summaryrefslogtreecommitdiff
path: root/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c')
-rw-r--r--kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c1142
1 files changed, 0 insertions, 1142 deletions
diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
deleted file mode 100644
index 1be4c64..0000000
--- a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
+++ /dev/null
@@ -1,1142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2012 Intel Corporation.
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "ixgbe_api.h"
-#include "ixgbe_common.h"
-
-/**
- * ixgbe_init_shared_code - Initialize the shared code
- * @hw: pointer to hardware structure
- *
- * This will assign function pointers and assign the MAC type and PHY code.
- * Does not touch the hardware. This function must be called prior to any
- * other function in the shared code. The ixgbe_hw structure should be
- * memset to 0 prior to calling this function. The following fields in
- * hw structure should be filled in prior to calling this function:
- * hw_addr, back, device_id, vendor_id, subsystem_device_id,
- * subsystem_vendor_id, and revision_id
- **/
-s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
-{
- s32 status;
-
- /*
- * Set the mac type
- */
- ixgbe_set_mac_type(hw);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- status = ixgbe_init_ops_82598(hw);
- break;
- case ixgbe_mac_82599EB:
- status = ixgbe_init_ops_82599(hw);
- break;
- case ixgbe_mac_X540:
- status = ixgbe_init_ops_X540(hw);
- break;
- default:
- status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
- break;
- }
-
- return status;
-}
-
-/**
- * ixgbe_set_mac_type - Sets MAC type
- * @hw: pointer to the HW structure
- *
- * This function sets the mac type of the adapter based on the
- * vendor ID and device ID stored in the hw structure.
- **/
-s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
-{
- s32 ret_val = 0;
-
- if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) {
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598:
- case IXGBE_DEV_ID_82598_BX:
- case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
- case IXGBE_DEV_ID_82598AF_DUAL_PORT:
- case IXGBE_DEV_ID_82598AT:
- case IXGBE_DEV_ID_82598AT2:
- case IXGBE_DEV_ID_82598EB_CX4:
- case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
- case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
- case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
- case IXGBE_DEV_ID_82598EB_XF_LR:
- case IXGBE_DEV_ID_82598EB_SFP_LOM:
- hw->mac.type = ixgbe_mac_82598EB;
- break;
- case IXGBE_DEV_ID_82599_KX4:
- case IXGBE_DEV_ID_82599_KX4_MEZZ:
- case IXGBE_DEV_ID_82599_XAUI_LOM:
- case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
- case IXGBE_DEV_ID_82599_KR:
- case IXGBE_DEV_ID_82599_SFP:
- case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
- case IXGBE_DEV_ID_82599_SFP_FCOE:
- case IXGBE_DEV_ID_82599_SFP_EM:
- case IXGBE_DEV_ID_82599_SFP_SF2:
- case IXGBE_DEV_ID_82599_QSFP_SF_QP:
- case IXGBE_DEV_ID_82599EN_SFP:
- case IXGBE_DEV_ID_82599_CX4:
- case IXGBE_DEV_ID_82599_LS:
- case IXGBE_DEV_ID_82599_T3_LOM:
- hw->mac.type = ixgbe_mac_82599EB;
- break;
- case IXGBE_DEV_ID_X540T:
- hw->mac.type = ixgbe_mac_X540;
- break;
- default:
- ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
- break;
- }
- } else {
- ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
- }
-
- hw_dbg(hw, "ixgbe_set_mac_type found mac: %d, returns: %d\n",
- hw->mac.type, ret_val);
- return ret_val;
-}
-
-/**
- * ixgbe_init_hw - Initialize the hardware
- * @hw: pointer to hardware structure
- *
- * Initialize the hardware by resetting and then starting the hardware
- **/
-s32 ixgbe_init_hw(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_reset_hw - Performs a hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by resetting the transmit and receive units, masks and
- * clears all interrupts, performs a PHY reset, and performs a MAC reset
- **/
-s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_start_hw - Prepares hardware for Rx/Tx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware by filling the bus info structure and media type,
- * clears all on chip counters, initializes receive address registers,
- * multicast table, VLAN filter table, calls routine to setup link and
- * flow control settings, and leaves transmit and receive units disabled
- * and uninitialized.
- **/
-s32 ixgbe_start_hw(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_clear_hw_cntrs - Clear hardware counters
- * @hw: pointer to hardware structure
- *
- * Clears all hardware statistics counters by reading them from the hardware
- * Statistics counters are clear on read.
- **/
-s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_media_type - Get media type
- * @hw: pointer to hardware structure
- *
- * Returns the media type (fiber, copper, backplane)
- **/
-enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
- ixgbe_media_type_unknown);
-}
-
-/**
- * ixgbe_get_mac_addr - Get MAC address
- * @hw: pointer to hardware structure
- * @mac_addr: Adapter MAC address
- *
- * Reads the adapter's MAC address from the first Receive Address Register
- * (RAR0) A reset of the adapter must have been performed prior to calling
- * this function in order for the MAC address to have been loaded from the
- * EEPROM into RAR0
- **/
-s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
- (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_san_mac_addr - Get SAN MAC address
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
- *
- * Reads the SAN MAC address from the EEPROM, if it's available. This is
- * per-port, so set_lan_id() must be called before reading the addresses.
- **/
-s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
- (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_san_mac_addr - Write a SAN MAC address
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
- *
- * Writes A SAN MAC address to the EEPROM.
- **/
-s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
- (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_device_caps - Get additional device capabilities
- * @hw: pointer to hardware structure
- * @device_caps: the EEPROM word for device capabilities
- *
- * Reads the extra device capabilities from the EEPROM
- **/
-s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
- (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
- * @hw: pointer to hardware structure
- * @wwnn_prefix: the alternative WWNN prefix
- * @wwpn_prefix: the alternative WWPN prefix
- *
- * This function will read the EEPROM from the alternative SAN MAC address
- * block to check the support for the alternative WWNN/WWPN prefix support.
- **/
-s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
- u16 *wwpn_prefix)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
- (hw, wwnn_prefix, wwpn_prefix),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
- * @hw: pointer to hardware structure
- * @bs: the fcoe boot status
- *
- * This function will read the FCOE boot status from the iSCSI FCOE block
- **/
-s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
- (hw, bs),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_bus_info - Set PCI bus info
- * @hw: pointer to hardware structure
- *
- * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
- **/
-s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_num_of_tx_queues - Get Tx queues
- * @hw: pointer to hardware structure
- *
- * Returns the number of transmit queues for the given adapter.
- **/
-u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
-{
- return hw->mac.max_tx_queues;
-}
-
-/**
- * ixgbe_get_num_of_rx_queues - Get Rx queues
- * @hw: pointer to hardware structure
- *
- * Returns the number of receive queues for the given adapter.
- **/
-u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
-{
- return hw->mac.max_rx_queues;
-}
-
-/**
- * ixgbe_stop_adapter - Disable Rx/Tx units
- * @hw: pointer to hardware structure
- *
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
- **/
-s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_read_pba_string - Reads part number string from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number string from the EEPROM
- * @pba_num_size: part number string buffer length
- *
- * Reads the part number string from the EEPROM.
- **/
-s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
-{
- return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
-}
-
-/**
- * ixgbe_identify_phy - Get PHY type
- * @hw: pointer to hardware structure
- *
- * Determines the physical layer module found on the current adapter.
- **/
-s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
-{
- s32 status = 0;
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
- IXGBE_NOT_IMPLEMENTED);
- }
-
- return status;
-}
-
-/**
- * ixgbe_reset_phy - Perform a PHY reset
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
-{
- s32 status = 0;
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- if (ixgbe_identify_phy(hw) != 0)
- status = IXGBE_ERR_PHY;
- }
-
- if (status == 0) {
- status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
- IXGBE_NOT_IMPLEMENTED);
- }
- return status;
-}
-
-/**
- * ixgbe_get_phy_firmware_version -
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to firmware version
- **/
-s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
-{
- s32 status = 0;
-
- status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
- (hw, firmware_version),
- IXGBE_NOT_IMPLEMENTED);
- return status;
-}
-
-/**
- * ixgbe_read_phy_reg - Read PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
- *
- * Reads a value from a specified PHY register
- **/
-s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
- u16 *phy_data)
-{
- if (hw->phy.id == 0)
- ixgbe_identify_phy(hw);
-
- return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
- device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_write_phy_reg - Write PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @phy_data: Data to write to the PHY register
- *
- * Writes a value to specified PHY register
- **/
-s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
- u16 phy_data)
-{
- if (hw->phy.id == 0)
- ixgbe_identify_phy(hw);
-
- return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
- device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_setup_phy_link - Restart PHY autoneg
- * @hw: pointer to hardware structure
- *
- * Restart autonegotiation and PHY and waits for completion.
- **/
-s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_check_phy_link - Determine link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads a PHY register to determine if link is up and the current speed for
- * the PHY.
- **/
-s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up)
-{
- return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
- link_up), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_setup_phy_link_speed - Set auto advertise
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- *
- * Sets the auto advertised capabilities
- **/
-s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
- autoneg, autoneg_wait_to_complete),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_check_link - Get link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete)
-{
- return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
- link_up, link_up_wait_to_complete),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_disable_tx_laser - Disable Tx laser
- * @hw: pointer to hardware structure
- *
- * If the driver needs to disable the laser on SFI optics.
- **/
-void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
-{
- if (hw->mac.ops.disable_tx_laser)
- hw->mac.ops.disable_tx_laser(hw);
-}
-
-/**
- * ixgbe_enable_tx_laser - Enable Tx laser
- * @hw: pointer to hardware structure
- *
- * If the driver needs to enable the laser on SFI optics.
- **/
-void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
-{
- if (hw->mac.ops.enable_tx_laser)
- hw->mac.ops.enable_tx_laser(hw);
-}
-
-/**
- * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
- * @hw: pointer to hardware structure
- *
- * When the driver changes the link speeds that it can support then
- * flap the tx laser to alert the link partner to start autotry
- * process on its end.
- **/
-void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
-{
- if (hw->mac.ops.flap_tx_laser)
- hw->mac.ops.flap_tx_laser(hw);
-}
-
-/**
- * ixgbe_setup_link - Set link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- *
- * Configures link settings. Restarts the link.
- * Performs autonegotiation if needed.
- **/
-s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
- autoneg, autoneg_wait_to_complete),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_link_capabilities - Returns link capabilities
- * @hw: pointer to hardware structure
- *
- * Determines the link capabilities of the current configuration.
- **/
-s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *autoneg)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
- speed, autoneg), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_led_on - Turn on LEDs
- * @hw: pointer to hardware structure
- * @index: led number to turn on
- *
- * Turns on the software controllable LEDs.
- **/
-s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
-{
- return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_led_off - Turn off LEDs
- * @hw: pointer to hardware structure
- * @index: led number to turn off
- *
- * Turns off the software controllable LEDs.
- **/
-s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
-{
- return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_blink_led_start - Blink LEDs
- * @hw: pointer to hardware structure
- * @index: led number to blink
- *
- * Blink LED based on index.
- **/
-s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
-{
- return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_blink_led_stop - Stop blinking LEDs
- * @hw: pointer to hardware structure
- *
- * Stop blinking LED based on index.
- **/
-s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
-{
- return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_init_eeprom_params - Initialize EEPROM parameters
- * @hw: pointer to hardware structure
- *
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
- **/
-s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-
-/**
- * ixgbe_write_eeprom - Write word to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
- *
- * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
- * called after this function, the EEPROM will most likely contain an
- * invalid checksum.
- **/
-s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word(s) to be written to the EEPROM
- * @words: number of words
- *
- * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
- * called after this function, the EEPROM will most likely contain an
- * invalid checksum.
- **/
-s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
- (hw, offset, words, data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_read_eeprom - Read word from EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
- *
- * Reads 16 bit value from EEPROM
- **/
-s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit word(s) from EEPROM
- * @words: number of words
- *
- * Reads 16 bit word(s) from EEPROM
- **/
-s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
- (hw, offset, words, data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
- *
- * Performs checksum calculation and validates the EEPROM checksum
- **/
-s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
- (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_insert_mac_addr - Find a RAR for this mac address
- * @hw: pointer to hardware structure
- * @addr: Address to put into receive address register
- * @vmdq: VMDq pool to assign
- *
- * Puts an ethernet address into a receive address register, or
- * finds the rar that it is already in; adds to the pool list
- **/
-s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
-{
- return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
- (hw, addr, vmdq),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_rar - Set Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: VMDq "set"
- * @enable_addr: set flag that address is active
- *
- * Puts an ethernet address into a receive address register.
- **/
-s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
- u32 enable_addr)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
- enable_addr), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_clear_rar - Clear Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- *
- * Puts an ethernet address into a receive address register.
- **/
-s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
-{
- return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_vmdq - Associate a VMDq index with a receive address
- * @hw: pointer to hardware structure
- * @rar: receive address register index to associate with VMDq index
- * @vmdq: VMDq set or pool index
- **/
-s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
- IXGBE_NOT_IMPLEMENTED);
-
-}
-
-/**
- * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
- * @hw: pointer to hardware structure
- * @vmdq: VMDq default pool index
- **/
-s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
- (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
- * @hw: pointer to hardware structure
- * @rar: receive address register index to disassociate with VMDq index
- * @vmdq: VMDq set or pool index
- **/
-s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_init_rx_addrs - Initializes receive address filters.
- * @hw: pointer to hardware structure
- *
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- **/
-s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
- * @hw: pointer to hardware structure
- **/
-u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
-{
- return hw->mac.num_rar_entries;
-}
-
-/**
- * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
- * @hw: pointer to hardware structure
- * @addr_list: the list of new multicast addresses
- * @addr_count: number of addresses
- * @func: iterator function to walk the multicast address list
- *
- * The given list replaces any existing list. Clears the secondary addrs from
- * receive address registers. Uses unused receive address registers for the
- * first secondary addresses, and falls back to promiscuous mode as needed.
- **/
-s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
- u32 addr_count, ixgbe_mc_addr_itr func)
-{
- return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
- addr_list, addr_count, func),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
- * @hw: pointer to hardware structure
- * @mc_addr_list: the list of new multicast addresses
- * @mc_addr_count: number of addresses
- * @func: iterator function to walk the multicast address list
- *
- * The given list replaces any existing list. Clears the MC addrs from receive
- * address registers and the multicast table. Uses unused receive address
- * registers for the first multicast addresses, and hashes the rest into the
- * multicast table.
- **/
-s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, ixgbe_mc_addr_itr func,
- bool clear)
-{
- return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
- mc_addr_list, mc_addr_count, func, clear),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_enable_mc - Enable multicast address in RAR
- * @hw: pointer to hardware structure
- *
- * Enables multicast address in RAR and the use of the multicast hash table.
- **/
-s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_disable_mc - Disable multicast address in RAR
- * @hw: pointer to hardware structure
- *
- * Disables multicast address in RAR and the use of the multicast hash table.
- **/
-s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_clear_vfta - Clear VLAN filter table
- * @hw: pointer to hardware structure
- *
- * Clears the VLAN filer table, and the VMDq index associated with the filter
- **/
-s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_vfta - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
- *
- * Turn on/off specified VLAN in the VLAN filter table.
- **/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
- vlan_on), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_vlvf - Set VLAN Pool Filter
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- * @vfta_changed: pointer to boolean flag which indicates whether VFTA
- * should be changed
- *
- * Turn on/off specified bit in VLVF table.
- **/
-s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
- bool *vfta_changed)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
- vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_fc_enable - Enable flow control
- * @hw: pointer to hardware structure
- *
- * Configures the flow control settings based on SW configuration.
- **/
-s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
- * @hw: pointer to hardware structure
- * @maj: driver major number to be sent to firmware
- * @min: driver minor number to be sent to firmware
- * @build: driver build number to be sent to firmware
- * @ver: driver version number to be sent to firmware
- **/
-s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
- u8 ver)
-{
- return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
- build, ver), IXGBE_NOT_IMPLEMENTED);
-}
-
-
-/**
- * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
- * @hw: pointer to hardware structure
- *
- * Updates the temperatures in mac.thermal_sensor_data
- **/
-s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
- * @hw: pointer to hardware structure
- *
- * Inits the thermal sensor thresholds according to the NVM map
- **/
-s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-/**
- * ixgbe_read_analog_reg8 - Reads 8 bit analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
- *
- * Performs write operation to analog register specified.
- **/
-s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
- return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
- val), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_write_analog_reg8 - Writes 8 bit analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to write
- * @val: value to write
- *
- * Performs write operation to Atlas analog register specified.
- **/
-s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
- return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
- val), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
- * @hw: pointer to hardware structure
- *
- * Initializes the Unicast Table Arrays to zero on device load. This
- * is part of the Rx init addr execution path.
- **/
-s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @data: value read
- *
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
- **/
-s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
- u8 *data)
-{
- return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
- dev_addr, data), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @data: value to write
- *
- * Performs byte write operation to SFP module's EEPROM over I2C interface
- * at a specified device address.
- **/
-s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
- u8 data)
-{
- return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
- dev_addr, data), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to write
- * @eeprom_data: value to write
- *
- * Performs byte write operation to SFP module's EEPROM over I2C interface.
- **/
-s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
- u8 byte_offset, u8 eeprom_data)
-{
- return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
- (hw, byte_offset, eeprom_data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
- *
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
- **/
-s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
-{
- return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
- (hw, byte_offset, eeprom_data),
- IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_get_supported_physical_layer - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
- (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
-}
-
-/**
- * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
- * @hw: pointer to hardware structure
- * @regval: bitfield to write to the Rx DMA register
- *
- * Enables the Rx DMA unit of the device.
- **/
-s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
-{
- return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
- (hw, regval), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_disable_sec_rx_path - Stops the receive data path
- * @hw: pointer to hardware structure
- *
- * Stops the receive data path.
- **/
-s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
- (hw), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_enable_sec_rx_path - Enables the receive data path
- * @hw: pointer to hardware structure
- *
- * Enables the receive data path.
- **/
-s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
-{
- return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
- (hw), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
- *
- * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
- **/
-s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask)
-{
- return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
- (hw, mask), IXGBE_NOT_IMPLEMENTED);
-}
-
-/**
- * ixgbe_release_swfw_semaphore - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
- *
- * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
- **/
-void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask)
-{
- if (hw->mac.ops.release_swfw_sync)
- hw->mac.ops.release_swfw_sync(hw, mask);
-}