summaryrefslogtreecommitdiff
path: root/doc/guides/prog_guide/rte_security.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/prog_guide/rte_security.rst')
-rw-r--r--doc/guides/prog_guide/rte_security.rst20
1 files changed, 10 insertions, 10 deletions
diff --git a/doc/guides/prog_guide/rte_security.rst b/doc/guides/prog_guide/rte_security.rst
index cb70caa..7d0734a 100644
--- a/doc/guides/prog_guide/rte_security.rst
+++ b/doc/guides/prog_guide/rte_security.rst
@@ -40,7 +40,7 @@ Inline Crypto
~~~~~~~~~~~~~
RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO:
-The crypto processing for security protocol (e.g. IPSec) is processed
+The crypto processing for security protocol (e.g. IPsec) is processed
inline during receive and transmission on NIC port. The flow based
security action should be configured on the port.
@@ -48,7 +48,7 @@ Ingress Data path - The packet is decrypted in RX path and relevant
crypto status is set in Rx descriptors. After the successful inline
crypto processing the packet is presented to host as a regular Rx packet
however all security protocol related headers are still attached to the
-packet. e.g. In case of IPSec, the IPSec tunnel headers (if any),
+packet. e.g. In case of IPsec, the IPsec tunnel headers (if any),
ESP/AH headers will remain in the packet but the received packet
contains the decrypted data where the encrypted data was when the packet
arrived. The driver Rx path check the descriptors and and based on the
@@ -111,7 +111,7 @@ Inline protocol offload
~~~~~~~~~~~~~~~~~~~~~~~
RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL:
-The crypto and protocol processing for security protocol (e.g. IPSec)
+The crypto and protocol processing for security protocol (e.g. IPsec)
is processed inline during receive and transmission. The flow based
security action should be configured on the port.
@@ -119,7 +119,7 @@ Ingress Data path - The packet is decrypted in the RX path and relevant
crypto status is set in the Rx descriptors. After the successful inline
crypto processing the packet is presented to the host as a regular Rx packet
but all security protocol related headers are optionally removed from the
-packet. e.g. in the case of IPSec, the IPSec tunnel headers (if any),
+packet. e.g. in the case of IPsec, the IPsec tunnel headers (if any),
ESP/AH headers will be removed from the packet and the received packet
will contains the decrypted packet only. The driver Rx path checks the
descriptors and based on the crypto status sets additional flags in
@@ -132,7 +132,7 @@ to identify the security processing done on the packet.
The underlying device in this case is stateful. It is expected that
the device shall support crypto processing for all kind of packets matching
to a given flow, this includes fragmented packets (post reassembly).
- E.g. in case of IPSec the device may internally manage anti-replay etc.
+ E.g. in case of IPsec the device may internally manage anti-replay etc.
It will provide a configuration option for anti-replay behavior i.e. to drop
the packets or pass them to driver with error flags set in the descriptor.
@@ -150,7 +150,7 @@ to cross the MTU size.
.. note::
The underlying device will manage state information required for egress
- processing. E.g. in case of IPSec, the seq number will be added to the
+ processing. E.g. in case of IPsec, the seq number will be added to the
packet, however the device shall provide indication when the sequence number
is about to overflow. The underlying device may support post encryption TSO.
@@ -199,13 +199,13 @@ crypto device.
Decryption: The packet is sent to the crypto device for security
protocol processing. The device will decrypt the packet and it will also
optionally remove additional security headers from the packet.
-E.g. in case of IPSec, IPSec tunnel headers (if any), ESP/AH headers
+E.g. in case of IPsec, IPsec tunnel headers (if any), ESP/AH headers
will be removed from the packet and the decrypted packet may contain
plain data only.
.. note::
- In case of IPSec the device may internally manage anti-replay etc.
+ In case of IPsec the device may internally manage anti-replay etc.
It will provide a configuration option for anti-replay behavior i.e. to drop
the packets or pass them to driver with error flags set in descriptor.
@@ -217,7 +217,7 @@ for any protocol header addition.
.. note::
- In the case of IPSec, the seq number will be added to the packet,
+ In the case of IPsec, the seq number will be added to the packet,
It shall provide an indication when the sequence number is about to
overflow.
@@ -549,7 +549,7 @@ IPsec related configuration parameters are defined in ``rte_security_ipsec_xform
struct rte_security_ipsec_sa_options options;
/**< various SA options */
enum rte_security_ipsec_sa_direction direction;
- /**< IPSec SA Direction - Egress/Ingress */
+ /**< IPsec SA Direction - Egress/Ingress */
enum rte_security_ipsec_sa_protocol proto;
/**< IPsec SA Protocol - AH/ESP */
enum rte_security_ipsec_sa_mode mode;