summaryrefslogtreecommitdiff
path: root/README.md
blob: 3d3a1611e761533b4f322bfc84554b935a06149f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
Pktgen - Traffic Generator powered by DPDK
=====================================================

**Pktgen is a traffic generator powered by DPDK at wire rate traffic with 64 byte frames.**

** (Pktgen) Sounds like 'Packet-Gen'**

---
**Copyright &copy; \<2010-2019\>, Intel Corporation. All rights reserved.**

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

- Redistributions of source code must retain the above copyright
  notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright
  notice, this list of conditions and the following disclaimer in
  the documentation and/or other materials provided with the
  distribution.

- Neither the name of Intel Corporation nor the names of its
  contributors may be used to endorse or promote products derived
  from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.

SPDX-License-Identifier: BSD-3-Clause

Pktgen: Created 2010-2018 by Keith Wiles @ Intel.com
---

Note: In DPKD 19.08-rc0 a large number of defines and function names were
      changed. In Pktgen  3.7.0 I added a pg_compat.h header to help
      compatibility issues with these name changes. This means versions
      3.6.6 and below will have trouble builging with DPDK starting with
      19.08-rc0 or just after the 19.05 release. 


*** Pktgen command line directory format ***

``
-- Pktgen Ver: 3.7.0 (DPDK 19.08.0-rc0)  Powered by DPDK ---------------



Pktgen:/> ls
[pktgen]        [sbin]          copyright
Pktgen:/> ls pktgen/bin
off             on              debug           set             pcap
stp             str             stop            start           disable
enable          range           theme           page            seq
sequence        ping4           port            restart         rst
reset           cls             redisplay       save            lua
script          load            geom            geometry        clr
clear.stats     help
Pktgen:/>
``
-------------------------------------------------------------------------------
``
Pktgen:/> ls
[pktgen]        [sbin]          copyright
Pktgen:/> ls sbin
env             dbg             path            hugepages       cmap
sizes           more            history         quit            clear
pwd             cd              ls              rm              mkdir
chelp           sleep           delay
Pktgen:/>
``
-------------------------------------------------------------------------------
``
Pktgen:/> cd sbin
Pktgen:/sbin/>
Pktgen:/sbin/> ls -l
  env              Command : Set up environment variables
  dbg              Command : debug commands
  path             Command : display the command path list
  hugepages        Command : hugepages # display hugepage info
  cmap             Command : cmap # display the core mapping
  sizes            Command : sizes # display some internal sizes
  more             Command : more <file> # display a file content
  history          Command : history # display the current history
  quit             Command : quit # quit the application
  clear            Command : clear # clear the screen
  pwd              Command : pwd # display current working directory
  cd               Command : cd <dir> # change working directory
  ls               Command : ls [-lr] <dir> # list current directory
  rm               Command : remove a file or directory
  mkdir            Command : create a directory
  chelp            Command : CLI help - display information for DPDK
  sleep            Command : delay a number of seconds
  delay            Command : delay a number of milliseconds

Pktgen:/sbin/>
Pktgen:/sbin/> cd ..
Pktgen:/>
``
-------------------------------------------------------------------------------
``
Pktgen:/pktgen/> cd bin
Pktgen:/pktgen/bin/> ls -l
  off              Alias : disable screen
  on               Alias : enable screen
  debug            Command : debug commands
  set              Command : set a number of options
  pcap             Command : pcap commands
  stp              Alias : stop all
  str              Alias : start all
  stop             Command : stop features
  start            Command : start features
  disable          Command : disable features
  enable           Command : enable features
  range            Command : Range commands
  theme            Command : Set, save, show the theme
  page             Command : change page displays
  seq              Alias : sequence
  sequence         Command : sequence command
  ping4            Command : Send a ping packet for IPv4
  port             Command : Switch between ports
  restart          Command : restart port
  rst              Alias : reset all
  reset            Command : reset pktgen configuration
  cls              Alias : redisplay
  redisplay        Command : redisplay the screen
  save             Command : save the current state
  lua              Command : execute a Lua string
  script           Command : run a Lua script
  load             Command : load command file
  geom             Alias : geometry
  geometry         Command : set the screen geometry
  clr              Alias : clear.stats all
  clear.stats      Command : clear stats
  help             Command : help command

Pktgen:/pktgen/bin/>
``


run pktgen type `sudo -E ./tools/run.sh`.
`run.sh` is a script designed to help you with the command line options of pktgen.
You may need to modify this script for your system and configuration.

    # cat ./tools/run.sh
    #!/bin/bash

    #rkwiles@rkwiles-desk:~/projects/intel/dpdk$ lspci |grep Ether
    #06:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #06:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #08:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #08:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #09:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    #09:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
    #83:00.1 Ethernet controller: Intel Corporation DH8900CC Null Device (rev 21)
    #87:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #87:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #89:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
    #89:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)

if [ $name == "rkwiles-supermicro" ]; then
./app/app/${target}/pktgen -l 4-12 -n 3 --proc-type auto --file-prefix pg -b 06:00.0 -b 06:00.1 -b 08:00.0 -b 08:00.1 -b 09:00.0 -b 09:00.1 -b 83:00.1 -- -T -P -m "[5:7].0, [6:8].1, [9:11].2, [10:12].3" -f themes/black-yellow.theme
fi
``
** Note: The '-m NNN' in the DPDK arguments is to have DPDK allocate 512 megs of memory.
 The '--socket-mem 256,156' DPDK command will allocate 256M from each CPU (two in this
 case). Do not use the '-m NNN' and '--socket-mem NN,NN' commands on the same command
 line.

** Note: As of DPDK 18.05 using -m or --socket-mem is not required as memory is now
dynamically allocated.

The pktgen program follows the same format as a standard DPDK linux, meaning
the first set of arguments '-l 0-4' are the standard DPDK arguments. This option
defines the number of logical cores to be used by pktgen. The 1f states 5 lcores
are used and the '3c' is just a bit array for each lcore to be used. The '-P' enables
promiscuous mode on all ports if you need that support. The '-m "..."' sets up the
port to lcore mapping for pktgen.

The second half of the command line followed by the '--' is pktgen specific
options.

The pktgen requires 2 logical cores for a minimum system. The first lcore 0 used
for pktgen command line and is used for timers also displaying the text on the
screen and lcores 1-n are used to do the packet receive and transmits along with
anything else related to packets. You do not need to start at lcore zero, but the first
lcore in the bitmap from in the least signification bit location is the display and
timer lcore used by pktgen.

The -m format now allows the developer to have different lcores for rx and tx
instead of rx/tx on the same lcore. The above format of {1:3}.0 states to use
lcore 1 for rx and lcore 3 for tx on port 0. Make sure you select different
lcores for the rx and tx so that only a single rx or tx function is on
a single physical core. If you pick the rx/tx functions on different lcores, but
on the same physical core you will not be able to get the performance you want as the
single physical core will be trying to do both Rx/Tx functions.

*** New setup and run python script with config files ***

Using the new tools/run.py script to setup and run pktgen with different configurations. The configuration files are located in the cfg directory with filenames ending in .cfg.

To use a configuration file;
``
$ ./tools/run.py -s default  # to setup the ports and attach them to DPDK (only needed once per boot)

$ ./tools/run.py default     # Run the default configuration
``
The configuration files are python scripts or a set of variables that run.py uses to initialize and run pktgen.
Here is an example of the default.cfg file:

``
	description = 'A Pktgen default simple configuration'

	# Setup configuration
	setup = {
	    'exec': (
		'sudo', '-E'
		),

	    'devices': (
		    '81:00.0', '81:00.1', '81:00.2', '81:00.3',
		    '83:00.0', '83:00.1', '83:00.2', '83:00.3'
		    ),
	    # UIO module type, igb_uio, vfio-pci or uio_pci_generic
	    'uio': 'vfio-pci'
	    }

	# Run command and options
	run = {
	    'exec': (
		'sudo', '-E'
		),

	    # Application name and use app_path to help locate the app
	    'app_name': 'pktgen',

	    # using (sdk) or (target) for specific variables
	    # add (app_name) of the application
	    # Each path is tested for the application
	    'app_path': (
		'./app/%(target)s/%(app_name)s',
		'%(sdk)s/%(target)s/app/%(app_name)s',
		),

	    'cores': '14,15-22',
	    'nrank': '4',
	    'proc': 'auto',
	    'log': '7',
	    'prefix': 'pg',

	    'blacklist': (
		#'81:00.0', '81:00.1', '81:00.2', '81:00.3',
		#'83:00.0', '83:00.1', '83:00.2', '83:00.3',
		'81:00.2', '81:00.3',
		'83:00.2', '83:00.3'
		),

	    'opts': (
		'-T',
		'-P',
		),
	    'map': (
		'[15:16].0',
		'[17:18].1',
		'[19:20].2',
		'[21:22].3'
		),

	    'theme': 'themes/black-yellow.theme'
	}
``

``
Usage: ./app/pktgen -l CORELIST [-n NUM] [-m NB] [-r NUM] [-b <domain:bus:devid.func>][--proc-type primary|secondary|auto]

Copyright (c) <2010-2019>, Intel Corporation. All rights reserved. Powered by DPDK
./app/app/x86_64-dnet-linux-gcc/pktgen: invalid option -- 'x'
EAL: Detected 72 lcore(s)
./app/app/x86_64-dnet-linux-gcc/pktgen: invalid option -- 'x'

Usage: ./app/app/x86_64-dnet-linux-gcc/pktgen [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  --master-lcore ID   Core ID that is used as master
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --pci-blacklist Add a PCI device in black list.
                      Prevent EAL from using this PCI device. The argument
                      format is <domain:bus:devid.func>.
  -w, --pci-whitelist Add a PCI device in white list.
                      Only use the specified PCI devices. The argument format
                      is <[domain:]bus:devid.func>. This option can be present
                      several times (once per device).
                      [NOTE: PCI whitelist cannot be used with -b option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level         Set default log level
  -v                  Display version information on startup
  -h, --help          This help

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --base-virtaddr     Base virtual address
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --xen-dom0          Support running on Xen dom0 without hugetlbfs


===== Application Usage =====

Usage: ./app/app/x86_64-dnet-linux-gcc/pktgen [EAL options] -- [-h] [-v] [-P] [-G] [-T] [-f cmd_file] [-l log_file] [-s P:PCAP_file[,PCap_file]] [-m <string>]
  -s P:file1,file2    PCAP packet stream file per queue, 'P' is the port number
  -f filename  Command file (.pkt) to execute or a Lua script (.lua) file
  -l filename  Write log to filename
  -P           Enable PROMISCUOUS mode on all ports
  -g address   Optional IP address and port number default is (localhost:0x5606)
               If -g is used that enable socket support as a server application
  -G           Enable socket support using default server values localhost:0x5606
  -N           Enable NUMA support
  -T           Enable the color output
  -v           Verbose flags for startup messages
  --crc-strip  Strip CRC on all ports
  -m <string>  matrix for mapping ports to logical cores
      BNF: (or kind of BNF)
      <matrix-string>   := """ <lcore-port> { "," <lcore-port>} """
      <lcore-port>      := <lcore-list> "." <port-list>
      <lcore-list>      := "[" <rx-list> ":" <tx-list> "]"
      <port-list>       := "[" <rx-list> ":" <tx-list>"]"
      <rx-list>         := <num> { "/" (<num> | <list>) }
      <tx-list>         := <num> { "/" (<num> | <list>) }
      <list>            := <num> { "/" (<range> | <list>) }
      <range>           := <num> "-" <num> { "/" <range> }
      <num>             := <digit>+
      <digit>           := 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
      1.0, 2.1, 3.2                 - core 1 handles port 0 rx/tx,
                                      core 2 handles port 1 rx/tx
                                      core 3 handles port 2 rx/tx
      1.[0-2], 2.3, ...             - core 1 handle ports 0,1,2 rx/tx,
                                      core 2 handle port 3 rx/tx
      [0-1].0, [2/4-5].1, ...       - cores 0-1 handle port 0 rx/tx,
                                      cores 2,4,5 handle port 1 rx/tx
      [1:2].0, [4:6].1, ...         - core 1 handles port 0 rx,
                                      core 2 handles port 0 tx,
      [1:2].[0-1], [4:6].[2/3], ... - core 1 handles port 0 & 1 rx,
                                      core 2 handles port  0 & 1 tx
      [1:2-3].0, [4:5-6].1, ...     - core 1 handles port 0 rx, cores 2,3 handle port 0 tx
                                      core 4 handles port 1 rx & core 5,6 handles port 1 tx
      [1-2:3].0, [4-5:6].1, ...     - core 1,2 handles port 0 rx, core 3 handles port 0 tx
                                      core 4,5 handles port 1 rx & core 6 handles port 1 tx
      [1-2:3-5].0, [4-5:6/8].1, ... - core 1,2 handles port 0 rx, core 3,4,5 handles port 0 tx
                                      core 4,5 handles port 1 rx & core 6,8 handles port 1 tx
      [1:2].[0:0-7], [3:4].[1:0-7], - core 1 handles port 0 rx, core 2 handles ports 0-7 tx
                                      core 3 handles port 1 rx & core 4 handles port 0-7 tx
      BTW: you can use "{}" instead of "[]" as it does not matter to the syntax.
  -h           Display the help information
``
A new feature for pktgen and DPDK is to run multiple instances of pktgen. This
allows the developer to share ports on the same machine.

------------- run.sh script ----------------
``
#!/bin/bash

# Normal setup
# different cores for each port.

name=`uname -n`

# Use './tools/setup.sh' to include environment variables

if [ -z ${RTE_SDK} ] ; then
echo "*** RTE_SDK is not set, did you forget to do 'sudo -E ./tools/setup.sh'"
	export RTE_SDK=/work/home/rkwiles/projects/intel/dpdk
	export RTE_TARGET=x86_64-native-linux-clang
fi
sdk=${RTE_SDK}

if [ -z ${RTE_TARGET} ]; then
echo "*** RTE_TARGET is not set, did you forget to do 'sudo -E ./tools/setup.sh'"
target=x86_64-pktgen-linux-gcc
else
target=${RTE_TARGET}
fi


#rkwiles@rkwiles-desk:~/projects/intel/dpdk$ lspci |grep Ether
#06:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#06:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#08:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#08:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#09:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
#09:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
#83:00.1 Ethernet controller: Intel Corporation DH8900CC Null Device (rev 21)
#87:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#87:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#89:00.0 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)
#89:00.1 Ethernet controller: Intel Corporation Ethernet Converged Network Adapter X520-Q1 (rev 01)

if [ $name == "rkwiles-supermicro" ]; then
./app/app/${target}/pktgen -l 4-16 -n 3 --proc-type auto --file-prefix pg -b 06:00.0 -b 06:00.1 -b 08:00.0 -b 08:00.1 -b 09:00.0 -b 09:00.1 -b 83:00.1 -- -T -P -m "[5:7].0, [6:8].1, [9:11].2, [10:12].3" -f themes/black-yellow.theme
fi

#00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-V
#01:00.1 Ethernet controller: Intel Corporation DH8900CC Series Gigabit Network Connection (rev 10)
#01:00.2 Ethernet controller: Intel Corporation DH8900CC Series Gigabit Network Connection (rev 10)
#01:00.3 Ethernet controller: Intel Corporation DH8900CC Series Gigabit Network Connection (rev 10)
#01:00.4 Ethernet controller: Intel Corporation DH8900CC Series Gigabit Network Connection (rev 10)

if [ $name == "rkwiles-mini-i7" ]; then
./app/app/${target}/pktgen -l 0-4 -n 3 --proc-type auto --file-prefix pg -- -T -P -m "1.0, 2.1, 3.2, 4.3" -f themes/black-yellow.theme
fi
``
------------- run.sh script ----------------

------------- setup.sh script ----------------
``
#!/bin/bash

# Use './tools/setup.sh' to include environment variables

if [ -z ${RTE_SDK} ] ; then
	echo "*** RTE_SDK is not set, did you forget to do 'sudo -E ./tools/setup.sh'"
	echo "Using "${RTE_SDK}
	export RTE_SDK=/work/home/rkwiles/projects/intel/dpdk
	export RTE_TARGET=x86_64-native-linux-clang
fi
sdk=${RTE_SDK}

if [ -z ${RTE_TARGET} ]; then
	echo "*** RTE_TARGET is not set, did you forget to do 'sudo -E ./tools/setup.sh'"
	target=x86_64-pktgen-linux-gcc
else
	target=${RTE_TARGET}
fi

echo "Using directory: "$sdk"/"$target

function nr_hugepages_fn {
echo /sys/devices/system/node/node${1}/hugepages/hugepages-2048kB/nr_hugepages
}

function num_cpu_sockets {
local sockets=0
while [ -f $(nr_hugepages_fn $sockets) ]; do
		sockets=$(( $sockets + 1 ))
done
echo $sockets
	if [ $sockets -eq 0 ]; then
		echo "Huge TLB support not found make sure you are using a kernel >= 2.6.34" >&2
		exit 1
	fi
}

if [ $UID -ne 0 ]; then
	echo "You must run this script as root" >&2
exit 1
fi

rm -fr /mnt/huge/*

NR_HUGEPAGES=$(( `sysctl -n vm.nr_hugepages` / $(num_cpu_sockets) ))
echo "Setup "$(num_cpu_sockets)" socket(s) with "$NR_HUGEPAGES" pages."
for socket in $(seq 0 $(( $(num_cpu_sockets) - 1 )) ); do
	echo $NR_HUGEPAGES > $(nr_hugepages_fn $socket)
done

grep -i huge /proc/meminfo
modprobe uio
echo "trying to remove old igb_uio module and may get an error message, ignore it"
rmmod igb_uio
insmod $sdk/$target/kmod/igb_uio.ko
echo "trying to remove old rte_kni module and may get an error message, ignore it"
rmmod rte_kni
insmod $sdk/$target/kmod/rte_kni.ko "lo_mode=lo_mode_ring"

name=`uname -n`
if [ $name == "rkwiles-supermicro" ]; then
	$sdk/tools/dpdk_nic_bind.py -b igb_uio 06:00.0 06:00.1 08:00.0 08:00.1 87:00.0 87:00.1 89:00.0 89:00.1
fi
if [ $name == "rkwilesmini-i7" ]; then
	$sdk/tools/dpdk_nic_bind.py -b igb_uio 01:00.1 01:00.2 01:00.3 01:00.4
fi
$sdk/tools/dpdk_nic_bind.py --status
lspci |grep Ether
``
------------- setup script ----------------

If you have run pktgen before then remove the files in /mnt/huge/* before
running the new version.

Running the run.sh script produces output as follows, but maybe different on your
system configuration.
``
rkwiles@broadwell (dev):~/.../intel/pktgen$ ./tools/run.py default
>>> sdk '/work/home/rkwiles/projects/intel/dpdk.org', target 'x86_64-native-linux-gcc'
   Trying ./app/x86_64-native-linux-gcc/pktgen
sudo -E ./app/x86_64-native-linux-gcc/pktgen -l 14,15-22 -n 4 --proc-type auto --log-level 7 --file-prefix pg -b 81:00.2 -b 81:00.3 -b 85:00.2 -b 85:00.3 -b 83:00.0 -- -T -P --crc-strip -m [15:16].0 -m [17:18].1 -m [19:20].2 -m [21:22].3 -f themes/black-yellow.theme

Copyright (c) <2010-2019>, Intel Corporation. All rights reserved. Powered by DPDK
EAL: Detected 56 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Auto-detected process type: PRIMARY
EAL: Multi-process socket /var/run/dpdk/pg/mp_socket
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL:   probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:81:00.1 on NUMA socket 1
EAL:   probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:81:00.2 on NUMA socket 1
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:81:00.3 on NUMA socket 1
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:83:00.0 on NUMA socket 1
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:85:00.0 on NUMA socket 1
EAL:   probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:85:00.1 on NUMA socket 1
EAL:   probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:85:00.2 on NUMA socket 1
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:85:00.3 on NUMA socket 1
EAL:   Device is blacklisted, not initializing
Lua 5.3.5  Copyright (C) 1994-2018 Lua.org, PUC-Rio

*** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
*** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<

Initialize Port 0 -- TxQ 1, RxQ 1,  Src MAC 3c:fd:fe:a1:2b:40
Initialize Port 1 -- TxQ 1, RxQ 1,  Src MAC 3c:fd:fe:a1:2b:41
Initialize Port 2 -- TxQ 1, RxQ 1,  Src MAC 3c:fd:fe:a1:2b:08
Initialize Port 3 -- TxQ 1, RxQ 1,  Src MAC 3c:fd:fe:a1:2b:09

Port  0: Link Up - speed 10000 Mbps - full-duplex <Enable promiscuous mode>
Port  1: Link Up - speed 10000 Mbps - full-duplex <Enable promiscuous mode>
Port  2: Link Up - speed 10000 Mbps - full-duplex <Enable promiscuous mode>
Port  3: Link Up - speed 10000 Mbps - full-duplex <Enable promiscuous mode>


- Ports 0-3 of 4   <Main Page>  Copyright (c) <2010-2019>, Intel Corporation
  Flags:Port        :   P--------------:0   P--------------:1   P--------------:2   P--------------:3
Link State          :       <UP-10000-FD>       <UP-10000-FD>       <UP-10000-FD>       <UP-10000-FD>     ----TotalRate----
Pkts/s Max/Rx       :                 0/0                 0/0                 0/0                 0/0                   0/0
       Max/Tx       :                 0/0                 0/0                 0/0                 0/0                   0/0
MBits/s Rx/Tx       :                 0/0                 0/0                 0/0                 0/0                   0/0
Broadcast           :                   0                   0                   0                   0
Multicast           :                   0                   0                   0                   0
Sizes 64            :                   0                   0                   0                   0
      65-127        :                   0                   0                   0                   0
      128-255       :                   0                   0                   0                   0
      256-511       :                   0                   0                   0                   0
      512-1023      :                   0                   0                   0                   0
      1024-1518     :                   0                   0                   0                   0
Runts/Jumbos        :                 0/0                 0/0                 0/0                 0/0
ARP/ICMP Pkts       :                 0/0                 0/0                 0/0                 0/0
Errors Rx/Tx        :                 0/0                 0/0                 0/0                 0/0
Total Rx Pkts       :                   0                   0                   0                   0
      Tx Pkts       :                   0                   0                   0                   0
      Rx MBs        :                   0                   0                   0                   0
      Tx MBs        :                   0                   0                   0                   0
                    :
Pattern Type        :             abcd...             abcd...             abcd...             abcd...
Tx Count/% Rate     :       Forever /100%       Forever /100%       Forever /100%       Forever /100%
Pkt Size/Tx Burst   :           64 /   64           64 /   64           64 /   64           64 /   64
Port Src/Dest       :         1234 / 5678         1234 / 5678         1234 / 5678         1234 / 5678
Pkt Type:VLAN ID    :     IPv4 / TCP:0001     IPv4 / TCP:0001     IPv4 / TCP:0001     IPv4 / TCP:0001
802.1p CoS/DSCP/IPP :           0/  0/  0           0/  0/  0           0/  0/  0           0/  0/  0
VxLAN Flg/Grp/vid   :       0/    0/    0       0/    0/    0       0/    0/    0       0/    0/    0
IP  Destination     :         192.168.1.1         192.168.0.1         192.168.3.1         192.168.2.1
    Source          :      192.168.0.1/24      192.168.1.1/24      192.168.2.1/24      192.168.3.1/24
MAC Destination     :   3c:fd:fe:a1:2b:41   3c:fd:fe:a1:2b:40   3c:fd:fe:a1:2b:09   3c:fd:fe:a1:2b:08
    Source          :   3c:fd:fe:a1:2b:40   3c:fd:fe:a1:2b:41   3c:fd:fe:a1:2b:08   3c:fd:fe:a1:2b:09
PCI Vendor/Addr     :   8086:1572/81:00.0   8086:1572/81:00.1   8086:1572/85:00.0   8086:1572/85:00.1

-- Pktgen Ver: 3.5.9 (DPDK 19.02.0-rc1)  Powered by DPDK ----------------------


Pktgen:/> quit
$
``
------------------------------------------------------------------------
``
                                                  ** Pktgen Help Information **
page [0-7]                         - Show the port pages or configuration or sequence page
page main                          - Display page zero
page range                         - Display the range packet page
page config | cfg                  - Display the configuration page
page pcap                          - Display the pcap page
page cpu                           - Display some information about the CPU system
page next                          - Display next page of PCAP packets.
page sequence | seq                - sequence will display a set of packets for a given port
                                     Note: use the 'port <number>' to display a new port sequence
page rnd                           - Display the random bitfields to packets for a given port
                                     Note: use the 'port <number>' to display a new port sequence
page log                           - Display the log messages page
page latency                       - Display the latency page
page stats                         - Display physical ports stats for all ports
page xstats                        - Display port XSTATS values

enable|disable <portlist> process  - Enable or Disable processing of ARP/ICMP/IPv4/IPv6 packets
enable|disable <portlist> mpls     - Enable/disable sending MPLS entry in packets
enable|disable <portlist> qinq     - Enable/disable sending Q-in-Q header in packets
enable|disable <portlist> gre      - Enable/disable GRE support
enable|disable <portlist> gre_eth  - Enable/disable GRE with Ethernet frame payload
enable|disable <portlist> vlan     - Enable/disable VLAN tagging
enable|disable <portlist> garp     - Enable or Disable GARP packet processing and update MAC address
enable|disable <portlist> random   - Enable/disable Random packet support
enable|disable <portlist> latency  - Enable/disable latency testing
enable|disable <portlist> pcap     - Enable or Disable sending pcap packets on a portlist
enable|disable <portlist> blink    - Blink LED on port(s)
enable|disable <portlist> rx_tap   - Enable/Disable RX Tap support
enable|disable <portlist> tx_tap   - Enable/Disable TX Tap support
enable|disable <portlist> icmp     - Enable/Disable sending ICMP packets
enable|disable <portlist> range    - Enable or Disable the given portlist for sending a range of packets
enable|disable <portlist> capture  - Enable/disable packet capturing on a portlist, disable to save capture
                                     Disable capture on a port to save the data into the currect working directory.
enable|disable <portlist> bonding  - Enable call TX with zero packets for bonding driver
enable|disable <portlist> short    - Allow shorter then 64 byte frames to be sent
enable|disable <portlist> vxlan    - Send VxLAN packets
enable|disable mac_from_arp        - Enable/disable MAC address from ARP packet
enable|disable screen              - Enable/disable updating the screen and unlock/lock window
    off                            - screen off shortcut
    on                             - screen on shortcut

    note: <portlist>               - a list of ports (no spaces) e.g. 2,4,6-9,12 or the word 'all'
set <portlist> count <value>       - number of packets to transmit
set <portlist> size <value>        - size of the packet to transmit
set <portlist> rate <percent>      - Packet rate in percentage
set <portlist> burst <value>       - number of packets in a burst
set <portlist> tx_cycles <value>   - DEBUG to set the number of cycles per TX burst
set <portlist> sport <value>       - Source port number for TCP
set <portlist> dport <value>       - Destination port number for TCP
set <portlist> seq_cnt|seqcnt|seqCnt <value>
                                   - Set the number of packet in the sequence to send [0-16]
set <portlist> prime <value>       - Set the number of packets to send on prime command
set <portlist> dump <value>        - Dump the next N received packets to the screen
set <portlist> vlan <value>        - Set the VLAN ID value for the portlist
set <portlist> jitter <value>      - Set the jitter threshold in micro-seconds
set <portlist> src|dst mac <addr>  - Set MAC addresses 00:11:22:33:44:55 or 0011:2233:4455 format
set <portlist> type ipv4|ipv6|vlan|arp - Set the packet type to IPv4 or IPv6 or VLAN
set <portlist> proto udp|tcp|icmp  - Set the packet protocol to UDP or TCP or ICMP per port
set <portlist> pattern <type>      - Set the fill pattern type
                 type - abc        - Default pattern of abc string
                        none       - No fill pattern, maybe random data
                        zero       - Fill of zero bytes
                        user       - User supplied string of max 16 bytes
set <portlist> user pattern <string> - A 16 byte string, must set 'pattern user' command
set <portlist> [src|dst] ip ipaddr - Set IP addresses, Source must include network mask e.g. 10.1.2.3/24
set <portlist> qinqids <id1> <id2> - Set the Q-in-Q ID's for the portlist
set <portlist> rnd <idx> <off> <mask> - Set random mask for all transmitted packets from portlist
    idx: random mask index slot
    off: offset in bytes to apply mask value
    mask: up to 32 bit long mask specification (empty to disable):
          0: bit will be 0
          1: bit will be 1
          .: bit will be ignored (original value is retained)
          X: bit will get random value
set <portlist> cos <value>         - Set the CoS value for the portlist
set <portlist> tos <value>         - Set the ToS value for the portlist
set <portlist> vxlan <flags> <group id> <vxlan_id> - Set the vxlan values
set ports_per_page <value>         - Set ports per page value 1 - 6

  -- Setup the packet range values --
   note: SMMI = start|min|max|inc (start, minimum, maximum, increment)

range <portlist> src|dst mac <SMMI> <etheraddr> - Set destination/source MAC address
      e.g: range 0 src mac start 00:00:00:00:00:00
           range 0 dst mac max 00:12:34:56:78:90
      or  range 0 src mac 00:00:00:00:00:00 00:00:00:00:00:00 00:12:34:56:78:90 00:00:00:01:01:01
range <portlist> src|dst ip <SMMI> <ipaddr>   - Set source IP start address
      e.g: range 0 dst ip start 0.0.0.0
           range 0 dst ip min 0.0.0.0
           range 0 dst ip max 1.2.3.4
           range 0 dst ip inc 0.0.1.0
       or  range 0 dst ip 0.0.0.0 0.0.0.0 1.2.3.4 0.0.1.0
range <portlist> proto tcp|udp                - Set the IP protocol type
range <portlist> src|dst port <SMMI> <value>  - Set UDP/TCP source/dest port number
       or  range <portlist> src|dst port <start> <min> <max> <inc>
range <portlist> vlan <SMMI> <value>          - Set vlan id start address
      or  range <portlist> vlan <start> <min> <max> <inc>
range <portlist> size <SMMI> <value>          - Set pkt size start address
      or  range <portlist> size <start> <min> <max> <inc>
range <portlist> teid <SMMI> <value>          - Set TEID value
      or  range <portlist> teid <start> <min> <max> <inc>
range <portlist> mpls entry <hex-value>       - Set MPLS entry value
range <portlist> qinq index <val1> <val2>     - Set QinQ index values
range <portlist> gre key <value>              - Set GRE key value
range <portlist> cos <SMMI> <value>           - Set cos value
range <portlist> tos <SMMI> <value>           - Set tos value

sequence <seq#> <portlist> dst <Mac> src <Mac> dst <IP> src <IP> sport <val> dport <val> ipv4|ipv6 udp|tcp|icmp vlan <val> size <val> [teid <val>]
sequence <seq#> <portlist> <dst-Mac> <src-Mac> <dst-IP> <src-IP> <sport> <dport> ipv4|ipv6 udp|tcp|icmp <vlanid> <pktsize> [<teid>]
sequence <seq#> <portlist> cos <cos> tos <tos>
                                   - Set the sequence packet information, make sure the src-IP
                                     has the netmask value eg 1.2.3.4/24

pcap show                          - Show PCAP information
pcap <index>                       - Move the PCAP file index to the given packet number,  0 - rewind, -1 - end of file
pcap filter <portlist> <string>    - PCAP filter string to filter packets on receive

start <portlist>                   - Start transmitting packets
stop <portlist>                    - Stop transmitting packets
stp                                - Stop all ports from transmitting
str                                - Start all ports transmitting
start <portlist> prime             - Transmit packets on each port listed. See set prime command above
start <portlist> arp <type>        - Send a ARP type packet
    type - request | gratuitous | req | grat

dbg l2p                          - Dump out internal lcore to port mapping
dbg tx_dbg                       - Enable tx debug output
dbg mempool|dump <portlist> <type>    - Dump out the mempool info for a given type
dbg pdump <portlist>             - Hex dump the first packet to be sent, single packet mode only
dbg memzone                      - List all of the current memzones
dbg memseg                       - List all of the current memsegs
dbg hexdump <addr> <len>         - hex dump memory at given address
dbg break                        - break into the debugger
dbg memcpy [loop-cnt KBytes]     - run a memcpy test

save <path-to-file>                - Save a configuration file using the filename
load <path-to-file>                - Load a command/script file from the given path
script <filename>                  - Execute the Lua script code in file (www.lua.org).
lua 'lua string'                   - Execute the Lua code in the string needs quotes
geometry <geom>                    - Set the display geometry Columns by Rows (ColxRow)
clear <portlist> stats             - Clear the statistics
clr                                - Clear all Statistices
reset <portlist>                   - Reset the configuration the ports to the default
rst                                - Reset the configuration for all ports
ports per page [1-6]               - Set the number of ports displayed per page
port <number>                      - Sets the sequence packets to display for a given port
restart <portlist>                 - Restart or stop a ethernet port and restart
ping4 <portlist>                   - Send a IPv4 ICMP echo request on the given portlist

theme <item> <fg> <bg> <attr>      - Set color for item with fg/bg color and attribute value
theme show                         - List the item strings, colors and attributes to the items
theme save <filename>              - Save the current color theme to a file

       Flags: P--------------- - Promiscuous mode enabled
               E               - ICMP Echo enabled
                A              - Send ARP Request flag
                 G             - Send Gratuitous ARP flag
                  C            - TX Cleanup flag
                   p           - PCAP enabled flag
                    S          - Send Sequence packets enabled
                     R         - Send Range packets enabled
                      D        - DPI Scanning enabled (If Enabled)
                       I       - Process packets on input enabled
                        *      - Using TAP interface for this port can be [-rt*]
                         L     - Send Latency packets
                          V    - Send VLAN ID tag
                          X    - Send VxLAN packets
                          M    - Send MPLS header
                          Q    - Send Q-in-Q tags
                           g   - Perform GRE with IPv4 payload
                           G   - Perform GRE with Ethernet payload
                            C  - Capture received packets
                             R - Random bitfield(s) are applied
                              B- Bonding enabled for LACP 802.3ad
Notes: <state>       - Use enable|disable or on|off to set the state.
       <portlist>    - a list of ports (no spaces) as 2,4,6-9,12 or 3-5,8 or 5 or the word 'all'
       Color best seen on a black background for now

``
---------------------------------------------------------------------------
``
\                  <Sequence Page>  Copyright (c) <2010-2019>, Intel Corporation
Port:  0, Sequence Count:  4 of 16                                                                             GTPu
  Seq:            Dst MAC           Src MAC          Dst IP            Src IP    Port S/D Protocol:VLAN  Size  TEID
*   0:  3c:fd:fe:9c:5c:d9 3c:fd:fe:9c:5c:d8     192.168.1.1    192.168.0.1/24   1234/5678 IPv4/TCP:0001   64     0
*   1:  3c:fd:fe:9c:5c:d9 3c:fd:fe:9c:5c:d8     192.168.1.1    192.168.0.1/24   1234/5678 IPv4/TCP:0001   64     0
*   2:  3c:fd:fe:9c:5c:d9 3c:fd:fe:9c:5c:d8     192.168.1.1    192.168.0.1/24   1234/5678 IPv4/TCP:0001   64     0
*   3:  3c:fd:fe:9c:5c:d9 3c:fd:fe:9c:5c:d8     192.168.1.1    192.168.0.1/24   1234/5678 IPv4/TCP:0001   64     0













-- Pktgen Ver: 3.2.0 (DPDK 17.05.0-rc0)  Powered by DPDK ---------------
























Pktgen:/> set all seq_cnt 4
Pktgen:/>
``
---------------------------------------------------------------------------
``
| Port 0           <Random bitfield Page>  Copyright (c) <2010-2019>, Intel Corporation
   Index   Offset     Act?  Mask [0 = 0 bit, 1 = 1 bit, X = random bit, . = ignore]
       0        0      No   00000000 00000000 00000000 00000000
       1        0      No   00000000 00000000 00000000 00000000
       2        0      No   00000000 00000000 00000000 00000000
       3        0      No   00000000 00000000 00000000 00000000
       4        0      No   00000000 00000000 00000000 00000000
       5        0      No   00000000 00000000 00000000 00000000
       6        0      No   00000000 00000000 00000000 00000000
       7        0      No   00000000 00000000 00000000 00000000
       8        0      No   00000000 00000000 00000000 00000000
       9        0      No   00000000 00000000 00000000 00000000
      10        0      No   00000000 00000000 00000000 00000000
      11        0      No   00000000 00000000 00000000 00000000
      12        0      No   00000000 00000000 00000000 00000000
      13        0      No   00000000 00000000 00000000 00000000
      14        0      No   00000000 00000000 00000000 00000000
      15        0      No   00000000 00000000 00000000 00000000
      16        0      No   00000000 00000000 00000000 00000000
      17        0      No   00000000 00000000 00000000 00000000
      18        0      No   00000000 00000000 00000000 00000000
      19        0      No   00000000 00000000 00000000 00000000
      20        0      No   00000000 00000000 00000000 00000000
      21        0      No   00000000 00000000 00000000 00000000
      22        0      No   00000000 00000000 00000000 00000000
      23        0      No   00000000 00000000 00000000 00000000
      24        0      No   00000000 00000000 00000000 00000000
      25        0      No   00000000 00000000 00000000 00000000
      26        0      No   00000000 00000000 00000000 00000000
      27        0      No   00000000 00000000 00000000 00000000
      28        0      No   00000000 00000000 00000000 00000000
      29        0      No   00000000 00000000 00000000 00000000
      30        0      No   00000000 00000000 00000000 00000000
      31        0      No   00000000 00000000 00000000 00000000
-- Pktgen Ver: 3.2.0 (DPDK 17.05.0-rc0)  Powered by DPDK ---------------











Pktgen:/>
``
---------------------------------------------------------------------------
-- Example command lines.
``
./app/pktgen -l 0-8 -n 3 --proc-type auto -- -P -m "[1:3].0, [2:4].1, [5:7].2, [6:8].3" -s 0:pcap/large.pcap
./app/pktgen -l 0-4 -n 3 --proc-type auto --file-prefix pg -- -P -m "[1:3].0, [2:4].1, [5:7].2, [6:8].3" -s 0:pcap/test1.pcap -s 1:pcap/large.pcap
./app/pktgen -l 0-4 -n 3 --proc-type auto --file-prefix pg -- -P -m "[1:3].0, [2:4].1, [5:7].2, [6:8].3" -s 0:pcap/test1.pcap -s 1:pcap/large.pcap
./app/pktgen -l 1-3 -n 3 --proc-type auto --file-prefix pg -- -P -m "2.0, 3.1"
./app/pktgen -l 0-8 -n 3 --proc-type auto -- -P -m "[1:3].0, [2:4].1, [5:7].2, [6:8].3"
``

A command line passing in a pktgen/test/set_seq.pkt file to help initialize pktgen with some
default values and configurations. You can also replace the filename using the '-f' command
with a Lua script file ending in .lua instead of .pkt. BTW, if the filename ends in anything
other then .lua it is treated as a .pkt file.

`./app/pktgen -l 0-4 -n 3 --proc-type auto -- -P -m "[1:3].0, [2:4].1" -f test/set_seq.pkt`

-- test/set_seq.pkt
``
seq 0 all 0000:4455:6677 0000:1234:5678 10.11.0.1 10.10.0.1/16 5 6 ipv4 udp 1 128
set all seqCnt 1
``
The set_seq.pkt command file can also be one of the files in pktgen/test directory,
which are Lua based scripts instead of command line scripts as in set_seq.pkt file.

-- test/set_seq.lua
The Lua version is easier to remember the layout of the agruments if you want to
use that one instead of set_seq.pkt file.

``
./app/pktgen -l 0-4 -n 3 --proc-type auto -- -P -m "[1:3].0, [2:4].1" -f test/set_seq.lua`

-- The '--' is a comment in Lua
local seq_table = {			-- entries can be in any order
["eth_dst_addr"] = "0011:4455:6677",
["eth_src_addr"] = "0011:1234:5678",
["ip_dst_addr"] = "10.12.0.1",
["ip_src_addr"] = "10.12.0.1/16",	-- the 16 is the size of the mask value
["sport"] = 9,			-- Standard port numbers
["dport"] = 10,			-- Standard port numbers
["ethType"] = "ipv4",	-- ipv4|ipv6
["ipProto"] = "udp",	-- udp|tcp|icmp
["vlanid"] = 1,			-- 1 - 4095
["pktSize"] = 128		-- 64 - 1518
};
-- seqTable( seq#, portlist, table );
pktgen.seqTable(0, "all", seq_table );
pktgen.set("all", "seqCnt", 1);
``
------------------------------------------------------------------------------------------
-- Two Pktgens running on the same machine with connected via a loopback ports

Look at the two new files pktgen-master.sh and pktgen-slave.sh for some help on
the configuration to run two pktgens at the same time on the same machine.

------------------------------------------------------------------------------------------
-- Socket Support for Pktgen.

Pktgen has a TCP socket connection to allow you to control Pktgen from a remote
program or console. The TCP connection is using port 0x5606 or 22022 and presents
a Lua command shell interface. If you telnet to the machine running Pktgen on port
22022 you will get a lua command shell like interface. This interface does not have
a command line prompt, but you can issue Lua code or load script files from the local
disk of the machine. You can also send programs to the remote Pktgen machine to
load scripts from a remote location.

One method to connect to Pktgen is using telnet, but another method would be to
use 'socat' program on a Linux machine. The socat program is very powerfull application
and can do a lot of things. I used socat to debug Pktgen using the following
command, which gives me a readline inteface to Pktgen's socket interface.

$ socat -d -d READLINE TCP4:localhost:22022

'You will see socat create the connection and then wait for Lua command scripts for you'
To exit this command type Control-D to exit and close the connection.

You can also just send Pktgen a script file and display the ouptut.

---------
$ socat - TCP4:localhost:22022 < test/hello-world.lua

Lua Version: Lua 5.3
Pktgen Version : 3.6.1
Pktgen Copyright : Copyright (c) `<2010-2019>`, Intel Corporation
Pktgen Authors : Keith Wiles @ Intel Corporation

Hello World!!!!
--------

Here is the program I sent Pktgen:

$ cat test/hello-world.lua
package.path = package.path ..";?.lua;test/?.lua;app/?.lua;"

printf("Lua Vesrion: %s\n", pktgen.info.Lua_Version);
printf("Pktgen Version : %s\n", pktgen.info.Pktgen_Version);
printf("Pktgen Copyright : %s\n", pktgen.info.Pktgen_Copyright);
printf("Pktgen Authors : %s\n", pktgen.info.Pktgen_Authors);

printf("\nHello World!!!!\n");
-----------

Here is a command from my Mac Book pro laptop, which loads a file from the local
disk where Pktgen is running and then we execute the file with 'f()'.

------------------
$ socat READLINE TCP4:172.25.40.163:22022
f,e = loadfile("test/hello-world.lua")
f()
Lua Version: Lua 5.3
Pktgen Version : 3.6.1
Pktgen Copyright : Copyright (c) `<2010-2019>`, Intel Corporation
Pktgen Authors : Keith Wiles @ Intel Corporation

Hello World!!!!
<Control-D>
------------------

You can also just send it commands via echo.

-----------------
$ echo "f,e = loadfile('test/hello-world.lua'); f();"| socat - TCP4:172.25.40.163:22022
Lua Version: Lua 5.3
Pktgen Version : 3.6.1
Pktgen Copyright : Copyright (c) `<2010-2019>`, Intel Corporation
Pktgen Authors : Keith Wiles @ Intel Corporation

Hello World!!!!
----------------------

Keith Wiles @ Intel Corporation