000_null_led_default");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_write_nvm - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
+			 u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
+			 u16 E1000_UNUSEDARG *c)
+{
+	DEBUGFUNC("e1000_null_write_nvm");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_raise_eec_clk - Raise EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Enable/Raise the EEPROM clock bit.
+ **/
+static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd | E1000_EECD_SK;
+	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
+	E1000_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_lower_eec_clk - Lower EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Clear/Lower the EEPROM clock bit.
+ **/
+static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd & ~E1000_EECD_SK;
+	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
+	E1000_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ *
+ *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
+ *  "data" parameter will be shifted out to the EEPROM one bit at a time.
+ *  In order to do this, "data" must be broken down into bits.
+ **/
+static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u32 mask;
+
+	DEBUGFUNC("e1000_shift_out_eec_bits");
+
+	mask = 0x01 << (count - 1);
+	if (nvm->type == e1000_nvm_eeprom_spi)
+		eecd |= E1000_EECD_DO;
+
+	do {
+		eecd &= ~E1000_EECD_DI;
+
+		if (data & mask)
+			eecd |= E1000_EECD_DI;
+
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+
+		usec_delay(nvm->delay_usec);
+
+		e1000_raise_eec_clk(hw, &eecd);
+		e1000_lower_eec_clk(hw, &eecd);
+
+		mask >>= 1;
+	} while (mask);
+
+	eecd &= ~E1000_EECD_DI;
+	E1000_WRITE_REG(hw, E1000_EECD, eecd);
+}
+
+/**
+ *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @count: number of bits to shift in
+ *
+ *  In order to read a register from the EEPROM, we need to shift 'count' bits
+ *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
+ *  the EEPROM (setting the SK bit), and then reading the value of the data out
+ *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
+ *  always be clear.
+ **/
+static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+	u32 eecd;
+	u32 i;
+	u16 data;
+
+	DEBUGFUNC("e1000_shift_in_eec_bits");
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+	data = 0;
+
+	for (i = 0; i < count; i++) {
+		data <<= 1;
+		e1000_raise_eec_clk(hw, &eecd);
+
+		eecd = E1000_READ_REG(hw, E1000_EECD);
+
+		eecd &= ~E1000_EECD_DI;
+		if (eecd & E1000_EECD_DO)
+			data |= 1;
+
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+
+	return data;
+}
+
+/**
+ *  e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ *  @hw: pointer to the HW structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the EEPROM status bit for either read or write completion based
+ *  upon the value of 'ee_reg'.
+ **/
+s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+	u32 attempts = 100000;
+	u32 i, reg = 0;
+
+	DEBUGFUNC("e1000_poll_eerd_eewr_done");
+
+	for (i = 0; i < attempts; i++) {
+		if (ee_reg == E1000_NVM_POLL_READ)
+			reg = E1000_READ_REG(hw, E1000_EERD);
+		else
+			reg = E1000_READ_REG(hw, E1000_EEWR);
+
+		if (reg & E1000_NVM_RW_REG_DONE)
+			return E1000_SUCCESS;
+
+		usec_delay(5);
+	}
+
+	return -E1000_ERR_NVM;
+}
+
+/**
+ *  e1000_acquire_nvm_generic - Generic request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 e1000_acquire_nvm_generic(struct e1000_hw *hw)
+{
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+
+	DEBUGFUNC("e1000_acquire_nvm_generic");
+
+	E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ);
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	while (timeout) {
+		if (eecd & E1000_EECD_GNT)
+			break;
+		usec_delay(5);
+		eecd = E1000_READ_REG(hw, E1000_EECD);
+		timeout--;
+	}
+
+	if (!timeout) {
+		eecd &= ~E1000_EECD_REQ;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		DEBUGOUT("Could not acquire NVM grant\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_standby_nvm - Return EEPROM to standby state
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the EEPROM to a standby state.
+ **/
+static void e1000_standby_nvm(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+
+	DEBUGFUNC("e1000_standby_nvm");
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+		eecd &= ~E1000_EECD_CS;
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+	}
+}
+
+/**
+ *  e1000_stop_nvm - Terminate EEPROM command
+ *  @hw: pointer to the HW structure
+ *
+ *  Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("e1000_stop_nvm");
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+		/* Pull CS high */
+		eecd |= E1000_EECD_CS;
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+}
+
+/**
+ *  e1000_release_nvm_generic - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void e1000_release_nvm_generic(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("e1000_release_nvm_generic");
+
+	e1000_stop_nvm(hw);
+
+	eecd = E1000_READ_REG(hw, E1000_EECD);
+	eecd &= ~E1000_EECD_REQ;
+	E1000_WRITE_REG(hw, E1000_EECD, eecd);
+}
+
+/**
+ *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups the EEPROM for reading and writing.
+ **/
+static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
+	u8 spi_stat_reg;
+
+	DEBUGFUNC("e1000_ready_nvm_eeprom");
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		u16 timeout = NVM_MAX_RETRY_SPI;
+
+		/* Clear SK and CS */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		E1000_WRITE_REG(hw, E1000_EECD, eecd);
+		E1000_WRITE_FLUSH(hw);
+		usec_delay(1);
+
+		/* Read "Status Register" repeatedly until the LSB is cleared.
+		 * The EEPROM will signal that the command has been completed
+		 * by clearing bit 0 of the internal status register.  If it's
+		 * not cleared within 'timeout', then error out.
+		 */
+		while (timeout) {
+			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+						 hw->nvm.opcode_bits);
+			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
+			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+				break;
+
+			usec_delay(5);
+			e1000_standby_nvm(hw);
+			timeout--;
+		}
+
+		if (!timeout) {
+			DEBUGOUT("SPI NVM Status error\n");
+			return -E1000_ERR_NVM;
+		}
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_nvm_spi - Read EEPROM's using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u16 word_in;
+	u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+	DEBUGFUNC("e1000_read_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	e1000_standby_nvm(hw);
+
+	if ((nvm->address_bits == 8) && (offset >= 128))
+		read_opcode |= NVM_A8_OPCODE_SPI;
+
+	/* Send the READ command (opcode + addr) */
+	e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+	e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+	/* Read the data.  SPI NVMs increment the address with each byte
+	 * read and will roll over if reading beyond the end.  This allows
+	 * us to read the whole NVM from any offset
+	 */
+	for (i = 0; i < words; i++) {
+		word_in = e1000_shift_in_eec_bits(hw, 16);
+		data[i] = (word_in >> 8) | (word_in << 8);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_nvm_eerd - Reads EEPROM using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eerd = 0;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_read_nvm_eerd");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+		       E1000_NVM_RW_REG_START;
+
+		E1000_WRITE_REG(hw, E1000_EERD, eerd);
+		ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+		if (ret_val)
+			break;
+
+		data[i] = (E1000_READ_REG(hw, E1000_EERD) >>
+			   E1000_NVM_RW_REG_DATA);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_nvm_spi - Write to EEPROM using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val = -E1000_ERR_NVM;
+	u16 widx = 0;
+
+	DEBUGFUNC("e1000_write_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	while (widx < words) {
+		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+		ret_val = nvm->ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1000_ready_nvm_eeprom(hw);
+		if (ret_val) {
+			nvm->ops.release(hw);
+			return ret_val;
+		}
+
+		e1000_standby_nvm(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+					 nvm->opcode_bits);
+
+		e1000_standby_nvm(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((nvm->address_bits == 8) && (offset >= 128))
+			write_opcode |= NVM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+					 nvm->address_bits);
+
+		/* Loop to allow for up to whole page write of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+			word_out = (word_out >> 8) | (word_out << 8);
+			e1000_shift_out_eec_bits(hw, word_out, 16);
+			widx++;
+
+			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+				e1000_standby_nvm(hw);
+				break;
+			}
+		}
+		msec_delay(10);
+		nvm->ops.release(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_pba_string_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	DEBUGFUNC("e1000_read_pba_string_generic");
+
+	if (pba_num == NULL) {
+		DEBUGOUT("PBA string buffer was null\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	/* if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		DEBUGOUT("NVM PBA number is not stored as string\n");
+
+		/* make sure callers buffer is big enough to store the PBA */
+		if (pba_num_size < E1000_PBANUM_LENGTH) {
+			DEBUGOUT("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (nvm_data >> 12) & 0xF;
+		pba_num[1] = (nvm_data >> 8) & 0xF;
+		pba_num[2] = (nvm_data >> 4) & 0xF;
+		pba_num[3] = nvm_data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return E1000_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size < (((u32)length * 2) - 1)) {
+		DEBUGOUT("PBA string buffer too small\n");
+		return -E1000_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(nvm_data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_pba_length_generic - Read device part number length
+ *  @hw: pointer to the HW structure
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number length from the EEPROM and
+ *  stores the value in pba_num_size.
+ **/
+s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 length;
+
+	DEBUGFUNC("e1000_read_pba_length_generic");
+
+	if (pba_num_size == NULL) {
+		DEBUGOUT("PBA buffer size was null\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	 /* if data is not ptr guard the PBA must be in legacy format */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		*pba_num_size = E1000_PBANUM_LENGTH;
+		return E1000_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+
+	/* Convert from length in u16 values to u8 chars, add 1 for NULL,
+	 * and subtract 2 because length field is included in length.
+	 */
+	*pba_num_size = ((u32)length * 2) - 1;
+
+	return E1000_SUCCESS;
+}
+
+
+
+
+
+/**
+ *  e1000_read_mac_addr_generic - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the EEPROM and stores the value.
+ *  Since devices with two ports use the same EEPROM, we increment the
+ *  last bit in the MAC address for the second port.
+ **/
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = E1000_READ_REG(hw, E1000_RAH(0));
+	rar_low = E1000_READ_REG(hw, E1000_RAL(0));
+
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	for (i = 0; i < ETH_ADDR_LEN; i++)
+		hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_validate_nvm_checksum_generic");
+
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16) NVM_SUM) {
+		DEBUGOUT("NVM Checksum Invalid\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_update_nvm_checksum_generic - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("e1000_update_nvm_checksum");
+
+	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error while updating checksum.\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16) NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+	if (ret_val)
+		DEBUGOUT("NVM Write Error while updating checksum.\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000_reload_nvm_generic - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+static void e1000_reload_nvm_generic(struct e1000_hw *hw)
+{
+	u32 ctrl_ext;
+
+	DEBUGFUNC("e1000_reload_nvm_generic");
+
+	usec_delay(10);
+	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+	E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ *  e1000_get_fw_version - Get firmware version information
+ *  @hw: pointer to the HW structure
+ *  @fw_vers: pointer to output version structure
+ *
+ *  unsupported/not present features return 0 in version structure
+ **/
+void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
+{
+	u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
+	u8 q, hval, rem, result;
+	u16 comb_verh, comb_verl, comb_offset;
+
+	memset(fw_vers, 0, sizeof(struct e1000_fw_version));
+
+	/* basic eeprom version numbers, bits used vary by part and by tool
+	 * used to create the nvm images */
+	/* Check which data format we have */
+	hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+	switch (hw->mac.type) {
+	case e1000_i211:
+		e1000_read_invm_version(hw, fw_vers);
+		return;
+	case e1000_82575:
+	case e1000_82576:
+	case e1000_82580:
+		/* Use this format, unless EETRACK ID exists,
+		 * then use alternate format
+		 */
+		if ((etrack_test &  NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
+			hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+			fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+					      >> NVM_MAJOR_SHIFT;
+			fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK)
+					      >> NVM_MINOR_SHIFT;
+			fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
+			goto etrack_id;
+		}
+		break;
+	case e1000_i210:
+		if (!(e1000_get_flash_presence_i210(hw))) {
+			e1000_read_invm_version(hw, fw_vers);
+			return;
+		}
+		/* fall through */
+	case e1000_i350:
+	case e1000_i354:
+		/* find combo image version */
+		hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
+		if ((comb_offset != 0x0) &&
+		    (comb_offset != NVM_VER_INVALID)) {
+
+			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
+					 + 1), 1, &comb_verh);
+			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
+					 1, &comb_verl);
+
+			/* get Option Rom version if it exists and is valid */
+			if ((comb_verh && comb_verl) &&
+			    ((comb_verh != NVM_VER_INVALID) &&
+			     (comb_verl != NVM_VER_INVALID))) {
+
+				fw_vers->or_valid = true;
+				fw_vers->or_major =
+					comb_verl >> NVM_COMB_VER_SHFT;
+				fw_vers->or_build =
+					(comb_verl << NVM_COMB_VER_SHFT)
+					| (comb_verh >> NVM_COMB_VER_SHFT);
+				fw_vers->or_patch =
+					comb_verh & NVM_COMB_VER_MASK;
+			}
+		}
+		break;
+	default:
+		return;
+	}
+	hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+	fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+			      >> NVM_MAJOR_SHIFT;
+
+	/* check for old style version format in newer images*/
+	if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
+		eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
+	} else {
+		eeprom_verl = (fw_version & NVM_MINOR_MASK)
+				>> NVM_MINOR_SHIFT;
+	}
+	/* Convert minor value to hex before assigning to output struct
+	 * Val to be converted will not be higher than 99, per tool output
+	 */
+	q = eeprom_verl / NVM_HEX_CONV;
+	hval = q * NVM_HEX_TENS;
+	rem = eeprom_verl % NVM_HEX_CONV;
+	result = hval + rem;
+	fw_vers->eep_minor = result;
+
+etrack_id:
+	if ((etrack_test &  NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
+		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
+		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
+		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
+			| eeprom_verl;
+	}
+	return;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.h b/kernel/linux/kni/ethtool/igb/e1000_nvm.h
new file mode 100644
index 0000000..e27b1c0
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+
+struct e1000_fw_version {
+	u32 etrack_id;
+	u16 eep_major;
+	u16 eep_minor;
+	u16 eep_build;
+
+	u8 invm_major;
+	u8 invm_minor;
+	u8 invm_img_type;
+
+	bool or_valid;
+	u16 or_major;
+	u16 or_build;
+	u16 or_patch;
+};
+
+
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw);
+s32  e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c);
+void e1000_null_nvm_generic(struct e1000_hw *hw);
+s32  e1000_null_led_default(struct e1000_hw *hw, u16 *data);
+s32  e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c);
+s32  e1000_acquire_nvm_generic(struct e1000_hw *hw);
+
+s32  e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
+s32  e1000_read_mac_addr_generic(struct e1000_hw *hw);
+s32  e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				   u32 pba_num_size);
+s32  e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size);
+s32  e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32  e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+			 u16 *data);
+s32  e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data);
+s32  e1000_validate_nvm_checksum_generic(struct e1000_hw *hw);
+s32  e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+			 u16 *data);
+s32  e1000_update_nvm_checksum_generic(struct e1000_hw *hw);
+void e1000_release_nvm_generic(struct e1000_hw *hw);
+void e1000_get_fw_version(struct e1000_hw *hw,
+			  struct e1000_fw_version *fw_vers);
+
+#define E1000_STM_OPCODE	0xDB00
+
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_osdep.h b/kernel/linux/kni/ethtool/igb/e1000_osdep.h
new file mode 100644
index 0000000..3228100
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_osdep.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/sched.h>
+#include "kcompat.h"
+
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+#define usec_delay(x) udelay(x)
+#define usec_delay_irq(x) udelay(x)
+#ifndef msec_delay
+#define msec_delay(x) do { \
+	/* Don't mdelay in interrupt context! */ \
+	if (in_interrupt()) \
+		BUG(); \
+	else \
+		msleep(x); \
+} while (0)
+
+/* Some workarounds require millisecond delays and are run during interrupt
+ * context.  Most notably, when establishing link, the phy may need tweaking
+ * but cannot process phy register reads/writes faster than millisecond
+ * intervals...and we establish link due to a "link status change" interrupt.
+ */
+#define msec_delay_irq(x) mdelay(x)
+#endif
+
+#define PCI_COMMAND_REGISTER   PCI_COMMAND
+#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
+#define ETH_ADDR_LEN           ETH_ALEN
+
+#ifdef __BIG_ENDIAN
+#define E1000_BIG_ENDIAN __BIG_ENDIAN
+#endif
+
+
+#ifdef DEBUG
+#define DEBUGOUT(S) printk(KERN_DEBUG S)
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#ifdef DEBUG_FUNC
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#else
+#define DEBUGFUNC(F)
+#endif
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+#define E1000_REGISTER(a, reg) reg
+
+#define E1000_WRITE_REG(a, reg, value) ( \
+    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg))))
+
+#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg)))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+    readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+    writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+    readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+    writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+    readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))
+
+#define E1000_WRITE_REG_IO(a, reg, offset) do { \
+    outl(reg, ((a)->io_base));                  \
+    outl(offset, ((a)->io_base + 4));      } while (0)
+
+#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
+
+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
+    writel((value), ((a)->flash_address + reg)))
+
+#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
+    writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
+
+#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.c b/kernel/linux/kni/ethtool/igb/e1000_phy.c
new file mode 100644
index 0000000..1934a30
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_phy.c
@@ -0,0 +1,3392 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_api.h"
+
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] = {
+	0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+		(sizeof(e1000_m88_cable_length_table) / \
+		 sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+	124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+		(sizeof(e1000_igp_2_cable_length_table) / \
+		 sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ *  e1000_init_phy_ops_generic - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void e1000_init_phy_ops_generic(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	DEBUGFUNC("e1000_init_phy_ops_generic");
+
+	/* Initialize function pointers */
+	phy->ops.init_params = e1000_null_ops_generic;
+	phy->ops.acquire = e1000_null_ops_generic;
+	phy->ops.check_polarity = e1000_null_ops_generic;
+	phy->ops.check_reset_block = e1000_null_ops_generic;
+	phy->ops.commit = e1000_null_ops_generic;
+	phy->ops.force_speed_duplex = e1000_null_ops_generic;
+	phy->ops.get_cfg_done = e1000_null_ops_generic;
+	phy->ops.get_cable_length = e1000_null_ops_generic;
+	phy->ops.get_info = e1000_null_ops_generic;
+	phy->ops.set_page = e1000_null_set_page;
+	phy->ops.read_reg = e1000_null_read_reg;
+	phy->ops.read_reg_locked = e1000_null_read_reg;
+	phy->ops.read_reg_page = e1000_null_read_reg;
+	phy->ops.release = e1000_null_phy_generic;
+	phy->ops.reset = e1000_null_ops_generic;
+	phy->ops.set_d0_lplu_state = e1000_null_lplu_state;
+	phy->ops.set_d3_lplu_state = e1000_null_lplu_state;
+	phy->ops.write_reg = e1000_null_write_reg;
+	phy->ops.write_reg_locked = e1000_null_write_reg;
+	phy->ops.write_reg_page = e1000_null_write_reg;
+	phy->ops.power_up = e1000_null_phy_generic;
+	phy->ops.power_down = e1000_null_phy_generic;
+	phy->ops.read_i2c_byte = e1000_read_i2c_byte_null;
+	phy->ops.write_i2c_byte = e1000_write_i2c_byte_null;
+}
+
+/**
+ *  e1000_null_set_page - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw,
+			u16 E1000_UNUSEDARG data)
+{
+	DEBUGFUNC("e1000_null_set_page");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_read_reg - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw,
+			u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data)
+{
+	DEBUGFUNC("e1000_null_read_reg");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_phy_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_null_phy_generic");
+	return;
+}
+
+/**
+ *  e1000_null_lplu_state - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw,
+			  bool E1000_UNUSEDARG active)
+{
+	DEBUGFUNC("e1000_null_lplu_state");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_null_write_reg - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw,
+			 u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data)
+{
+	DEBUGFUNC("e1000_null_write_reg");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_i2c_byte_null - No-op function, return 0
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: data value read
+ *
+ **/
+s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw,
+			     u8 E1000_UNUSEDARG byte_offset,
+			     u8 E1000_UNUSEDARG dev_addr,
+			     u8 E1000_UNUSEDARG *data)
+{
+	DEBUGFUNC("e1000_read_i2c_byte_null");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_i2c_byte_null - No-op function, return 0
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: data value to write
+ *
+ **/
+s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw,
+			      u8 E1000_UNUSEDARG byte_offset,
+			      u8 E1000_UNUSEDARG dev_addr,
+			      u8 E1000_UNUSEDARG data)
+{
+	DEBUGFUNC("e1000_write_i2c_byte_null");
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_check_reset_block_generic - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the PHY management control register and check whether a PHY reset
+ *  is blocked.  If a reset is not blocked return E1000_SUCCESS, otherwise
+ *  return E1000_BLK_PHY_RESET (12).
+ **/
+s32 e1000_check_reset_block_generic(struct e1000_hw *hw)
+{
+	u32 manc;
+
+	DEBUGFUNC("e1000_check_reset_block");
+
+	manc = E1000_READ_REG(hw, E1000_MANC);
+
+	return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+	       E1000_BLK_PHY_RESET : E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_phy_id - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+s32 e1000_get_phy_id(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+	u16 phy_id;
+
+	DEBUGFUNC("e1000_get_phy_id");
+
+	if (!phy->ops.read_reg)
+		return E1000_SUCCESS;
+
+	ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+	if (ret_val)
+		return ret_val;
+
+	phy->id = (u32)(phy_id << 16);
+	usec_delay(20);
+	ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+	if (ret_val)
+		return ret_val;
+
+	phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+	phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_reset_dsp_generic - Reset PHY DSP
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the digital signal processor.
+ **/
+s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_phy_reset_dsp_generic");
+
+	if (!hw->phy.ops.write_reg)
+		return E1000_SUCCESS;
+
+	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+	if (ret_val)
+		return ret_val;
+
+	return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+}
+
+/**
+ *  e1000_read_phy_reg_mdic - Read MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	DEBUGFUNC("e1000_read_phy_reg_mdic");
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", offset);
+		return -E1000_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_READ));
+
+	E1000_WRITE_REG(hw, E1000_MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		usec_delay_irq(50);
+		mdic = E1000_READ_REG(hw, E1000_MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		DEBUGOUT("MDI Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		DEBUGOUT("MDI Error\n");
+		return -E1000_ERR_PHY;
+	}
+	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+		DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n",
+			  offset,
+			  (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+		return -E1000_ERR_PHY;
+	}
+	*data = (u16) mdic;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_phy_reg_mdic - Write MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	DEBUGFUNC("e1000_write_phy_reg_mdic");
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", offset);
+		return -E1000_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = (((u32)data) |
+		(offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_WRITE));
+
+	E1000_WRITE_REG(hw, E1000_MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		usec_delay_irq(50);
+		mdic = E1000_READ_REG(hw, E1000_MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		DEBUGOUT("MDI Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		DEBUGOUT("MDI Error\n");
+		return -E1000_ERR_PHY;
+	}
+	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+		DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n",
+			  offset,
+			  (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+		return -E1000_ERR_PHY;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_phy_reg_i2c - Read PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the i2c interface and stores the
+ *  retrieved information in data.
+ **/
+s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+
+	DEBUGFUNC("e1000_read_phy_reg_i2c");
+
+	/* Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+		  (E1000_I2CCMD_OPCODE_READ));
+
+	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	/* Need to byte-swap the 16-bit value. */
+	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_phy_reg_i2c - Write PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+	u16 phy_data_swapped;
+
+	DEBUGFUNC("e1000_write_phy_reg_i2c");
+
+	/* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
+	if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
+		DEBUGOUT1("PHY I2C Address %d is out of range.\n",
+			  hw->phy.addr);
+		return -E1000_ERR_CONFIG;
+	}
+
+	/* Swap the data bytes for the I2C interface */
+	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+	/* Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+		  E1000_I2CCMD_OPCODE_WRITE |
+		  phy_data_swapped);
+
+	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_sfp_data_byte - Reads SFP module data.
+ *  @hw: pointer to the HW structure
+ *  @offset: byte location offset to be read
+ *  @data: read data buffer pointer
+ *
+ *  Reads one byte from SFP module data stored
+ *  in SFP resided EEPROM memory or SFP diagnostic area.
+ *  Function should be called with
+ *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ *  access
+ **/
+s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
+{
+	u32 i = 0;
+	u32 i2ccmd = 0;
+	u32 data_local = 0;
+
+	DEBUGFUNC("e1000_read_sfp_data_byte");
+
+	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
+		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
+		return -E1000_ERR_PHY;
+	}
+
+	/* Set up Op-code, EEPROM Address,in the I2CCMD
+	 * register. The MAC will take care of interfacing with the
+	 * EEPROM to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+		  E1000_I2CCMD_OPCODE_READ);
+
+	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		data_local = E1000_READ_REG(hw, E1000_I2CCMD);
+		if (data_local & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(data_local & E1000_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (data_local & E1000_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+	*data = (u8) data_local & 0xFF;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_sfp_data_byte - Writes SFP module data.
+ *  @hw: pointer to the HW structure
+ *  @offset: byte location offset to write to
+ *  @data: data to write
+ *
+ *  Writes one byte to SFP module data stored
+ *  in SFP resided EEPROM memory or SFP diagnostic area.
+ *  Function should be called with
+ *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ *  access
+ **/
+s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data)
+{
+	u32 i = 0;
+	u32 i2ccmd = 0;
+	u32 data_local = 0;
+
+	DEBUGFUNC("e1000_write_sfp_data_byte");
+
+	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
+		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
+		return -E1000_ERR_PHY;
+	}
+	/* The programming interface is 16 bits wide
+	 * so we need to read the whole word first
+	 * then update appropriate byte lane and write
+	 * the updated word back.
+	 */
+	/* Set up Op-code, EEPROM Address,in the I2CCMD
+	 * register. The MAC will take care of interfacing
+	 * with an EEPROM to write the data given.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+		  E1000_I2CCMD_OPCODE_READ);
+	/* Set a command to read single word */
+	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		/* Poll the ready bit to see if lastly
+		 * launched I2C operation completed
+		 */
+		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY) {
+			/* Check if this is READ or WRITE phase */
+			if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) ==
+			    E1000_I2CCMD_OPCODE_READ) {
+				/* Write the selected byte
+				 * lane and update whole word
+				 */
+				data_local = i2ccmd & 0xFF00;
+				data_local |= data;
+				i2ccmd = ((offset <<
+					E1000_I2CCMD_REG_ADDR_SHIFT) |
+					E1000_I2CCMD_OPCODE_WRITE | data_local);
+				E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
+			} else {
+				break;
+			}
+		}
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_phy_reg_m88 - Read m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_read_phy_reg_m88");
+
+	if (!hw->phy.ops.acquire)
+		return E1000_SUCCESS;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					  data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_m88 - Write m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("e1000_write_phy_reg_m88");
+
+	if (!hw->phy.ops.acquire)
+		return E1000_SUCCESS;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_set_page_igp - Set page as on IGP-like PHY(s)
+ *  @hw: pointer to the HW structure
+ *  @page: page to set (shifted left when necessary)
+ *
+ *  Sets PHY page required for PHY register access.  Assumes semaphore is
+ *  already acquired.  Note, this function sets phy.addr to 1 so the caller
+ *  must set it appropriately (if necessary) after this function returns.
+ **/
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
+{
+	DEBUGFUNC("e1000_set_page_igp");
+
+	DEBUGOUT1("Setting page 0x%x\n", page);
+
+	hw->phy.addr = 1;
+
+	return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
+}
+
+/**
+ *  __e1000_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and stores the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+				    bool locked)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("__e1000_read_phy_reg_igp");
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return E1000_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = e1000_write_phy_reg_mdic(hw,
+						   IGP01E1000_PHY_PAGE_SELECT,
+						   (u16)offset);
+	if (!ret_val)
+		ret_val = e1000_read_phy_reg_mdic(hw,
+						  MAX_PHY_REG_ADDRESS & offset,
+						  data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores the
+ *  retrieved information in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000_read_phy_reg_igp_locked - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  e1000_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+				     bool locked)
+{
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_write_phy_reg_igp");
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return E1000_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = e1000_write_phy_reg_mdic(hw,
+						   IGP01E1000_PHY_PAGE_SELECT,
+						   (u16)offset);
+	if (!ret_val)
+		ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
+						       offset,
+						   data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000_write_phy_reg_igp_locked - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  __e1000_read_kmrn_reg - Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then reads the PHY register at offset
+ *  using the kumeran interface.  The information retrieved is stored in data.
+ *  Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+				 bool locked)
+{
+	u32 kmrnctrlsta;
+
+	DEBUGFUNC("__e1000_read_kmrn_reg");
+
+	if (!locked) {
+		s32 ret_val = E1000_SUCCESS;
+
+		if (!hw->phy.ops.acquire)
+			return E1000_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+	E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
+	E1000_WRITE_FLUSH(hw);
+
+	usec_delay(2);
+
+	kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA);
+	*data = (u16)kmrnctrlsta;
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_read_kmrn_reg_generic -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset using the
+ *  kumeran interface.  The information retrieved is stored in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  e1000_read_kmrn_reg_locked -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the kumeran interface.  The
+ *  information retrieved is stored in data.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  __e1000_write_kmrn_reg - Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then write the data to PHY register
+ *  at the offset using the kumeran interface.  Release any acquired semaphores
+ *  before exiting.
+ **/
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+				  bool locked)
+{
+	u32 kmrnctrlsta;
+
+	DEBUGFUNC("e1000_write_kmrn_reg_generic");
+
+	if (!locked) {
+		s32 ret_val = E1000_SUCCESS;
+
+		if (!hw->phy.ops.acquire)
+			return E1000_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | data;
+	E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
+	E1000_WRITE_FLUSH(hw);
+
+	usec_delay(2);
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_kmrn_reg_generic -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to the PHY register at the offset
+ *  using the kumeran interface.  Release the acquired semaphore before exiting.
+ **/
+s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  e1000_write_kmrn_reg_locked -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Write the data to PHY register at the offset using the kumeran interface.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  e1000_set_master_slave_mode - Setup PHY for Master/slave mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Master/slave mode
+ **/
+static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Resolve Master/Slave mode */
+	ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* load defaults for future use */
+	hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+				   ((phy_data & CR_1000T_MS_VALUE) ?
+				    e1000_ms_force_master :
+				    e1000_ms_force_slave) : e1000_ms_auto;
+
+	switch (hw->phy.ms_type) {
+	case e1000_ms_force_master:
+		phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+		break;
+	case e1000_ms_force_slave:
+		phy_data |= CR_1000T_MS_ENABLE;
+		phy_data &= ~(CR_1000T_MS_VALUE);
+		break;
+	case e1000_ms_auto:
+		phy_data &= ~CR_1000T_MS_ENABLE;
+		/* fall-through */
+	default:
+		break;
+	}
+
+	return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}
+
+/**
+ *  e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_setup_82577");
+
+	if (hw->phy.reset_disable)
+		return E1000_SUCCESS;
+
+	if (hw->phy.type == e1000_phy_82580) {
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			DEBUGOUT("Error resetting the PHY.\n");
+			return ret_val;
+		}
+	}
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Set MDI/MDIX mode */
+	ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+	/* Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	return e1000_set_master_slave_mode(hw);
+}
+
+/**
+ *  e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for m88 PHY's.  If necessary, transmit clock
+ *  and downshift values are set also.
+ **/
+s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_setup_m88");
+
+	if (phy->reset_disable)
+		return E1000_SUCCESS;
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+		break;
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->revision < E1000_REVISION_4) {
+		/* Force TX_CLK in the Extended PHY Specific Control Register
+		 * to 25MHz clock.
+		 */
+		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+		if ((phy->revision == E1000_REVISION_2) &&
+		    (phy->id == M88E1111_I_PHY_ID)) {
+			/* 82573L PHY - set the downshift counter to 5x. */
+			phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+		} else {
+			/* Configure Master and Slave downshift values */
+			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+		}
+		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Commit the changes. */
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ *  Also enables and sets the downshift parameters.
+ **/
+s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("e1000_copper_link_setup_m88_gen2");
+
+	if (phy->reset_disable)
+		return E1000_SUCCESS;
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		/* M88E1112 does not support this mode) */
+		if (phy->id != M88E1112_E_PHY_ID) {
+			phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+			break;
+		}
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+	/* Enable downshift and setting it to X6 */
+	if (phy->id == M88E1543_E_PHY_ID) {
+		phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE;
+		ret_val =
+		    phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.commit(hw);
+		if (ret_val) {
+			DEBUGOUT("Error committing the PHY changes\n");
+			return ret_val;
+		}
+	}
+
+	phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Commit the changes. */
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	ret_val = e1000_set_master_slave_mode(hw);
+	if (ret_val)
+		return ret_val;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_copper_link_setup_igp - Setup igp PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ *  igp PHY's.
+ **/
+s32 e1000_copper_link_setup_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("e1000_copper_link_setup_igp");
+
+	if (phy->reset_disable)
+		return E1000_SUCCESS;
+
+	ret_val = hw->phy.ops.reset(hw);
+	if (ret_val) {
+		DEBUGOUT("Error resetting the PHY.\n");
+		return ret_val;
+	}
+
+	/* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+	 * timeout issues when LFS is enabled.
+	 */
+	msec_delay(100);
+
+	/* disable lplu d0 during driver init */
+	if (hw->phy.ops.set_d0_lplu_state) {
+		ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+		if (ret_val) {
+			DEBUGOUT("Error Disabling LPLU D0\n");
+			return ret_val;
+		}
+	}
+	/* Configure mdi-mdix settings */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+	switch (phy->mdix) {
+	case 1:
+		data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 2:
+		data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 0:
+	default:
+		data |= IGP01E1000_PSCR_AUTO_MDIX;
+		break;
+	}
+	ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* set auto-master slave resolution settings */
+	if (hw->mac.autoneg) {
+		/* when autonegotiation advertisement is only 1000Mbps then we
+		 * should disable SmartSpeed and enable Auto MasterSlave
+		 * resolution as hardware default.
+		 */
+		if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+			/* Disable SmartSpeed */
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+
+			/* Set auto Master/Slave resolution process */
+			ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~CR_1000T_MS_ENABLE;
+			ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+			if (ret_val)
+				return ret_val;
+		}
+
+		ret_val = e1000_set_master_slave_mode(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MII auto-neg advertisement register and/or the 1000T control
+ *  register and if the PHY is already setup for auto-negotiation, then
+ *  return successful.  Otherwise, setup advertisement and flow control to
+ *  the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg = 0;
+
+	DEBUGFUNC("e1000_phy_setup_autoneg");
+
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+		/* Read the MII 1000Base-T Control Register (Address 9). */
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+					    &mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Need to parse both autoneg_advertised and fc and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+				 NWAY_AR_100TX_HD_CAPS |
+				 NWAY_AR_10T_FD_CAPS   |
+				 NWAY_AR_10T_HD_CAPS);
+	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+	DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+	/* Do we want to advertise 10 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+		DEBUGOUT("Advertise 10mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+	}
+
+	/* Do we want to advertise 10 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+		DEBUGOUT("Advertise 10mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+		DEBUGOUT("Advertise 100mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+		DEBUGOUT("Advertise 100mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+	}
+
+	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+		DEBUGOUT("Advertise 1000mb Half duplex request denied!\n");
+
+	/* Do we want to advertise 1000 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+		DEBUGOUT("Advertise 1000mb Full duplex\n");
+		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+	}
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the PHY advertisement registers accordingly.  If
+	 * auto-negotiation is enabled, then software will have to set the
+	 * "PAUSE" bits to the correct value in the Auto-Negotiation
+	 * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+	 * negotiation.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          but we do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 *  other:  No software override.  The flow control configuration
+	 *          in the EEPROM is used.
+	 */
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		/* Flow control (Rx & Tx) is completely disabled by a
+		 * software over-ride.
+		 */
+		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case e1000_fc_rx_pause:
+		/* Rx Flow control is enabled, and Tx Flow control is
+		 * disabled, by a software over-ride.
+		 *
+		 * Since there really isn't a way to advertise that we are
+		 * capable of Rx Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric Rx PAUSE.  Later
+		 * (in e1000_config_fc_after_link_up) we will disable the
+		 * hw's ability to send PAUSE frames.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case e1000_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+		break;
+	case e1000_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL)
+		ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL,
+					     mii_1000t_ctrl_reg);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs initial bounds checking on autoneg advertisement parameter, then
+ *  configure to advertise the full capability.  Setup the PHY to autoneg
+ *  and restart the negotiation process between the link partner.  If
+ *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	DEBUGFUNC("e1000_copper_link_autoneg");
+
+	/* Perform some bounds checking on the autoneg advertisement
+	 * parameter.
+	 */
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* If autoneg_advertised is zero, we assume it was not defaulted
+	 * by the calling code so we set to advertise full capability.
+	 */
+	if (!phy->autoneg_advertised)
+		phy->autoneg_advertised = phy->autoneg_mask;
+
+	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+	ret_val = e1000_phy_setup_autoneg(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	DEBUGOUT("Restarting Auto-Neg\n");
+
+	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
+	 * the Auto Neg Restart bit in the PHY control register.
+	 */
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	/* Does the user want to wait for Auto-Neg to complete here, or
+	 * check at a later time (for example, callback routine).
+	 */
+	if (phy->autoneg_wait_to_complete) {
+		ret_val = e1000_wait_autoneg(hw);
+		if (ret_val) {
+			DEBUGOUT("Error while waiting for autoneg to complete\n");
+			return ret_val;
+		}
+	}
+
+	hw->mac.get_link_status = true;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_setup_copper_link_generic - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 e1000_setup_copper_link_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	bool link;
+
+	DEBUGFUNC("e1000_setup_copper_link_generic");
+
+	if (hw->mac.autoneg) {
+		/* Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = e1000_copper_link_autoneg(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		DEBUGOUT("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			DEBUGOUT("Error Forcing Speed and Duplex\n");
+			return ret_val;
+		}
+	}
+
+	/* Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+					     &link);
+	if (ret_val)
+		return ret_val;
+
+	if (link) {
+		DEBUGOUT("Valid link established!!!\n");
+		hw->mac.ops.config_collision_dist(hw);
+		ret_val = e1000_config_fc_after_link_up_generic(hw);
+	} else {
+		DEBUGOUT("Unable to establish link!!!\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex_igp");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+	phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("IGP PSCR: %X\n", phy_data);
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n");
+
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Resets the PHY to commit the
+ *  changes.  If time expires while waiting for link up, we reset the DSP.
+ *  After reset, TX_CLK and CRS on Tx must be set.  Return successful upon
+ *  successful completion, else return corresponding error code.
+ **/
+s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex_m88");
+
+	/* I210 and I211 devices support Auto-Crossover in forced operation. */
+	if (phy->type != e1000_phy_i210) {
+		/* Clear Auto-Crossover to force MDI manually.  M88E1000
+		 * requires MDI forced whenever speed and duplex are forced.
+		 */
+		ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+		ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data);
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Reset the phy to commit changes. */
+	ret_val = hw->phy.ops.commit(hw);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n");
+
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link) {
+			bool reset_dsp = true;
+
+			switch (hw->phy.id) {
+			case I347AT4_E_PHY_ID:
+			case M88E1340M_E_PHY_ID:
+			case M88E1112_E_PHY_ID:
+			case M88E1543_E_PHY_ID:
+			case I210_I_PHY_ID:
+				reset_dsp = false;
+				break;
+			default:
+				if (hw->phy.type != e1000_phy_m88)
+					reset_dsp = false;
+				break;
+			}
+
+			if (!reset_dsp) {
+				DEBUGOUT("Link taking longer than expected.\n");
+			} else {
+				/* We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = phy->ops.write_reg(hw,
+						M88E1000_PHY_PAGE_SELECT,
+						0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = e1000_phy_reset_dsp_generic(hw);
+				if (ret_val)
+					return ret_val;
+			}
+		}
+
+		/* Try once more */
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type != e1000_phy_m88)
+		return E1000_SUCCESS;
+
+	if (hw->phy.id == I347AT4_E_PHY_ID ||
+		hw->phy.id == M88E1340M_E_PHY_ID ||
+		hw->phy.id == M88E1112_E_PHY_ID)
+		return E1000_SUCCESS;
+	if (hw->phy.id == I210_I_PHY_ID)
+		return E1000_SUCCESS;
+	if ((hw->phy.id == M88E1543_E_PHY_ID))
+		return E1000_SUCCESS;
+	ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Resetting the phy means we need to re-force TX_CLK in the
+	 * Extended PHY Specific Control Register to 25MHz clock from
+	 * the reset value of 2.5MHz.
+	 */
+	phy_data |= M88E1000_EPSCR_TX_CLK_25;
+	ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* In addition, we must re-enable CRS on Tx for both half and full
+	 * duplex.
+	 */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex_ife");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	e1000_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("IFE PMC: %X\n", data);
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ *  Forces speed and duplex on the PHY by doing the following: disable flow
+ *  control, force speed/duplex on the MAC, disable auto speed detection,
+ *  disable auto-negotiation, configure duplex, configure speed, configure
+ *  the collision distance, write configuration to CTRL register.  The
+ *  caller must write to the PHY_CONTROL register for these settings to
+ *  take affect.
+ **/
+void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex_setup");
+
+	/* Turn off flow control when forcing speed/duplex */
+	hw->fc.current_mode = e1000_fc_none;
+
+	/* Force speed/duplex on the mac */
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ctrl &= ~E1000_CTRL_SPD_SEL;
+
+	/* Disable Auto Speed Detection */
+	ctrl &= ~E1000_CTRL_ASDE;
+
+	/* Disable autoneg on the phy */
+	*phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+	/* Forcing Full or Half Duplex? */
+	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+		ctrl &= ~E1000_CTRL_FD;
+		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Half Duplex\n");
+	} else {
+		ctrl |= E1000_CTRL_FD;
+		*phy_ctrl |= MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Full Duplex\n");
+	}
+
+	/* Forcing 10mb or 100mb? */
+	if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+		ctrl |= E1000_CTRL_SPD_100;
+		*phy_ctrl |= MII_CR_SPEED_100;
+		*phy_ctrl &= ~MII_CR_SPEED_1000;
+		DEBUGOUT("Forcing 100mb\n");
+	} else {
+		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+		DEBUGOUT("Forcing 10mb\n");
+	}
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+}
+
+/**
+ *  e1000_set_d3_lplu_state_generic - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("e1000_set_d3_lplu_state_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return E1000_SUCCESS;
+
+	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (!active) {
+		data &= ~IGP02E1000_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			return ret_val;
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= IGP02E1000_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			return ret_val;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					    &data);
+		if (ret_val)
+			return ret_val;
+
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					     data);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_downshift_generic - Checks whether a downshift in speed occurred
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  A downshift is detected by querying the PHY link health.
+ **/
+s32 e1000_check_downshift_generic(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	DEBUGFUNC("e1000_check_downshift_generic");
+
+	switch (phy->type) {
+	case e1000_phy_i210:
+	case e1000_phy_m88:
+	case e1000_phy_gg82563:
+		offset = M88E1000_PHY_SPEC_STATUS;
+		mask = M88E1000_PSSR_DOWNSHIFT;
+		break;
+	case e1000_phy_igp_2:
+	case e1000_phy_igp_3:
+		offset = IGP01E1000_PHY_LINK_HEALTH;
+		mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+		break;
+	default:
+		/* speed downshift not supported */
+		phy->speed_downgraded = false;
+		return E1000_SUCCESS;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->speed_downgraded = !!(phy_data & mask);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_m88 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("e1000_check_polarity_m88");
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_igp - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY port status register, and the
+ *  current speed (since there is no polarity at 100Mbps).
+ **/
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data, offset, mask;
+
+	DEBUGFUNC("e1000_check_polarity_igp");
+
+	/* Polarity is determined based on the speed of
+	 * our connection.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		offset = IGP01E1000_PHY_PCS_INIT_REG;
+		mask = IGP01E1000_PHY_POLARITY_MASK;
+	} else {
+		/* This really only applies to 10Mbps since
+		 * there is no polarity for 100Mbps (always 0).
+		 */
+		offset = IGP01E1000_PHY_PORT_STATUS;
+		mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & mask)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	DEBUGFUNC("e1000_check_polarity_ife");
+
+	/* Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((phy_data & mask)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_wait_autoneg - Wait for auto-neg completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Waits for auto-negotiation to complete or for the auto-negotiation time
+ *  limit to expire, which ever happens first.
+ **/
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 i, phy_status;
+
+	DEBUGFUNC("e1000_wait_autoneg");
+
+	if (!hw->phy.ops.read_reg)
+		return E1000_SUCCESS;
+
+	/* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+	for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_AUTONEG_COMPLETE)
+			break;
+		msec_delay(100);
+	}
+
+	/* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+	 * has completed.
+	 */
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_has_link_generic - Polls PHY for link
+ *  @hw: pointer to the HW structure
+ *  @iterations: number of times to poll for link
+ *  @usec_interval: delay between polling attempts
+ *  @success: pointer to whether polling was successful or not
+ *
+ *  Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+			       u32 usec_interval, bool *success)
+{
+	s32 ret_val = E1000_SUCCESS;
+	u16 i, phy_status;
+
+	DEBUGFUNC("e1000_phy_has_link_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return E1000_SUCCESS;
+
+	for (i = 0; i < iterations; i++) {
+		/* Some PHYs require the PHY_STATUS register to be read
+		 * twice due to the link bit being sticky.  No harm doing
+		 * it across the board.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			/* If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			usec_delay(usec_interval);
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_LINK_STATUS)
+			break;
+		if (usec_interval >= 1000)
+			msec_delay_irq(usec_interval/1000);
+		else
+			usec_delay(usec_interval);
+	}
+
+	*success = (i < iterations);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cable_length_m88 - Determine cable length for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY specific status register to retrieve the cable length
+ *  information.  The cable length is determined by averaging the minimum and
+ *  maximum values to get the "average" cable length.  The m88 PHY has four
+ *  possible cable length values, which are:
+ *	Register Value		Cable Length
+ *	0			< 50 meters
+ *	1			50 - 80 meters
+ *	2			80 - 110 meters
+ *	3			110 - 140 meters
+ *	4			> 140 meters
+ **/
+s32 e1000_get_cable_length_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, index;
+
+	DEBUGFUNC("e1000_get_cable_length_m88");
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+		 M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
+		return -E1000_ERR_PHY;
+
+	phy->min_cable_length = e1000_m88_cable_length_table[index];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return E1000_SUCCESS;
+}
+
+s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, phy_data2, is_cm;
+	u16 index, default_page;
+
+	DEBUGFUNC("e1000_get_cable_length_m88_gen2");
+
+	switch (hw->phy.id) {
+	case I210_I_PHY_ID:
+		/* Get cable length from PHY Cable Diagnostics Control Reg */
+		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+					    (I347AT4_PCDL + phy->addr),
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Check if the unit of cable length is meters or cm */
+		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+					    I347AT4_PCDC, &phy_data2);
+		if (ret_val)
+			return ret_val;
+
+		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+		/* Populate the phy structure with cable length in meters */
+		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+		break;
+	case M88E1543_E_PHY_ID:
+	case M88E1340M_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
+		/* Remember the original page select and set it to 7 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+		if (ret_val)
+			return ret_val;
+
+		/* Get cable length from PHY Cable Diagnostics Control Reg */
+		ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Check if the unit of cable length is meters or cm */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+		if (ret_val)
+			return ret_val;
+
+		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+		/* Populate the phy structure with cable length in meters */
+		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+		/* Reset the page select to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			return ret_val;
+		break;
+
+	case M88E1112_E_PHY_ID:
+		/* Remember the original page select and set it to 5 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+			M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+		if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
+			return -E1000_ERR_PHY;
+
+		phy->min_cable_length = e1000_m88_cable_length_table[index];
+		phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+		phy->cable_length = (phy->min_cable_length +
+				     phy->max_cable_length) / 2;
+
+		/* Reset the page select to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			return ret_val;
+
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  The automatic gain control (agc) normalizes the amplitude of the
+ *  received signal, adjusting for the attenuation produced by the
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of coarse and fine gain value, the value can be put
+ *  into a lookup table to obtain the approximate cable length
+ *  for each channel.
+ **/
+s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, i, agc_value = 0;
+	u16 cur_agc_index, max_agc_index = 0;
+	u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+	static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+		IGP02E1000_PHY_AGC_A,
+		IGP02E1000_PHY_AGC_B,
+		IGP02E1000_PHY_AGC_C,
+		IGP02E1000_PHY_AGC_D
+	};
+
+	DEBUGFUNC("e1000_get_cable_length_igp_2");
+
+	/* Read the AGC registers for all channels */
+	for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+		ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Getting bits 15:9, which represent the combination of
+		 * coarse and fine gain values.  The result is a number
+		 * that can be put into the lookup table to obtain the
+		 * approximate cable length.
+		 */
+		cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+				 IGP02E1000_AGC_LENGTH_MASK);
+
+		/* Array index bound check. */
+		if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+		    (cur_agc_index == 0))
+			return -E1000_ERR_PHY;
+
+		/* Remove min & max AGC values from calculation. */
+		if (e1000_igp_2_cable_length_table[min_agc_index] >
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			min_agc_index = cur_agc_index;
+		if (e1000_igp_2_cable_length_table[max_agc_index] <
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			max_agc_index = cur_agc_index;
+
+		agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+	}
+
+	agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+		      e1000_igp_2_cable_length_table[max_agc_index]);
+	agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+	/* Calculate cable length with the error range of +/- 10 meters. */
+	phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+				 (agc_value - IGP02E1000_AGC_RANGE) : 0);
+	phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_phy_info_m88 - Retrieve PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Valid for only copper links.  Read the PHY status register (sticky read)
+ *  to verify that link is up.  Read the PHY special control register to
+ *  determine the polarity and 10base-T extended distance.  Read the PHY
+ *  special status register to determine MDI/MDIx and current speed.  If
+ *  speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32  ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("e1000_get_phy_info_m88");
+
+	if (phy->media_type != e1000_media_type_copper) {
+		DEBUGOUT("Phy info is only valid for copper media\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->polarity_correction = !!(phy_data &
+				      M88E1000_PSCR_POLARITY_REVERSAL);
+
+	ret_val = e1000_check_polarity_m88(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
+
+	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+				? e1000_1000t_rx_status_ok
+				: e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+				 ? e1000_1000t_rx_status_ok
+				 : e1000_1000t_rx_status_not_ok;
+	} else {
+		/* Set values to "undefined" */
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_igp - Retrieve igp PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("e1000_get_phy_info_igp");
+
+	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_igp(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		ret_val = phy->ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+				? e1000_1000t_rx_status_ok
+				: e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+				 ? e1000_1000t_rx_status_ok
+				 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("e1000_get_phy_info_ife");
+
+	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+	phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
+
+	if (phy->polarity_correction) {
+		ret_val = e1000_check_polarity_ife(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+	}
+
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = e1000_1000t_rx_status_undefined;
+	phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_sw_reset_generic - PHY software reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Does a software reset of the PHY by reading the PHY control register and
+ *  setting/write the control register reset bit to the PHY.
+ **/
+s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	DEBUGFUNC("e1000_phy_sw_reset_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return E1000_SUCCESS;
+
+	ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= MII_CR_RESET;
+	ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	usec_delay(1);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_hw_reset_generic - PHY hardware reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify the reset block is not blocking us from resetting.  Acquire
+ *  semaphore (if necessary) and read/set/write the device control reset
+ *  bit in the PHY.  Wait the appropriate delay time for the device to
+ *  reset and release the semaphore (if necessary).
+ **/
+s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 ctrl;
+
+	DEBUGFUNC("e1000_phy_hw_reset_generic");
+
+	if (phy->ops.check_reset_block) {
+		ret_val = phy->ops.check_reset_block(hw);
+		if (ret_val)
+			return E1000_SUCCESS;
+	}
+
+	ret_val = phy->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+	E1000_WRITE_FLUSH(hw);
+
+	usec_delay(phy->reset_delay_us);
+
+	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+	E1000_WRITE_FLUSH(hw);
+
+	usec_delay(150);
+
+	phy->ops.release(hw);
+
+	return phy->ops.get_cfg_done(hw);
+}
+
+/**
+ *  e1000_get_cfg_done_generic - Generic configuration done
+ *  @hw: pointer to the HW structure
+ *
+ *  Generic function to wait 10 milli-seconds for configuration to complete
+ *  and return success.
+ **/
+s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw)
+{
+	DEBUGFUNC("e1000_get_cfg_done_generic");
+
+	msec_delay_irq(10);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_phy_init_script_igp3 - Inits the IGP3 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 e1000_phy_init_script_igp3(struct e1000_hw *hw)
+{
+	DEBUGOUT("Running IGP 3 PHY init script\n");
+
+	/* PHY init IGP 3 */
+	/* Enable rise/fall, 10-mode work in class-A */
+	hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+	/* Remove all caps from Replica path filter */
+	hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+	/* Bias trimming for ADC, AFE and Driver (Default) */
+	hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+	/* Increase Hybrid poly bias */
+	hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+	/* Add 4% to Tx amplitude in Gig mode */
+	hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+	/* Disable trimming (TTT) */
+	hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+	/* Poly DC correction to 94.6% + 2% for all channels */
+	hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+	/* ABS DC correction to 95.9% */
+	hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+	/* BG temp curve trim */
+	hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+	/* Increasing ADC OPAMP stage 1 currents to max */
+	hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+	/* Force 1000 ( required for enabling PHY regs configuration) */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+	/* Set upd_freq to 6 */
+	hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+	/* Disable NPDFE */
+	hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+	/* Disable adaptive fixed FFE (Default) */
+	hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+	/* Enable FFE hysteresis */
+	hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+	/* Fixed FFE for short cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+	/* Fixed FFE for medium cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+	/* Fixed FFE for long cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+	/* Enable Adaptive Clip Threshold */
+	hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+	/* AHT reset limit to 1 */
+	hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+	/* Set AHT master delay to 127 msec */
+	hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+	/* Set scan bits for AHT */
+	hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+	/* Set AHT Preset bits */
+	hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+	/* Change integ_factor of channel A to 3 */
+	hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+	/* Change prop_factor of channels BCD to 8 */
+	hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+	/* Change cg_icount + enable integbp for channels BCD */
+	hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+	/* Change cg_icount + enable integbp + change prop_factor_master
+	 * to 8 for channel A
+	 */
+	hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+	/* Disable AHT in Slave mode on channel A */
+	hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+	/* Enable LPLU and disable AN to 1000 in non-D0a states,
+	 * Enable SPD+B2B
+	 */
+	hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+	/* Enable restart AN on an1000_dis change */
+	hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+	/* Enable wh_fifo read clock in 10/100 modes */
+	hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+	/* Restart AN, Speed selection is 1000 */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_phy_type_from_id - Get PHY type from id
+ *  @phy_id: phy_id read from the phy
+ *
+ *  Returns the phy type from the id.
+ **/
+enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id)
+{
+	enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+	switch (phy_id) {
+	case M88E1000_I_PHY_ID:
+	case M88E1000_E_PHY_ID:
+	case M88E1111_I_PHY_ID:
+	case M88E1011_I_PHY_ID:
+	case M88E1543_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
+	case M88E1112_E_PHY_ID:
+	case M88E1340M_E_PHY_ID:
+		phy_type = e1000_phy_m88;
+		break;
+	case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
+		phy_type = e1000_phy_igp_2;
+		break;
+	case GG82563_E_PHY_ID:
+		phy_type = e1000_phy_gg82563;
+		break;
+	case IGP03E1000_E_PHY_ID:
+		phy_type = e1000_phy_igp_3;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy_type = e1000_phy_ife;
+		break;
+	case I82580_I_PHY_ID:
+		phy_type = e1000_phy_82580;
+		break;
+	case I210_I_PHY_ID:
+		phy_type = e1000_phy_i210;
+		break;
+	default:
+		phy_type = e1000_phy_unknown;
+		break;
+	}
+	return phy_type;
+}
+
+/**
+ *  e1000_determine_phy_address - Determines PHY address.
+ *  @hw: pointer to the HW structure
+ *
+ *  This uses a trial and error method to loop through possible PHY
+ *  addresses. It tests each by reading the PHY ID registers and
+ *  checking for a match.
+ **/
+s32 e1000_determine_phy_address(struct e1000_hw *hw)
+{
+	u32 phy_addr = 0;
+	u32 i;
+	enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
+			e1000_get_phy_id(hw);
+			phy_type = e1000_get_phy_type_from_id(hw->phy.id);
+
+			/* If phy_type is valid, break - we found our
+			 * PHY address
+			 */
+			if (phy_type != e1000_phy_unknown)
+				return E1000_SUCCESS;
+
+			msec_delay(1);
+			i++;
+		} while (i < 10);
+	}
+
+	return -E1000_ERR_PHY_TYPE;
+}
+
+/**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+	u16 power_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	if (hw->phy.type == e1000_phy_i210) {
+		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+		power_reg &= ~GS40G_CS_POWER_DOWN;
+		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+	}
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+	u16 power_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	/* i210 Phy requires an additional bit for power up/down */
+	if (hw->phy.type == e1000_phy_i210) {
+		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+		power_reg |= GS40G_CS_POWER_DOWN;
+		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+	}
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+	msec_delay(1);
+}
+
+/**
+ *  e1000_check_polarity_82577 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("e1000_check_polarity_82577");
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.
+ **/
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("e1000_phy_force_speed_duplex_82577");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n");
+
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_82577 - Retrieve I82577 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("e1000_get_phy_info_82577");
+
+	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_82577(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
+
+	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+				? e1000_1000t_rx_status_ok
+				: e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+				 ? e1000_1000t_rx_status_ok
+				 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+	DEBUGFUNC("e1000_get_cable_length_82577");
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+		  I82577_DSTATUS_CABLE_LENGTH_SHIFT);
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		return -E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_phy_reg_gs40g - Write GS40G  PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = offset >> GS40G_PAGE_SHIFT;
+
+	DEBUGFUNC("e1000_write_phy_reg_gs40g");
+
+	offset = offset & GS40G_OFFSET_MASK;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+	if (ret_val)
+		goto release;
+	ret_val = e1000_write_phy_reg_mdic(hw, offset, data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_gs40g - Read GS40G  PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: lower half is register offset to read to
+ *     upper half is page to use.
+ *  @data: data to read at register offset
+ *
+ *  Acquires semaphore, if necessary, then reads the data in the PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = offset >> GS40G_PAGE_SHIFT;
+
+	DEBUGFUNC("e1000_read_phy_reg_gs40g");
+
+	offset = offset & GS40G_OFFSET_MASK;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+	if (ret_val)
+		goto release;
+	ret_val = e1000_read_phy_reg_mdic(hw, offset, data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_mphy - Read mPHY control register
+ *  @hw: pointer to the HW structure
+ *  @address: address to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the mPHY control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data)
+{
+	u32 mphy_ctrl = 0;
+	bool locked = false;
+	bool ready = false;
+
+	DEBUGFUNC("e1000_read_phy_reg_mphy");
+
+	/* Check if mPHY is ready to read/write operations */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+
+	/* Check if mPHY access is disabled and enable it if so */
+	mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL);
+	if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) {
+		locked = true;
+		ready = e1000_is_mphy_ready(hw);
+		if (!ready)
+			return -E1000_ERR_PHY;
+		mphy_ctrl |= E1000_MPHY_ENA_ACCESS;
+		E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl);
+	}
+
+	/* Set the address that we want to read */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+
+	/* We mask address, because we want to use only current lane */
+	mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK &
+		~E1000_MPHY_ADDRESS_FNC_OVERRIDE) |
+		(address & E1000_MPHY_ADDRESS_MASK);
+	E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl);
+
+	/* Read data from the address */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+	*data = E1000_READ_REG(hw, E1000_MPHY_DATA);
+
+	/* Disable access to mPHY if it was originally disabled */
+	if (locked) {
+		ready = e1000_is_mphy_ready(hw);
+		if (!ready)
+			return -E1000_ERR_PHY;
+		E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
+				E1000_MPHY_DIS_ACCESS);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_write_phy_reg_mphy - Write mPHY control register
+ *  @hw: pointer to the HW structure
+ *  @address: address to write to
+ *  @data: data to write to register at offset
+ *  @line_override: used when we want to use different line than default one
+ *
+ *  Writes data to mPHY control register.
+ **/
+s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data,
+			     bool line_override)
+{
+	u32 mphy_ctrl = 0;
+	bool locked = false;
+	bool ready = false;
+
+	DEBUGFUNC("e1000_write_phy_reg_mphy");
+
+	/* Check if mPHY is ready to read/write operations */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+
+	/* Check if mPHY access is disabled and enable it if so */
+	mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL);
+	if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) {
+		locked = true;
+		ready = e1000_is_mphy_ready(hw);
+		if (!ready)
+			return -E1000_ERR_PHY;
+		mphy_ctrl |= E1000_MPHY_ENA_ACCESS;
+		E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl);
+	}
+
+	/* Set the address that we want to read */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+
+	/* We mask address, because we want to use only current lane */
+	if (line_override)
+		mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE;
+	else
+		mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE;
+	mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) |
+		(address & E1000_MPHY_ADDRESS_MASK);
+	E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl);
+
+	/* Read data from the address */
+	ready = e1000_is_mphy_ready(hw);
+	if (!ready)
+		return -E1000_ERR_PHY;
+	E1000_WRITE_REG(hw, E1000_MPHY_DATA, data);
+
+	/* Disable access to mPHY if it was originally disabled */
+	if (locked) {
+		ready = e1000_is_mphy_ready(hw);
+		if (!ready)
+			return -E1000_ERR_PHY;
+		E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
+				E1000_MPHY_DIS_ACCESS);
+	}
+
+	return E1000_SUCCESS;
+}
+
+/**
+ *  e1000_is_mphy_ready - Check if mPHY control register is not busy
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns mPHY control register status.
+ **/
+bool e1000_is_mphy_ready(struct e1000_hw *hw)
+{
+	u16 retry_count = 0;
+	u32 mphy_ctrl = 0;
+	bool ready = false;
+
+	while (retry_count < 2) {
+		mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL);
+		if (mphy_ctrl & E1000_MPHY_BUSY) {
+			usec_delay(20);
+			retry_count++;
+			continue;
+		}
+		ready = true;
+		break;
+	}
+
+	if (!ready)
+		DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n");
+
+	return ready;
+}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.h b/kernel/linux/kni/ethtool/igb/e1000_phy.h
new file mode 100644
index 0000000..67e9ba7
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_phy.h
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+void e1000_init_phy_ops_generic(struct e1000_hw *hw);
+s32  e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+void e1000_null_phy_generic(struct e1000_hw *hw);
+s32  e1000_null_lplu_state(struct e1000_hw *hw, bool active);
+s32  e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_null_set_page(struct e1000_hw *hw, u16 data);
+s32 e1000_read_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset,
+			     u8 dev_addr, u8 *data);
+s32 e1000_write_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset,
+			      u8 dev_addr, u8 data);
+s32  e1000_check_downshift_generic(struct e1000_hw *hw);
+s32  e1000_check_polarity_m88(struct e1000_hw *hw);
+s32  e1000_check_polarity_igp(struct e1000_hw *hw);
+s32  e1000_check_polarity_ife(struct e1000_hw *hw);
+s32  e1000_check_reset_block_generic(struct e1000_hw *hw);
+s32  e1000_copper_link_setup_igp(struct e1000_hw *hw);
+s32  e1000_copper_link_setup_m88(struct e1000_hw *hw);
+s32  e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw);
+s32  e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32  e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32  e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+s32  e1000_get_cable_length_m88(struct e1000_hw *hw);
+s32  e1000_get_cable_length_m88_gen2(struct e1000_hw *hw);
+s32  e1000_get_cable_length_igp_2(struct e1000_hw *hw);
+s32  e1000_get_cfg_done_generic(struct e1000_hw *hw);
+s32  e1000_get_phy_id(struct e1000_hw *hw);
+s32  e1000_get_phy_info_igp(struct e1000_hw *hw);
+s32  e1000_get_phy_info_m88(struct e1000_hw *hw);
+s32  e1000_get_phy_info_ife(struct e1000_hw *hw);
+s32  e1000_phy_sw_reset_generic(struct e1000_hw *hw);
+void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+s32  e1000_phy_hw_reset_generic(struct e1000_hw *hw);
+s32  e1000_phy_reset_dsp_generic(struct e1000_hw *hw);
+s32  e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_set_page_igp(struct e1000_hw *hw, u16 page);
+s32  e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active);
+s32  e1000_setup_copper_link_generic(struct e1000_hw *hw);
+s32  e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+				u32 usec_interval, bool *success);
+s32  e1000_phy_init_script_igp3(struct e1000_hw *hw);
+enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id);
+s32  e1000_determine_phy_address(struct e1000_hw *hw);
+s32  e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+s32  e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+void e1000_power_up_phy_copper(struct e1000_hw *hw);
+void e1000_power_down_phy_copper(struct e1000_hw *hw);
+s32  e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+s32  e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data);
+s32  e1000_copper_link_setup_82577(struct e1000_hw *hw);
+s32  e1000_check_polarity_82577(struct e1000_hw *hw);
+s32  e1000_get_phy_info_82577(struct e1000_hw *hw);
+s32  e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+s32  e1000_get_cable_length_82577(struct e1000_hw *hw);
+s32  e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32  e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data);
+s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data,
+			     bool line_override);
+bool e1000_is_mphy_ready(struct e1000_hw *hw);
+
+#define E1000_MAX_PHY_ADDR		8
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG	0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS	0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL	0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH	0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT	0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT	0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT		22   /* Page Select for BM */
+#define IGP_PAGE_SHIFT			5
+#define PHY_REG_MASK			0x1F
+
+/* GS40G - I210 PHY defines */
+#define GS40G_PAGE_SELECT		0x16
+#define GS40G_PAGE_SHIFT		16
+#define GS40G_OFFSET_MASK		0xFFFF
+#define GS40G_PAGE_2			0x20000
+#define GS40G_MAC_REG2			0x15
+#define GS40G_MAC_LB			0x4140
+#define GS40G_MAC_SPEED_1G		0X0006
+#define GS40G_COPPER_SPEC		0x0010
+#define GS40G_CS_POWER_DOWN		0x0002
+
+#define HV_INTC_FC_PAGE_START		768
+#define I82578_ADDR_REG			29
+#define I82577_ADDR_REG			16
+#define I82577_CFG_REG			22
+#define I82577_CFG_ASSERT_CRS_ON_TX	(1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT	(3 << 10) /* auto downshift */
+#define I82577_CTRL_REG			23
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2		18
+#define I82577_PHY_LBK_CTRL		19
+#define I82577_PHY_STATUS_2		26
+#define I82577_PHY_DIAG_STATUS		31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY		0x0400
+#define I82577_PHY_STATUS2_MDIX			0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK		0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS	0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_MANUAL_MDIX		0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX		0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK		0x0600
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH		0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT	2
+
+/* 82580 PHY Power Management */
+#define E1000_82580_PHY_POWER_MGMT	0xE14
+#define E1000_82580_PM_SPD		0x0001 /* Smart Power Down */
+#define E1000_82580_PM_D0_LPLU		0x0002 /* For D0a states */
+#define E1000_82580_PM_D3_LPLU		0x0004 /* For all other states */
+#define E1000_82580_PM_GO_LINKD		0x0020 /* Go Link Disconnect */
+
+#define E1000_MPHY_DIS_ACCESS		0x80000000 /* disable_access bit */
+#define E1000_MPHY_ENA_ACCESS		0x40000000 /* enable_access bit */
+#define E1000_MPHY_BUSY			0x00010000 /* busy bit */
+#define E1000_MPHY_ADDRESS_FNC_OVERRIDE	0x20000000 /* fnc_override bit */
+#define E1000_MPHY_ADDRESS_MASK		0x0000FFFF /* address mask */
+
+#define IGP01E1000_PHY_PCS_INIT_REG	0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK	0x0078
+
+#define IGP01E1000_PSCR_AUTO_MDIX	0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX	0x2000 /* 0=MDI, 1=MDIX */
+
+#define IGP01E1000_PSCFR_SMART_SPEED	0x0080
+
+#define IGP02E1000_PM_SPD		0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D0_LPLU		0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU		0x0004 /* For all other states */
+
+#define IGP01E1000_PLHR_SS_DOWNGRADE	0x8000
+
+#define IGP01E1000_PSSR_POLARITY_REVERSED	0x0002
+#define IGP01E1000_PSSR_MDIX		0x0800
+#define IGP01E1000_PSSR_SPEED_MASK	0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS	0xC000
+
+#define IGP02E1000_PHY_CHANNEL_NUM	4
+#define IGP02E1000_PHY_AGC_A		0x11B1
+#define IGP02E1000_PHY_AGC_B		0x12B1
+#define IGP02E1000_PHY_AGC_C		0x14B1
+#define IGP02E1000_PHY_AGC_D		0x18B1
+
+#define IGP02E1000_AGC_LENGTH_SHIFT	9   /* Course=15:13, Fine=12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK	0x7F
+#define IGP02E1000_AGC_RANGE		15
+
+#define E1000_CABLE_LENGTH_UNDEFINED	0xFF
+
+#define E1000_KMRNCTRLSTA_OFFSET	0x001F0000
+#define E1000_KMRNCTRLSTA_OFFSET_SHIFT	16
+#define E1000_KMRNCTRLSTA_REN		0x00200000
+#define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
+#define E1000_KMRNCTRLSTA_TIMEOUTS	0x4    /* Kumeran Timeouts */
+#define E1000_KMRNCTRLSTA_INBAND_PARAM	0x9    /* Kumeran InBand Parameters */
+#define E1000_KMRNCTRLSTA_IBIST_DISABLE	0x0200 /* Kumeran IBIST Disable */
+#define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
+#define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Ctrl */
+#define IFE_PHY_SPECIAL_CONTROL_LED	0x1B /* PHY Special and LED Ctrl */
+#define IFE_PHY_MDIX_CONTROL		0x1C /* MDI/MDI-X Control */
+
+/* IFE PHY Extended Status Control */
+#define IFE_PESC_POLARITY_REVERSED	0x0100
+
+/* IFE PHY Special Control */
+#define IFE_PSC_AUTO_POLARITY_DISABLE	0x0010
+#define IFE_PSC_FORCE_POLARITY		0x0020
+
+/* IFE PHY Special Control and LED Control */
+#define IFE_PSCL_PROBE_MODE		0x0020
+#define IFE_PSCL_PROBE_LEDS_OFF		0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON		0x0007 /* Force LEDs 0 and 2 on */
+
+/* IFE PHY MDIX Control */
+#define IFE_PMC_MDIX_STATUS		0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_FORCE_MDIX		0x0040 /* 1=force MDI-X, 0=force MDI */
+#define IFE_PMC_AUTO_MDIX		0x0080 /* 1=enable auto, 0=disable */
+
+/* SFP modules ID memory locations */
+#define E1000_SFF_IDENTIFIER_OFFSET	0x00
+#define E1000_SFF_IDENTIFIER_SFF	0x02
+#define E1000_SFF_IDENTIFIER_SFP	0x03
+
+#define E1000_SFF_ETH_FLAGS_OFFSET	0x06
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct sfp_e1000_flags {
+	u8 e1000_base_sx:1;
+	u8 e1000_base_lx:1;
+	u8 e1000_base_cx:1;
+	u8 e1000_base_t:1;
+	u8 e100_base_lx:1;
+	u8 e100_base_fx:1;
+	u8 e10_base_bx10:1;
+	u8 e10_base_px:1;
+};
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define E1000_SFF_VENDOR_OUI_TYCO	0x00407600
+#define E1000_SFF_VENDOR_OUI_FTL	0x00906500
+#define E1000_SFF_VENDOR_OUI_AVAGO	0x00176A00
+#define E1000_SFF_VENDOR_OUI_INTEL	0x001B2100
+
+#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_regs.h b/kernel/linux/kni/ethtool/igb/e1000_regs.h
new file mode 100644
index 0000000..f5c7e03
--- /dev/null
+++ b/kernel/linux/kni/ethtool/igb/e1000_regs.h
@@ -0,0 +1,631 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL	0x00000  /* Device Control - RW */
+#define E1000_STATUS	0x00008  /* Device Status - RO */
+#define E1000_EECD	0x00010  /* EEPROM/Flash Control - RW */
+#define E1000_EERD	0x00014  /* EEPROM Read - RW */
+#define E1000_CTRL_EXT	0x00018  /* Extended Device Control - RW */
+#define E1000_FLA	0x0001C  /* Flash Access - RW */
+#define E1000_MDIC	0x00020  /* MDI Control - RW */
+#define E1000_MDICNFG	0x00E04  /* MDI Config - RW */
+#define E1000_REGISTER_SET_SIZE		0x20000 /* CSR Size */
+#define E1000_EEPROM_INIT_CTRL_WORD_2	0x0F /* EEPROM Init Ctrl Word 2 */
+#define E1000_EEPROM_PCIE_CTRL_WORD_2	0x28 /* EEPROM PCIe Ctrl Word 2 */
+#define E1000_BARCTRL			0x5BBC /* BAR ctrl reg */
+#define E1000_BARCTRL_FLSIZE		0x0700 /* BAR ctrl Flsize */
+#define E1000_BARCTRL_CSRSIZE		0x2000 /* BAR ctrl CSR size */
+#define E1000_MPHY_ADDR_CTRL	0x0024 /* GbE MPHY Address Control */
+#define E1000_MPHY_DATA		0x0E10 /* GBE MPHY Data */
+#define E1000_MPHY_STAT		0x0E0C /* GBE MPHY Statistics */
+#define E1000_PPHY_CTRL		0x5b48 /* PCIe PHY Control */
+#define E1000_I350_BARCTRL		0x5BFC /* BAR ctrl reg */
+#define E1000_I350_DTXMXPKTSZ		0x355C /* Maximum sent packet size reg*/
+#define E1000_SCTL	0x00024  /* SerDes Control - RW */
+#define E1000_FCAL	0x00028  /* Flow Control Address Low - RW */
+#define E1000_FCAH	0x0002C  /* Flow Control Address High -RW */
+#define E1000_FCT	0x00030  /* Flow Control Type - RW */
+#define E1000_CONNSW	0x00034  /* Copper/Fiber switch control - RW */
+#define E1000_VET	0x00038  /* VLAN Ether Type - RW */
+#define E1000_ICR	0x000C0  /* Interrupt Cause Read - R/clr */
+#define E1000_ITR	0x000C4  /* Interrupt Throttling Rate - RW */
+#define E1000_ICS	0x000C8  /* Interrupt Cause Set - WO */
+#define E1000_IMS	0x000D0  /* Interrupt Mask Set - RW */
+#define E1000_IMC	0x000D8  /* Interrupt Mask Clear - WO */
+#define E1000_IAM	0x000E0  /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL	0x00100  /* Rx Control - RW */
+#define E1000_FCTTV	0x00170  /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW	0x00178  /* Tx Configuration Word - RW */
+#define E1000_RXCW	0x00180  /* Rx Configuration Word - RO */
+#define E1000_EICR	0x01580  /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n)	(0x01680 + (0x4 * (_n)))
+#define E1000_EICS	0x01520  /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS	0x01524  /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC	0x01528  /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC	0x0152C  /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM	0x01530  /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_GPIE	0x01514  /* General Purpose Interrupt Enable - RW */
+#define E1000_IVAR0	0x01700  /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC	0x01740 /* IVAR for "other" causes - RW */
+#define E1000_TCTL	0x00400  /* Tx Control - RW */
+#define E1000_TCTL_EXT	0x00404  /* Extended Tx Control - RW */
+#define E1000_TIPG	0x00410  /* Tx Inter-packet gap -RW */
+#define E1000_AIT	0x00458  /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL	0x00E00  /* LED Control - RW */
+#define E1000_LEDMUX	0x08130  /* LED MUX Control */
+#define E1000_EXTCNF_CTRL	0x00F00  /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE	0x00F08  /* Extended Configuration Size */
+#define E1000_PHY_CTRL	0x00F10  /* PHY Control Register in CSR */
+#define E1000_PBA	0x01000  /* Packet Buffer Allocation - RW */
+#define E1000_PBS	0x01008  /* Packet Buffer Size */
+#define E1000_EEMNGCTL	0x01010  /* MNG EEprom Control */
+#define E1000_EEARBC	0x01024  /* EEPROM Auto Read Bus Control */
+#define E1000_EEWR	0x0102C  /* EEPROM Write Register - RW */
+#define E1000_FLOP	0x0103C  /* FLASH Opcode Register */
+#define E1000_I2CCMD	0x01028  /* SFPI2C Command Register - RW */
+#define E1000_I2CPARAMS	0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN	0x00000100  /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT	0x00000200  /* I2C- Clock */
+#define E1000_I2C_DATA_OUT	0x00000400  /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N	0x00000800  /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN	0x00001000  /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N	0x00002000  /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN	0x00004000  /* I2C- Clock In */
+#define E1000_I2C_CLK_STRETCH_DIS	0x00008000 /* I2C- Dis Clk Stretching */
+#define E1000_WDSTP	0x01040  /* Watchdog Setup - RW */
+#define E1000_SWDSTS	0x01044  /* SW Device Status - RW */
+#define E1000_FRTIMER	0x01048  /* Free Running Timer - RW */
+#define E1000_TCPTIMER	0x0104C  /* TCP Timer - RW */
+#define E1000_VPDDIAG	0x01060  /* VPD Diagnostic - RO */
+#define E1000_ICR_V2	0x01500  /* Intr Cause - new location - RC */
+#define E1000_ICS_V2	0x01504  /* Intr Cause Set - new location - WO */