summaryrefslogtreecommitdiff
path: root/lib/librte_pmd_igb/e1000_ethdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/librte_pmd_igb/e1000_ethdev.c')
-rw-r--r--lib/librte_pmd_igb/e1000_ethdev.c1319
1 files changed, 1319 insertions, 0 deletions
diff --git a/lib/librte_pmd_igb/e1000_ethdev.c b/lib/librte_pmd_igb/e1000_ethdev.c
new file mode 100644
index 0000000..a984428
--- /dev/null
+++ b/lib/librte_pmd_igb/e1000_ethdev.c
@@ -0,0 +1,1319 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * version: DPDK.L.1.2.3-3
+ */
+
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdarg.h>
+
+#include <rte_common.h>
+#include <rte_interrupts.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_pci.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_atomic.h>
+#include <rte_malloc.h>
+
+#include "e1000_logs.h"
+#include "igb/e1000_api.h"
+#include "igb/e1000_hw.h"
+#include "e1000_ethdev.h"
+
+static int eth_igb_configure(struct rte_eth_dev *dev, uint16_t nb_rx_q,
+ uint16_t nb_tx_q);
+static int eth_igb_start(struct rte_eth_dev *dev);
+static void eth_igb_stop(struct rte_eth_dev *dev);
+static void eth_igb_close(struct rte_eth_dev *dev);
+static void eth_igb_promiscuous_enable(struct rte_eth_dev *dev);
+static void eth_igb_promiscuous_disable(struct rte_eth_dev *dev);
+static void eth_igb_allmulticast_enable(struct rte_eth_dev *dev);
+static void eth_igb_allmulticast_disable(struct rte_eth_dev *dev);
+static int eth_igb_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete);
+static void eth_igb_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *rte_stats);
+static void eth_igb_stats_reset(struct rte_eth_dev *dev);
+static void eth_igb_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info);
+static int eth_igb_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf);
+static int eth_igb_interrupt_setup(struct rte_eth_dev *dev);
+static int eth_igb_interrupt_get_status(struct rte_eth_dev *dev);
+static int eth_igb_interrupt_action(struct rte_eth_dev *dev);
+static void eth_igb_interrupt_handler(struct rte_intr_handle *handle,
+ void *param);
+static int igb_hardware_init(struct e1000_hw *hw);
+static void igb_hw_control_acquire(struct e1000_hw *hw);
+static void igb_hw_control_release(struct e1000_hw *hw);
+static void igb_init_manageability(struct e1000_hw *hw);
+static void igb_release_manageability(struct e1000_hw *hw);
+static void igb_vlan_hw_support_enable(struct rte_eth_dev *dev);
+static void igb_vlan_hw_support_disable(struct rte_eth_dev *dev);
+static void eth_igb_vlan_filter_set(struct rte_eth_dev *dev,
+ uint16_t vlan_id,
+ int on);
+static int eth_igb_led_on(struct rte_eth_dev *dev);
+static int eth_igb_led_off(struct rte_eth_dev *dev);
+
+static void igb_intr_disable(struct e1000_hw *hw);
+static int igb_get_rx_buffer_size(struct e1000_hw *hw);
+static void eth_igb_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, uint32_t pool);
+static void eth_igb_rar_clear(struct rte_eth_dev *dev, uint32_t index);
+
+#define IGB_FC_PAUSE_TIME 0x0680
+#define IGB_LINK_UPDATE_CHECK_TIMEOUT 90 /* 9s */
+#define IGB_LINK_UPDATE_CHECK_INTERVAL 100 /* ms */
+
+static enum e1000_fc_mode igb_fc_setting = e1000_fc_full;
+
+/*
+ * The set of PCI devices this driver supports
+ */
+static struct rte_pci_id pci_id_igb_map[] = {
+
+#undef RTE_LIBRTE_IXGBE_PMD
+#define RTE_PCI_DEV_ID_DECL(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
+#include "rte_pci_dev_ids.h"
+
+{.device_id = 0},
+};
+
+static struct eth_dev_ops eth_igb_ops = {
+ .dev_configure = eth_igb_configure,
+ .dev_start = eth_igb_start,
+ .dev_stop = eth_igb_stop,
+ .dev_close = eth_igb_close,
+ .promiscuous_enable = eth_igb_promiscuous_enable,
+ .promiscuous_disable = eth_igb_promiscuous_disable,
+ .allmulticast_enable = eth_igb_allmulticast_enable,
+ .allmulticast_disable = eth_igb_allmulticast_disable,
+ .link_update = eth_igb_link_update,
+ .stats_get = eth_igb_stats_get,
+ .stats_reset = eth_igb_stats_reset,
+ .dev_infos_get = eth_igb_infos_get,
+ .vlan_filter_set = eth_igb_vlan_filter_set,
+ .rx_queue_setup = eth_igb_rx_queue_setup,
+ .tx_queue_setup = eth_igb_tx_queue_setup,
+ .dev_led_on = eth_igb_led_on,
+ .dev_led_off = eth_igb_led_off,
+ .flow_ctrl_set = eth_igb_flow_ctrl_set,
+ .mac_addr_add = eth_igb_rar_set,
+ .mac_addr_remove = eth_igb_rar_clear,
+};
+
+/**
+ * Atomically reads the link status information from global
+ * structure rte_eth_dev.
+ *
+ * @param dev
+ * - Pointer to the structure rte_eth_dev to read from.
+ * - Pointer to the buffer to be saved with the link status.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, negative value.
+ */
+static inline int
+rte_igb_dev_atomic_read_link_status(struct rte_eth_dev *dev,
+ struct rte_eth_link *link)
+{
+ struct rte_eth_link *dst = link;
+ struct rte_eth_link *src = &(dev->data->dev_link);
+
+ if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+ *(uint64_t *)src) == 0)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Atomically writes the link status information into global
+ * structure rte_eth_dev.
+ *
+ * @param dev
+ * - Pointer to the structure rte_eth_dev to read from.
+ * - Pointer to the buffer to be saved with the link status.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, negative value.
+ */
+static inline int
+rte_igb_dev_atomic_write_link_status(struct rte_eth_dev *dev,
+ struct rte_eth_link *link)
+{
+ struct rte_eth_link *dst = &(dev->data->dev_link);
+ struct rte_eth_link *src = link;
+
+ if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+ *(uint64_t *)src) == 0)
+ return -1;
+
+ return 0;
+}
+
+static void
+igb_identify_hardware(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ hw->vendor_id = dev->pci_dev->id.vendor_id;
+ hw->device_id = dev->pci_dev->id.device_id;
+ hw->subsystem_vendor_id = dev->pci_dev->id.subsystem_vendor_id;
+ hw->subsystem_device_id = dev->pci_dev->id.subsystem_device_id;
+
+ e1000_set_mac_type(hw);
+
+ /* need to check if it is a vf device below */
+}
+
+static int
+eth_igb_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
+ struct rte_eth_dev *eth_dev)
+{
+ int error = 0;
+ struct rte_pci_device *pci_dev;
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+ struct e1000_vfta * shadow_vfta =
+ E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private);
+
+ pci_dev = eth_dev->pci_dev;
+ eth_dev->dev_ops = &eth_igb_ops;
+ eth_dev->rx_pkt_burst = &eth_igb_recv_pkts;
+ eth_dev->tx_pkt_burst = &eth_igb_xmit_pkts;
+
+ /* for secondary processes, we don't initialise any further as primary
+ * has already done this work. Only check we don't need a different
+ * RX function */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY){
+ if (eth_dev->data->scattered_rx)
+ eth_dev->rx_pkt_burst = &eth_igb_recv_scattered_pkts;
+ return 0;
+ }
+
+ hw->hw_addr= (void *)pci_dev->mem_resource.addr;
+
+ igb_identify_hardware(eth_dev);
+
+ if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS) {
+ error = -EIO;
+ goto err_late;
+ }
+
+ e1000_get_bus_info(hw);
+
+ hw->mac.autoneg = 1;
+ hw->phy.autoneg_wait_to_complete = 0;
+ hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = 0; /* AUTO_ALL_MODES */
+ hw->phy.disable_polarity_correction = 0;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ /*
+ * Start from a known state, this is important in reading the nvm
+ * and mac from that.
+ */
+ e1000_reset_hw(hw);
+
+ /* Make sure we have a good EEPROM before we read from it */
+ if (e1000_validate_nvm_checksum(hw) < 0) {
+ /*
+ * Some PCI-E parts fail the first check due to
+ * the link being in sleep state, call it again,
+ * if it fails a second time its a real issue.
+ */
+ if (e1000_validate_nvm_checksum(hw) < 0) {
+ PMD_INIT_LOG(ERR, "EEPROM checksum invalid");
+ error = -EIO;
+ goto err_late;
+ }
+ }
+
+ /* Read the permanent MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw) != 0) {
+ PMD_INIT_LOG(ERR, "EEPROM error while reading MAC address");
+ error = -EIO;
+ goto err_late;
+ }
+
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("e1000",
+ ETHER_ADDR_LEN * hw->mac.rar_entry_count, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
+ "store MAC addresses",
+ ETHER_ADDR_LEN * hw->mac.rar_entry_count);
+ error = -ENOMEM;
+ goto err_late;
+ }
+
+ /* Copy the permanent MAC address */
+ ether_addr_copy((struct ether_addr *)hw->mac.addr, &eth_dev->data->mac_addrs[0]);
+
+ /* initialize the vfta */
+ memset(shadow_vfta, 0, sizeof(*shadow_vfta));
+
+ /* Now initialize the hardware */
+ if (igb_hardware_init(hw) != 0) {
+ PMD_INIT_LOG(ERR, "Hardware initialization failed");
+ rte_free(eth_dev->data->mac_addrs);
+ eth_dev->data->mac_addrs = NULL;
+ error = -ENODEV;
+ goto err_late;
+ }
+ hw->mac.get_link_status = 1;
+
+ /* Indicate SOL/IDER usage */
+ if (e1000_check_reset_block(hw) < 0) {
+ PMD_INIT_LOG(ERR, "PHY reset is blocked due to"
+ "SOL/IDER session");
+ }
+
+ PMD_INIT_LOG(INFO, "port_id %d vendorID=0x%x deviceID=0x%x\n",
+ eth_dev->data->port_id, pci_dev->id.vendor_id,
+ pci_dev->id.device_id);
+
+ rte_intr_callback_register(&(pci_dev->intr_handle),
+ eth_igb_interrupt_handler, (void *)eth_dev);
+
+ return 0;
+
+err_late:
+ igb_hw_control_release(hw);
+
+ return (error);
+}
+
+static struct eth_driver rte_igb_pmd = {
+ {
+ .name = "rte_igb_pmd",
+ .id_table = pci_id_igb_map,
+ .drv_flags = RTE_PCI_DRV_NEED_IGB_UIO,
+ },
+ .eth_dev_init = eth_igb_dev_init,
+ .dev_private_size = sizeof(struct e1000_adapter),
+};
+
+int
+rte_igb_pmd_init(void)
+{
+ rte_eth_driver_register(&rte_igb_pmd);
+ return 0;
+}
+
+static int
+eth_igb_configure(struct rte_eth_dev *dev, uint16_t nb_rx_q, uint16_t nb_tx_q)
+{
+ struct e1000_interrupt *intr =
+ E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+ int diag;
+
+ PMD_INIT_LOG(DEBUG, ">>");
+
+ intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
+
+ /* Allocate the array of pointers to RX structures */
+ diag = igb_dev_rx_queue_alloc(dev, nb_rx_q);
+ if (diag != 0) {
+ PMD_INIT_LOG(ERR, "ethdev port_id=%u allocation of array of %u"
+ " pointers to RX queues failed",
+ dev->data->port_id, nb_rx_q);
+ return diag;
+ }
+
+ /* Allocate the array of pointers to TX structures */
+ diag = igb_dev_tx_queue_alloc(dev, nb_tx_q);
+ if (diag != 0) {
+ PMD_INIT_LOG(ERR, "ethdev port_id=%u allocation of array of %u"
+ " pointers to TX queues failed",
+ dev->data->port_id, nb_tx_q);
+
+ return diag;
+ }
+
+ PMD_INIT_LOG(DEBUG, "<<");
+
+ return (0);
+}
+
+static int
+eth_igb_start(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ int ret, i;
+
+ PMD_INIT_LOG(DEBUG, ">>");
+
+ igb_intr_disable(hw);
+
+ /* Power up the phy. Needed to make the link go Up */
+ e1000_power_up_phy(hw);
+
+ /*
+ * Packet Buffer Allocation (PBA)
+ * Writing PBA sets the receive portion of the buffer
+ * the remainder is used for the transmit buffer.
+ */
+ if (hw->mac.type == e1000_82575) {
+ uint32_t pba;
+
+ pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
+ E1000_WRITE_REG(hw, E1000_PBA, pba);
+ }
+
+ /* Put the address into the Receive Address Array */
+ e1000_rar_set(hw, hw->mac.addr, 0);
+
+ /* Initialize the hardware */
+ if (igb_hardware_init(hw)) {
+ PMD_INIT_LOG(ERR, "Unable to initialize the hardware");
+ return (-1);
+ }
+
+ E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
+
+ /* Configure for OS presence */
+ igb_init_manageability(hw);
+
+ eth_igb_tx_init(dev);
+
+ /* This can fail when allocating mbufs for descriptor rings */
+ ret = eth_igb_rx_init(dev);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
+ return ret;
+ }
+
+ e1000_clear_hw_cntrs_base_generic(hw);
+
+ /*
+ * If VLAN filtering is enabled, set up VLAN tag offload and filtering
+ * and restore the VFTA.
+ */
+ if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+ igb_vlan_hw_support_enable(dev);
+ else
+ igb_vlan_hw_support_disable(dev);
+
+ /*
+ * Configure the Interrupt Moderation register (EITR) with the maximum
+ * possible value (0xFFFF) to minimize "System Partial Write" issued by
+ * spurious [DMA] memory updates of RX and TX ring descriptors.
+ *
+ * With a EITR granularity of 2 microseconds in the 82576, only 7/8
+ * spurious memory updates per second should be expected.
+ * ((65535 * 2) / 1000.1000 ~= 0.131 second).
+ *
+ * Because interrupts are not used at all, the MSI-X is not activated
+ * and interrupt moderation is controlled by EITR[0].
+ *
+ * Note that having [almost] disabled memory updates of RX and TX ring
+ * descriptors through the Interrupt Moderation mechanism, memory
+ * updates of ring descriptors are now moderated by the configurable
+ * value of Write-Back Threshold registers.
+ */
+ if ((hw->mac.type == e1000_82576) || (hw->mac.type == e1000_82580) ||
+ (hw->mac.type == e1000_i350)) {
+ uint32_t ivar;
+
+ /* Enable all RX & TX queues in the IVAR registers */
+ ivar = (uint32_t) ((E1000_IVAR_VALID << 16) | E1000_IVAR_VALID);
+ for (i = 0; i < 8; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, i, ivar);
+
+ /* Configure EITR with the maximum possible value (0xFFFF) */
+ E1000_WRITE_REG(hw, E1000_EITR(0), 0xFFFF);
+ }
+
+ /* Don't reset the phy next time init gets called */
+ hw->phy.reset_disable = 1;
+
+ /* Setup link speed and duplex */
+ switch (dev->data->dev_conf.link_speed) {
+ case ETH_LINK_SPEED_AUTONEG:
+ if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
+ hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_HALF_DUPLEX)
+ hw->phy.autoneg_advertised = E1000_ALL_HALF_DUPLEX;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_FULL_DUPLEX)
+ hw->phy.autoneg_advertised = E1000_ALL_FULL_DUPLEX;
+ else
+ goto error_invalid_config;
+ break;
+ case ETH_LINK_SPEED_10:
+ if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
+ hw->phy.autoneg_advertised = E1000_ALL_10_SPEED;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_HALF_DUPLEX)
+ hw->phy.autoneg_advertised = ADVERTISE_10_HALF;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_FULL_DUPLEX)
+ hw->phy.autoneg_advertised = ADVERTISE_10_FULL;
+ else
+ goto error_invalid_config;
+ break;
+ case ETH_LINK_SPEED_100:
+ if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
+ hw->phy.autoneg_advertised = E1000_ALL_100_SPEED;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_HALF_DUPLEX)
+ hw->phy.autoneg_advertised = ADVERTISE_100_HALF;
+ else if (dev->data->dev_conf.link_duplex == ETH_LINK_FULL_DUPLEX)
+ hw->phy.autoneg_advertised = ADVERTISE_100_FULL;
+ else
+ goto error_invalid_config;
+ break;
+ case ETH_LINK_SPEED_1000:
+ if ((dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX) ||
+ (dev->data->dev_conf.link_duplex == ETH_LINK_FULL_DUPLEX))
+ hw->phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ else
+ goto error_invalid_config;
+ break;
+ case ETH_LINK_SPEED_10000:
+ default:
+ goto error_invalid_config;
+ }
+ e1000_setup_link(hw);
+
+ PMD_INIT_LOG(DEBUG, "<<");
+
+ /* check if lsc interrupt feature is enabled */
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
+ return eth_igb_interrupt_setup(dev);
+
+ return (0);
+
+error_invalid_config:
+ PMD_INIT_LOG(ERR, "Invalid link_speed/link_duplex (%u/%u) for port %u\n",
+ dev->data->dev_conf.link_speed,
+ dev->data->dev_conf.link_duplex, dev->data->port_id);
+ return -1;
+}
+
+/*********************************************************************
+ *
+ * This routine disables all traffic on the adapter by issuing a
+ * global reset on the MAC.
+ *
+ **********************************************************************/
+static void
+eth_igb_stop(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_eth_link link;
+
+ igb_intr_disable(hw);
+ e1000_reset_hw(hw);
+ E1000_WRITE_REG(hw, E1000_WUC, 0);
+
+ /* Power down the phy. Needed to make the link go Down */
+ e1000_power_down_phy(hw);
+
+ igb_dev_clear_queues(dev);
+
+ /* clear the recorded link status */
+ memset(&link, 0, sizeof(link));
+ rte_igb_dev_atomic_write_link_status(dev, &link);
+}
+
+static void
+eth_igb_close(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_eth_link link;
+
+ eth_igb_stop(dev);
+ e1000_phy_hw_reset(hw);
+ igb_release_manageability(hw);
+ igb_hw_control_release(hw);
+
+ igb_dev_clear_queues(dev);
+
+ memset(&link, 0, sizeof(link));
+ rte_igb_dev_atomic_write_link_status(dev, &link);
+}
+
+static int
+igb_get_rx_buffer_size(struct e1000_hw *hw)
+{
+ uint32_t rx_buf_size;
+ if (hw->mac.type == e1000_82576) {
+ rx_buf_size = (E1000_READ_REG(hw, E1000_RXPBS) & 0xffff) << 10;
+ } else if (hw->mac.type == e1000_82580) {
+ /* PBS needs to be translated according to a lookup table */
+ rx_buf_size = (E1000_READ_REG(hw, E1000_RXPBS) & 0xf);
+ rx_buf_size = (uint32_t) e1000_rxpbs_adjust_82580(rx_buf_size);
+ rx_buf_size = (rx_buf_size << 10);
+ } else {
+ rx_buf_size = (E1000_READ_REG(hw, E1000_PBA) & 0xffff) << 10;
+ }
+
+ return rx_buf_size;
+}
+
+/*********************************************************************
+ *
+ * Initialize the hardware
+ *
+ **********************************************************************/
+static int
+igb_hardware_init(struct e1000_hw *hw)
+{
+ uint32_t rx_buf_size;
+ int diag;
+
+ /* Let the firmware know the OS is in control */
+ igb_hw_control_acquire(hw);
+
+ /*
+ * These parameters control the automatic generation (Tx) and
+ * response (Rx) to Ethernet PAUSE frames.
+ * - High water mark should allow for at least two standard size (1518)
+ * frames to be received after sending an XOFF.
+ * - Low water mark works best when it is very near the high water mark.
+ * This allows the receiver to restart by sending XON when it has
+ * drained a bit. Here we use an arbitary value of 1500 which will
+ * restart after one full frame is pulled from the buffer. There
+ * could be several smaller frames in the buffer and if so they will
+ * not trigger the XON until their total number reduces the buffer
+ * by 1500.
+ * - The pause time is fairly large at 1000 x 512ns = 512 usec.
+ */
+ rx_buf_size = igb_get_rx_buffer_size(hw);
+
+ hw->fc.high_water = rx_buf_size - (ETHER_MAX_LEN * 2);
+ hw->fc.low_water = hw->fc.high_water - 1500;
+ hw->fc.pause_time = IGB_FC_PAUSE_TIME;
+ hw->fc.send_xon = 1;
+
+ /* Set Flow control, use the tunable location if sane */
+ if ((igb_fc_setting != e1000_fc_none) && (igb_fc_setting < 4))
+ hw->fc.requested_mode = igb_fc_setting;
+ else
+ hw->fc.requested_mode = e1000_fc_none;
+
+ /* Issue a global reset */
+ e1000_reset_hw(hw);
+ E1000_WRITE_REG(hw, E1000_WUC, 0);
+
+ diag = e1000_init_hw(hw);
+ if (diag < 0)
+ return (diag);
+
+ E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
+ e1000_get_phy_info(hw);
+ e1000_check_for_link(hw);
+
+ return (0);
+}
+
+/* This function is based on igb_update_stats_counters() in igb/if_igb.c */
+static void
+eth_igb_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *rte_stats)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct e1000_hw_stats *stats =
+ E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
+ int pause_frames;
+
+ if(hw->phy.media_type == e1000_media_type_copper ||
+ (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
+ stats->symerrs +=
+ E1000_READ_REG(hw,E1000_SYMERRS);
+ stats->sec += E1000_READ_REG(hw, E1000_SEC);
+ }
+
+ stats->crcerrs += E1000_READ_REG(hw, E1000_CRCERRS);
+ stats->mpc += E1000_READ_REG(hw, E1000_MPC);
+ stats->scc += E1000_READ_REG(hw, E1000_SCC);
+ stats->ecol += E1000_READ_REG(hw, E1000_ECOL);
+
+ stats->mcc += E1000_READ_REG(hw, E1000_MCC);
+ stats->latecol += E1000_READ_REG(hw, E1000_LATECOL);
+ stats->colc += E1000_READ_REG(hw, E1000_COLC);
+ stats->dc += E1000_READ_REG(hw, E1000_DC);
+ stats->rlec += E1000_READ_REG(hw, E1000_RLEC);
+ stats->xonrxc += E1000_READ_REG(hw, E1000_XONRXC);
+ stats->xontxc += E1000_READ_REG(hw, E1000_XONTXC);
+ /*
+ ** For watchdog management we need to know if we have been
+ ** paused during the last interval, so capture that here.
+ */
+ pause_frames = E1000_READ_REG(hw, E1000_XOFFRXC);
+ stats->xoffrxc += pause_frames;
+ stats->xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC);
+ stats->fcruc += E1000_READ_REG(hw, E1000_FCRUC);
+ stats->prc64 += E1000_READ_REG(hw, E1000_PRC64);
+ stats->prc127 += E1000_READ_REG(hw, E1000_PRC127);
+ stats->prc255 += E1000_READ_REG(hw, E1000_PRC255);
+ stats->prc511 += E1000_READ_REG(hw, E1000_PRC511);
+ stats->prc1023 += E1000_READ_REG(hw, E1000_PRC1023);
+ stats->prc1522 += E1000_READ_REG(hw, E1000_PRC1522);
+ stats->gprc += E1000_READ_REG(hw, E1000_GPRC);
+ stats->bprc += E1000_READ_REG(hw, E1000_BPRC);
+ stats->mprc += E1000_READ_REG(hw, E1000_MPRC);
+ stats->gptc += E1000_READ_REG(hw, E1000_GPTC);
+
+ /* For the 64-bit byte counters the low dword must be read first. */
+ /* Both registers clear on the read of the high dword */
+
+ stats->gorc += E1000_READ_REG(hw, E1000_GORCL);
+ stats->gorc += ((uint64_t)E1000_READ_REG(hw, E1000_GORCH) << 32);
+ stats->gotc += E1000_READ_REG(hw, E1000_GOTCL);
+ stats->gotc += ((uint64_t)E1000_READ_REG(hw, E1000_GOTCH) << 32);
+
+ stats->rnbc += E1000_READ_REG(hw, E1000_RNBC);
+ stats->ruc += E1000_READ_REG(hw, E1000_RUC);
+ stats->rfc += E1000_READ_REG(hw, E1000_RFC);
+ stats->roc += E1000_READ_REG(hw, E1000_ROC);
+ stats->rjc += E1000_READ_REG(hw, E1000_RJC);
+
+ stats->tor += E1000_READ_REG(hw, E1000_TORH);
+ stats->tot += E1000_READ_REG(hw, E1000_TOTH);
+
+ stats->tpr += E1000_READ_REG(hw, E1000_TPR);
+ stats->tpt += E1000_READ_REG(hw, E1000_TPT);
+ stats->ptc64 += E1000_READ_REG(hw, E1000_PTC64);
+ stats->ptc127 += E1000_READ_REG(hw, E1000_PTC127);
+ stats->ptc255 += E1000_READ_REG(hw, E1000_PTC255);
+ stats->ptc511 += E1000_READ_REG(hw, E1000_PTC511);
+ stats->ptc1023 += E1000_READ_REG(hw, E1000_PTC1023);
+ stats->ptc1522 += E1000_READ_REG(hw, E1000_PTC1522);
+ stats->mptc += E1000_READ_REG(hw, E1000_MPTC);
+ stats->bptc += E1000_READ_REG(hw, E1000_BPTC);
+
+ /* Interrupt Counts */
+
+ stats->iac += E1000_READ_REG(hw, E1000_IAC);
+ stats->icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC);
+ stats->icrxatc += E1000_READ_REG(hw, E1000_ICRXATC);
+ stats->ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC);
+ stats->ictxatc += E1000_READ_REG(hw, E1000_ICTXATC);
+ stats->ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC);
+ stats->ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC);
+ stats->icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC);
+ stats->icrxoc += E1000_READ_REG(hw, E1000_ICRXOC);
+
+ /* Host to Card Statistics */
+
+ stats->cbtmpc += E1000_READ_REG(hw, E1000_CBTMPC);
+ stats->htdpmc += E1000_READ_REG(hw, E1000_HTDPMC);
+ stats->cbrdpc += E1000_READ_REG(hw, E1000_CBRDPC);
+ stats->cbrmpc += E1000_READ_REG(hw, E1000_CBRMPC);
+ stats->rpthc += E1000_READ_REG(hw, E1000_RPTHC);
+ stats->hgptc += E1000_READ_REG(hw, E1000_HGPTC);
+ stats->htcbdpc += E1000_READ_REG(hw, E1000_HTCBDPC);
+ stats->hgorc += E1000_READ_REG(hw, E1000_HGORCL);
+ stats->hgorc += ((uint64_t)E1000_READ_REG(hw, E1000_HGORCH) << 32);
+ stats->hgotc += E1000_READ_REG(hw, E1000_HGOTCL);
+ stats->hgotc += ((uint64_t)E1000_READ_REG(hw, E1000_HGOTCH) << 32);
+ stats->lenerrs += E1000_READ_REG(hw, E1000_LENERRS);
+ stats->scvpc += E1000_READ_REG(hw, E1000_SCVPC);
+ stats->hrmpc += E1000_READ_REG(hw, E1000_HRMPC);
+
+ stats->algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC);
+ stats->rxerrc += E1000_READ_REG(hw, E1000_RXERRC);
+ stats->tncrs += E1000_READ_REG(hw, E1000_TNCRS);
+ stats->cexterr += E1000_READ_REG(hw, E1000_CEXTERR);
+ stats->tsctc += E1000_READ_REG(hw, E1000_TSCTC);
+ stats->tsctfc += E1000_READ_REG(hw, E1000_TSCTFC);
+
+ if (rte_stats == NULL)
+ return;
+
+ /* Rx Errors */
+ rte_stats->ierrors = stats->rxerrc + stats->crcerrs + stats->algnerrc +
+ stats->ruc + stats->roc + stats->mpc + stats->cexterr;
+
+ /* Tx Errors */
+ rte_stats->oerrors = stats->ecol + stats->latecol;
+
+ rte_stats->ipackets = stats->gprc;
+ rte_stats->opackets = stats->gptc;
+ rte_stats->ibytes = stats->gorc;
+ rte_stats->obytes = stats->gotc;
+}
+
+static void
+eth_igb_stats_reset(struct rte_eth_dev *dev)
+{
+ struct e1000_hw_stats *hw_stats =
+ E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
+
+ /* HW registers are cleared on read */
+ eth_igb_stats_get(dev, NULL);
+
+ /* Reset software totals */
+ memset(hw_stats, 0, sizeof(*hw_stats));
+}
+
+static void
+eth_igb_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
+ dev_info->max_rx_pktlen = 0x3FFF; /* See RLPML register. */
+ dev_info->max_mac_addrs = hw->mac.rar_entry_count;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ dev_info->max_rx_queues = 4;
+ dev_info->max_tx_queues = 4;
+ break;
+
+ case e1000_82576:
+ dev_info->max_rx_queues = 16;
+ dev_info->max_tx_queues = 16;
+ break;
+
+ case e1000_82580:
+ dev_info->max_rx_queues = 8;
+ dev_info->max_tx_queues = 8;
+ break;
+
+ case e1000_i350:
+ dev_info->max_rx_queues = 8;
+ dev_info->max_tx_queues = 8;
+ break;
+
+ default:
+ /* Should not happen */
+ dev_info->max_rx_queues = 0;
+ dev_info->max_tx_queues = 0;
+ }
+}
+
+/* return 0 means link status changed, -1 means not changed */
+static int
+eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_eth_link link, old;
+ int link_check, count;
+
+ link_check = 0;
+ hw->mac.get_link_status = 1;
+
+ /* possible wait-to-complete in up to 9 seconds */
+ for (count = 0; count < IGB_LINK_UPDATE_CHECK_TIMEOUT; count ++) {
+ /* Read the real link status */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ /* Do the work to read phy */
+ e1000_check_for_link(hw);
+ link_check = !hw->mac.get_link_status;
+ break;
+
+ case e1000_media_type_fiber:
+ e1000_check_for_link(hw);
+ link_check = (E1000_READ_REG(hw, E1000_STATUS) &
+ E1000_STATUS_LU);
+ break;
+
+ case e1000_media_type_internal_serdes:
+ e1000_check_for_link(hw);
+ link_check = hw->mac.serdes_has_link;
+ break;
+
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+ if (link_check || wait_to_complete == 0)
+ break;
+ rte_delay_ms(IGB_LINK_UPDATE_CHECK_INTERVAL);
+ }
+ memset(&link, 0, sizeof(link));
+ rte_igb_dev_atomic_read_link_status(dev, &link);
+ old = link;
+
+ /* Now we check if a transition has happened */
+ if (link_check) {
+ hw->mac.ops.get_link_up_info(hw, &link.link_speed,
+ &link.link_duplex);
+ link.link_status = 1;
+ } else if (!link_check) {
+ link.link_speed = 0;
+ link.link_duplex = 0;
+ link.link_status = 0;
+ }
+ rte_igb_dev_atomic_write_link_status(dev, &link);
+
+ /* not changed */
+ if (old.link_status == link.link_status)
+ return -1;
+
+ /* changed */
+ return 0;
+}
+
+/*
+ * igb_hw_control_acquire sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means
+ * that the driver is loaded.
+ */
+static void
+igb_hw_control_acquire(struct e1000_hw *hw)
+{
+ uint32_t ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/*
+ * igb_hw_control_release resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ */
+static void
+igb_hw_control_release(struct e1000_hw *hw)
+{
+ uint32_t ctrl_ext;
+
+ /* Let firmware taken over control of h/w */
+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+ E1000_WRITE_REG(hw, E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/*
+ * Bit of a misnomer, what this really means is
+ * to enable OS management of the system... aka
+ * to disable special hardware management features.
+ */
+static void
+igb_init_manageability(struct e1000_hw *hw)
+{
+ if (e1000_enable_mng_pass_thru(hw)) {
+ uint32_t manc2h = E1000_READ_REG(hw, E1000_MANC2H);
+ uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ /* enable receiving management packets to the host */
+ manc |= E1000_MANC_EN_MNG2HOST;
+ manc2h |= 1 << 5; /* Mng Port 623 */
+ manc2h |= 1 << 6; /* Mng Port 664 */
+ E1000_WRITE_REG(hw, E1000_MANC2H, manc2h);
+ E1000_WRITE_REG(hw, E1000_MANC, manc);
+ }
+}
+
+static void
+igb_release_manageability(struct e1000_hw *hw)
+{
+ if (e1000_enable_mng_pass_thru(hw)) {
+ uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
+
+ manc |= E1000_MANC_ARP_EN;
+ manc &= ~E1000_MANC_EN_MNG2HOST;
+
+ E1000_WRITE_REG(hw, E1000_MANC, manc);
+ }
+}
+
+static void
+eth_igb_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t rctl;
+
+ rctl = E1000_READ_REG(hw, E1000_RCTL);
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+}
+
+static void
+eth_igb_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t rctl;
+
+ rctl = E1000_READ_REG(hw, E1000_RCTL);
+ rctl &= (~E1000_RCTL_UPE);
+ if (dev->data->all_multicast == 1)
+ rctl |= E1000_RCTL_MPE;
+ else
+ rctl &= (~E1000_RCTL_MPE);
+ E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+}
+
+static void
+eth_igb_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t rctl;
+
+ rctl = E1000_READ_REG(hw, E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+}
+
+static void
+eth_igb_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t rctl;
+
+ if (dev->data->promiscuous == 1)
+ return; /* must remain in all_multicast mode */
+ rctl = E1000_READ_REG(hw, E1000_RCTL);
+ rctl &= (~E1000_RCTL_MPE);
+ E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+}
+
+static void
+eth_igb_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct e1000_vfta * shadow_vfta =
+ E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
+ uint32_t vfta;
+ uint32_t vid_idx;
+ uint32_t vid_bit;
+
+ vid_idx = (uint32_t) ((vlan_id >> E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK);
+ vid_bit = (uint32_t) (1 << (vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK));
+ vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, vid_idx);
+ if (on)
+ vfta |= vid_bit;
+ else
+ vfta &= ~vid_bit;
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, vid_idx, vfta);
+
+ /* update local VFTA copy */
+ shadow_vfta->vfta[vid_idx] = vfta;
+}
+
+static void
+igb_vlan_hw_support_enable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct e1000_vfta * shadow_vfta =
+ E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
+ uint32_t reg;
+ int i;
+
+ /* VLAN Mode Enable */
+ reg = E1000_READ_REG(hw, E1000_CTRL);
+ reg |= E1000_CTRL_VME;
+ E1000_WRITE_REG(hw, E1000_CTRL, reg);
+
+ /* Filter Table Enable */
+ reg = E1000_READ_REG(hw, E1000_RCTL);
+ reg &= ~E1000_RCTL_CFIEN;
+ reg |= E1000_RCTL_VFE;
+ E1000_WRITE_REG(hw, E1000_RCTL, reg);
+
+ /* Update maximum frame size */
+ reg = E1000_READ_REG(hw, E1000_RLPML);
+ reg += VLAN_TAG_SIZE;
+ E1000_WRITE_REG(hw, E1000_RLPML, reg);
+
+ /* restore VFTA table */
+ for (i = 0; i < E1000_VFTA_SIZE; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, i, shadow_vfta->vfta[i]);
+}
+
+static void
+igb_vlan_hw_support_disable(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t reg;
+
+ /* VLAN Mode disable */
+ reg = E1000_READ_REG(hw, E1000_CTRL);
+ reg &= ~E1000_CTRL_VME;
+ E1000_WRITE_REG(hw, E1000_CTRL, reg);
+}
+
+static void
+igb_intr_disable(struct e1000_hw *hw)
+{
+ E1000_WRITE_REG(hw, E1000_IMC, ~0);
+ E1000_WRITE_FLUSH(hw);
+}
+
+/**
+ * It enables the interrupt mask and then enable the interrupt.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+eth_igb_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ E1000_WRITE_REG(hw, E1000_IMS, E1000_ICR_LSC);
+ E1000_WRITE_FLUSH(hw);
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+
+ return 0;
+}
+
+/*
+ * It reads ICR and gets interrupt causes, check it and set a bit flag
+ * to update link status.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+eth_igb_interrupt_get_status(struct rte_eth_dev *dev)
+{
+ uint32_t icr;
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct e1000_interrupt *intr =
+ E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+
+ /* read-on-clear nic registers here */
+ icr = E1000_READ_REG(hw, E1000_ICR);
+ if (icr & E1000_ICR_LSC) {
+ intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
+ }
+
+ return 0;
+}
+
+/*
+ * It executes link_update after knowing an interrupt is prsent.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+eth_igb_interrupt_action(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw =
+ E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct e1000_interrupt *intr =
+ E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+ uint32_t tctl, rctl;
+ struct rte_eth_link link;
+ int ret;
+
+ if (!(intr->flags & E1000_FLAG_NEED_LINK_UPDATE))
+ return -1;
+
+ intr->flags &= ~E1000_FLAG_NEED_LINK_UPDATE;
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+
+ /* set get_link_status to check register later */
+ hw->mac.get_link_status = 1;
+ ret = eth_igb_link_update(dev, 0);
+
+ /* check if link has changed */
+ if (ret < 0)
+ return 0;
+
+ memset(&link, 0, sizeof(link));
+ rte_igb_dev_atomic_read_link_status(dev, &link);
+ if (link.link_status) {
+ PMD_INIT_LOG(INFO,
+ " Port %d: Link Up - speed %u Mbps - %s\n",
+ dev->data->port_id, (unsigned)link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX ?
+ "full-duplex" : "half-duplex");
+ } else {
+ PMD_INIT_LOG(INFO, " Port %d: Link Down\n",
+ dev->data->port_id);
+ }
+ PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
+ dev->pci_dev->addr.domain,
+ dev->pci_dev->addr.bus,
+ dev->pci_dev->addr.devid,
+ dev->pci_dev->addr.function);
+ tctl = E1000_READ_REG(hw, E1000_TCTL);
+ rctl = E1000_READ_REG(hw, E1000_RCTL);
+ if (link.link_status) {
+ /* enable Tx/Rx */
+ tctl |= E1000_TCTL_EN;
+ rctl |= E1000_RCTL_EN;
+ } else {
+ /* disable Tx/Rx */
+ tctl &= ~E1000_TCTL_EN;
+ rctl &= ~E1000_RCTL_EN;
+ }
+ E1000_WRITE_REG(hw, E1000_TCTL, tctl);
+ E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+ E1000_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * Interrupt handler which shall be registered at first.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+eth_igb_interrupt_handler(struct rte_intr_handle *handle, void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+
+ eth_igb_interrupt_get_status(dev);
+ eth_igb_interrupt_action(dev);
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
+}
+
+static int
+eth_igb_led_on(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw;
+
+ hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ return (e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
+}
+
+static int
+eth_igb_led_off(struct rte_eth_dev *dev)
+{
+ struct e1000_hw *hw;
+
+ hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ return (e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
+}
+
+static int
+eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct e1000_hw *hw;
+ int err;
+ enum e1000_fc_mode rte_fcmode_2_e1000_fcmode[] = {
+ e1000_fc_none,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full
+ };
+ uint32_t rx_buf_size;
+ uint32_t max_high_water;
+
+ hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ rx_buf_size = igb_get_rx_buffer_size(hw);
+ PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
+
+ /* At least reserve one Ethernet frame for watermark */
+ max_high_water = rx_buf_size - ETHER_MAX_LEN;
+ if ((fc_conf->high_water > max_high_water) ||
+ (fc_conf->high_water < fc_conf->low_water)) {
+ PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value \n");
+ PMD_INIT_LOG(ERR, "high water must <= 0x%x \n", max_high_water);
+ return (-EINVAL);
+ }
+
+ hw->fc.requested_mode = rte_fcmode_2_e1000_fcmode[fc_conf->mode];
+ hw->fc.pause_time = fc_conf->pause_time;
+ hw->fc.high_water = fc_conf->high_water;
+ hw->fc.low_water = fc_conf->low_water;
+ hw->fc.send_xon = fc_conf->send_xon;
+
+ err = e1000_setup_link_generic(hw);
+ if (err == E1000_SUCCESS) {
+ return 0;
+ }
+
+ PMD_INIT_LOG(ERR, "e1000_setup_link_generic = 0x%x \n", err);
+ return (-EIO);
+}
+
+static void
+eth_igb_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, __rte_unused uint32_t pool)
+{
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ e1000_rar_set(hw, mac_addr->addr_bytes, index);
+}
+
+static void
+eth_igb_rar_clear(struct rte_eth_dev *dev, uint32_t index)
+{
+ uint8_t addr[ETHER_ADDR_LEN];
+ struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ memset(addr, 0, sizeof(addr));
+
+ e1000_rar_set(hw, addr, index);
+}