summaryrefslogtreecommitdiff
path: root/doc/guides/nics/thunderx.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/guides/nics/thunderx.rst')
-rw-r--r--doc/guides/nics/thunderx.rst26
1 files changed, 13 insertions, 13 deletions
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 187c9a4..e6ac441 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -149,7 +149,7 @@ managed by ``librte_pmd_thunderx_nicvf`` in the Linux operating system.
.. code-block:: console
- ./tools/dpdk-devbind.py --bind vfio-pci 0002:01:00.2
+ ./usertools/dpdk-devbind.py --bind vfio-pci 0002:01:00.2
#. Start ``testpmd`` with basic parameters:
@@ -253,7 +253,7 @@ This section provides instructions to configure SR-IOV with Linux OS.
.. code-block:: console
- ./tools/dpdk-devbind.py --status
+ ./usertools/dpdk-devbind.py --status
Example output:
@@ -275,14 +275,14 @@ This section provides instructions to configure SR-IOV with Linux OS.
.. code-block:: console
- ./tools/dpdk-devbind.py --bind vfio-pci 0002:01:00.1
- ./tools/dpdk-devbind.py --bind vfio-pci 0002:01:00.2
+ ./usertools/dpdk-devbind.py --bind vfio-pci 0002:01:00.1
+ ./usertools/dpdk-devbind.py --bind vfio-pci 0002:01:00.2
#. Verify VF bind using ``dpdk-devbind.py``:
.. code-block:: console
- ./tools/dpdk-devbind.py --status
+ ./usertools/dpdk-devbind.py --status
Example output:
@@ -352,7 +352,7 @@ driver' list, secondary VFs are on the remaining on the remaining part of the li
.. note::
The VNIC driver in the multiqueue setup works differently than other drivers like `ixgbe`.
- We need to bind separately each specific queue set device with the ``tools/dpdk-devbind.py`` utility.
+ We need to bind separately each specific queue set device with the ``usertools/dpdk-devbind.py`` utility.
.. note::
@@ -372,7 +372,7 @@ on a non-NUMA machine.
.. code-block:: console
- # tools/dpdk-devbind.py --status
+ # usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
@@ -416,17 +416,17 @@ We will choose four secondary queue sets from the ending of the list (0002:01:01
.. code-block:: console
- tools/dpdk-devbind.py -b vfio-pci 0002:01:00.2
- tools/dpdk-devbind.py -b vfio-pci 0002:01:00.3
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:00.2
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:00.3
#. Bind four primary VFs to the ``vfio-pci`` driver:
.. code-block:: console
- tools/dpdk-devbind.py -b vfio-pci 0002:01:01.7
- tools/dpdk-devbind.py -b vfio-pci 0002:01:02.0
- tools/dpdk-devbind.py -b vfio-pci 0002:01:02.1
- tools/dpdk-devbind.py -b vfio-pci 0002:01:02.2
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:01.7
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:02.0
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:02.1
+ usertools/dpdk-devbind.py -b vfio-pci 0002:01:02.2
The nicvf thunderx driver will make use of attached secondary VFs automatically during the interface configuration stage.