summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorViacheslav Ovsiienko <viacheslavo@mellanox.com>2018-11-03 06:18:39 +0000
committerFerruh Yigit <ferruh.yigit@intel.com>2018-11-05 15:01:25 +0100
commit2a3fed2042238b9cb813c276bb13ce76f509cf54 (patch)
tree9112fcefaa2604f1392464e6ffbc09b52eeab6ad /drivers
parent0decab8ed1df1d92fdfa281b1bc71be0740520d0 (diff)
downloaddpdk-2a3fed2042238b9cb813c276bb13ce76f509cf54.zip
dpdk-2a3fed2042238b9cb813c276bb13ce76f509cf54.tar.gz
dpdk-2a3fed2042238b9cb813c276bb13ce76f509cf54.tar.xz
net/mlx5: add E-Switch VXLAN to validation routine
This patch adds VXLAN support for flow item/action lists validation. The following entities are now supported: - RTE_FLOW_ITEM_TYPE_VXLAN, contains the tunnel VNI - RTE_FLOW_ACTION_TYPE_VXLAN_DECAP, if this action is specified the items in the flow items list treated as outer network parameters for tunnel outer header match. The ethernet layer addresses always are treated as inner ones. - RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP, contains the item list to build the encapsulation header. In current implementation the values is the subject for some constraints: - outer source MAC address will be always unconditionally set to the one of MAC addresses of outer egress interface - no way to specify source UDP port - all abovementioned parameters are ignored if specified in the rule, warning messages are sent to the log Minimal tunneling support is also added. If VXLAN decapsulation action is specified the ETH item can follow the VXLAN VNI item, the content of this ETH item is treated as inner MAC addresses and type. The outer ETH item for VXLAN decapsulation action is always ignored. Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com> Acked-by: Yongseok Koh <yskoh@mellanox.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/mlx5/mlx5_flow_tcf.c773
1 files changed, 771 insertions, 2 deletions
diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index 93a13fc..6299069 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -1116,6 +1116,665 @@ flow_tcf_validate_attributes(const struct rte_flow_attr *attr,
}
/**
+ * Validate VXLAN_ENCAP action RTE_FLOW_ITEM_TYPE_ETH item for E-Switch.
+ * The routine checks the L2 fields to be used in encapsulation header.
+ *
+ * @param[in] item
+ * Pointer to the item structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap_eth(const struct rte_flow_item *item,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *spec = item->spec;
+ const struct rte_flow_item_eth *mask = item->mask;
+
+ if (!spec) {
+ /*
+ * Specification for L2 addresses can be empty
+ * because these ones are optional and not
+ * required directly by tc rule. Kernel tries
+ * to resolve these ones on its own
+ */
+ return 0;
+ }
+ if (!mask) {
+ /* If mask is not specified use the default one. */
+ mask = &rte_flow_item_eth_mask;
+ }
+ if (memcmp(&mask->dst,
+ &flow_tcf_mask_empty.eth.dst,
+ sizeof(flow_tcf_mask_empty.eth.dst))) {
+ if (memcmp(&mask->dst,
+ &rte_flow_item_eth_mask.dst,
+ sizeof(rte_flow_item_eth_mask.dst)))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"eth.dst\" field");
+ }
+ if (memcmp(&mask->src,
+ &flow_tcf_mask_empty.eth.src,
+ sizeof(flow_tcf_mask_empty.eth.src))) {
+ if (memcmp(&mask->src,
+ &rte_flow_item_eth_mask.src,
+ sizeof(rte_flow_item_eth_mask.src)))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"eth.src\" field");
+ }
+ if (mask->type != RTE_BE16(0x0000)) {
+ if (mask->type != RTE_BE16(0xffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"eth.type\" field");
+ DRV_LOG(WARNING,
+ "outer ethernet type field"
+ " cannot be forced for vxlan"
+ " encapsulation, parameter ignored");
+ }
+ return 0;
+}
+
+/**
+ * Validate VXLAN_ENCAP action RTE_FLOW_ITEM_TYPE_IPV4 item for E-Switch.
+ * The routine checks the IPv4 fields to be used in encapsulation header.
+ *
+ * @param[in] item
+ * Pointer to the item structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap_ipv4(const struct rte_flow_item *item,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *spec = item->spec;
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+
+ if (!spec) {
+ /*
+ * Specification for IP addresses cannot be empty
+ * because it is required by tunnel_key parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "NULL outer ipv4 address"
+ " specification for vxlan"
+ " encapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ if (mask->hdr.dst_addr != RTE_BE32(0x00000000)) {
+ if (mask->hdr.dst_addr != RTE_BE32(0xffffffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv4.hdr.dst_addr\" field"
+ " for vxlan encapsulation");
+ /* More IPv4 address validations can be put here. */
+ } else {
+ /*
+ * Kernel uses the destination IP address to determine
+ * the routing path and obtain the MAC destination
+ * address, so IP destination address must be
+ * specified in the tc rule.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer ipv4 destination address"
+ " must be specified for"
+ " vxlan encapsulation");
+ }
+ if (mask->hdr.src_addr != RTE_BE32(0x00000000)) {
+ if (mask->hdr.src_addr != RTE_BE32(0xffffffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv4.hdr.src_addr\" field"
+ " for vxlan encapsulation");
+ /* More IPv4 address validations can be put here. */
+ } else {
+ /*
+ * Kernel uses the source IP address to select the
+ * interface for egress encapsulated traffic, so
+ * it must be specified in the tc rule.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer ipv4 source address"
+ " must be specified for"
+ " vxlan encapsulation");
+ }
+ return 0;
+}
+
+/**
+ * Validate VXLAN_ENCAP action RTE_FLOW_ITEM_TYPE_IPV6 item for E-Switch.
+ * The routine checks the IPv6 fields to be used in encapsulation header.
+ *
+ * @param[in] item
+ * Pointer to the item structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap_ipv6(const struct rte_flow_item *item,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *spec = item->spec;
+ const struct rte_flow_item_ipv6 *mask = item->mask;
+
+ if (!spec) {
+ /*
+ * Specification for IP addresses cannot be empty
+ * because it is required by tunnel_key parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "NULL outer ipv6 address"
+ " specification for"
+ " vxlan encapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ if (memcmp(&mask->hdr.dst_addr,
+ &flow_tcf_mask_empty.ipv6.hdr.dst_addr,
+ IPV6_ADDR_LEN)) {
+ if (memcmp(&mask->hdr.dst_addr,
+ &rte_flow_item_ipv6_mask.hdr.dst_addr,
+ IPV6_ADDR_LEN))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv6.hdr.dst_addr\" field"
+ " for vxlan encapsulation");
+ /* More IPv6 address validations can be put here. */
+ } else {
+ /*
+ * Kernel uses the destination IP address to determine
+ * the routing path and obtain the MAC destination
+ * address (heigh or gate), so IP destination address
+ * must be specified within the tc rule.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer ipv6 destination address"
+ " must be specified for"
+ " vxlan encapsulation");
+ }
+ if (memcmp(&mask->hdr.src_addr,
+ &flow_tcf_mask_empty.ipv6.hdr.src_addr,
+ IPV6_ADDR_LEN)) {
+ if (memcmp(&mask->hdr.src_addr,
+ &rte_flow_item_ipv6_mask.hdr.src_addr,
+ IPV6_ADDR_LEN))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv6.hdr.src_addr\" field"
+ " for vxlan encapsulation");
+ /* More L3 address validation can be put here. */
+ } else {
+ /*
+ * Kernel uses the source IP address to select the
+ * interface for egress encapsulated traffic, so
+ * it must be specified in the tc rule.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer L3 source address"
+ " must be specified for"
+ " vxlan encapsulation");
+ }
+ return 0;
+}
+
+/**
+ * Validate VXLAN_ENCAP action RTE_FLOW_ITEM_TYPE_UDP item for E-Switch.
+ * The routine checks the UDP fields to be used in encapsulation header.
+ *
+ * @param[in] item
+ * Pointer to the item structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap_udp(const struct rte_flow_item *item,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *spec = item->spec;
+ const struct rte_flow_item_udp *mask = item->mask;
+
+ if (!spec) {
+ /*
+ * Specification for UDP ports cannot be empty
+ * because it is required by tunnel_key parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "NULL UDP port specification "
+ " for vxlan encapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ if (mask->hdr.dst_port != RTE_BE16(0x0000)) {
+ if (mask->hdr.dst_port != RTE_BE16(0xffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"udp.hdr.dst_port\" field"
+ " for vxlan encapsulation");
+ if (!spec->hdr.dst_port)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer UDP remote port cannot be"
+ " 0 for vxlan encapsulation");
+ } else {
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer UDP remote port"
+ " must be specified for"
+ " vxlan encapsulation");
+ }
+ if (mask->hdr.src_port != RTE_BE16(0x0000)) {
+ if (mask->hdr.src_port != RTE_BE16(0xffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"udp.hdr.src_port\" field"
+ " for vxlan encapsulation");
+ DRV_LOG(WARNING,
+ "outer UDP source port cannot be"
+ " forced for vxlan encapsulation,"
+ " parameter ignored");
+ }
+ return 0;
+}
+
+/**
+ * Validate VXLAN_ENCAP action RTE_FLOW_ITEM_TYPE_VXLAN item for E-Switch.
+ * The routine checks the VNIP fields to be used in encapsulation header.
+ *
+ * @param[in] item
+ * Pointer to the item structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap_vni(const struct rte_flow_item *item,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan *spec = item->spec;
+ const struct rte_flow_item_vxlan *mask = item->mask;
+
+ if (!spec) {
+ /* Outer VNI is required by tunnel_key parameter. */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "NULL VNI specification"
+ " for vxlan encapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_vxlan_mask;
+ if (!mask->vni[0] && !mask->vni[1] && !mask->vni[2])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "outer VNI must be specified "
+ "for vxlan encapsulation");
+ if (mask->vni[0] != 0xff ||
+ mask->vni[1] != 0xff ||
+ mask->vni[2] != 0xff)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"vxlan.vni\" field");
+
+ if (!spec->vni[0] && !spec->vni[1] && !spec->vni[2])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "vxlan vni cannot be 0");
+ return 0;
+}
+
+/**
+ * Validate VXLAN_ENCAP action item list for E-Switch.
+ * The routine checks items to be used in encapsulation header.
+ *
+ * @param[in] action
+ * Pointer to the VXLAN_ENCAP action structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_encap(const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *items;
+ int ret;
+ uint32_t item_flags = 0;
+
+ if (!action->conf)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "Missing vxlan tunnel"
+ " action configuration");
+ items = ((const struct rte_flow_action_vxlan_encap *)
+ action->conf)->definition;
+ if (!items)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "Missing vxlan tunnel"
+ " encapsulation parameters");
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ switch (items->type) {
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ ret = mlx5_flow_validate_item_eth(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ ret = flow_tcf_validate_vxlan_encap_eth(items, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_OUTER_L2;
+ break;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ret = mlx5_flow_validate_item_ipv4(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ ret = flow_tcf_validate_vxlan_encap_ipv4(items, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ret = mlx5_flow_validate_item_ipv6(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ ret = flow_tcf_validate_vxlan_encap_ipv6(items, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ ret = mlx5_flow_validate_item_udp(items, item_flags,
+ 0xFF, error);
+ if (ret < 0)
+ return ret;
+ ret = flow_tcf_validate_vxlan_encap_udp(items, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ ret = mlx5_flow_validate_item_vxlan(items,
+ item_flags, error);
+ if (ret < 0)
+ return ret;
+ ret = flow_tcf_validate_vxlan_encap_vni(items, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN;
+ break;
+ default:
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, items,
+ "vxlan encap item not supported");
+ }
+ }
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "no outer IP layer found"
+ " for vxlan encapsulation");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "no outer UDP layer found"
+ " for vxlan encapsulation");
+ if (!(item_flags & MLX5_FLOW_LAYER_VXLAN))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "no VXLAN VNI found"
+ " for vxlan encapsulation");
+ return 0;
+}
+
+/**
+ * Validate RTE_FLOW_ITEM_TYPE_IPV4 item if VXLAN_DECAP action
+ * is present in actions list.
+ *
+ * @param[in] ipv4
+ * Outer IPv4 address item (if any, NULL otherwise).
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_decap_ipv4(const struct rte_flow_item *ipv4,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *spec = ipv4->spec;
+ const struct rte_flow_item_ipv4 *mask = ipv4->mask;
+
+ if (!spec) {
+ /*
+ * Specification for IP addresses cannot be empty
+ * because it is required as decap parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
+ "NULL outer ipv4 address"
+ " specification for vxlan"
+ " for vxlan decapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ if (mask->hdr.dst_addr != RTE_BE32(0x00000000)) {
+ if (mask->hdr.dst_addr != RTE_BE32(0xffffffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv4.hdr.dst_addr\" field");
+ /* More IP address validations can be put here. */
+ } else {
+ /*
+ * Kernel uses the destination IP address
+ * to determine the ingress network interface
+ * for traffic being decapsulated.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
+ "outer ipv4 destination address"
+ " must be specified for"
+ " vxlan decapsulation");
+ }
+ /* Source IP address is optional for decap. */
+ if (mask->hdr.src_addr != RTE_BE32(0x00000000) &&
+ mask->hdr.src_addr != RTE_BE32(0xffffffff))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv4.hdr.src_addr\" field");
+ return 0;
+}
+
+/**
+ * Validate RTE_FLOW_ITEM_TYPE_IPV6 item if VXLAN_DECAP action
+ * is present in actions list.
+ *
+ * @param[in] ipv6
+ * Outer IPv6 address item (if any, NULL otherwise).
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_decap_ipv6(const struct rte_flow_item *ipv6,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *spec = ipv6->spec;
+ const struct rte_flow_item_ipv6 *mask = ipv6->mask;
+
+ if (!spec) {
+ /*
+ * Specification for IP addresses cannot be empty
+ * because it is required as decap parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
+ "NULL outer ipv6 address"
+ " specification for vxlan"
+ " decapsulation");
+ }
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ if (memcmp(&mask->hdr.dst_addr,
+ &flow_tcf_mask_empty.ipv6.hdr.dst_addr,
+ IPV6_ADDR_LEN)) {
+ if (memcmp(&mask->hdr.dst_addr,
+ &rte_flow_item_ipv6_mask.hdr.dst_addr,
+ IPV6_ADDR_LEN))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv6.hdr.dst_addr\" field");
+ /* More IP address validations can be put here. */
+ } else {
+ /*
+ * Kernel uses the destination IP address
+ * to determine the ingress network interface
+ * for traffic being decapsulated.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
+ "outer ipv6 destination address must be "
+ "specified for vxlan decapsulation");
+ }
+ /* Source IP address is optional for decap. */
+ if (memcmp(&mask->hdr.src_addr,
+ &flow_tcf_mask_empty.ipv6.hdr.src_addr,
+ IPV6_ADDR_LEN)) {
+ if (memcmp(&mask->hdr.src_addr,
+ &rte_flow_item_ipv6_mask.hdr.src_addr,
+ IPV6_ADDR_LEN))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"ipv6.hdr.src_addr\" field");
+ }
+ return 0;
+}
+
+/**
+ * Validate RTE_FLOW_ITEM_TYPE_UDP item if VXLAN_DECAP action
+ * is present in actions list.
+ *
+ * @param[in] udp
+ * Outer UDP layer item (if any, NULL otherwise).
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ **/
+static int
+flow_tcf_validate_vxlan_decap_udp(const struct rte_flow_item *udp,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *spec = udp->spec;
+ const struct rte_flow_item_udp *mask = udp->mask;
+
+ if (!spec)
+ /*
+ * Specification for UDP ports cannot be empty
+ * because it is required as decap parameter.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, udp,
+ "NULL UDP port specification"
+ " for VXLAN decapsulation");
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ if (mask->hdr.dst_port != RTE_BE16(0x0000)) {
+ if (mask->hdr.dst_port != RTE_BE16(0xffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"udp.hdr.dst_port\" field");
+ if (!spec->hdr.dst_port)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, udp,
+ "zero decap local UDP port");
+ } else {
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, udp,
+ "outer UDP destination port must be "
+ "specified for vxlan decapsulation");
+ }
+ if (mask->hdr.src_port != RTE_BE16(0x0000)) {
+ if (mask->hdr.src_port != RTE_BE16(0xffff))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "no support for partial mask on"
+ " \"udp.hdr.src_port\" field");
+ DRV_LOG(WARNING,
+ "outer UDP local port cannot be "
+ "forced for VXLAN encapsulation, "
+ "parameter ignored");
+ }
+ return 0;
+}
+
+/**
* Validate flow for E-Switch.
*
* @param[in] priv
@@ -1147,6 +1806,7 @@ flow_tcf_validate(struct rte_eth_dev *dev,
const struct rte_flow_item_ipv6 *ipv6;
const struct rte_flow_item_tcp *tcp;
const struct rte_flow_item_udp *udp;
+ const struct rte_flow_item_vxlan *vxlan;
} spec, mask;
union {
const struct rte_flow_action_port_id *port_id;
@@ -1156,6 +1816,7 @@ flow_tcf_validate(struct rte_eth_dev *dev,
of_set_vlan_vid;
const struct rte_flow_action_of_set_vlan_pcp *
of_set_vlan_pcp;
+ const struct rte_flow_action_vxlan_encap *vxlan_encap;
const struct rte_flow_action_set_ipv4 *set_ipv4;
const struct rte_flow_action_set_ipv6 *set_ipv6;
} conf;
@@ -1242,6 +1903,15 @@ flow_tcf_validate(struct rte_eth_dev *dev,
" set action must follow push action");
current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ current_action_flag = MLX5_FLOW_ACTION_VXLAN_DECAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ ret = flow_tcf_validate_vxlan_encap(actions, error);
+ if (ret < 0)
+ return ret;
+ current_action_flag = MLX5_FLOW_ACTION_VXLAN_ENCAP;
+ break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_SRC;
break;
@@ -1303,11 +1973,32 @@ flow_tcf_validate(struct rte_eth_dev *dev,
actions,
"can't have multiple fate"
" actions");
+ if ((current_action_flag & MLX5_TCF_VXLAN_ACTIONS) &&
+ (action_flags & MLX5_TCF_VXLAN_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "can't have multiple vxlan"
+ " actions");
+ if ((current_action_flag & MLX5_TCF_VXLAN_ACTIONS) &&
+ (action_flags & MLX5_TCF_VLAN_ACTIONS))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "can't have vxlan and vlan"
+ " actions in the same rule");
action_flags |= current_action_flag;
}
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
unsigned int i;
+ if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ items->type != RTE_FLOW_ITEM_TYPE_ETH)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "only L2 inner item"
+ " is supported");
switch (items->type) {
case RTE_FLOW_ITEM_TYPE_VOID:
break;
@@ -1361,7 +2052,9 @@ flow_tcf_validate(struct rte_eth_dev *dev,
error);
if (ret < 0)
return ret;
- item_flags |= MLX5_FLOW_LAYER_OUTER_L2;
+ item_flags |= (item_flags & MLX5_FLOW_LAYER_TUNNEL) ?
+ MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
/* TODO:
* Redundant check due to different supported mask.
* Same for the rest of items.
@@ -1439,6 +2132,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
next_protocol =
((const struct rte_flow_item_ipv4 *)
(items->spec))->hdr.next_proto_id;
+ if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
+ ret = flow_tcf_validate_vxlan_decap_ipv4
+ (items, error);
+ if (ret < 0)
+ return ret;
+ }
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
ret = mlx5_flow_validate_item_ipv6(items, item_flags,
@@ -1466,6 +2165,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
next_protocol =
((const struct rte_flow_item_ipv6 *)
(items->spec))->hdr.proto;
+ if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
+ ret = flow_tcf_validate_vxlan_decap_ipv6
+ (items, error);
+ if (ret < 0)
+ return ret;
+ }
break;
case RTE_FLOW_ITEM_TYPE_UDP:
ret = mlx5_flow_validate_item_udp(items, item_flags,
@@ -1481,6 +2186,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
error);
if (!mask.udp)
return -rte_errno;
+ if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
+ ret = flow_tcf_validate_vxlan_decap_udp
+ (items, error);
+ if (ret < 0)
+ return ret;
+ }
break;
case RTE_FLOW_ITEM_TYPE_TCP:
ret = mlx5_flow_validate_item_tcp
@@ -1500,10 +2211,40 @@ flow_tcf_validate(struct rte_eth_dev *dev,
if (!mask.tcp)
return -rte_errno;
break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ if (!(action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "vni pattern should be followed by"
+ " vxlan decapsulation action");
+ ret = mlx5_flow_validate_item_vxlan(items,
+ item_flags, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN;
+ mask.vxlan = flow_tcf_item_mask
+ (items, &rte_flow_item_vxlan_mask,
+ &flow_tcf_mask_supported.vxlan,
+ &flow_tcf_mask_empty.vxlan,
+ sizeof(flow_tcf_mask_supported.vxlan), error);
+ if (!mask.vxlan)
+ return -rte_errno;
+ if (mask.vxlan->vni[0] != 0xff ||
+ mask.vxlan->vni[1] != 0xff ||
+ mask.vxlan->vni[2] != 0xff)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ mask.vxlan,
+ "no support for partial or "
+ "empty mask on \"vxlan.vni\" field");
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
- NULL, "item not supported");
+ items, "item not supported");
}
}
if ((action_flags & MLX5_TCF_PEDIT_ACTIONS) &&
@@ -1572,6 +2313,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
RTE_FLOW_ERROR_TYPE_ACTION, actions,
"vlan actions are supported"
" only with port_id action");
+ if ((action_flags & MLX5_TCF_VXLAN_ACTIONS) &&
+ !(action_flags & MLX5_FLOW_ACTION_PORT_ID))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "vxlan actions are supported"
+ " only with port_id action");
if (!(action_flags & MLX5_TCF_FATE_ACTIONS))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, actions,
@@ -1595,6 +2342,28 @@ flow_tcf_validate(struct rte_eth_dev *dev,
"no ethernet found in"
" pattern");
}
+ if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
+ if (!(item_flags &
+ (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no outer IP pattern found"
+ " for vxlan decap action");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no outer UDP pattern found"
+ " for vxlan decap action");
+ if (!(item_flags & MLX5_FLOW_LAYER_VXLAN))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no VNI pattern found"
+ " for vxlan decap action");
+ }
return 0;
}